REPAIR, MAINT AND REWINDING OF CEILING FANS/ EXHAUST FANS AND GEYSERS ALL ACCESSORIES AND REPAIR/ REPLACEMENT OF INTERNAL WIRING SUB MAIN AND FITTING AND FIXTURE AND ALLIED WORKS AT RAJBARI AREA DIMAPUR UNDER AGE E/M OF GE 868 EWS

Amount

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/buzzer, bell push, lamp holders, regulators, sockets, light fittingsetc. removing materials from site and making good to the disturbed surfaces of walls, ceiling floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.

M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connecting to earth dolly, including PVC rectangular box for mounting switches/sockets/regulators etc. with 3mm thick plastic laminated sheet cover of suitable size as required at site and 50 mm deep complete all as specified and as directed. Make: Richa/KEI/Finolex/Polyacab Make of caping/casing & PVC boxes: Prestoplast/finolex/Supreme/Richa

One light/Ceiling fan/Exhaust fan controlled by one, one way switch.

One 3 pin socket outlet 6 Amps on the same board with other switches.

One 3 pin socket outlet 6 Amps on the switch socket combination.

One bell point controlled by one, one way switch .

All as per item No- 2 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. Make: Richa/KEI/Finolex/Polyacab Make of caping/casing & PVC boxes: Prestoplast/finolex/Supreme/Richa.

M&L for Switch Piano, flush type single pole, one way 5 Amps complete all as specified and directed. Make:-Anchor/Legrand/Kinjal

M&L for Socket outlet, 2 in 1, 5 pin 6A flush type Make:-Anchor/Legrand/Kinjal

M&L for Switch Socket combination, 2 in 1, 5 pin 6A flush type complete all as specified and directed. Make:-Anchor/Legrand/Kinjal

M&L for Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type complete all as specified and directed. Make:-Anchor/Legrand/Kinjal

M&L for stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet etc. Make:-Anchor/Legrand/Kinjal

M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed. Make:-Anchor/Legrand/Kinjal

M&L for replacement of Bell AC 230 volts musical type. Make:-Anchor/Legrand/Kinjal

M&L for bell push switch 5 amps piano type flush type Make:-Anchor/Legrand/Kinjal

Repair/Replacement for Lamp holder(Penta, Batten,Angle Type) PVC/Polycarbonate type with back plate suitable for batten fittings incl taking down complete all as specified and directed.

Repair/Replacement for Switch Piano, flush type single pole, one way 5 Amps incl taking down complete all as specified and directed. Make:-Anchor/Legrand/Kinjal

Repair/Replacement for Socket outlet, 2 in 1, 5 pin 5A flush type incl taking down complete all as specified and directed Make:-Anchor/Legrand/Kinjal

Repair/Replacement for Switch Socket combination, 2 in 1, 5 pin 6A flush type incl taking down complete all as specified and directed. Make:-Anchor/Legrand/Kinjal

Repair/Replacement for Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type incl taking down complete all as specified and directed. Make:-Anchor/Legrand/Kinjal

Repair/ReplacementL for stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet etc incl taking down complete all as specified and directed. Make:-Anchor/Legrand/Kinjal

M&L for 20W LED, 4', Wall mounted LED batten, with LED tube Rod extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same on and including two Nos PVC blocks and connecting up with flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose to the light fitting incl taking down complete all as specified and as directed. Make : Havells/Wipro/Bajaj/Philips/CGHavells Cat No T5UPTO1X18WDSBSWH Regal (batten) & 18WLED865SGLASS (LED Tube)

M&L for 20W LED 4' tube Rod for Single side connection suitable batten light fitting incl taking down complete all as specified and directed Make :Havells/ Wipro/Bajaj/Philips/CG

All as per item No 19.00 above but 09 watt LED 2', wall mounted with polycarbonate housing/batten incl taking down complete all as specified. Make : Havells/Wipro/Philips/Bajaj/CG

M&L for LED 1 x 20W Security light fitting, drawn through including GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling holes as required and connecting up with flexible copper cable of suitable size from ceiling rose to the light fitting incl taking down complete all as specified and directed Make :Havells/Wipro/Bajaj/CG/Philips

M&L in replacement for decorative wall mounted light fitting made up of polycarbonate including 9 watt LED lamp with B-22 base including taking down old unsv light fitting complete all as specified and directed.Make : Havells/Wipro/Bajaj/Philips/CG

M&L for Lamp holder , PVC/ Polycarbonate type with PVC round/square block incl 9 watt LED lamp suitable for lamp holder fittings incl taking down old unsv light fitting. Make : CG/Bajaj/Philips/Wipro Make LED lamp :Philips/CG/Bajaj

Supply, laying, connecting and testing XLPE insulated (Earthed) cable in trenches/ or fixed on pole etc. in screened PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor, 11000 Volt grade, cross sectional area 35 Sq mm, 3.5 Core Conforming to IS-7098 (Part-II)-1985 incl taking down complete all as specified and as directed. (Note: Excavation & earth work shall be measured and paid separately under relavant item of schedule.)

Ditto all as per item No.24.00 above, but size of cable 50 sqmm 3.5 core

Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of poles, cable etc, not exc 10 sqm on plan and getting out in soft/loose soil including taking out brick protection etc complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and as directed.

Removing excavated materials (soils) not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and as directed.

Supply and spread sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide required cover after punning down complete all as specified and as directed. (Note: Only compacted thickness after punning will be measured and paid)

M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed

M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed. NOTE:- (i) The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1,RCC 1:2:4 type B-1, CI cover 10 mm thick, funnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 441 of MES SSR Part-II. (ii) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately.

Taking down and Supply and fixing sub-main wiring with PVC insulated & unsheathed two run of 4.0 Sqmm single core multi stranded copper conductor cable (FRLSH) 1100 Volt grade along with one run of 4.0 Sqmm PVC insulated & Unsheathed copper conductor cable (FRLSH) 1100 Volt grade connected to common earth dolly as earth continuty conductor, drawn through 20 mm dia PVC Casing Caping after and inclduing taking down existing submain wiring complete all as specified and as directed Note:- Two runs of 4.0 Sqmm cable one run 4.0 Sqmm Make : Richa/Finolex/RR Kabel.Make of caping/casing & PVC boxes : Prestoplast/finolex/Supreme

All as per item No 32.00 above but sub main wiring with two runs of 2.5 Sq mm and one run of 2.5 Sq mm for earth wire with multi standard copper conductors FRLSH quality, 1100 volts grade,complete all as specified and as directed.Make : Richa/Havells/RR Kabel NOTE:- two runs of 2.5 Sq mm + one run of 2.5 Sq mm and one run of PVC Conduit and its accessories of suitable size shall be measured as one unit length.

M&L for MCB Distribution board double door type SPN 8 way sheet steel powder painted with bus bar neutral link & earth din rail, recessed with wall surfaces by chase cutting and making good disturbed surfaces of wall incl taking down complete all as specified and as directed. Make : Legrand Cat No 507611 or equivalent in ABB/Siemens

All as per item No 34 above but SPN 4 Way Make : Legrand Cat No 507610 or equivalent in ABB/Siemens

All as per item No 34 above but SPN 2 Way Make : Legrand Cat No 507791 or equivalent in ABB/Siemens

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN 63 AMP and current carrying capacity in the DB 'C' series, complete with connection testing and commissioning all specified and as directed. Make:Legrand/ ABB/Siemens.

S&F for MCB 40 Amps SPN 240 Volt 'C' series,incl unsv taking down complete all as specified and directed. Make:Legrand Cat No 408617 or equivalent in ABB/Siemens.

All as per item No 38 above, For MCB 63 Amps SPN 240 Volt 'C' series. Make:Legrand Cat No 408620 or equivalent in ABB/Siemens.

All as per item No 38 above, for MCB SP 5 To 32 Amps, 240 Volt 'C' series. Make:Legrand Cat No 408587 to 95 or equivalent in ABB/Siemens.

Replacement of MCCB 125 Amps 4 pole 16 KA complete as specified and as directed. Make : Legrand cat No 420016 or equivalent to ABB/Siemens

S&F 1100 Volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hanger not more than 1 meter apart including 4 mm suspension wire one twine core cable flat or circular stranded conductor of size 4 Sqmm incl taking down complete all as specified and directed. Make : Richa/Finolex/Polycab

All as per item No 42.00 above but 6 Sqmm twine core cable.

All as per item No 4200 above but 10 Sqmm twine core cable.

All as per item No 42.00 above but 16 Sqmm twine core cable.

Taking down ceiling fan, exhaust fan, sealing cable end, dismantling blades and removing fan and blades to store

Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as directed by Engr-in-Charge

Dismantling and taking out burnt copper winding from ceiling fan of sweep 1200mm any make, model, type and rewinding the same with new super enameled copper wire of similar gauge and number of turns as exists for full speed, including cleaning and greasing of bearing/bushes, taping, varnishing, heating and replacement of defective parts and reassembling of fan motor and refixing the fan after testing complete to the entire satisfaction of the Engr-in-Charge. Note:- Contractor shall arrange repair/rewinding of ceiling fans work in RMS area with suitable winding machine and connected acessories. Spare parts shall be measured and paid under respective items of Sch 'A'.

All as per item No 48above but ceiling fan of sweep 1400mm

Dismantling and taking out burnt copper winding from wall cabin fan/table fan of sweep 400 of any model and type and rewinding the same with new super enameled copper wire of similar gauge and number of turns as exists for full speed, including cleaning and greasing of bearing/bushes, taping, varnishing, heating and replacement of defective parts and reassembling of fan motor and refixing the fan after testing complete to the entire satisfaction of the Engr-in-Charge. Note:- Contractor shall arrange repair/rewinding of wall cabin fan/table fan of sweep 400 of any model and type in Rajabari area with suitable winding machine and connected acessories. Spare parts shall be measured and paid

Dismantling and taking out burnt copper winding from exhaust fan of 450mm sweep, make, model and type and rewinding the same with new super enameled copper wire of similar gauge and number of turns as exists for full speed, including cleaning and greasing of bearing/bushes, taping, varnishing, heating and replacement of defective parts and reassembling of fan motor and refixing the fan after testing complete to the entire satisfaction of the Engr-in-Charge. Note:- Contractor shall arrange repair/rewinding of in Rajabari area with suitable winding machine and connected acessories. Spare parts shall be measured and paid

All as per item No 51.00 here-in-before but for exhaust fan of 300mm sweep, make, model and type

Taking down and Supply and fixing Exhaust fan PVC 150 mm sweep single phase 50 Hz AC, air flow rate of 1350 RPM including fixing on wall with suitale fastners, making holes of suitable size and making good distrubed surfaces area complete all as specified and directed by Engr-in-Charge. Make : Richa/Bajaj/CG/V-Guard Note : Old Exhaust fan deposit for MES AGE(E/M) Store

All as per item No 53.00 200 mm sweep single phase 50 Hz AC Make : Richa/Bajaj/CG/V-Guard

All as per item No 53.00 250 mm sweep single phase 50 Hz AC Make : Richa/Bajaj/CG/V-Guard

All as per item No 53.00 300 mm sweep single phase 50 Hz AC Make : Richa/Bajaj/CG/V-Guard

Taking down and Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) Complete all as specified and directed by Engr-in-Charge. Make : Richa/Bajaj/Usha/CG/Orient Note : Old Ceiling fan deposit for MES AGE(E/M) Store.

Preparation of old painted surface of Exhaust fan of any sweep, model and make by using chemicals, wire bush, etc to make smooth surface and apply two coats of synthetic enamel paint (first quality) by spraying similar to existing colour of the Exhaust fan, motor, blades (set of 3), etc including, complete all as directed by Engr-in-Charge

Fan capacitor of capacity 2.5 MFD (Make: Universal/Usha)

Fan capacitor of capacity 4.0 MFD (Oil filled) Make Universal/ Usha.

Ball bearing suitable for ceiling fan/Exhaust Fan, of any sweep. Make of bearing-TATA,NBC,SKF (6201to 6204)

Fan clamp MS including nut, bolt, rubber reel, split pin complete of suitable size 1200/1400 mm

Cable with copper conductor PVC round sheathed (flexible) industrial cable of size 2.5 Sqmm. Make Plaza/Richa/RR Kabel

Top/bottom canopy suitable for ceiling fan of any sweep, make, model and type. Set of two

Ceiling fan 1200mm Sweep Rotor ring reel small/big size all as directed by Engr-in-Charge.

Down rod made out of GI tubing medium grade with both side thread & hole of 15mm two feet long

Dismantling of storage type water heater (Geyser) of 25/35/50 ltrs capacity, any make, vertical or horizontal type, mounted on wall by disconnecting electric and water supply connection and keeping the same in safe custody for carrying out necessary repair/replacement of UNSV parts/components including descaling of the geyser tank by using proper liquid chemical and re-assambling & refixing the same all as directed by the Engr-in-Charge. Note: UNSV items for renewal shall be measured and paid seprately under respective itme here-in- after as supply only. Make: Jilco/Havells/Indosian)

Supply & fixing following items for water heater and geyser of any type model and make all as directed by Engr-in-Charge.

Rubber washer for fixing the apparatus plate to inner container suitable to existing storage type water heater of same make and size.

Heavy duty PK Aqua 2 feet hot water connection for geyser hose pipe both cold/hot of set water line with adopter and washer at both ends of the pipe.

Clamp for fixing the heating elements to the apparatus plate.

Indicator lamp round/rectangular.

Thermostat for geyser 30 to 75 degree centigrade. Make: Thecha/DasPass/Victor

Push type copper heating element of 1.5 KW capacity.

All as per item No 2(f) above but push type 2.00 KW capacity.

Copper Heating element, screwed type, 1.5/2KW capacity. Make: Thecha/DasPass/Victor

Cable copper conductor multistranded 3 core PVC insulated of size 36/.30. Make : Richa/ finolex/RR Kabel

Glass wool in between outer cell and container.

Inner copper container for geyser of capacity 25 ltr, any make any type

Inner copper container for geyser of capacity 50 ltr, any make any type

Assemblly for water heater 25 ltr capacity of any make and type

Assemblly for water heater 50 ltr capacity of any make and type

Switch socket combination 5 pin,15 Amp multipurpose

15 Amp plug Top suitable for 15 amp socket

2.5 sqmm 3 core copper cable connecting for plug top to Geyser

Cleaning of geysers any type and size/make all as specified and directed by Engr-in-Charge.

Only Fixing Geyser of any capacity, complete with etc and all accessories and connection

S & F of metal fasteners of 12mm dia complete as specified and as directed. Make : Anchor

S&F for PVC switch board 7"x4" in size suitable for electrical connetion complete all as specified and directed. Make : Richa/ ABB/ Presto Plast

S&F for replacement of PVC casing & caping 20mm one length 3meter complete as specified and as directed Make : Presto plast/Supreme/Richa

All as per item No 70.00 of PVC Casing caping 25mm Make : Presto plast/Supreme/Richa

NAGALAND AGENCIES CO

M/S NIYATI NETWORK

M/S BIJOYA LAXMI ENTERPRISE

das enterprises

SAYED ALI AND SONS

commercial enterprises