CERTAIN REPAIRS TO AREA DRAINAGE PATHWAYS CULVERTS COMPOUND SECURITY WALL FENCING KERB STONES IN PRTC 106 INF BN 2 PARA SF AND CLEANING OF SEWAGE LINE MH ST TO UPKEEP HYGIENIC CONDITION AT HQ NAVAL DET NAVY AND COMPREHENSIVE MAINT AND RED

Amount

Taking down of existing Water Proofing treatment of any type (APP Membrane, Cement or earthen tile, Mud phuska or lime concrete) including cement plaster of any thickness and removing bitumen coating/mud phuska dirts, etc over original RCC roof slab by grinding, Picking, sweeping clean and washing down with water to remove dust complete. Note : Rate includes for removing debris outside defence land

M&L providing cement concrete type B0 1:2:4 (12.50mm graded stone aggregate) in copings, parapets and railing up to 60cm height, leveling concrete for Roof slab, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as including demolition & removal of cement concrete from the MD land of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for providing APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017, 3mm thick and weighing not less than 3.60Kg/Sqm reinforced with non woven polyster / bonding bitumen @ 0.40 ltr / Sqm and torch applications of membrane with 75mm side overlap and 100mm end lap over and including 10mm thick screed bed in CM 1:3 with liquid WPC ass per manufacturer's instructions and applying a coat of solar reflective bituminous alaminum paint on top @ 0.10 ltr / sqm complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sq m but not exceeding 2 Sq m and Re-fixing in same opening complete all as specified and directed

Taking down chowkats (without taking of shutter from the frame) not exceeding 1.5 sq m each including making good the disturbed surface in PCC 1:2:4 type B0 or CM 1:3 all as specified and directed

All as per Item No 5 above, but exceeding 1.50 sq m and not exceeding 4.00 sq m each

Taking down shutters of any description exceeding 1 Sq m but not exceeding 2 Sq m each all as specified and as directed

Solid PVC door frame (Single rebated) of size 60 mm x 30 mm made out of solid foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100x8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed

M & L for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing with wood free EPS .

S&F 2nd class hard wood plain, solid, straight chowkats and frames, clean sawn, frame rebated on the solid , rounded or chamfered, put together with glue pinned at joints etc complete all as specified and as directed

S&F Flush door shutters 35mm thick, factory made as per IS:2202 (Part-I 1999) solid core construction, with block board core with decorative face veneer both faces with lipping/frame to match as per drawing fixed to chowkats all as specified and directed

S&F 2nd class hard wood 35 mm thick factory made glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc, size of members of shutters as specified in SSR Part-1, Section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified and as directed Note: Supply only 4 mm thick sheet glass and wire mesh be measured and paid separately.

S&F factory made Plain framed, paneled shutter (two panel) of 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. rail and style are of 2nd class hardwood & The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated fixed to chowkats all as specified and as directed.

S&F for mild steel work as in hold fast made in flat iron all as specified conforming to Fe-290, Grade 165.

M & L for powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified )

M & L Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. Note: Supply only 4 mm thick sheet glass and wire mesh be measured and paid separately.

S&F Anodized aluminum powder coated (of any shade/colour as approved by GE ) ventilators with adjustable 4mm thick figured glass louvers, fixed in qtr portion, without sash bars, aluminum section weighing not less than 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodized aluminum snap beading, screws, including stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.18mm including complete etc all as specified and directed by the Engineer-in-charge (Size of Ventilators = 600 x 900 mm)

M & L for powder coated (minimum coating not less than 50 micron) aluminium Deco grill of pattern DG-104 with minimum thickness of 6 mm, riveted to frames using aluminium U channel, complete all as specified and as directed.

S&F Box type Steel Windows/Ventilators double side shutters (Windows side hung type , Ventilators top hung) pressed steel frames made out CRC Sheet of 80x60x1.25mm double rebated, Shutters box type made out of CRC Sheet of 40x20x1.0mm , windows & ventilator shutter fixed made of glass and gauge fixed with box type hinges, Aluminium die cast handles for glass shutters, Iron flat type handles for mesh shutters, Telescopic stays, etc complete all as specified including 12mm square guard bars/grill welded with steel frame (100c/c horizontally) all as specified and directed by Engineer-in-Charge. NOTE: (i) Payment under this item will be make combined for steel frames, steel shutters and Guard bard/Grill, However unit rate quoted shall deemed to include cost of beading, fittings such as handles, hinges, Telescopic stays, locking arrangements and fixing of glass and wire mesh etc. (ii) Supply only 4 mm thick sheet glass and wire mesh be measured and paid separately. (iii) Weight of Grill/Guard Bars, handle, hinges and locking arrangements shall not be accounted for payment purpose . (Note : All Windows/Vent design as per CECZ TD drg No 539)

M & L for plain cement concrete for filling of steel door frame/box type steel window/vent type C0,1:3:6 using 12.50mm grade stone aggregate

Supply only Sheet glass 4mm thick ordinary quality and glazing with oil putty or in wooden /steel /aluminium /rubber beading in square not exceeding 0.5 Sq m in each pane and all as specified.

Supply only Sheet glass 4mm thick ordinary quality and glazing with oil or in wooden /steel /aluminium /rubber beading putty in square exceeding 0.5 Sq m in each pane and all as specified.

Supply only stainless steel wire cloth 0.36mm nominal dia and average width of aperture 1.40mm and fixed with tinned tack or galvanized wire staple all as directed fixed.

M&L preparing new wooden surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed

M & L applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10 cm width or girth including preparation of new steel surfaces

Preparation of old painted steel surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S & F Butt hinges stainless steel 100mm long and fixed to door frame and shutter duly welded/screwed complete all as specified and as directed

S & F Butt hinges medium weight, cold rolled mild steel 100mm long and fixed to door frame and shutter duly welded/screwed complete all as specified and as directed

S&F Aluminium anodized tower bolt 150mm long of extruded section etc complete all as specified and as directed

S&F Aluminium anodized tower bolt 200 mm long of extruded section etc complete all as specified and as directed

S&F 125 mm long aluminium handle, cast type, anodized etc complete all as specified and as directed

S&F 150 mm long aluminium handle, cast type, anodized etc complete all as specified and as directed

S&F aluminium alloy, anodized sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed

S & F 140 mm floor door stopper of aluminium alloy powder coated, with hard down steel spring all as specified and as directed.

S&F mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller plate complete

S&F aluminium snake guard strip 30mm thick powder coated with rubber ring to be fixed on bottom of existing door shutters to guard from snakes/frogs complete all as specified and directed.

S&F Rubber door buffer 125mm size fixed with brass screws complete all as specified and directed

S&F Eye doors viewer(Magic eye) made of stainless steel complete all as specified and directed

M & L 4 mm thick figured glass, pin head type and glazing with oil putty/wooden or steel beading in squares n.exc 0.5 Sq m in each pane all as specified and as directed. including Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and as directed.

M&L for 3mm thick Sheet glass, ordinary quality and glazing with oil putty / wooden or steel beading in squares n.exc 0.5 sq m in each pane all as specified and as directed. including Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and as directed.

S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm fixed with MS screw or nut bolts with or without wooden or steel beading in repairs all as specified and as directed.

S & F in repairs Aluminium anodized barrel towel bolts of extruded section of length 150 mm all as specified and as directed.

S & F in repairs Aluminium anodized barrel towel bolts of extruded section of length 200 mm all as specified and as directed.

S & F in repairs Aluminium alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections including taking down old sliding door bolt 300 mm all as specified and as directed.

S & F in repairs Extruded alloy handles fabricated type anodized of size 125 mm all as specified and as directed.

S & F in repairs Extruded alloy handles fabricated type anodized of size 150 mm all as specified and as directed.

S&F in repairs Butt hinges medium weight cold rolled mild steel of size of hinges 100mm

S & F in repairs 140 mm floor door stopper of aluminium alloy powder coated, with hard down steel spring all as specified and as directed.

S&F in repair mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed.

S&F in repair aluminium snake guard strip 30mm thick powder coated with rubber ring to be fixed on bottom of existing door shutters to guard from snakes/frogs complete all as specified and directed.

S&F in repair Rubber door buffer 125mm size fixed with brass screws complete all as specified and directed

S&F in repair Eye doors viewer(Magic eye) made of stainless steel complete all as specified and directed

S & F in repairs 18/19mm thick Pre-laminated particle board, interior grade, pre-laminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, alround 6mm thick teak fillets fixed in kitchen Cabinet or cupboards all as specified.

M&L for Plain fillets square, rectangular or triangular in section clean sawn , secured with nails or brads of second class hard wood fixed to cupboard shutter including taking down old fillets exceeding 6 & n exceeding 13 sq cm cross section area all as specified and directed.

S&F Continuous (piano) hinges 30mm width of flaps (when open) , mild steel, bright finish or electro galvanized

S&F 100 mm size hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws /fixed in repairs.

S&F Magnet door catcher made of stainless steel complete all as specified and directed

S & F 40 mm dia cupboard knobs fixed with nut, screw and washer of Brass, polished complete all as specified and as directed.

S & F in repairs Hasp and staple safety type of size 100 mm of aluminium anodized all as specified and as directed.

S & F in repairs 40 mm dia cupboard knobs fixed with nut, screw and washer of Brass, polished complete all as specified and as directed.

S & F in repair Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F in repairs stainless steel decorative curtain rod of 20 mm bore with wood finishes (weight not less 300 grams per running meter) including fancy finale caps cap etc complete all as specified and as directed

S&F in repair Bracket for curtain rod of dia 20 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long including wooden base etc complete etc complete all as specified and as directed

M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite ,including cutting and polishing laid on 15 mm thick screed bed in CM 1:4 set and jointed including dismantling of old stone slabs laid bedded and pointed in any mortar complete all as specified

M & L for Providing edge moulding to 18-20mm thick granite stone any description of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete

S & F in repair kitchen sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in mortar on to dwarf wall or including fixing cantilever brackets and connecting union pipes overall size 915x460mm bowl size 410x330x160mm complete.

S&F in repair sinks made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete.

S&F in repairs stainless steel plate rack of 0.63mm thick sheet, size 600 mm x 750 mm x 250 mm, complete all as specified and as directed

Opening of air lock/blockage in GI / CPVC pipe line of any dia from outlet of water tank to all internal GI/CPVC pipes / fittings to smooth flow of water from bib taps / showers / WHB pillar tap / stop valves/ mixers complete by air pressure / water gravity pressure all as specified and directed.

S&F in repairs brass spindle of any type with nylon washer and removing leakage of water of any bib tap/stop valve/angle/Pillar cock/wall/sink mixer suitable for 15mm bore pipe complete all as specified.

S&F in repairs brass spindle of any type with nylon washer and removing leakage of water of any concealed stop valve suitable for 15mm bore pipe complete all as specified.

S&F in repairs brass elbow suitable for CPVC pipe 20mm outer dia complete all as specified and directed.

S&F in repairs brass elbow (3/4 X ½) suitable for CPVC pipe 20mm outer dia complete all as specified and directed.

S&F in repairs Brass Tee suitable for CPVC pipe 20mm outer dia complete all as specified and directed.

S&F in repairs Brass Tee suitable for CPVC pipe 25mm outer dia complete all as specified and directed.

S&F in repairs Male Brass Threaded Adaptor (MTA/ MBTA) suitable for CPVC pipe 20mm outer dia complete all as specified and directed.

S&F in repairs Male Brass Threaded Adaptor (MTA/ MBTA) suitable for CPVC pipe 25mm outer dia complete all as specified and directed.

S&F in repairs Female Brass Threaded Adaptor (MTA/ MBTA) suitable for CPVC pipe 20mm outer dia complete all as specified and directed.

S&F in repairs Female Brass Threaded Adaptor (MTA/ MBTA) suitable for CPVC pipe 25mm outer dia complete all as specified and directed.

S&F in repairs CPVC Tank Adaptor suitable for CPVC pipe 20mm outer dia complete all as specified and directed.

S&F in repairs CPVC Tank Adaptor suitable for CPVC pipe 25mm outer dia complete all as specified and directed.

S&F in repairs CPVC Union suitable for CPVC pipe 20mm outer dia complete all as specified and directed.

S&F in repairs CPVC Union suitable for CPVC pipe 25mm outer dia complete all as specified and directed.

S&F in repairs CPVC tank nipple 20mm dia suitable for HDPE water tank. (Minimum weight 20mm- 45gms )

S&F in repairs CPVC tank nipple 25mm dia suitable for HDPE water tank. (Minimum weight 25mm- 65gms)

S&F in repairs 15mm PTMT extension Nipple. (Minimum weight 15mm-18 grams)

S&F in repairs 15mm PTMT flange, (Minimum weight 15mm-5gms)

S&F in repairs 20mm CPVC gate valves, with lever, screwed both ends for iron pipe and fixed

S&F in repairs 25mm CPVC gate valves, with lever, screwed both ends for iron pipe and fixed

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm including 32 mm dia brass waste coupling ,chromium plated fancy type pillar taps, waste pipe, 600 mm long PVC connection & brackets including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing & supply and waste pipe.

S&F in repair Vitreous china wash down water closet pan (pedestal Pattern) white, including connection to drain & or out going pipe) and to flushing pipe of 10 litre capacity, anti siphonage pipe, seat and cover for pedestal pan including PVC flushing cistern and 450 mm long PVC connection etc. complete. Note : The quoted rate shall include cost of closet, flushing cistern, flush pipe, PVC connecting pipe,

Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC SWR P trap 10 litre PVC flushing cistern,600 mm long PVC connections connecting to flush pipe and to anti siphonage pipe, etc. complete including making good to floor, fixed in repairs complete all as specified and directed.

S&F in repairs 10 liters capacity PVC valve less syphonic action flushing cistern low level with inlet ball valve, flush pipe of polythelene of low or high density or PVC 32mm dia complete all as specified and directed.

S&F in repairs siphon kit including ball valve, handle etc for low level flushing cistern complete all as specified and directed.

Supply & laying 20 mm outer dia CPVC pipes SDR 11 (Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors including all fittings and specials including taking down 15 mm GI tubing and connections complete all as specified.

Supply & laying 25 mm outer dia CPVC pipes SDR 11 (Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors including all fittings and specials including taking down 20 mm GI tubing and connections complete all as specified.

S&F in repairs Brass CP wall mixer for mixing hot and cold water screwed down for 15 mm dia pipe and fixed complete all as specified and directed.

S&F wash basin Brass CP mixer for mixing hot & cold water screwed down for iron pipe 15 mm and fixed in repairs

S&F in repairs 15mm bore CP pillar taps, fancy type, cast copper alloy with capstan heads, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F 15mm stop valves/ angle valves cast copper alloy, screwed down, high pressure, fancy type, chromium plated screwed both ends for iron pipe or for unions and fixed in repairs.

S&F 2 way bib cock, suitable for 15 mm dia pipe, with angle valve combination brass chromium plated, fixed in repairs.

S & F chromium plated long body bib tap 15mm dia with CP flange as fixed in repair all as specified and as directed.

S&F bib tap 15mm, standard of CP fancy type, chromium plated any colour high pressure screwed for iron pipe and fixed in repair.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position including taking down old complete in all respect as specified.

S & F in repairs Towel rail 20 mm dia, 600 mm long, stainless steel glossy finish complete all as specified and as directed.

S&F125mm dia brass chromium plated shower rose with swivel joints fixed in repairs .

S&F in repairs Soap dish chromium plated brass all as fixed in wall as per manufacturers instruction.

S&F in repairs Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed."

S&F in repairs PVC Mirror cabinet of size 400x500 mm complete all as specified and as directed.

S & F in repair PVC connection (Suitable for Cold Water Supply) 15 mm size with PTMT nuts of length 450 mm, all as specified and as directed.

S & F in repair PVC connection (Suitable for HOT Water Supply) 15 mm size with PTMT nuts of length 450 mm, all as specified and as directed.

M&L 32 mm dia waste fittings, brass, chromium plated for sinks, basins etc with long screwed shanks and flynuts, flange end fixed in repair complete all as specified and as directed

M&L 75 mm dia waste fittings, brass, chromium plated for sinks etc with long screwed shanks and fly nuts, flange end fixed in repair complete all as specified and as directed

M&L in repairs 32mm dia, 800mm long corrugated waste pipe complete all as specified and as directed.

S&F in repair 15mm dia Bib tap PTMT fancy type any colour screwed, for iron pipe and fixed

S&F in repair 15mm dia Pillar tap PTMT fancy type any colour screwed, for iron pipe and fixed

S&F in repair 15mm dia angle stop valve of PTMT any colour pressed screwed, for iron pipe and fixed

S & F PVC sintex tank cover suitable for 500/1000 litre capacity water tank complete as in repairs

S&F in repair plastic water closet seat cover for western & indo western pedestal pan closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified and directed.

Petty repairs to leaking water in bib taps, pillar taps, stop cock , angle valve, PVC connection waste pipes, float valves, concealed stop cock. GI pipe joints bottle traps etc of any description by changing the washers etc or any other minor accessories to make the system functional complete all as specified and directed

Petty repairs to high/low level flushing cistern by adjusting the float valve, leakage of PVC connection, PVC/GI bend replacing of rubber washer check nuts plugs etc for any type of flushing cistern complete all as specified and directed

Disconnecting to existing PVC tanks, setting aside (for lowering down if required) for repairs, if hoisting if required reconnecting and re-fixing in position exceeding 250 n exc. 500 litre including cleaning of overhead tank including removing the sludge washing down with detergent powder & writing the date of cleaning with paint complete all as specified and as directed

Disconnecting to existing PVC tanks, setting aside (for lowering down if required) for repairs, if hoisting if required reconnecting and re-fixing in position exceeding 500 n exc. 1000 litre including cleaning of overhead tank including removing the sludge washing down with detergent powder & writing the date of cleaning with paint complete all as specified and as directed

M & L for 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including 20 mm dia ball valve and fittings including dismantling existing water storage tank, complete all as specified.

M & L for 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including 25 mm dia ball valve and fittings including dismantling existing water storage tank, complete all as specified.

S & F in repairs 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed [Minimum weight for 20 mm – 210 grams] .

S & F in repairs 20 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed [Minimum weight for 20 mm – 210 grams] .

Dismantling of floor, hearth or wall tilling including cement mortar bedding (but not backing) and removing rubbish off from premises.

Demolition of cement concrete and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and as directed.

M&L Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sq m but not exceeding 0.11 Sq m, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes all as specified and as directed.

M&L Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sq m but not exceeding 0.18 Sq m, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes all as specified and as directed.

M & L Glazed ceramic tiles in vertical surfaces 350 x 250x 7 mm/ 450 x 350 x 7 mm/ 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over & including 10mm thick in screed CM 1:4 on brick work or concrete surfaces to receive wall tiles all as specified and as directed.

M&L for cement concrete 1:2:4 type, B0 using 12.5mm graded stone aggregates as in copings, Chajja /kerbs stone, roof padding / staging of water tank etc including necessary form work, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed

M & L cement concrete type B0 1:2:4 (12.5 mm graded stone aggregates) 25mm thick finished even as in leveling concrete for floor.

Renewing Glazed tiles/non-skid tiles in patches, area n exceeding 5 sq m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete

Material and labour for water proofing to sunken portions of WCs, bathroom and kitchen etc by applying water based, cold applied, single component, elastomeric in-situ seamless monolithic coating ready to use acrylic modified bituminous liquid membrane with the procedure in sequence all as specified and as directed. SURFACE PREPARATION (i) Removing all loose gravel, dirt, oil, grease and foreign matter by jet of dry air and cleaning the surface mechanically or by grinding to make it smooth before application. (ii) Repairing all cracks by cutting “V” groove and fill with PMC mortar prepared in the ratio of Shalicrete : cement : sand (1:2:5) or equivalent. (iii) Providing 50 mm x 50 mm coving made out of PMC mortar as above. MATERIAL PREPARATION (i) Stir Tar Felt® LM or equivalent by a slow speed mixture (approx. 400 rpm) fitted with a suitable mixing paddle to ensure a homogenous mix. (ii) After stirring, wait for the product to settle in order to let entrapped air escape. Contd/-- 138

Contd/--137 WATERPROOFING APPLICATION (i) Slightly damp the surface. Avoid standing water / ponding. (ii) Prime the surface with a mixture of Tar Felt® LM or equivalent and potable water in the ratio of 50:50 and apply @400 gram / m2 of the mixture and allow it to touch dry. (iii) Apply first coat of Tar Felt® LM @ 0.70 kg / m2 by brush / roller / airless spray while the primed surface is tracky, For faster and smoother application, airless spray is preferred. (iv) Spread fiber glass net of 45 gsm with overlap of 50 mm in both directions when the surface is till tacky. (v) Allow 1st coat to dry for 10-12 hrs. (vi) Apply second coat of Tar Felt® LM @ 0.70 kg m2 by brush / roller / airless spray for final DFT of 1000 micron in two coats inclusive of fibre glass of 45 gsm (theoretical coverage depending on surface conditions). (vii) Sprinkle sand @ 200 gram / m2 over the final vertical coating when the surface is still tacky to facilitate plastering. (viii) Ensure final curing time of 36 hrs before allowing / carrying out any further work. (ix) Conduct ponding test after 7 days of curing at ambient temperature.

M&L providing cement concrete type E2 1:5:10 (40mm graded stone aggregate) in foundations, filling and mass concrete for sunken floor including Demolition of cement concrete exceeding 15 cm thickness but above ground floors including removal of debris from MD Land complete all as specified and as directed.

Demolition of brick / stone / boulder / precast concrete articles and precast concrete block built in cement mortar etc complete all as specified.

M&L for Pre-cast cement concrete block masonry, type C1 1:3:6 (using 20mm graded stone aggregates) in CM 1:6 with solid blocks, exc 10cm in width and setting in mortar, complete.

M&L for Pre-cast cement concrete block masonry, Type C1 1:3:6 (20 mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4 , complete etc complete all as specified and as directed

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in fixing of post/ drain foundation filling and mass concrete complete all as specified and directed.

Taking down cement plaster of any description including racking out joints, hacking for key and disposal of debris to out side MD land all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished plastered surface even and smooth without using extra cement

M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 with WPC, finished plastered surface even and smooth without using extra cement Note :- WPC will be measured and paid separately

Supply only liquid water proofing compound

M&L for rendering 5 mm thick on ceiling /RCC surfaces in cement mortar 1:3, finished plastered surface even and smooth without using extra cement

M&L Preparation of newly plastered surfaces and applying two coat of oil bound distemper over a coat of alkali resistant primer over 1.5 mm thick wall care putty complete all as specified and directed Note : Quoted rate shall also include for wall care putty.

M & L preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat primer complete all as specified and as directed.

M & L for preparing newly plastered ceiling surfaces and applying three coat of white wash complete all as specified & as directed.

Preparation of old treated plastered or unplastered wall surfaces of any description including brooming down with steel wire brushing scrapping down smoke soot’s, moulds, moss and efflorescence, salts, trading oil and greasy spots etc and applying one coat of cement base paint wash on wall surfaces all as specified and as directed.

S & F in repair 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement all as specified and as directed.

S & F in repair grating doom 100 mm dia of PTMT complete all as specified and as directed

S & F in repair 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/ laid in trenches including necessary fittings all as specified and as directed.

All as per item No 156 above but 110 mm dia .

S&F in repair 75mm dia PVC (SWR) Bends with access door of any radius

All as per item No 156 above but 110mm dia

S&F in repair 75mm dia PVC (SWR) junction single (single T) equal or unequal with access door

All as per item No 160 above but 110mm dia

S&F in repair 110mm dia PVC(SWR) branch piece, single (single Y) equal or un equal with access door

All as per item No 162 above but 75mm dia

S&F in repair 110mm dia PVC(SWR) branch piece, (double Y) equal or un equal with access door

All as per item No 164 above but 75mm dia

S&F in repair 75mm dia PVC(SWR) vent cowl

All as per item No 166 above but 110mm dia

Demolition of cement concrete reinforced in ground floor and paving n exceeding 15cm thick (below or above ground level) complete all as specified and directed.

M&L for reinforced Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and directed. Note : Reinforcement shall be measured and paid for separately.

Mild Steel TMT bar 6 to 8mm dia cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete.

Dismantling of Fencing posts or struts (wood, steel RCC) any section, posts embedded in concrete, brick work, masonry etc, including taking out embedded portion and making good disturbed ground complete all as specified and as directed

S & F mild steel works conforming to Fe 290 Grade E-165 as in angle iron post and struts in fencing including cutting tops to shape as directed drilling holes notching for wire etc. including all necessary drilling, bolting of riveting etc. etc complete all as specified and as directed

S&F chain link fencing with size of mesh 75x75mm and thickness of wire 2.8mm, including fixing of line wires/flats, rails, straining bolts etc including provision of binding wires including dismantling of Chain link fencing , any type and mesh etc complete all as specified and as directed ( Supply of MS line wire and flat iron, bolt & nuts measured & paid separately) complete all as specified and directed by Engineer-in-charge.

S&F in repairs Galvanized. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) including taking out existing barbed wire fencing

S&F of Mild steel screw bolts(Machine made, dia of neck 10mm) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut n exceeding 5cm long.

M&L for Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete.

Dismantling of Stone set paving of any description or in floors, aprons etc (Laid bedded and pointed in any cement mortar) including removing off the premises etc complete all as specified and as directed

Dismantling of stone slabs and tiles laid dry or laid dry and pointed of any description or thickness in floors, aprons etc.

M&L for 75 mm thick cement concrete type D- 2, 1:4:8 (40mm graded stone aggregate) as in sub base of flooring etc complete all as specified and as directed

M&L for 75 mm thick cement concrete type C- 2, 1:3:6 (40mm graded stone aggregate) as in plinth protection etc complete all as specified and as directed

M & L providing 100mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set ,jointed and pointed in neat cement slurry in floors.(with grey cement and pigments) over 20mm screed bed or bedding layer of mortar in CM 1:6 complete all as specified.

M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigments any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and as directed.

Mechanically pumping out sewage liquid from septic tanks of any size and depth and removal the same to distance/place as earmarked by state auth out side defence land including any type of T & P required etc. dewatering of water complete all as directed.

Removing carefully the cover slabs of man holes of any size and shape and removing the scum/sludge including any organic or inorganic matters to a distance exceeding 50m and not exceeding 1500m and depositing eco friendly where as directed by engineer-in-charge and setting the man hole cover in position in CM (1:6 ) after cleaning the sludge up to 1.50mtr depths of manholes Note: Manhole cover if provided new shall be measured & paid separately.

All as per item No 186 but depth of manhole exceeding 1.5m but n.exc 3.00mtr

All as per item No 186 but depth of manhole exceeding 3.00m but n.exc 4.00mtr Note:- (a) Contractor shall detail his supervisor to office of AGE B/R North daily by 9.00 AM who will report to concerned JE B/R /Engineer-in-Charge to receive all complaints of entire area under this contract. (b) Contractor shall provide service providers complaint cell located at AGE B/R (N) as per the complaints list given along with all requisite tools, equipments, including safely measures for attending complaint and ensure completion report by 5.00 PM same day. (c) Please note that all the complaints relating to sewage line shall be attended within same day (within 12 hour). In case of blockage in sewage line could not be detected/completed same day and concerned JE / Engineer-in-Charge is satisfied to the efforts applied but the same shall be attended and all blockage must be cleared by 24 hours (next day by 5.00 PM) without fails. (d) In case any complaint pertaining to clearing of blockage in sewage line is not removed /cleared within 24 hours (next day 5.00 PM). A penalty @ Rs. 200/- per complaint shall affected from contractor payments. (e) Blockage cleared between two man holes irrespective of length in between shall be treated as one complaint.

Cleaning of blocked sewage drain pipe 110mm dia till the flow of sewage/sludge water is smooth including taking out all sludge/mud from pipes by means of roding & remove to a distance exceeding 50m and n.exc 1500m and depositing eco friendly where as directed by engineer in charge. following size of pipes:-

All as per item No 189 but internal Dia of the Pipe 150mm

All as per item No 189 but internal Dia of the Pipe 200mm

All as per item No 189 but internal Dia of the Pipe 300mm

Clearing & removal of blockage, of any type in WC, bathroom, kitchen including floor / nahani traps, soil waste / vent pipes gully trap up to 1st manhole, in any situation by way of cleaning / de-sludging and removing foreign materials to a place as earmarked by state auth out side the defence land to the entire satisfaction of engineer-in-charge.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sq m on plan and not exceeding 1.5m depth in hard / dense soil etc complete all as specified and directed

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortar for 150 mm internal dia of pipe complete all as specified and directed.

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortar for 200 mm internal dia of pipe complete all as specified and directed.

M&L for cement concrete bed to drain pipes including packing under and hunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for cement concrete bed to drain pipes including packing under and hunching against the sides of pipe after they are laid & tested for 200 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for laying DWCP 150 mm dia pipes in trenches Class SN-4 conforming to IS 16098 (Part -2) including necessary fittings, complete all as specified and directed by Engineer-in-Charge-in-charge

M&L for laying DWCP 200 mm dia pipes in trenches Class SN-4 conforming to IS 16098 (Part -2) including necessary fittings, complete all as specified and directed by Engineer-in-charge

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 200 mm internal dia of pipe complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

M&L Extra for forming fair finished drain or channel 15/20/30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitered / stopped ends etc complete all as specified and directed.

Returning, filing in, excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm etc complete all as specified and directed

Removal of excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M&L MS rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of sheet of any type and any thickness complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of sheet of any type and any thickness complete all as specified and directed.

S&F 15mm stop valves cast copper alloy, screwed down, high pressure, fancy type, chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe or for unions and fixed in repairs

Karthick Constructions