PROVN OF DG SETS FOR STP AT MEERUT CANTT UNDER GE(SOUTH) MEERUT

Amount

Supplying, installation, testing and commissioning of silent diesel engine driven generating set 415volts, 3 phase 4 wire engine as per IS: 10001/10002 and alternator as per IS: 13364 complete with necessary foundation as per manufacturer recommendations,AVM pads, control panel with necessary meters and sound proof canopy of capacity up to 82.5 KVA complete all as specified and directed for the following specifications :- (A) DIESEL ENGINE. Water cooled, 4x cylinder (102 BHP) developing suitable BHP @ 1500RPM. Engine shall be cooled by rail mounted, engine driven radiator of adequate capacity, with blower fan, fan guard, fan belts etc. The diesel engine shall be vertical, to run continuously at 1500 RPM confirming to IS 10002, BS-5514, standard with an overload capacity of 10% for one hour in every 12 hrs of operation. Diesel engine shall comply with latest CPCB norms. Make of Engine-CUMMINS, KIRLOSKAR, GREAVES COTTON Ashok Leyland. (B) ALTERNATOR. Alternator 82.5 KVA, suitable to deliver rated output at 1500 RPM, 415V, 0.8 PF (LOG), 50HZ, 3 PH, in SPDP enclosure, self-excited & regulated electronic governor . The alternator shall conforms to IS-13364 & shall be suitable for tropical condition. Full load efficiency of the alternator offered should be above 90%, insulation and temperature rise also limited to class H. Enclosure shall conform to IP-23. Make of Alternator - KIRLOSKAR, STEMFORD, JYOTI, CROMPTON GREAVES, NGEF.(C) STANDARD CONTROL PANEL. Totally enclosed, steel construction control panel comprising of following :- (i) Main on /off MCCB 3 phase 4 pole 415 volt 50 Hz 125 Amp taring 25 KA-01 No. (ii) Phase indicating lamps set of three-01 No. (iii) Instrument fuses -01 Set . (iv) Digital display/indication of engine and alternator parameters as mentioned below shall be available :- (a) Lube oil pressure. (b) Battery voltage. (c) Engine RPM. (d) Fuel level in the tank. (e) Engine running hours indication. (f) AC current and voltage. (g) AC Frequency. (h) AC Power metering. (j) Suitable CTS for displaying the electrical parameters.

Supplying, installation, testing and commissioning of silent diesel engine driven generating set 415volts, 3 phase 4 wire engine as per IS: 10001/10002 and alternator as per IS: 13364 complete with necessary foundation as per manufacturer recommendations, AVM pads, control panel with necessary meters and sound proof canopy of capacity up to 62.5 KVA complete all as specified and directed for the following specifications :- (A) DIESEL ENGINE. Water cooled, 4x cylinder (83 BHP) developing suitable BHP @ 1500RPM. Engine shall be cooled by rail mounted, engine driven radiator of adequate capacity, with blower fan, fan guard, fan belts etc. The diesel engine shall be vertical, to run continuously at 1500 RPM confirming to IS 10002, BS-5514, standard with an overload capacity of 10% for one hour in every 12hrs of operation. Diesel engine shall comply with latest CPCB norms. Make of Engine-CUMMINS, KIRLOSKAR, GREAVES COTTON Ashok Leyland. (B) ALTERNATOR. Alternator 62.5 KVA , suitable to deliver rated output at 1500 RPM, 415V, 0.8 PF (LOG), 50HZ, 3 PH, in SPDP enclosure, self-excited & regulated electronic governor . The alternator shall conforms to IS-13364 & shall be suitable for tropical condition. Full load efficiency of the alternator offered should be above 90%, insulation and temperature rise also limited to class H. Enclosure shall conform to IP-23. Make of Alternator - KIRLOSKAR, CATTERPILLAR, STEMFORD, JYOTI, CROMPTON GREAVES, NGEF. (C) STANDARD CONTROL PANEL. Totally enclosed, steel construction control panel comprising of following :- (i) Main on /off MCCB 3 phase 4 pole 415 volt 50 Hz 100 Amp taring 25 KA-01 No. (ii) Phase indicating lamps set of three-01 No. (iii) Instrument fuses -01 Set . (iv) Digital display/indication of engine and alternator parameters as mentioned below shall be available :- (a) Lube oil pressure. (b) Battery voltage. (c) Engine RPM. (d) Fuel level in the tank. (e) Engine running hours indication. (f) AC current and voltage. (g) AC Frequency. (h) AC Power metering. (j) Suitable CTS for displaying the electrical parameters.

Supplying, installation, testing and commissioning of silent diesel engine driven generating set 415volts, 3 phase 4 wire engine as per IS: 10001/10002 and alternator as per IS: 13364 complete with necessary foundation as per manufacturer recommendations,AVM pads, control panel with necessary meters and sound proof canopy of capacity up to 40 KVA complete all as specified and directed for the following specifications :- (A) DIESEL ENGINE. Water cooled 3/4 cylinder (Not below than 52 BHP) developing suitable BHP @ 1500RPM. Engine shall be cooled by rail mounted, engine driven radiator of adequate capacity, with blower fan, fan guard, fan belts etc. The diesel engine shall be vertical, to run continuously at 1500 RPM confirming to IS 10002, BS-5514, standard with an overload capacity of 10% for one hour in every 12hrs of operation. Diesel engine shall comply with latest CPCB norms. Make of Engine-CUMMINS, KIRLOSKAR, GREAVES COTTON Ashok Leyland. (B) ALTERNATOR. Alternator 40 KVA , suitable to deliver rated output at 1500 RPM, 415V, 0.8 PF (LOG), 50HZ, 3 PH, in SPDP enclosure, self-excited & regulated electronic governor . The alternator shall conforms to IS-13364 & shall be suitable for tropical condition. Full load efficiency of the alternator offered should be above 90%, insulation and temperature rise also limited to class H. Enclosure shall conform to IP-23. Make of Alternator - KIRLOSKAR, STEMFORD, JYOTI, CROMPTON GREAVES, NGEF.(C) STANDARD CONTROL PANEL. Totally enclosed, steel construction control panel comprising of following :- (i) Main on /off MCCB 3 phase 4 pole 415 volt 50 Hz 63 Amp taring 16 KA-01 No. (ii) Phase indicating lamps set of three-01 No. (iii) Instrument fuses -01 Set . (iv) Digital display/indication of engine and alternator parameters as mentioned below shall be available :- (a) Lube oil pressure. (b) Battery voltage. (c) Engine RPM. (d) Fuel level in the tank. (e) Engine running hours indication. (f) AC current and voltage. (g) AC Frequency. (h) AC Power metering. (j) Suitable CTS for displaying the electrical parameters.

Supplying, installation, testing and commissioning of silent diesel engine driven generating set 415volts, 3 phase 4 wire engine as per IS: 10001/10002 and alternator as per IS: 13364 complete with necessary foundation as per manufacturer recommendations, AVM pads , control panel with necessary meters and sound proof canopy of capacity up to 15 KVA complete all as specified and directed for the following specifications :- (A) DIESEL ENGINE. Water cooled, 2 x cylinder ( 20.5 BHP) developing suitable BHP @ 1500RPM. Engine shall be cooled by rail mounted, engine driven radiator of adequate capacity, with blower fan, fan guard, fan belts etc. The diesel engine shall be vertical, to run continuously at 1500 RPM confirming to IS 10002, BS-5514, standard with an overload capacity of 10% for one hour in every 12hrs of operation. Diesel engine shall comply with latest CPCB norms. Make of Engine-CUMMINS, KIRLOSKAR, GREAVES COTTON Ashok Leyland. (B) ALTERNATOR. Alternator 15 KVA, suitable to deliver rated output at 1500 RPM, 415V, 0.8 PF (LOG), 50HZ, 3 PH, in SPDP enclosure, self-excited & regulated electronic governor. The alternator shall conforms to IS-13364 & shall be suitable for tropical condition. Full load efficiency of the alternator offered should be above 90%, insulation and temperature rise also limited to class H. Enclosure shall conform to IP-23. Make of Alternator - KIRLOSKAR, CATTERPILLAR, STEMFORD, JYOTI, CROMPTON GREAVES, NGEF. (C) STANDARD CONTROL PANEL. Totally enclosed, steel construction control panel comprising of following :- (i) Main on /off MCB 3 phase 4 pole 415 volt 50 Hz 40 Amp taring 10 KA-01 No. (ii) Phase indicating lamps set of three-01 No. (iii) Instrument fuses -01 Set .. (iv) Digital display/indication of engine and alternator parameters as mentioned below shall be available :- (ia) Lube oil pressure. (ib) Battery voltage. (ic) Engine RPM. (id) Fuel level in the tank. (ie) Engine running hours indication. (if) AC current and voltage. (ig) AC Frequency. (ih) AC Power metering. (ij) Suitable CTS for displaying the electrical parameters. Note :- For Ser Item No-1 to 4 The PCC work for foundation shall be measured and paid under respective item.

Supply, laying, commissioning and testing XLPE insulated, armored heavy duty electric cable with aluminum conductor, 1100 volts grade, cross sectional area 70 sqmm 3.5 core complete with making connection including aluminium lugs , nuts and bolts of suitable size all as specified and directed for 82.5 KVA DG set.

Supply, laying, commissioning and testing XLPE insulated, armored heavy duty electric cable with aluminum conductor, 1100 volts grade, cross sectional area 50 sqmm 3.5 core complete with making connection including aluminium lugs , nuts and bolts of suitable size all as specified and directed for 62.5 KVA DG set.

Supply, laying, commissioning and testing XLPE insulated, armored heavy duty electric cable with aluminum conductor, 1100 volts grade, cross sectional area 25 sqmm 3.5 core complete with making connection including aluminium lugs , nuts and bolts of suitable size all as specified and directed for 40 KVA DG set.

Supply, laying, commissioning and testing XLPE insulated, armored heavy duty electric cable with aluminum conductor, 1100 volts grade, cross sectional area 16 Sqmm 4 core complete with making connection including aluminium lugs , nuts and bolts of suitable size all as specified and directed for 15 KVA DG set.

Material and labour for earthing for DG Set complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground level with top edge of the earth plate not less than 1.5 meter deep below normal ground level, connected with & including galvanized iron strip of size 32x6mm connected to main test point as directed as earthing lead upto (7.5mtr) by means of nuts, bolts and washers of galvanized iron protected by 40mm dia (light grade) GI tubing, funnel, wire mesh 20mm bore GI tubing (medium grade) watering pipe, including concrete pit in PCC (1:3:6) type C-1, precast RCC (1:2:4) type B-1 cover slab of size 350x350x50mm re-inforced with 8mm dia TMT bars @ 15cm C/C in both ways and 10mm dia MS handle (01 No) of suitable size for lifting of cover slab, charcoal and salt in alternate layers including necessary excavation and earth work in soft/loose soil all as shown in Electric plate No-3 of SSR part-I and testing on completion complete all as specified and directed.

Excavation in trenches not exceeding 1.5 meter in wide and exceeding 1.5 meter but not exceeding 1.5mtr in depth for laying of underground cable and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed.

Removing of excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.5 meter above the starting point complete all as specified and directed.

Material and labour for sand dry, filling in trenches around under ground cable complete all as specified and directed.

Supply / laying and fixing 50 mm bore galvanised steel tubes with all fittings, light grade, fixing on wall , under road for cable protection complete all as specified and directed.

Mateial and labourr for providing of new sub class 'B' bricks, old size, well burnt laid flat for protection of under ground cable complete all as specified and directed.

Supply, fixing and testing of On load change over switch with sheet steel enclosure 4 pole 415 volt 125 Amps front operated confirming to IEC 947-3, EN-60947 AC complete all as specified.

Supply, fixing and testing of On load change over switch with sheet steel enclosure 4 pole 415 volt 100 Amps front operated confirming to IEC 947-3, EN-60947 AC complete all as specified.

Supply, fixing and testing of On load change over switch with sheet steel enclosure 4 pole 415 volt 63 Amps front operated confirming to IEC 947-3, EN-60947 AC complete all as specified.

Supply, fixing and testing of On load change over switch with sheet steel enclosure 4 pole 415 volt 32 Amps front operated confirming to IEC 947-3, EN-60947 AC complete all as specified.

Material and labour for Cement concrete in foundatios, filling and mass concrete type B2 , of ratio 1:2:4 complete all as specified and directed.

M/S SURAT SINGH AND SONS

SA construction co.

national engineering

M/S MECHANICAL ENGINEERING and ELECTRICAL CONTRACTORS

Electromech Engineers

Ramesh Traders Govt Contractors & General OrderSuppliers

KUKREJA BROTHERS

Shikhar ji Enterprises

M/s Chitter Mal & Co.