Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹2.7 L
EMD Value
₹5,419
Closing Date
31 Oct 2026, 3:30 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
CEO, HDA
Office of the Chief Executive Officer Haldia Development Authority City Centre P.O. Debhog Haldia 721657 Dist Purba Medinipur
REPAIRING/REPLACEMENT OF EXISTING 5 HP SUBMERSIBLE PUMP ALONG WITH ACCESSORIES AND LAYING OF PIPELINE AT TEMPORARY NANDIGRAM FIRE STATION, HARIPUR UNDER NANDIGRAM-I BLOCK, NANDIGRAM, PURBA MEDINIPUR
2026_HDA_1046324_1
07/HDA/EC(MECH) OF 2026 2027
Open Tender
MECHANICAL
Percentage
45 days
Haldia Development Authority, City Centre, Haldia
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹5,419
HDA, Haldia
14 Oct 2026
14 Oct 2026
2 Nov 2026
14 Oct 2026
31 Oct 2026
28 Oct 2026
27 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking out M,S, Pipes with specials and valves including stacking the same within a lead of 30M as per instruction of the Engineer-in-charge (Excavation. dewatering, earth filling etc. will be paid separately).
a) Pipe up to 750 mm diameter and depth of trench up to 2 Metre.
For 80 mm dia. | 30 | Metre | 1,330.42 | ₹39,912.6 |
| 2 | Surging of existing tube well with chemical treatment and bucket wash (prior to use of compressor machine) and developing the tube well with compressor machine at least 3 (three) days at 8 (eight) hours per day till the yield is obtained at least by 75% of the total specified yield of the tube well (measured by 'V' notch tank) and draw down is within the permissible limit of 10% variation and water so obtained after such washing and developing will be free from sand and bacteria for which test report fromthe Public Analyst is to be obtained. (The rate is inclusive of all labour and materials including hire charges of tools and plants and cost of materials.)
For tube well of size bigger than 100mm dia. with top enlargement to have yield of 6000 gallons per hour. | 1 | Each | 33,155.78 | ₹33,155.78 |
| 3 | Supplying, fittingand fixing 200 mm M.S. housing clamp of approved quality. | 1 | Per set | 2,659.65 | ₹2,659.65 |
| 4 | Providing 200 mm centre guide.
1) With Clamp | 1 | Per set | 152.32 | ₹152.32 |
| 5 | 2) With Flat | 1 | Per set | 84.49 | ₹84.49 |
| 6 | Supply of Motor Control Panel suitable for the supplied submerssible pump motor including Start - Stop push buttom Ammeter, Voltmeter, reset buttom, contractor, capacity etc. as necessary all complete as per direction. | 1 | Per set | 3,288 | ₹3,288 |
| 7 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
External work
80 mm nominal dia Pipes | 36 | Metre | 2,487.27 | ₹89,541.72 |
| 8 | Supplying,fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple,longscrew, reducing socket, reducing tee, short piece etc. fitted withholder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete inall respect including cost of all necessary fittings as required, jointing material sand two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.Payment for painting will be made seperately
80 mm dia. medium quality | 12 | Metre | 973.42 | ₹11,681.04 |
| 9 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)
80 mm nominal bore | 2 | Each | 1,386.9 | ₹2,773.8 |
| 10 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm(for water lines only)
For 80 mm dia. | 3 | Each | 6,653.29 | ₹19,959.87 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.14 MB
BOQ_2563975.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .