Creation of infrastructure facility in connection with CSIR Waste to Wealth Mission Project at MSTD Building, CSIR-CGCRI, Kolkata.

Amount

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion

Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing & fixing mortice lock 4-lever narrow stile for aluminium door(sliding/openable) product code 9158 all complete as per direction.

Providing and fixing on no. working table having size 1500 mm x 750 mm x 750 mm (h) made of 25 mm pre laminated particle board with 2 mm PVC edge banding consisting 2 nos. drawer and 1 no. cupboard below the top including modesty of full height and 10 mm clear glass top. All complete as per direction of engineer-in-charge.

Medium Back Chair: Providing & placing Medium Back Chair having PU armrest, hydraulic height adjustable upright position locking arrangement & Nylon revolving base with special castor wheels having ergonomic design which gives good sitting posture . Seat size 17” x 17” (min) and sincro type tilting facility back having height from seat 22” (min) will be made of high density cushion foam with leatherite finish .

Wall panelling / partition with Melamine faced 3 layered flat pressed wood particle board of approved make and brand as per direction of Engineer - in - Charge of requisite grade bonded with phenol formaldehyde synthetic resin conforming to IS: 848 - 1974 (excluding the cost of supporting frame work and teak wood battens / lipping) In Ground Floor Prelaminated particle board conforming to IS: 3087 - 1985 and IS 12823 - 1990. Both side decorative laminated Exterior grade

9mm thick

Godrej Hydraulic door closer fitted and fixed complete.

Heavy type

ESCON INDIA