Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.4 CrAccepted-Finance | ₹1.4 Cr | 1 | Accepted-Finance Accept |
| 2 | 2₹1.4 Cr+₹3.4 L (2.52%)Accepted-Finance | ₹1.4 Cr+₹3.4 L (2.52%) | 2 | Accepted-Finance Accept |
| 3 | 3₹1.4 Cr+₹7.0 L (5.12%)Accepted-Finance | ₹1.4 Cr+₹7.0 L (5.12%) | 3 | Accepted-Finance Accept |
| Sl No | Description | Qty | Unit | M/S Acura Ventures L2 | PAMESHOR ENTERPRISES L1 | M/S KIM & SONS CONSTRUCTIONS & EQUIPMENTS L3 |
|---|---|---|---|---|---|---|
| 1.00DISMANTLING & DEMOLISHING WORK | ||||||
| 2.00 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : | - | - | - | - | - |
| 3.00 | Of area 3 sq. metres and below. | 36 | Each | 252.94 ₹9,105.8 | 246 ₹8,856 Lowest | 259.36 ₹9,336.78 |
| 4.00 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | 6,740.6 | Sqm | 37.25 ₹2,51,080.61 | 37 ₹2,49,402.2 Lowest | 38.19 ₹2,57,443.74 |
| 5.00 | 12 mm cement plaster of mix 1:4 (1 cement:4 coarse sand). | 6,740.6 | Sqm | 311.43 ₹20,99,198.1 | 305 ₹20,55,883 Lowest | 319.33 ₹21,52,442.1 |
| 6.00 | WOOD WORKS | - | - | - | - | - |
| 7.00 | Providing wood work in frames of doors, windows, clerestory windows and other frames.wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately | - | - | - | - | - |
| 8.00 | Local best quality Teak wood | 2.32 | Cum | 1,06,153.15 ₹2,46,275.31 | 1,03,564 ₹2,40,268.48 Lowest | 1,08,845.82 ₹2,52,522.3 |
| 9.00 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. | - | - | - | - | - |
| 10.00 | Local best quality Teak Wood | - | - | - | - | - |
Tender Value
₹1.4 Cr
EMD Value
₹2.7 L
Closing Date
22 Oct 2025, 12:00 pmClosed
EE,Engg.Cell(Valley-1),Hand FW
EE,Engg.Cell(Valley-1),Hand FW
UPGRADATION OF SDH JIRIBAM BUILDING
2025_HFW_3000_1
HandFW/e-Tender/2025-26/148
Open Tender
Civil Works
Works
JIIRBAM
Please refer Tender documents.
3 documents required · 3 mandatory
₹10,000
EE,Engg.Cell(Valley-1),Hand FW
₹2.7 L
29 Oct 2025
17 Oct 2025
24 Oct 2025
17 Oct 2025
22 Oct 2025
17 Oct 2025
Amount
DISMANTLING & DEMOLISHING WORK
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
Of area 3 sq. metres and below.
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
12 mm cement plaster of mix 1:4 (1 cement:4 coarse sand).
WOOD WORKS
Providing wood work in frames of doors, windows, clerestory windows and other frames.wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately
Local best quality Teak wood
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.
Local best quality Teak Wood
35 mm thick Shutters
Providing & fixing bright finished brass Tower bolts (barrel type) with necessary screws etc. complete.
Providing and fixing bright finished brass door latch with necessary screws etc. complete :
Providing and fixing chromium plated brass handles with necessary screws etc. complete:
PAINTING WORKS
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaece to prepare the surface even and smooth
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade
New work (two or more coats) over and including priming coat with cement primer:
Finishing walts with Acrylic Smooth exterior paint of required shade:
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cemont paint applied @ 2.20 kg/ 10 sqm).
Applying priming coat:-
With ready mix pink or grey primer of approved brand and manufacture on wood work(hard and soft wood)
Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture to give an even shade.
Two or more coats on new work
Supplying and applying bituminous solution primor on roof and or wall surface at 0.24 litre per sqm.
Grading roof for water proofing treatment with
Cement concrete 1:2:4 (1 cement: 2 coarse sand 4 graded stone aggregate 20mm nominal size)
SANITARY INSTALLATION
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap. 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handlo lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
White Vitreous china Orissa pattern W.C. pan of size 580 x 440 mm with integral type foot rests
Providing and fixing white vitreous china flat back or wall corner type lipped Iront urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with utomatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete. including painting of fittings and brackets, cutting and making good the walls and floors wherever required
One urinal basin with 5 litre white P.V.C. automatic flushing cistern
Providing and fixing white vitreous china pedestal for wash basin eaccompletely recessed at the back for the reception of pipes and fittings
Providing and fixing P.V.C. tor sink or wash basin including P.V.C. waste fittings complete.
Flexible pipe
32 mm dia
Providing and fixing 600x450 mm beveled edge mirror of superior glass (Of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass scrows and washers complete.
Providing and fixing PTMT liquid soap container 109 mm wide, 125 each 195.80 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms
Providing and fixing PTMT urinal cock of approved quality and colour.
15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms.
Providing and fixing UPVC soil, waste, rain water and vent pipes including all requisite fittings, jointing of pipes & fitting with solvent cement, tenching, refilling & testing of joints complete as per direction of Engineer in charge
75 mm dia
110 mm dia
WATER SUPPLY:
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work. including cutting chases and making good the wall etc.
15 mm diameter
25 mm diameter
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
15 mm diameter
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make confcrming to 1S.8931.
15 mm diameter
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete
25 mm diameter
Providing and placing on terrace (at all floor levels) polyethylene per litre 10.20 water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
SH: Providing of Internal Electrification Installation.
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in PVC casing and casing with mudular type switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
Group A
Group B
Group C
Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed stel conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
2X 4 sq. mm + 1 X 4 sq. mm earth wire
2 X 10 sq. mm + 1 X 10 sq. mm earth wire
SWITCHES AND ACCESSORIES
5/6 Amp switch
15/16 amps switch
3 pin 5/6 amp socket outlet
6 pin 15/16 amps socket outlet
S/F 25 amp Air Conditioner powerplug point i/c 4 module metal box on surface or in recess 4 modules plate and cover in front, 25 amp modular starter 25 amp modular socket oulet and 25 amp plug i/c connection etc as reqd.
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.
S/F MODULAR BOXES BASE AND COVER PLATE
1 or 2 Module (75mm X 75 mm)
4 Module (125mm X 75mm)
12 Module ( 200mm X 150mm)
S/F SP MCB DB
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
12 way double door
S/F MCB Isolator
S/F 'B' series SP MCB
Supplying and fixing 5 amp to 32 amp rating 230 V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc as reqd
Single pole
S/F (following rating) double pole 240 V isolator in the existing MCB DB complete with connection testing and commissioning as reqd.
S/F RCCB in cubical panel board
P/F (following rating) RCCB in existing cubical panel board i/c drilling holes in cubical panel making connectiobn etc as reqd
40 amp Two pole RCCB 100 mA/300mA
EARTHING
Earthing with copper earth plate 600mm X 600mm X6mm thick i/c accessories and providing masonry enclosure with ver plate having locking arrangement and watering pipe etc. (ut w/o charcoal or coke and salt) as reqd.
BUS BAR CHAMBER
S/F Bus bar chamber with 4 strips copper bus bar of length 900mm suitable for 400 amp capacities complete with all accessories i/c connection earthing the body etc as reqd.
Laying of 1 No.PVC insulated PVC sheathed power cable of 1.1KV grade of size not less than 25 sqmm drect in ground i/c excavation, sand cushioning, protective covering and refilling the trench etc as reqd
FIXTURES/FITTINGS
S/F 48'' sweep (1200mm) A.C.Ceiling fan complete with down rod canopy 3 (three) blades but without regulator etc as reqd.(Make Bajaj/Usha or similar)
S/F 305mm sweep exhaust fan complete with all accessories i/c connection etc as reqd.
S/F 1.5 ton capacty split type Air conditioner (Diamond 3 star 5G 29 G-SC 18 FD 3 WJH) complete with Indo voltage stabilizer Automatic 4 KVA (140-280 for 1.5 ton)
Supplying , Installation, testing and commissioning of LED Lamp (havell,s /Bajaja/Phillips/Cromton). Including connection etc. as required.
With CFL 12/15 Watts Lamp.
Supplying, Erection, testing and commissioning of (pre-wired) wall bracket/ceiling fittings of all sizes and shapes containing CFL/LED/W GLS lamps per fitting, complete with all accessories including connection etc. as required (havell,s /Bajaja/Phillips/Cromton).
Ceiling fitting (Surface) with 15/18 watt LED Lamp.
Supplying, Instaling, testing and commissioning of (pre-wired) bulk head fitting with glass complete containing LED lamps per fitting, complete with all accessories including connection etc. as required (havell,s /Bajaja/Phillips/Cromton).
With 7 Watts LED Lamp.
M/S Acura Ventures (BID ID -10042)
M/S KIM & SONS CONSTRUCTIONS & EQUIPMENTS (BID ID -10045)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 6.41 MB
BOQ_3274.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .