COMPREHENSIVE REPAIR ANDMAINT TO FLOORING, PLASTERING AND ROOFING IN CERTAIN BLDGS IN AGE BR-I AREA AND REPAIR AND MAINT OF ROAD FURNITURE AND SIGN BOARDS UNDER GE SAUGOR

Amount

Dismantling unframed timber scantlings 40 sqcm & over in section, in any position complete all as specified and directed.

M&L for structural steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

M&L for structural steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

M&L for mild steel for wind ties for roof including securing bolts, posts including all necessary drilling, bolting or riveting, etc & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed

M&L for MS plates (plain or chequered) channels square cut to or notched forming holes with riveted bolted or welded attachment for Fe-410W complete all as specified and directed.

M&L for mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 22.5cm but not exc 30cm long, dia of shank 16 to 20 mm complete all as specified and directed..

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed.

S&F 0.50 mm thick galvalume sheet profile pattern precoated coloured having tensile strength 550 Mpa as in roof covering, fixed with self driving screws including dismantling of GI sheets complete all as specified and directed Make:-Durashine manufactured by Tata BlueScope Steel/JSW Colouron+ or equivalent make as approved by GE

S&F 0.50 mm thick galvalume sheet precoated coloured profile ridge, fixed with self driving screws including dismantling of GI sheets ridge complete all as specified and directed. Make:-Durashine manufactured by Tata BlueScope Steel/JSW Colouron+ or equivalent make as approved by GE

M&L for brickwork with subclass 'B' bricks, straright or corved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of brick work or rubbled stone masonry including all qoins arches , pillars etc built in cement mortar and removing rubbish from site complete all as specified and directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and removing rubbish from site complete all as specified and directed

M&L for rendering 20 mm thick cement plaster in cement mortar 1:4 on stone masonary fair faces / other than fair faces finished surfaces of brick wall finishing the surfaces even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15mm thick cement plaster on wall in cement mortar 1:6 on brick wall / concrete surfaces of finishing the surfaces even and smooth without using extra cement complete all as specified and directed

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and directed .

M&L for preparing the new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed

M&L for preparing the old decorated surfaces and applying two coats of white wash on walls complete all as specified and directed

M&L for prepration of new wall surfaces & applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces including properly making 'V' shaped crakes and filling of all crakes with crakes seal of walls and applying two coat of interior emulsion distemper over a coat of wall primer incl. preparation of surfaces of walls complete all as specified and directed

M&L for complete removal of existing treatment on wall and prepration of old surfaces & applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces including properly making 'V' shaped crakes and filling of all crakes with crakes seal of walls and applying two coat of interior emulsion distemper over a coat of wall primer including preparation of surfaces of walls complete all as specified and directed

M&L for applying two coats exterior weather coat over one coat of exterior primer including preparation of surfaces of new walls complete all as specified and directed Make:- Asian Ace or equivalent make as approved by GE

M&L for applying one coats exterior weather coat including preparation of surfaces of old walls complete all as specified and directed Make:- Asian Ace or equivalent make as approved by GE

M&L for applying three coats of white wash on new plastered ceiling surface including preparation of surface complete all as specified and directed

M&L for applying two coats of white wash on old decorated ceiling surface including preparation of surface complete all as specified and directed .

Demolition of cement concrete in ground floors and pavings not exc 15cm below or above ground floor and removing rubbish from site complete all as specified and directed

M&L for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregates) as in plinth protection 75mm thick finishing cement concrete surfaces finished even & smooth without using extra cement joints to be filled with sealing compound grade 'A' complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in mass concrete as in foundation filling and mass concrete complete all as specified and directed

M&L for 25 mm thick PCC (1:2:4) type B1 (using 20 mm graded stone aggregates) as in sub base of floor to receive tiles or kota stone complete all as specified and directed

M&L for glazed coloured ceramic tiles of size 450mmx 300mm x 7mm to 8mm thick , joint free (rectified) on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match laid over and including 10mm thick rendering in CM 1:4 including dismantling of wall tiles with cement mortar bedding and rubbish off the premises complete all as specified and directed .

M&L for coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.18 sqm but not exc. 0.36 sqm as in floor set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match laid over and including 15mm thick screed bed in CM 1:6 including dismantling of floor tiles with cement mortar bedding and rubbish off the premises complete all as specified and directed

M&L for coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.18 sqm but not exc. 0.36 sqm as in skirting, dado & jointed in neat cement slurry and pointed in white cement mixed with pigment to match laid over and including 10mm thick rendering in CM 1:4 including dismantling of floor tiles with cement mortar bedding and rubbish off the premises complete all as specified and directed

M&L for 600mm x 600mm x 8mm to10mm thick coloured vitrified tiles in floors set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the tiles laid over and including 15mm thick screed bed in CM 1:6 including dismantling of floor tiles with cement mortar bedding and rubbish off the premises complete all as specified and directed

M&L for 600mm x 600mm x 8mm to10mm thick coloured vitrified tiles in skirting , dado & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the tiles laid over and including 10mm thick rendering in CM 1:4 including dismantling of wall tiles with cement mortar bedding and rubbish off the premises complete all as specified and directed

M&L for coloured designer tiles exterior grade ( ENDURA OR equivalent make as approved by GE ) 10 mm thick laid over and including 15mm thick cement mortor 1:6 set and jointed in floor and pointed in neat cement slurry with grey cement and pigment in floor including dismantling of floor tiles with cement mortar bedding and rubbish off the premises complete all as specified and directed

M&L for mirror polished machine cut Kota stone slab flooring 18-20 mm thick size not less then 550X550 mm over 20 mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing including dismantling of floor tiles with cement mortar bedding and rubbish off the premises complete all as specified and directed

M&L for Kota stone slab 12mm to 15mm thick in skirting laid over and including 15mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing including dismantling of wall tiles with cement mortar bedding and rubbish off the premises complete all as specified and directed

M&L for machine pressed precast cement concrete coloured chemically treated interlocking paver block any shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment laid over and including 25mm thick uniformly levelled surface of stone dust cushioning including dismantling of floor tiles with cement mortar bedding and rubbish off the premises complete all as specified and directed .

M&L for 18mm to 20mm thick Granite slab of any shade ( table rubbed and polished ) as in steps, jambs, pillars, windowcills, cooking plateforms and like laid over and including 15mm thick cement mortor 1:4 set jointed in neat cement slurry with fastners including pointing in white cement mixed with pigment to match shade of the slabs including dismantling of old existing Granite slabcomplete all as specified and directed complete all as specified and directed

M&L for rounding/ chamferring to edges of stone slabss one edge , such as in steps, cooking plateform and other similar situations complete all as specified and directed

M&L for cement concrete 1:2:4, type B0 ( using 12.5mm graded stone aggregates ) as in coping , apex stone , bed plate , kerbs including weathering , slightly rounded or chamferred angles and throating and including necessary form work complete all as specified and directed

S&F GI ( cold rolled) snap grid size of 600mm x 600 mm frame work of 24 x 38 x 0.60 mm, Tee Section ( bottom pre coated ) and 24 x 24 x 0.5 mm thick angle rung along the wall incl GI suspenders wire as per manufacturer instruction as in ceiling with and including S&F white Non Asbestos designer ceiling cement boards 4 mm thick including demolition of existing ceiling boards (fiber, pulp, insulation, etc.) or insulation board/slabs/blankets, any thickness including frames complete all as specified and directed .

Dismantling of old u/s road sign board of any shape and size complete all as specified and directed.

S&F stainless steel of Grade 304 of circular/square section including plate/sheets/decorative items like dooms, cover cups etc as in frame work for road sign board complete all as specified and directed

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in mass concrete, finshed fair and even without using extra cement complete all as specified and directed.

S&F recto reflective sign face (Square or rectengular ) consist of 4mm thick aluminium composite panel sheet sign substrate and over all lamination using high intensity grade recto reflective media 3M or Unicorp make conforming to ASTM 4956 type -IV or above with text cutting as per direction of Engr-in-Charge using computerised cutter plotter & pneumatic automated squeeze roll applictor ) on overlay film or similar sheetng for text /graphics & symbol etc as per approved design and aluminum rivets, break away type nut/bolts (each sign face shall be tacked by staineless steel frame) complete all as specified and directed. Note:-stainless steel items sahll be measured and paid separately

S&F in repairs recto reflective sign face (Square or rectengular ) consist of 4mm thick aluminium composite panel sheet sign substrate and over all lamination using high intensity grade recto reflective media 3M or Unicorp make conforming to ASTM 4956 type -IV or above with text cutting as per direction of Engr-in-Charge using computerised cutter plotter & pneumatic automated squeeze roll applictor ) on overlay film or similar sheetng for text /graphics & symbol etc as per approved design and aluminum rivets, break away type nut/bolts complete all as specified and directed.

S&F in repairs of ABD/EPDM modular speed breaker size 400X50X250 mm rectangular shape fixed on road with bitumen adhesive and dash fastener nails/bolts as per manufacturer instructions having abrasion resistance ceramic coating and reflective surface complete all as specified and directed.

S&F in repair bi-directional reflective type road studs (Cat Eye) illumineted yellow both sides of rectengular/square shape makeup of thermo plastic body fixed with Epoxy adhesive and supported with 2 Nos 6mm MS Screw complete all as specified and directed by Engineer-in-charge. Make:- Birla 3M / Kataline or equivalent make as approved by GE.

S&F in repair delenater DA-952 GP of size 700x100 x50 mm ABS round body fitted with 100 mm dia hightly reflective ,UV stabilized in yellow colour mounted on MS pipe 50 mm dia, provided with anti rust & anti theft. including PCC foundation of size 150x150x300 mm with PCC 1:3:6 type C1 incl necessary earthwork excavation in any soil, removal and disposal of spoil complete all as specified and as directed by Engr-in-Charge. Make: Dark Eye or equivalvent model from TATA BP/ Birla 3M

S&F in repair superior quality solar delineators, which can be mounted on a pole, cone etc to warn motorists from a distance of an approaching crossovers, flyovers Cat Part No. SKU: DA-112-(SOLAR-DELINEATOR) etc.including PCC foundation of size 150x150x300 mm with PCC 1:3:6 type C1 incl necessary earthwork excavation in any soil, removal and disposal of spoil complete all as specified and as directed by Engr-in-Charge. Make: Dark Eye SKU: DA-112-(SOLAR-DELINEATOR) or equivalent make as approved by GE

S&F in repairs of water proof, energy saving and environmetally friendly road stud with solid aluminium alloy shell power by solar cells and panels, ideal signal products for highways, parking lots, roads and similar isolated or stand alone traffic applications and fixed with epoxy hardner adhesive comprising the following complete all as specified and directed:- Make Birla 3M/ Dark eye/ Kataline

Aluminium alloy shell

Solar panel mono-crystalline solar 2.4 ZV /0.3 watt

One Ni-Mh or Ni-cd rechargeable batt (1.2 V/1600mA)

Six super bright LEDs

Colour - yellow, red, blue, green and white

Working time 50 to 60 hours successively after battery is fully charged

Solar energy -based power source

Charging time : five to six hours / day

Brightness sensitive auto switch automatically turns on at night & turn off at dawn

High visibility LEDs to help easy and safe night driving

EX SERVICE MEN SECURITY AND MAN POWER SERVICES

pal enterprises

A Raza Enterprises

maharaja construction and suppliers