PITC of 2 nos 10 HP Openwell Submersible Pumpset in proposed underground PVC tank at backside of BSNL Admin Bldg Santacruz Mumbai.

Amount

Supplying Installation testing & commissioning of 10 H.P capacity horizontal type submersible pumpset for 48 metre head in open well suitable for operation on 415 volts 50 Hz, 3 phase AC supply etc complete as reqd.( M/s Crompton model no. OWNH10.2 or SS model of Kirloskar/KSB or Calama make)

Supplying and fixing of following size Class 'C' GI Pipe compeleted with threading and jointing with coupling, bend, union from pump and suction / discharge line complete as reqd.(ISI mark)

a) 50 mm dia

Supplying and fixing of 12 mm dia Nylon rope for lowering of Submercible pumpset complete etc as required.arging in the existing AC Package unit i/c testing etc as reqd

Supplying and fixing PVC/ XLPE insulated and PVC sheathed industrial 3 core 10 sq mm flat submersible cable with bare bunched copper conductor with voltage grade 1100 Volts from existing DB / Pump panel to 10 HP open well Submersibe pump complete etc as required.

Supplying and fixing of 50 mm dia brass Non Return Valve in the existing delievery pipe line i/c threading the GI pipe etc. complete as required

Supplying and fixing of 50 mm dia full opening brass Wheel valve in the existing delievery pipe line i/c cutting, threading the GI Pipe etc. complete as required

Supplying and fixing following ways surface / recess mounting, vertical type, 415V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200A tinned copper busbar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required (Note: Vertical type MCB TPDB is normally used where 3 phase outlets are required.) a) 4 Way (4 + 12), Double Door

Supplying and fixing 63A rating, Triple pole and neutral, 415V, Miniature Circuit Breaker in the existing MCB DB complete with connections, testing and commissioning etc as reqd.

Supplying and fixing 63A rating, 240/415V, 10kA, "C" Curve miniature Circuit Breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required a) Triple Pole

Supplying and laying of 4 core x 50 sq mm PVC insulated and PVC sheathed aluminium conductor armoured cable on surface of wall as required.

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE alumnium conductor cable of 1.1 Kv grade reqd. a) 4 core x 50 sq.mm.

S/L of 6 SWG GI wire on surface or in recess for loop earthing etc complete as required

vaibhav enterprises