PROVISION OF COVERED DRAINAGE FOR OR MD ACCN AT 100 BLOCK ASIFNAGAR SPL REPAIRS TO BLDG NO 87 DHOBI GHAT AT MH GOLCONDA AND PROVN OF EMERGENCY GATE WITH PCC ROAD HARD STANDING AT BSO OFFICE GE GOLCONDA

Amount

Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Soft/ Loose soil

Excavation in trenches not exceeding 1.5m deep and not exceeding 1.5m wide for foundation, etc., and not exceeding 10 sqm on plan and not exceeding 1.5m in depth and getting out in soft/loose soil, complete all as specified and directed.

Excavation over areas not exceeding 1.5m deep and getting out in soft / loose soil complete all as specified and directed.

Ditto all as per item No. 3 above but depth exc 1.5 m and n. exc 3.0 m.

M&L Plain cement concrete (1:4:8) type D2 (40mm graded stone aggregate) as in foundation filling and mass concrete etc., complete all as specified and directed.

M & L Brickwork with fly ash bricks, with old size bricks, built in cement mortar (1:6), straight or curved on plan exceeding 6m mean radius, complete, all as specified and directed.

M&L 15mm thick rendering in CM 1:4 on brick or concrete surface finished even and smooth (with out using extra cement) etc complete all as specified and directed.

M&L Plain cement concrete (1:3:6) type C1 (20 mm graded stone aggregate) as in coping including form work, complete all as specifed and directed.

M & L precast cement concrete1:2:4 type B1 (using 20mm graded stone aggregate) in cover slabs (for manholes etc), chajjas, shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed.

S&F for joist, channel, angle or tee sections, fixed independently, witout connecting plates, etc (cut to ordinary lengths i.e within 20mm of the lenghth indicated) Fe 290 (Gde-E-165) etc complete all as specified and directed.

M&L for hardcore using broken stone or boulders not exceeding 63mm deposited, spread and levelled in layers not exceeding 15cm thick, watering and well ramming to a true surface all as specified and directed.

M & L for 75 mm thick, Plain Cement concrete ( 1:3:6) type C-2 (40mm graded stone aggregate), plinth protection finished even and smooth without using extra cement, completed all as specified and directed.

M&L Plain Cement Concrete (1:2:4) type B0 (12.5 mm graded stone aggregate) as in surface channel including form work, complete all as specifed and directed.

M&L polished shabad stone slab for drain cover with thickness 20-25 mm, not exc 600mm in width, etc complete all spd and directed. Note: Length of stone slab shall be as per site requirement.

Taking down existing cement plaster, any description on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L 10mm thick rendering in cement plaster (1:4) on brick or concrete surface, finished even and smooth (without using extra cement) , complete all as specified and directed.

Returning, filling in approved earth including spreading, levelling watering and well ramming in layers n.exc 25cm in foundation in soil complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where didrected at a lavel n.exc 1.5m above the starting point in hard dense soil complete all as spd and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of cement primer, complete all as specified and directed.

M&L Use & waste of form work, rough finished flat, to sides of concrete foundations rafts, footing, base of columns, sides & soffits of foundation etc., complete all as specified and directed.

M&L Reinforced Cement Concrete (1:2:4) type B1 (20 mm graded stone aggregate) as in foundations including rafts, footings and mass concrete, complete all as specified and directed.

M&L Use and waste of form work to sides of pillars, posts, struts, columns and stanchions, fair finished Square, rectangular or polygonal, complete all as specified and directed.

M&L Reinforced Cement Concrete (1:11/2:3) type A1 (20mm graded stone aggregate) in Columns, piers, posts and struts, complete all as specified and directed

M&L Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., complete all as specified and directed.

M&L Mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar.

S & F Mild steel work framed work as in ornamental and intricate design framed and hung gates, including pintle hinges, stops, hand made sliding bolts etc. and similar work confirming to Fe 290 Gde - E - 165 all as specified and directed.

M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and apply two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer all as specified and directed.

M&L 100 mm thick Plain Cement Concrete (1:2:4) type B2 (40mm graded stone aggregate) for footpath/ hardstanding finished even & smooth without using extra cement all as specified and directed.

Dismantling of single layer Mangalore pattern tiles or similar tiles in roofing, complete all as specified and directed..

Dismantling ballies, hard or soft wood any position, except in post or struts, incl taking out iron straps, bolts and nuts etc if any, complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section, in unframed work, complete all as specified and directed.

Dismantling timber scantling under 40 Sqcm in section from unframed work, complete all as specified and directed.

S & F roof trusses (framed), trussed, purlins, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to FE - 500 complete, all as specified and directed.

M&L forming construction joint 30 mm deep x 10 mm wide filled with sealing compound grade 'A'.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F of Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F true horizontal level 600x600mm panels false ceiling system using hot dipped galavnized steel sections exposed surface with pre-coated capping, main tee of size 24x32mm at every 1200mm c/c and wall angle of size 19x19mm fixed to perimetre wall, the complete grid is to be suspended at every 1200mm interval at the main Tee using fine finished tagular edge, including 9mm thick Gypsum boards of size 600x600mm with rear side aluminium fril and front side PVC lamination, including dismantling of existing false ceiling grid and boarding of any description, complete all as specifid and directed.

M&L for walling of random rubble masonry built in cement mortar (1:4), coursed, Secunderabad type all as specified and directed.

M&L for rendering 15mm thick plastering in cement mortar (1:6) for fair finished surfaces without using extra cement, complete all as specified and directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sqm each complete all as specified and directed

M&L 2nd class hard wood plain framed factory made panelled door shutters, 35 mm thick (two or three panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces, the size of rail & style as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F 100 mm MS butt hinges, cast brass, with mild steeel hinge pin bright polished and fixed, type B-11 complete all as specified and directed.

S&F mild steel barrel tower bolts 200 mm long of stove enamelled black, fixed with bright bolt complete all as specified and directed.

S&F mild steel handles 150 mm long of oval type, stove enamelled for door fixed with stainless steel screws complete all as specified and directed.

S&F 300mm long mild steel sliding door bolts, plate type, stone enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

M&L for preparation of old surfaces on wooden of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified

M&L for preparing old plastered surface of wall and apply one coat of white wash all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for prepartion of new plastered surface of wall and applying 3 coats of white wash complete all as specified and directed

Supply only broken bricks of gauge exc 63mm and n.exc 100 mm, etc complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/ floors and fix with PVC adhesive complete all as specified and directed.

SANTHAM TRADERS

SAI RAM CONSTRUCTIONS

Bidder Name

STANDARD AGENCIES