NIT No:-04/PR/BSPTCL/2026-5

Boring, providing and installing bored cast-in-situreinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporarycasing of appropriate length for setting out and removal of sameand the length of the pile to be embedded in the pile cap etc. allcomplete, including removal of excavated earth with all lifts andleads (Length of pile for payment shall be measured upto bottomof pile cap).300mm dia

Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete.

Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l,

Centring and shuttering including strutting,propping etc. and removal of form for.

(a)Lintels, beams, plinth bams, griders, bressumers and contilevers.

(b)Columns,Pillars, Piers, Abutments, Posts and Struts

Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand )

Extra for Brick work in superstructure above plinth level upto floor V

12 mm cement plaster 1:6( 1 cement: 6coarse sand)

Applying one coat of cement primer of approved brand and manufacture on wall surface: Cement primer

Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade New work (three or more coats)

Extra for marking of structural steel work required to be reerected.

(a) Thermo-Mechanically Treated bars TMTC-500-12mm dia.

(B) Thermo-Mechanically Treated bars TMTC-500-10mm dia.

( C ) Thermo-Mechanically Treated bars TMTC-500-8mm dia.

Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 meters lead: In cement mortar

Recovery of bricks

Removing mortar form bricks and cleaning bricks including stacking within a lead of 50m (stacks of cleaned bricks shall be measured): From brick work in cement mortar

Demolishing cement concrete including disposal of material within 50 metre lead: 1:3:6 or richer mix

Supplying and fixing MS angle of size 50x50x6mm as per direction and specification of E/I

Drilling 6mm Dia. In M.S. angle iron for fixing of staples etc. as per building specification and direction of E/l.

Labour for cutting of M.S. angle iron post to required length, one end splitted as fish tailed in a length of 150mm complete as per building specification and direction of E/l.

Labour for fitting and fixing barbed wire fencing in six rows horizontal up to a height of 1.85m and two diagonals including fixing of post in cement concrete at 2.5m centres including cost of staples (but excluding the cost of cement concrete, angle, iron post, its cutting and making holes, nuts & bolts) all complete as per building specification and direction of E/l.

Supplying and fixing barbed wire all complete as per direction of E/I

Applying priming coat: With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel works

Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats)

Neat cement punning

Excavating, supplying and filling of local earth (including royalty but excluding cairriage cost) by mechanical transport upto a lead of 3km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. If local earth is available at more than 3 km lead the actual lead must be approved by compitent authority. cairraiage of material will be paid seperately and calculated after deducting initial lead

Earth work in excavation of foundation of structures as perdrawing and technical specification, including setting out,construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom,backfilling the excavation earth to the extent required a ndutilising the remaining earth locally for road work..

Construction of Embankment with approved material obtained from Borrow pits with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirementof Table 300-2.

Providing and laying Filter material underneath pitching in slopes complete as per drawing andTechnical specification

Providing and laying pitching on slopes Laid over prepared filter media including boulderapron laid dry in front of toe as per drawing andtechnical specifications..

Clearing and grubbing road land including uprooting rankvegetation, grass, bushes, shrubs, sapling and tress girthupto 300 mm, removal of stumps of tree cut earlier and disposal of unserviceable materials and stacking ofserviceable material to be used of auctioned, up to a lead of1000 metresincluding removal and disposal of top organicsoil not exceeding 150mm in thickness.

Extra cost for cement (per bag)

Bricks

Total Cost Incl 18% GST(A)

Seignoirage Fee

Total Seignoirage Cost

10% Cost of seigniorage fee of material cost (B)

Total A+B

Bill of Quantity

Tender Notice No.

Estimated Cost

Boring, providing and installing bored cast-in-situreinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporarycasing of appropriate length for setting out and removal of sameand the length of the pile to be embedded in the pile cap etc. allcomplete, including removal of excavated earth with all lifts andleads (Length of pile for payment shall be measured upto bottomof pile cap).300mm dia

Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete.

Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l,

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement. 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size)

Centring and shuttering including strutting,propping etc. and removal of form for.

Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand )

Extra for Brick work in superstructure above plinth level upto floor V

12 mm cement plaster 1:6( 1 cement: 6coarse sand)

Applying one coat of cement primer of approved brand and manufacture on wall surface: Cement primer

Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade New work (three or more coats)

Extra for marking of structural steel work required to be reerected.

Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 meters lead: In cement mortar

Recovery of bricks

Removing mortar form bricks and cleaning bricks including stacking within a lead of 50m (stacks of cleaned bricks shall be measured): From brick work in cement mortar

Demolishing cement concrete including disposal of material within 50 metre lead: 1:3:6 or richer mix

Supplying and fixing MS angle of size 50x50x6mm as per direction and specification of E/I

Drilling 6mm Dia. In M.S. angle iron for fixing of staples etc. as per building specification and direction of E/l.

Labour for cutting of M.S. angle iron post to required length, one end splitted as fish tailed in a length of 150mm complete as per building specification and direction of E/l.

Labour for fitting and fixing barbed wire fencing in six rows horizontal up to a height of 1.85m and two diagonals including fixing of post in cement concrete at 2.5m centres including cost of staples (but excluding the cost of cement concrete, angle, iron post, its cutting and making holes, nuts & bolts) all complete as per building specification and direction of E/l.

Supplying and fixing barbed wire all complete as per direction of E/I

Applying priming coat: With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel works

Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats)

Neat cement punning

Excavating, supplying and filling of local earth (including royalty but excluding cairriage cost) by mechanical transport upto a lead of 3km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. If local earth is available at more than 3 km lead the actual lead must be approved by compitent authority. cairraiage of material will be paid seperately and calculated after deducting initial lead

Earth work in excavation of foundation of structures as perdrawing and technical specification, including setting out,construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom,backfilling the excavation earth to the extent required a ndutilising the remaining earth locally for road work..

Construction of Embankment with approved material obtained from Borrow pits with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirementof Table 300-2.

Providing and laying Filter material underneath pitching in slopes complete as per drawing andTechnical specification

Providing and laying pitching on slopes Laid over prepared filter media including boulderapron laid dry in front of toe as per drawing andtechnical specifications..

Clearing and grubbing road land including uprooting rankvegetation, grass, bushes, shrubs, sapling and tress girthupto 300 mm, removal of stumps of tree cut earlier and disposal of unserviceable materials and stacking ofserviceable material to be used of auctioned, up to a lead of1000 metresincluding removal and disposal of top organicsoil not exceeding 150mm in thickness.

Carriage of Materials

Extra cost of materials

Rate are inclusive of GST @ 18% for the above items

Seigniorage Fee

Note :The rate for seigniorage fee calculation shall be firm and shall not be affacted by the percentage rate (Below/ Above) quoted for BOQ.