Miscellaneous works related to Civil and PH at New BARC Hospital Building, Anushaktinagar, Mumbai

Amount

Dismantling plain cement concrete manually / by mechanical means carefully without damaging adjacent structures including disposal of debris within 200 m lead as per direction of Engineer-in-charge

Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge

Dismantling of RCC works carefully manually without damaging adjacent structures excluding cutting of reinforcement including stacking of steel reinforcement bars and disposal of unserviceable materials within 200 m lead as per direction of Engineer-in-charge.

Dismantling brick bat coba cement based water proofing over roof and chajjas carefully without damaging adjacent structures including lowering and stacking of materials and dispoal of unserviceable materials within 200 m lead as per direction of Engineer-in-charge

Dismantling old plaster / skirting carefully, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100 m lead

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m lead. For thickness of tiles above 10 mm and up to 25 mm

DISMANTLING TILE WORK IN FLOORS AND ROOFS laid in cement mortar including stacking material within 100m lead for thickness of tiles above 25mm and up to 40mm.

DISMANTLING DOORS, WINDOWS AND CLEAR STOREY OPENINGS (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100m lead (full windows) of area 3.00 Sq.M and below.

DISMANTLING DOORS, WINDOWS AND CLEAR STOREY OPENINGS (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100m lead (full windows) of area beyond 3.00 Sq.M.

DISMANTLING cement asbestos, Celotax or other hard board ceiling or partiton walls ALUMINIUM / GYPSUM PARTITIONS, DOORS, WINDOWS, fixed glazing and false ceiling including disposal of unserviceable surplaus material and stacking of serviceable materials within 100 m lead as directed by the Engineer-in-charge.

Lead charges for Lead of debris beyond 4 KM but upto & including 30 KM outside BARC / Anushaktinagar colony area by mechanical transport including loading, unloading, stacking / levelling etc. Note: The rates in respect of this item are applicable for NET Quantities arrived at after making deduction for voids @ 30% in respect of debris from corresponding STACK/TRUCK Measurement.

Providing and laying in position CEMENT CONCRETE OF 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20mm) including consolidation, finishing, curing etc. complete as per specification and drawings but excluding the cost of Formwork shuttering, centering and steel reinforcement at all Levels.

Providing and laying in position REINFORCED CEMENT CONCRETE (RCC) OF GRADE M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or superplasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc.complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level and as directed by the Engineer-in-charge.

Extra over for RCC Using Ready Mix Concrete from outside project area including transporting and pumping from approved batching plants .

Providing, centering, shuttering FORM WORK USING PVC FILM FACED PLYWOOD to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings and specifications for super structure and as directed by the Engineer-in-charge.

Providing and fixing in position 25 mm thick Joint filler board of approved make in expansion joints to the required size and shape, placing and keeping in position complete as per specifications and drawings and as directed by the Engineer in charge.

Providing REINFORCEMENT FOR REINFORCED CEMENT CONCRETE at all levels including supplying, preparation of bar bending schedules,cutting, bending, transporting, fixing, tieing in position with 1.6 mm dia soft drawn annealed binding wire all labour charges, cost of cover blocks in specified grade of concrete etc. complete including cost of binding wire as per specifications and drawings. Steel Supplied by the Contractor. Using TMT bars of specified grade all dia bars to be supplied by the contractor confirming to IS:1786 only.

Providing SFMC Micro concrete for strengthening of structural members including mixing, pouring, curing as per manufacturer specifications and as directed by the Engineer-in-charge. Using 100% SFMC

Providing Structural steel work in M.S Plain Plates and chequrred Plates for Embedded Parts, Trench Covers, Connection plates etc.including cutting, hoisting, fixing in position and applying a priming coat of approved zinc chromate steel primer etc.including cost of structural steel Plates, welding all labour charges etc. complete as per drawings and specifications. Using materials of confirming to IS:2062 only. All test reports to be provided along with the supply of the materials. 'Notes : '(1) Welding weights, connections, bolts and nuts, anchor bolts shall not be measured for payment, but the cost of which shall be deemed to have been included in the rate. '(2) All holes will be made by drilling only. Gas cutting of holes will not be permitted. (3) Edges of plates shall be grinded to uniform smooth finish. '(4) Full length welding shall be carried out as directed by the EIC. Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. ADOR, ESAB, Indian Oxygen and D&H SECHERON or equivalent make - Welding Electrodes.

Providing STRUCTURAL STEEL WORK USING ANGLES, CHANNELS, JOISTS AND OTHER SECTIONS, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Project Engineer. Up to and including 300mm Joists, 350mm channels, and below sections Using materials of confirming to IS:2062 only. All test reports to be provided along with the supply of the materials. 'Notes : '(1) Welding weights, connections, bolts and nuts, anchor bolts shall not be measured for payment, but the cost of which shall be deemed to have been included in the rate. '(2) All holes will be made by drilling only. Gas cutting of holes will not be permitted. (3) Edges of plates shall be grinded to uniform smooth finish. '(4) Full length welding shall be carried out as directed by the EIC. Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. ADOR, ESAB, Indian Oxygen and D&H SECHERON or equivalent make - Welding Electrodes.

Providing and fixing 304 GRADE STAINLESS STEEL WORK for Open drain/ Drain grating / Nhani trap/Jali/hand rail in pipe section, Angle, Plate etc. Sections of approved size and make and quality by welding, mirror / matt polishing , fixing at site etc. for kitchen floor drain/balcony railing & staircases railing and misc. items including special sections as per drawings, specifications. complete. 'Notes : '(1) Welding weights, connections, bolts and nuts, anchor bolts shall not be measured for payment, but the cost of which shall be deemed to have been included in the rate. '(2) All holes will be made by drilling only. Gas cutting of holes will not be permitted. (3) Edges of plates shall be grinded to uniform smooth finish. '(4) Full length welding shall be carried out as directed by the EIC. Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. ADOR, ESAB, Indian Oxygen and D&H SECHERON or equivalent make - Welding Electrodes.

Providing and fixing Anchor fastener HST stud type including drilling in concrete as per requirement for fixing Eps or other structures all as specified by the manufacturer complete all as per specifications and drawings and as directed by EIC. M-12X115 mm long Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. HILTI (HST stud type) or approved equivalent make

Providing and constructing Brickwork in cement mortar 1:4 using crushed sand with Flyash/ Flyash Lime bricks with minimum 70 kg/ sq.cm strength of approved make and size in super structure up to and including Floor II Level including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings.

Providing and laying AUTOCLAVED AERATED CEMENT BLOCK MASONRY of approved make with specified thick AAC Blocks in Super structure above plinth level up to 20m height in cement mortar 1:4 (using crushed sand). The rate shall also include providing and placing in position 2 Nos of 8mm dia bars at every third course of the masonry work.

Providing and fixing DOUBLE TUBULAR SCAFFOLDING SYSTEM using H- frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding

Providing and fixing G.I. chicken mesh in the junctions of concrete & brick work / masonry or as directed by the Engineer in charge including cutting, fixing with nails in position before plastering complete all as directed by the Engineer-in-charge. (only area of the chicken mesh used alone will be measured)

Providing 15 mm thick plastering using Ready mix internal plastering compound of approved make for internal faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in-charge

Providing 20 mm thick plastering using Ready mix external plastering compound of approved make for external faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning scaffolding up to 10 metres height complete.all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge

Providing 20 mm thick water proof plastering in cement mortar 1:3 (using crushed sand) finsihed smooth with a floating coat of neat cement including approved water proofing compound added @ 2% by weight of cement or as per manufacturer's specifications, sieving of sand to required fineness, preparation of surface, scaffolding at all heights, curing all as per specifications, drawings and as directed at site.

Extra over for cement punning for all types of mixes complete all as per specifications and as directed

Providing cement based waterproofing treatment to new terraces / chajjas including cleaning the concrete surfaces, giving injections to the top slab as required with cement & approved waterproofing compound solution to fill up all inherent holes, voids honey-combs etc. in the concrete slab, setting "autoclaved aerated light weight block bats" coba in waterproof mortar 1:4 (using crushed sand) with necessary gradient for easy flow of water, complete as per specifications and as directed by the Engineer-in-charge.

Providing and fixing 1st quality CERAMIC GLAZED FLOOR TILES of minimum 300 - 600 mm long and 300 - 600 mm wide and thickness not less than 6 mm conforming to IS 15622 of approved make in all colours and shades as approved by Engineer-in-charge over a bed of 20 mm thick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Enginner-in-charge.

Providing and fixing 1st quality CERAMIC GLAZED WALL TILES conforming to IS 15622 of approved make. shade and colour of size ranging from 300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.

Providing and fixing GLAZED VITRIFIED FLOOR TILES of size 600 X 600 mm in floor and dado of approved make in different sizes conforming to IS 15622 in all colours and shades in Glossy or Matt or satin finish laid over a bed of minimum 20 mm thick bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints with white cement based Tile Grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge

Add over Extra for polymer mortar in place of cement mortar

CUDDAPAH STONE SLAB OVER KITCHEN PLATFORM etc. using 25 mm to 30 mm thick machine cut double machine polished slabs in single piece upto a maximum length of 1.80 metres laid over 20 mm thick cement mortar bedding 1:4 finished to proper levels, cured etc. complete.

Providing and fixing Minimum 15 to 17 mm thick gang saw cut mirror polished (Premoulded and Prepolished) machine cut GRANITE OF TELEPHONE BLACK COLOUR FOR KITCHEN PLATFORMS, vanitiy counters, Wash basin Counters, Door Frames, window sills, facias and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete as directed by the Engineer-in-charge at all levels.

Extra over for providing EDGE MOULDING upto 17mm THICK GRANITE SLAB counters, Vanitis etc. including machine polishing to edge to give high gloss finish et. Complete as per design approved by Engineer-in-charge. Granite work

Providing and Fixing HOMOGENEOUS 2.00mm THICK PVC SHEET / TILE IN FLOORING AND SKIRTING of approved make in approved pattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer including, levelling small undulations with plasterof paris if required , rolling with light wooden roller weighing about 5 kg all complete as directed by Engineer-in-charge in approved colour and shade

Providing and laying FLOORING PLASTER OF PARIS 8mm THICK OVER NEW LAID TILES including spreading polythene paper, curing, levelling,removal and disposal of same before cleaning floor, labour, tools etc. complete and as directed by Engineer in charge.

Providing and laying Self levelling Epoxy flooring , including preparation of the surface, primer coat,screeding & levelling coat and finishing coat with Polyurethene coat of approved colour and shade of approved make all as per manufacturers specifications complete as directed at site by the Engineer-in-charge (This Job to be carried out through a specialized approved agency) - 3 mm thickness

Extra over charges for providing 75mm x 75mm COVING AT CORNERS as directed by Engineer in Charge.

Providing and Painting with Epoxy paint at all locations prepared and applied as per manufacturer' specifications including a priming coat if specified by the manufacturer , preparation of surface and etching with 10% commercial Hydrochloric acid wherever necessary and neutralizing the acid etched areas by washing with 5% solution of soda ash neatly and washing with sufficiant water, after first coat Epoxy based trowelling compound if required, including preparation of the surface by scrapping, applying sand paper, filling the holes, joints, cracks if any, etc. complete.all as per manufacturers Technical Data and as directed at site to acheive 200 micron dry film thickness (50 micron primer coat and 150 micron finishing coat).

Providing wood work in frames of doors, windows, clear story openings and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing,making rebates for shutters, making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40 mm X 3 mm thick, 200 mm long / with coach screws including protective painting to the suface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-charge- 2nd class Teakwood

Providing and fixing cement bonded particle board with washer, flange type screws etc. for claddings / flooring over existing frame work, as per manufacturers specification and directed of Engineer-in-charge. For 12mm thick cement board for partition & false ceiling. Note :- Aluminium required for framework & joint covering will be measured separatly and paid under relavant Item of this schedule. Only actual covered area of the cement bonded particle board will be measured and paid under this item. Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. Bison or approved equivalent make

Extra over for flush door shutters making rebate for double leaf shutters of all sizes, thickness and finishes complete as per the drawings

Providing LOUVERED OPENING IN DOOR SHUTTERS including making the opening, providing & fixing teak wood louver blades with necessary teak wood frame work & beading & applying one coat of approved wood primer etc. complete.

Providing and fixing 25 mm thick Colour PVC Integral foam Sheet door shutters flush door of approved colour, of approved make or equivalent, design, colour and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges, Fixing of Stoppers, tower bolts, baby latch, aldrop, handles etc.wherever required with S.S. screws (Stopper, Tower bolt, Baby latch, Aldrop, Handels etc Shall be supplied by department) etc. complete as per specifications and as directed by Engineer-in-charge. Note : The door should satisy the following technical parameters as under: 1. Density : 0.475 to 0.55 g/cc, 2. Hardness (Shore 'D'): min. 55, 3. Water absorption : max. 1 %, 4. Tensile strength : min. 13 MPa, 5. Elongation : min. 15 %, 6. Flextural Strength min. 30 MPa, 7. Compressive Strength at 10% Deformation : min. 3 MPa, 8. Vicat Softening Temperature: more than 75 Deg Celcius 9. Flammability: classification B : S3 : D0 (to be tested as per NF EN 13501-1 standard)

Providing and Supplying PVC Louvers suitable for fixing in Solid PVC Integral Sheet Doors of white colour of approved brand as directed by Engineer-in-Charge.

Providing and fixing Heavy Quality MECHANICALLY OPERATED GUIDED CHANNEL WITH FITTINGS COMPLETE FOR SLIDING DOOR including roller wheel, stoper, guiding-pin etc complete of approved make as per specifications and as directed by the Engineer-in-charge.

Providing & only supplying of DOOR CLOSER for flush door shutter of Capacity 60-⁠80 Kg as per specifications and as directed by the Engineer-in-charge. Note: Tentative / suggested make for guidance of the bidder(s): M/⁠s TECMA Door closer FT1070 (Capacity 60-⁠80 Kg.) or any other equivalent for door closer.

Providing and fixing ALUMINIUM HANDLES 175mm LONG INNER GRIP 125mm WITH 12mm DIA ROD PLATE TYPE BOW HANDLES ISI marked of approved make, anodised transparent or dyed to req. colour or shade with necessary screws etc. complete.

Providing and fixing ALUMINIUM TOWER BOLTS OF SIZE 250mm X 12mm of approved make with necessary screws etc.all as per specifications and as per drawings.

Providing and fixing STAINLESS STEEL ALDROPS OF SIZE 300mm X 14mm of approved make with necessary screws, bolting from rear side complete as per specifications complete.

Providing and fixing 4 LEVER MORTICE LOCK of approved make suitable for aluminium sections.

Providing and fixing 6 LEVERS MORTICE LATCH AND LOCK of approved make and a pair of handles Inside opening Left / Right with necessary screws etc complete suitable for fixing in wooden / steel/ FRP/ doors as per specifications.

Providing and fixing ANODISED ALUMINIUM BABY LATCH of size 75 X 12 mm ISI marked of approved make transparent or dyed to requried colour or shade with necessary screws etc.

Supplying of ALUMINIUM HANGING HEAVY QUALITY FLOOR DOOR STOPPER ISI marked with all accessories complete.

Providing and fixing IS:1341 marked OXIDIZED M.S. HEAVY WEIGHT BUTT HINGES / PARLIAMENTARY HINGES of size 125 x 90 x 3.15 mm with necessary screws etc. complete.

Supplying, providing and fixing STAINLESS STEEL-304 D-HANDLES (MATT FINISH) OF LENGTH - 300mm, DIAMETER-25mm, suitable S.S. fange , S.S. cap and thickness 16 Guage thickness to brick Walls, R.C.C. surface, Wooden doors etc. including drilling, S.S. Screws of 30mm long (6 Nos. for each handle) ncluding cost of labour, tools, tackles, wooden gutties, plants, transportaion, scaffolding etc. all complete as per site requirement and as directed by Engineer in charge.

Providing, supplying and fixing VENETIAN VERTICAL BLINDS / rolling type with all accessories and fabricating to required sizes etc as per approved design and approved Fabric complete all as directed by the Project Engineer.

Providing and fixing 25 mm S.S. CURTAIN RODS of 1.25mm thick with two SS / Brass brackets fixed with SS / Brass screws and wooden plugs etc.wherever necessary complete.

Providing, supplying and fixing HOLLOW METAL FLUSH STEEL DOORS 40mm thick of approved make consisting of door frame and shutters and all hardware fittings, frame made out of 14g thick G.I sheets and shutters made of 16g thick sheets, hollow portion filled with puff, including necessary stiffners in shutters and frame, vision panel of specified size with 4 mm glass and clip on pressed steel frame for vision panels, fixing 4 nos heavy duty stainless steel 304 grade ball bearing hinges, mortise / dead lock of approved make, a pair of 200 mm long stainless steel handles, 250 mm long stailless steel tower bolt, etc. frame hollow portion filled with PCC 1:2:4, necessary hold fast embedded in concrete, fixing in concrete with anchor fastners. finished with Polyurethane painting of approved colour complete all as per drawings and specifications and as directed by the Engineer-in-charge. Note: Tentative / suggested make for guidance of the bidder(s): M/s SHAKTI-Hormann make or approved equivalent make

Providing, supplying & fixing of S.S. MESH-(MOSQUITO NET) - 0.50MM THICK - LESS THAN 1.0 SQ. MM APERTURE in aluminium grill / frame including cost of all accessories and fabricating to required sizes etc complete all as directed by the Engineer-in-Charge. Note : Alumunium Grill will be paid separately.

ALUMINIUM WORK FOR DOORS, WINDOWS, VENTILATORS & PARTITION with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (Note : Fittings, glazing and panelling shall be paid for separately) Notes : Notes : 1) The rates for aluminium is inclusive of all fastners required for fabrication and fixing in the walls. 2) All joints shall be of mittered Joints. 3) A long M.S. rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts. 4) Only Aluminium members alone shall be measured and paid for.

Providing and fixing Aluminium sections (Minimum anodizing thickness of 15 micron)

Extra for COLOUR ANODIZING / DYED ANODIZING

Providing and fixing in position PVC integral excel sheet of 8mm thick white/offwhite in colours including cutting, placing, fixing, anchoring, tools, labours etc. completed all as per the drawings , manufacturer's specification and as directed at site by the Engineer-in-charge. Note : Tentative / suggested make for guidance of the bidder(s): M/s Jain Irrigations System Ltd. or equivalent approved make

Providing and fixing GLAZING IN ALUMINIUM DOORS, WINDOW, VENTILATOR shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-Charge (Cost of snap beading shall be paid in basic item)

With Frosted Glass panes of 5.00 mm thickness

With Clear Float Glass panes of 5.00 mm thickness

With Tinted Colour Glass panes of 5.00 mm thickness

With clear float glass panes of 8.00 mm thickness

Supplying of STAIN LESS STEEL BODY ROLLER WHEELS of approved make for Sliding shutters as approved by Engineer-in-Charge.

Supplying of Locks cum Handle for Sliding shutters as approved by Engineer-in-Charge. Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. Star or approved equivalent make

Providing and fixing DOUBLE ACTION HYDRAULIC FLOOR SPRING of approved brand and manufacturer (conforming to relevant Indian Standard) for doors including cost of cutting floors as required, embedding in floors and cover plates with M.S pivot and single piece of M.S sheet outer box with slide plate etc. complete as per directions of Engineer-in-charge with brass cover plate

Providng and fixing Aluminium Grill 10mm Thick in natural Silver anodising of min. 15 Microns with a opening size of 60mm x 45mm and Minimum weight of 4.12 Kg/ Sq.M including providing and fixing Suitable 'F' / 'H' section outer frame and mullion fixing with screws complete all as per specifications and as directed at site by the Engineer-in-charge. Aluminium alloy shall be of 6063-T6 with yield strength of minimum 6.5 kg/ sq.mm. Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. Deco Grille or approved equivalent make

Extra over for providing ALUMINIUM GRILL 10mm THICK WITH COLOUR ANODISED by the manufacturer (Champagne, black, Bronze, Gold colours) complete all as per specifications and as directed at site by the Engineer-in-charge.

FILLING THE GAP WITH SILICON SEALANT between aluminium frame & adjacent RCC / Brick work / Stone work over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Up to 5 mm depth and 5 mm width.

Providing and fixing in position SUSPENDED FALSE CEILING SYSTEM / PARTITION SYSTEM USING CALCIUM SILICATE BOARDS having 100% humidity resistance, incombustible as per BS476 part IV with thermal conductivity of 0.043 w/m KC placed in a suspended grid of size of 600x 600mm made of hot-dipped G.I steel sections wherein the ceiling sections of 0.55 mm thick shall be suspended at 1200 mm centres along the length of ceiling with 4mm dia G.I wires/ 1 mm thick strip hangers made of G.I sheet sections with necessary level adjusters and inter channels of 0.90mm thick with connecting clips and resting on the perifery walls on wall angles of 0.55 mm thickness including providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings and as per directions of Engineer-in-charge The main tees to be suspended from the ceiling/ soffit with the help of metal dash fastners of 6mmx50mm, soffit clits of 25mmx35mmx1.60mm and 4mm dia G.I wire with galvanised spring steel levelling clips/ G.I strip Hangers at 600mm centers . the entire grid system shall be designed to bear a distributed load of minimum 25 kg/Sq.m (Only calcium silicate false ceiling area will be measured for the purpose of payment) Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. Hilux or approved equivalent make

8mm THICK CALCIUM SILICATE BOARDS

12mm THICK CALCIUM SILICATE BOARDS

Providing and Fixing in position Suspended false ceiling system using 600 x 600mm Calcium Silicate Ceiling tiles. Tiles having 15mm densified edges and 100% humidity resistance, incombustible as per BS476 part IV with thermal conductivity of 0.043 w/m KC and approvred surface design and edge profile placed in a suspended grid of size of 600 x 600mm made of hot-dipped G.I steel sections having an exposed surface capping of pre-finished baked polyester painted coil wherein the main tee of size 24mm x 38mm x 0.33mm shall be suspended at 1200 mm centres along the length of ceiling with 4mm dia G.I wire with necessary level adjusters and cross tees of size 24 x 28 x 0.33mm x 1200 mm shall be inserted in to slots between the main tees at 600mm centres and thereafter in direction vertical to the longer tees, cross tees of size 24 x 28 x 0.33mm x 600mm shall be inserted to form a grid size of 600 x 600 mm resting on the perifery walls on wall angles of size 20mm x 20mm x 3000 mm x 0.40 mm thickness. 'The rate shall include providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings. The work shall be carried out as per directions of Engineer-in-charge. The main tees to be suspended from the ceiling/ soffit with the help of matal dash fastners of 6mmx50mm, soffit clits of 25mmx35xxx1.60mm and 4mm dia G.I wire with galvanised spring steel levelling clips. the entire grid system shall be designed to bear a distributed load of minimum 15 kg/Sq.m (Only calcium silicate false ceiling area will be measured for the purpose of payment) .Note: Tentative / suggested make for guidance of the bidder(s): of M/s Aerolite Tile model or approved equivalent for false ceiling tile material. Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. Aerolite or approved equivalent make

Supply of manpower for carrying out shifting and re-arragement works of furnitures, equipmets, instruments etc. with necessary safety precautions, tools etc. and also seasonable departmental work alloted by the Engineer-in-charge . Notes :- Personal protective equipmets for labours shall be arranged by contractor at his own cost. By using Un-Skilled Manpower. Deployment: The contractor shall deploy un-skilled worker for each job for 8 ½ hours per day with 30 minutes of break, in General (Ist / IInd) or on Round the clock shift whenever necessary as per the discretion of the Engineer-in-Charge during the contract period.

Providing and fixing LIQUID SOAP DISPENSER in all respect as per specifications and as directed by the Engineer-in-charge. Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. Euronics (ES-05 Model) or approved equivalent make

Providing and fixing 15mm C.P. BRASS SWAN NECK PILLAR COCK of heavy Quality of approved make and specied type as per specifications and as directed by the Engineer-in-charge. Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. Jaquar or approved equivalent make

Providing and fixing Heavy Quality 15mm C.P. BRASS PILLAR COCK ELBOW OPERATED of approved make as per specifications and as directed by the Engineer-in-charge.

Providing, Supplying & Fixing of FOOT OPERATED PILLAR TAP OR VALVE with Brass Spout including a pair of 3 feet PVC connections and cost of all accessories etc. complete as directed by the Engineer-in-Charge.

Providing and fixing Heavy Quality 15mm C.P. BRASS 3 WAY MULTI-OUTLET LABORATORY PILLAR COCK as per specifications and as directed by the Engineer-in-charge.

Providing and fixing white VITREOUS CHINA LABORATORY SINK of size about 530 x 430 x 180 mm with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass trap with C.P. brass unions complete including painting the fittings and brackets with 3 coats of white enamel paint over a coat of primer, cutting and making good the walls wherever required complete as per specifications and as directed by the Engineer-in-Charge.

Providing and fixing VITERIOUS CHINA WASH BASIN of approved make and colour with C.I. brackets, 15mm C.P. brass pillar tap of approved make,15 mm x 600mm long PVC Inlet connection, 32 mm heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge. White vitreous China wash basin size about 630 x450 mm and equivalent sizes with single 15mm C.P. brass pillar tap

Providing and fixing satin finish STAINLESS STEEL AISI 304 (18/8) KITCHEN SINK of size about 610 x 510 mm without drain board and bowl size 685 x 535 x 250 mm depth as per IS13983 of approved make, with C.I. brackets, fittings and stainless steel plug 40 mm including painting the fittings and brackets with 3 coats of white enamel paint over a coat of primer, cutting and making good the walls wherever requried complete as per specifications and as directed by the Engineer-in-charge.

Providing & only supplying of WALL MOUNTED EWC in WHITE colour with seat cover of approved make as approved by Engineer-in-Charge.

Providing and fixing 6mm THICK MIRRORS with bevelled edges complete with 6 mm thick asbestos / FRP sheet back ground fixed to walls with C.P. brass screws and concealed washers complete. all as per specifications and as directed by the Engineer-in-charge.

Extra for providing and fixing approved make STAINLESS STEEL 304 GRADE STUDS (with wall spacers) for mirrors etc. complete all as per specifications and as directed by the Enginner-in-charge

Making connection of distribution branch with G.I main of 25 to 40 mm nominal bore by providing and fixing tee including cutting and threading the pipes etc. complete as per specifications and as directed by the Engineer-in-charge

Making connection of distribution branch with G.I main of 50 to 80 mm nominal bore by providing and fixing tee including cutting and threading the pipes etc. complete as per specifications and as directed by the Engineer-in-charge

Providing, laying , jointing, fixing and testing heavy quality (ISI Marked C-Class) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing teflon tape, chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint, all as directed by the Engineer-in-charge. Pipes with ISI marked 'C' -Class heavy quality pipes of approved make. Note : Tentative / suggested make for guidance of the bidder(s): M/s TATA make or approved equivalent make for G I Pipe material.

15 mm n.b. G.I pipe

20 mm n.b. G.I pipe

25 mm n.b. G.I pipe

32 mm n.b. G.I pipe

40 mm n.b. G.I pipe

50 mm n.b. G.I pipe

Providing and fixing CHLORINATED PVC (CPVC) PIPES having thermal stability for hot & cold water supply (as ASTM Standard 2846 & SDR - 11 Grade) including all CPVC Plain & Brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with CPVC Solvent cement & testing the joints complete all as per specifications, drawings and as directed by the Engineer-in-Charge..

15 mm outer dia CPVC pipe (External) / open

20 mm outer dia CPVC pipe (External) / open

25 mm outer dia CPVC pipe (External) / open

32 mm outer dia CPVC pipe (External) / open

40 mm outer dia CPVC pipe (External) / open

50 mm outer dia CPVC pipe (External) / open

Providing & fixing in position heavy pattern screw down GUN METAL GATE VALVE with handles and wheels of approved make including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-Charge.

Providing, supplying, fixing in position, under floors or in walls centrifugally cast iron pipes including required specials like bends, tees, 'Y' collars, cowl etc for soil, waste and ventilation pipes conforming to IS.3989 or Cast Iron hubless pipes confirming to IS 15905 of approved make including cost of jointing with spun yarn and molten lead of specified quantity, caulking the joints, including testing of pipes, painting with primer, fixing at walls with necessary approved type of clamps and brackets complete all as per drawings and specifications and as directed at site.

75 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 using 0.90 kg lead / joint or Cast Iron hubless pipes confirming to IS 15905

100 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 using 1.00 kg lead / joint or Cast Iron hubless pipes confirming to IS 15905

Providing and Painting two coats of SYNTHETIC ENAMEL PAINT on steel surfaces of approved brand and manufacture to give an even shade with primer coat including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge.

Providing, applying wall painting two coats on old work with premium PLASTIC EMULSION PAINT of approved brand to give an even shade with a coat of cement primer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing and painting walls with (TWO coats) of approved shade of high build protective , elastomeric water proof exterior grade paint of approved make of required shade, minimium dry film thickness of 250 microns acheived in two or more coats / as per manudacturer's specifications including preparation of the surfaces by scrapping / wire brush , scaffolding complete. Primer coat will be with approved make with water in ratio of 1:2 and 2 coats of finishing coat without water all as directed by Engineer-in-charge.

CLEANING THOROUGHLY THE EXISTING SERVICE SHAFTS (ALL FLOORS IN VERTICAL) / BEHIND RCC JALI / GENTS & LADIES TOILET at all floors including cleaning throughly the existing cast iron soil and rain water pipes of all wastes, removing rags, loose material, cob webs, cloth pieces , broken concrete pieces and all deleterios materials including lift and lead charges, cost of all tools, tackles, plants, accessories etc. all complete and as directed by Engineer in charge.

CLEANING OF SEWAGE PIPE LINE: Cleaning and removal of sewage or drainage wastes, muck etc. from horizontal, sloping RCC/CI/PVC lines of all dia. (burried undergroung/under roads/exposed) connecting to sewage inspection chambers, manhole chamber etc. by mechanically / manually as desired by EIC including cost of labour, tools, machines, transportation etc.

Providing and fixing 304 GRADE STAINLESS STEEL ROOM NO PLATE of size 100mm x 40mm of matt polishing, grooving the Room No. and Border on Plate as approved by Engineer-in-Charge and fixing with SS Screw at site etc.

Core cutting in masonry / RCC works

Core cutting in RCC up to and including 50 mm Dia

Core cutting in RCC beyond 100 mm up to and including 150 mm Dia

Providing, hoisting and installing at required elevation moulded HDPE cylindrical vertical water storage tanks of approved make of the following capacities with suitable S. M. C cover at top including the cost of labour for making hole in the storage tank for inlet, outlet, scour and overflow, providing and fixing necessary G.I Nipples ranging from 15 mm to 50 nn n.b of average150 mm length with double check nuts, washers etc. complete as directed by the Engineer-in-charge

HDPE CYLINDRICAL vertical storage water tank 2000 lit capacity

R K Construction

Meena Enterprises