SPECIAL REPAIR TO BUILDING NO BK-65A AND 65A-1 IN BHARATPUR LINE AT MIL STN DHARAMSHALA

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as spcified and directed by Engr-in-Charge.

Taking down roof trusses above 4m and upto 8m, coupled rafters or trusseed beam including renewal of any defective members( timber renewed to be measured separately) and reassembling complete all specified and as directed by the Engineer-in-Charge.

Housing and fixing trusses above 4 metre & upto 8 metre after repairs including tightening up wedges, cotters bolts etc; complete all specified and as directed by the Engineer-in-Charge.

Dismantling timber scantling framed work over 40 sqcm in section as in rails, purlins & rafters complete all as spcified and directed by Engr-in-Charge.

Dismantling timber scantling framed work under 40 sqcm in section as in rails posts, purlins & rafters complete all as spcified and directed by Engr-in-Charge.

Second class soft-wood, clean sawn, unframed work as in scantling complete all as specified and directed by Engr-in-Charge.

All as per ser item No 06 here-in-before but except timber.

Preparation of new surface of wood and wood based materials of any description and girth, not otherwise described and treated with two coats of creosote oil, complete all as specified and directed by Engr-in-Charge.

Demolition of brick work or stone/ boulders masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings dressed stone work and precast concrete articles, complete all as specified and directed by the Engr-in-Charge.

Cutting into old masonry built in cement mortar to form toothings for and bonding in new brick or stone work including making good in cement mortar, complete all as specified and directed by the Engr-in-Charge.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed by Engr-in-Charge.

Plain cement concrete, M-7.5, type D-2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete, complete all as specified and directed by the Engr-in-Charge.

Walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, complete all as specified and directed by Engr-in-Charge.

Walling of Squared rubble stone masonry brought up to courses, well bonded, bedded and solidly hearted and built in cement mortar 1:6, complete all as specified and directed by the Engr-in-Charge.

All as per serial item no. 14 here-in-before but except stones.

Formwork to rough finished surface of edges of concrete flats, break in floors, opening in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar works all exceeding 20cm wide complete all as specified & directed by Engr-in-Charge.

RCC, M-15, type B-1 (using 20mm graded stone aggregates) as in Plinth beams/bands, complete all as specified and directed by the Engr-in-Charge.

RCC , M-15, type-B-1 (using 20mm graded crushed stone aggregates) as in lintel band and the like complete all as specified and directed by the Engr-in-Charge.

TMT bar 10 mm dia and over, cut of length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

All as serial item No. 40 here-in-above but 6mm to 8mm dia bars as in stirrups, spacers & binders.

Rendering 20 mm thick on stone masonry surfaces in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge

Two coats of oil bound distemper on newly plastered surface of walls including preparation, complete all as specified and directed by the Engr-in-Charge.

Preparation of old plastered wall surfaces and applying one coat of oil bound distemper preparation of surfaces complete, all as specified and directed by Engr-in-Charge.

Demolition of stone slab/ Trezzo tilesof any thickness in any position, complete all as specified and directed by Engr-in-charge.

Machine cut, mirror polished 20-25 mm thick kota stone as in flooring, over 15mm thick screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing grinding and polishing complete, all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

Rendering 10 mm thick in cement mortar 1:4 on stone masonary surfaces and surface finished rough to receive tiles, complete all as specified and directed by Engr-in-Charge.

Glazed ceramic tiles premium class, grade-I in vertical surface of size 300x200x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed by Engr-in-Charge.

Dismantling of wall & ceiling boards (fibre, pulp, insulation etc. or insulation board/slabs/blankets, any thickness, including cover fillets and removing from site, complete all as specified and directed by the Engr-in-Charge.

Aluminium Snap Grid Frame work for false ceiling of size 605x 605mm including hangers 6mm dia (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40cm long, complete including and calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid, complete all as specified and directed by Engr-in-Charge.

Galvanized corrugated mild steel sheeting 0.63 mm thick with two corrugations side lap, fixed with ' L' or 'J' hooks and washers, as in roof covering with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charge.

All as per ser item No 31 here-in-before but except sheets only.

PGI mild steel sheeting 0.63 mm thick, as in ridges, valley, gutter etc., fixed with L-type or J type hooks and washers, complete all as specified and directed by Engr-in-Charge.

Raised pointing to random rubble masonry, uncoursed or brought up to courses in cement mortar 1:4, complete all as specified and directed by Engr-in-Charge.

Two coats of cement based paint to newly plastered surfaces of walls including preparation of surfaces etc complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats or frames with shutters area exc. 1.5 sqm but n.exc. 4 sqm each (without taking off shutters from the frame) and removing complete, all as specified and as directed by the Engineer-in-Charge.

2nd Class hard wood, plain, solid chowkats and frame wrought, framed, rebated on the solid, rounded or chamfered put together with glue pinned at joints complete, all as specified and as directed by the Engineer-in-Charge.

Factory made 2nd class soft wood ( Sal/Hallock) plain, framed, panelled 40mm thick shutter (two panels) with lock rail and panels of 9mm BWP commercial playwood or 12mm veneered particle with commercial face veneers on both sides. The size of rail and style as per IS-1003 (Part-I) Kiln seasoned and chemically pressure treated all as specified and as directed by the Engineer-in-Charge.

30mm thick 2nd class soft wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8 clause 8.24 (a) supplied and fitted to chowkhats complete, all as specified and as directed by the Engineer-in-Charge.

100mm butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by Engr-in-Charge.

250mm long aluminium anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete, all as specified and directed by Engr-in-Charge.

300mm long sliding door bolt, ordinary rat tail rod pattern springs including roller and roller plate complete, all as specified and directed by Engr-in-Charge.

Aluminium handles, 150mm long, cast type, anodised, complete all as specified and directed by Engr-in-Charge.

Aluminium anodised barrel tower bolt, 150mm, extruded section, complete all as specified and directed by Engr-in-Charge.

Mild steel galvanised wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples or wooden beads complete, all as specified and directed by Engr-in-Charge.

Two coats of synthetic enamel paint over a coat of pink primer on new wood or wooden based surfaces of any description, n. exc. 10cm width or girth including preparation of surfaces complete, all as specified and directed by Engr-in-Charge.

75mm thick PCC, M-10, type C-2 ( using 40mm graded crushed stone aggregates) as in plinth protection, finished even and smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge.

15mm thick screed bed in CM 1:6 as in flooring to receive floor finishes complete all as specified and directed by Engr-in-Charge.

Taking down Cement plaster on brick or stone or concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed by Engr-in-Charge.

20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillar, window-cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade of granite complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing 15mm dia and connections including cleaning for refixing or removal to store, complete all as specified and directed by Engineer-in-Charge.

15mm bore steel water GI tubing, medium grade with all fittings, laid under floors or fixed in wall complete all as specified and directed by Engineer-in-Charge.

Gun matal gate or globe valve with iron wheel head screwed both ends for GI pipe and fixed, ISI marked complete for 15mm bore, complete all as specified and as directed by Engr-in-Charge.

Gun metal gate or globe valve with iron wheel head screwed both ends for GI pipe and fixed, ISI marked complete for 20mm bore, complete all as specified and as directed by Engr-in-Charge.

Bib taps, 15mm bore, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed by Engr-in-Charge.

Stop valve,15mm bore, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions suitable complete, fancy type, chromium plated, complete all as specified and directed by Engr-in-Charge.

Mild steel work as in wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed by Engr-in-Charge.

Taking down shutters of any description not exceeding 1.5 Sqm each, complete all as specified and directed by Engr-in-Charge.

Second class soft wood glazed and skeleton shutters, 30mm thick, open rebated and prepared to receive glass,gauze, etc; kail (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and as directed by the Engineer-in-Charge.

100mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-Charge.

75mm butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by Engr-in-Charge.

100mm long aluminium handles, cast type, anodised, complete, all as specified and directed by Engr-in-Charge.

3mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads in square n.exc. 0.50 sqm in each pane complete, all as specified and directed by Engr-in-Charge.

Demolition of cement concrete in ground floors & paving not exceeding 15 cms thick (below or above ground level), complete all as specified and directed by Engr-in-Charge.

Plain Cement concrete, 40mm thick, type B-1, M-15 (using 40mm graded crushed stone aggregates) as in floor, finished even & rough without using extra cement to receive floor finishes complete all as specified and directed by Engr-in-Charge.

Two coats of synthetic enamel paint on old wood or wooden based surfaces of any description, exceeding 10cm width or girth including preparation of surfaces complete, all as specified and directed by Engr-in-Charge.

Two coats of white wash including prepration of old plastered wall surfaces etc complete all as specified and directed by Engr-in-Charge.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings etc including removing material for taking credit ( credit shall be recovered as per credit Schedule attached) and also making good disturbed surfaces of wall, floors etc all as specified and as directed by the Engineer-in-Charge.

Point wiring with 1.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheathed FRLS electric cable 1100 volts cable and including PVC casing and caping of suitable size (as per conductor run) with all fittings/ accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm ( multi-stranded) copper conductor single core( Green colour) cable as continuous earth wire connected to common earth dolly including wooden box covered with 3 mm thick plastic laminated sheet ( Make Hylum) for one light point/ fan/exhaust fan point/ bell point etc controlled by one, one way switch,complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 69 here-in-above, but for one 3 pin socket outlet 5 Amp on the same board with other switches complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 69 here-in-above, but for one 3 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item No 69 here-in-before, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheathed electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

Socket outlet 2 in 1, 3 pin, 5 Amp, flush type complete all as specified and as directed by the Engineer-in-Charge.

Socket outlet 2 in 1, 3 pin, 5 Amp and 15 Amp, flush type complete all as specified and as directed by the Engineer-in-Charge.

Switch piano, flush type, single pole, one way, 15Amp, complete all as specified and as directed by the Engineer-in-Charge.

Switch piano, flush type, single pole, one way, 5/6 Amp, complete all as specified and as directed by the Engineer-in-Charge.

Ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all as specified and as directed by Engineer-in-Charge.

Replacement of existing unserviceable Sheet metal enclosure with new DB’s suitable for MCBs of single pole and neutral 08 way double door type with 200 amp rated bus bar complete all as specified and as directed by the Engineer-in-Charge. Note: (i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. (ii) The disturbed surface shall be match with existing surface. Make: Hensel/Legend/Hegger

MCB SPN 40Amp, breaking capacity 10KA, complete all as specified and directed by the Engineer-in-Charge.

MCB SP 6 to 32 Amp , 10 KA, 240 volt complete, all specified and as directed by the Engineer-in-Charge.

Universal batten for LED tube suitable for indoor applications tube light fitting 4Ft, 1x18W completeall as specified and as directed by the Engineer-in-Charge. Make:- Havells Cat part No. REGALBATTENT5UPTO1X18WDSBSWH or equivalent in Philips/OSRAM/Bajaj.

LED tubelight with very high efficacy suited for installation in existing batten all as specified and as directed by the Engineer-in-Charge. Make: Havells CAT Part No. CRYSTAL1213T8DSTL8WLED865S-GLASS or equivalent in Philips/OSRAM/Bajaj.

1x30 watt LED Bldg security light fitting with lamp pressure die cast housing with epoxy powder coated dark graphite grey colour finish, prismatic polycarbonate cover with individual LED lenses with GI pipe 1.5 mtr length clamps, nuts, bolts complete all as specified and directed by Engr-in-charge. Make: Havells Cat part No. ENDURAPEARLSL30WLED757SASYTOPCMP OR equivalent inSurya/bajaj.

Panel lighting 2x2 LED luminaire which providgs soft-light and glare free symmetrical illumination suitable for armstrong/Grid ceilling all as specified and as directed by the Engineer-in-Charge. per Make: Havels Cat Part NO. SCOOP2X2PLR34WLLED857S or equivalent in Philips/OSRAM/bajaj

Exhaust fans, AC, single phase, 230/240 V of size 300 mm sweep on wall with fixing metalic louvers (Iron shutter) in outer side of wall with suitable size anchor bolt. Making hole in wall for grouting and making good the disturbed surface including plaster work shall be part of job at no extra cost with specially designed metal blade and making connection of exhaust fan to ceiling rose by copper flexible wirecomplete all as specified & directed by Engr-in-Charge. Make : Havells/Crompton/Bajaj Note:Labour charges for fixing including electric connection & making hole in wall and plaster work shall be part of job at no extra cost.

Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick burried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire 4mm dia by means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) including iron angle frame 40x40x6mm and medium grade GI watering pipe 20mm dia with funnel and wire mesh and 15 mm bore GI pipe light grade proection pipe including excavation and charcoal ,common salt surrounded with 15cm all around the plate complete all as specified and shown in EP-3 of SSR Part-I & as directed by Engr-in-Charge.

1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire, one twin core cable flat or circular stranded conductor of size 10 Sqmm, 2 core, complete all specified and as directed by the Engineer-in-Charge.

House service bracket ( hook type) complete with 3.0m long GI pipe 40 mm dia med grade, two Nos 90 degree bends mild steel hook etc. complete all specified and as directed by the Engineer-in-Charge.

M/S DAYA SONS

M/S LASHKAR SINGH DEO

KISHAN CONTRACTOR

M/s Thakur Engineers