GE (N) P/TOKEN- 57 OF 2023-2024SPL REPAIRS TO BLDG NO T-05 (RICE SHED) AT 64 COY ASC (SUP) TYPE C AND SPL REPAIRS TO KOTE (BLDG NO-01) OF 64 COY ASC (SUP) TYPE C AND MW WORK IN THE AREA OF AGE B/R (CENTRAL) UNDER GE (NORTH) PUNE

Amount

Dismantling Single layer Mangalore Pattern or similar tiles in roofing and rubbish off the premises complete as as specified and as directed

Material and labour for roof tiles Mangalore pattern interlocking at side joints, laid dry in roofing complete all as specified and as directed.

- Ditto- all as per serial item No 2.00 here-in-before but using Mangalore pattern roof tiles obtained from dismantling.

Material and labour for ridge or hip tiles to suit Manglore pattern of roofing tiles,bedded and jointed in cement mortar (1:4) etc complete all as specified and as directed.

Dismantling tile battens, spaced at spacing exc 15cm centres to centres fixed with nails complete all as specified and as directed.

Dismantling wooden scantling of section 40 sqcm and over at any position complete as as specified and as directed

Material and labour for Second class hard wood, clean sawn, in scantling as in timber work all as specified and as directed.

Material and labour for second class hard wood, Wrought finish, in scantling as in timber framed and fixed in position work all as specified and as directed.

- Ditto - all as per serial item No.08 here-in-before but except timber.

S & F of mild steel work as in Roof battens etc and similar work complete using ERW or induction butt welded tubes conforming to IS1161-1998 grade ST.-240, fixed independently shelf tapping screw and in iron cleats etc complete all as specified and directed.

M&L for preparation of New steel surfaces of any description over 10cm girth or width and applying Two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting , any gauge or any thickness, as in roof coveringscomplete as as specified and as directed

Supply and fix for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with 'J' Bolts and washers, in roofs, walls etc with grade of zinc coating 120gms/ Sqm complete all as specified and as directed.

M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in roof kerbs or mud stops rounded or chamfered on edges and as in Coping and similar work complete all as specified and directed.

M&L Eves/Weather Boarding of AC Sheet 12 to 15mm thick, any size and shape including taking down existing board all as specified and as directed. Make: Shera wall/Everest/ V-board/Charminar or Eqvt.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm eachcomplete as as specified and as directed

Supply and fix aluminium powder coated louvered ventilator with provision of space for exhaust fan using 'Jindal' aluminium section - 20604 or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire an d1.40mm qperture etc complete all as specified and directed.

M&L for mild steel framed work such as grill, grating etc with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed.

Demolition of cement concrete in ground floors , pavings, sunken floor n exc 15 cm thickness etc (below or above ground level) and rubbish off from the premisescomplete as as specified and as directed

M&L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Hard/ Dense soil all as specified and as directed

Removing excavated soil to a distance exc. 1.50 km but n exc. 5 km and depositing where directed

M&L for Hardcore of Broken stone of gauge n. exc 63 mm deposited, spread and levelled in layers n exc 150 mm thick, watered and rolled / rammed to a true surface complete all as specified and as directed.

Material and labour for 75mm thick PCC (1:4:8) type D2 (using 40mm graded broken stone aggregate) as in sub base complete all as specified and as directed.

Material and labour 75mm thick PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in plinth protection finishing the surface even and smooth without using extra cement including demolition complete all as specified and as directed.

M&L for Machine cut kota stone 20-25mm thick over cement screed bed 20mm thick in CM (1:4) laid and jointed with grey cement slurry and pointed with grey cement and pigment to match the shade of the slab including rubbing and polishing complete (mirror polish) as in flooring/treads /slabs complete all as specified and as directed.

M&L for Machine cut kota stone 20-25mm thick over 10mm thick backing coat in CM (1:4) laid and jointed with grey cement slurry and pointed with grey cement and pigment to match the shade of the slab including rubbing and polishing complete (mirror polish) as in riser of steps/Skirting/dado and pillar complete all as specified and as directed.

M&L for Machine pressed rubber moulded glossy finish precast concrete interlocking paver block of any shape and size confirming to IS- 15658-2006 of 80 mm thick, M-40 grade in floor/ pavment laid over and including 25 mm thick Crushed sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles complete all as specified and as directed. Note- (i) Manufacturer test certificate shall be submitted along with Sample.

Dismantling of stone masonry built in cement mortar and in any position complete as as specified and as directed

M & L stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

- Ditto- all as per Srl item No. 29 above but except stones

Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etccomplete as as specified and as directed

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of on stone wall or brick work or concrete surfaces and finished even and smooth without using extra cement all as specified and as directed.

Material and labour for preparation of new plastered wall surface and applying two coats of oil emulsion distemper over a coat of alkali reistant primer over a thin layer of wall care putty (1 to 1.5mm thick) complete all as specified and as directed.

Dismantling structual steel work including doors, gates, rolling shutter, weldmess framed trusses etc.

S&F Steel Rolling shutter made of 1mm thick laths without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete, gear operated type with bevel gear box and crank handle all as specified and as directed.

Material and labour for Second class hard wood cover fillets, bull nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails, sectional area exc. 6 Sq.cm but not exc. 13 Sq.cm complete all as specified and as directed.

S&F Welded steel wire fabric to wood or steel members, weight per square meter n.exc 4 Kgs complete all as specified and as directed.

Material and labour for water proofing treatment to RCC roof slab complete all as specified below and as directed:- (a) Complete Removal of existing waterproofing treatment / membrane including screed bed/ plaster and removing the material where directed to a distance not less than 500m and cleaning the roof surface with water. (b) Providing 10 mm thick plaster on roof surface in CM (1:4) with using WPC as per manufacturers instructions. (c) Cleaning the plastered surface and applying Oil Based Bituminous primer @ 0.25 ltrs/ Sqm. (d) Applying hot blown bitumen of grade 85/25 @ 1.20 Kgs/ Sqm. (e) Laying APP Modified bituminous membrane 3mm thick weighing not less than 3.50 Kgs/ Sqm with non woven polyester mat as reinforcement with plain finish laid over hot bitumen on roof surface. (f) Applying two coats of bituminous aluminium paint on APP membrane surface. (g) Overlaps (end and longitudinal) shall be finished by torch application. Note No (i) : Overlaps shall be provided as under End Over Laps - 150mm Longitudinal overlaps 100mm. (ii) : Waterproofing Compound shall be measured and paid separtely under relevant item.

Supply only Liquid water proofing compound complete all as specified and as directed.

Demolition of cement Concrete any description and in any position from Roof, walls and floors complete as as specified and as directed

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregates) as in roof padding, of any thickness finished fair and even complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base, mass concrete all as specified and directed.

Material and labour for keyed pointing to random or polygonal rubble uncoursed stone masonary walls in cement mortar 1:3 including raking out joints complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of concrete, brick or stone masonry surfaces with integral water proofing compound finished even and smooth without using extra cement complete all as specified and as directed. (Waterproofing compound shall be measured and paid separately under relevent items.)

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces on wall with sagol finish all as specified and as directed.

Material and labour for rendering 5mm thick in cement mortar (1:3) on fair faces of brick or concrete surfaces in ceiling with sagol finish all as specified and as directed.

M&L for preparation of new plastered wall surfaces and applying two coats of acrylic distemper over a coat of primer as specified and directed.

M&L for preparation of new plastered ceiling surfaces and applying two coats of acrylic distemper over a coat of primer as specified and directed.

M&L for preparation of New surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer to wall complete all as specified and as directed by Engineer-in-charge.

Supply and fix rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening,conforming to Fe-290 Grade-E-165 complete all as specified and as directed.

M&L for preparation of New steel surfaces of any description over 10cm girth or width and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified and as directed

Supply and fix 1.00mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified anda as directed.

M&L for textured heavy duty exterior ceramic tiles of size 300mmx300mmx10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed of 20mm thick in CM (1:6) including dismantling of existing tiles complete all as specified and directed Make: Johnson Endura textured design or equivalent of Kajaria/Somany).

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as directed

S&F for aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

Material and labour for 20mm thick granite (of any type) work ( table rubbed and polished) in steps straight or round in shape , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Labour only for full round moulding to 18 to 20mm thick granite slabcomplete as as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premisescomplete as as specified and as directed

Dismantling of stone slabs,cudappah, of any description or thickness in floor/fixed to walls, apron etc laid bedded and pointed in cement mortar complete all as specified.

Dismantling of ceiling board of any description and any thickness including cover fillets etccomplete as as specified and as directed

M&L for coloured glazed ceramic tiles of size 600mm x 300mm x 7 to 8mm thick tiles of colour and pattern as approved by GE, as in vertical surface, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick screed bed in cement mortar 1:3 complete all as specified & directed.

M&L for 8 to 10 mm thick Gypsum Board with PVC laminated false ceiling board on and including GI powder coated grid work of size 605mm x 605mm with using 32.0 mm x 23.5mm x 1.5 mm thick main tee, 26.5 mm x 23.5 mm x 1.28 mm cross tee and 23.5mm x 23.5mm x 1.5 mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways complete all as specified and as directed. Make :- Armstrong, Diaken, Gyprock, New Age. Note: Height of ceiling is above 5 metres.

S&F shelves made of HDHMR (high density high moisture resistance ) board manufactured with hard wood, prelaminated both sides white in colour 18mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8mm thick, cut to shape & size of shelves complete all as specified and directed. Make- Action Tesa, Century, Kitply

Supply and fixing in repair 18 mm thick UV board duly edge banded with 0.8 mm thick PVC taping for cup board shutters, shall be fixed with autoclosing hydraulic hinges and modular handles, design and colour as approved by GE, suitable for kitchen/ wash basin counter cabinet, etc complete all as specified and directed by Engr in charge (Make : Action tesa/ Kitply/ Archidlan) (Note: Auto close hydraulic Hinges shall be measured & Paid Separtely)

Supply and fix in repair for mild steel galvanised iron telescopic drawer slider 450mm long alongwith sliding wheel conforming to sample kept in GE office complete all as specified and as directed. ( make- Godrej/Quba)

S&F in repair Sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes cappling, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 600mm x 445mmx 210mm, bowl size 500mm x 345mm x 210mm all as specified. Make: Crea, Series- Sila Cat Part No B4721501(pearl finish) or equivalent of make as per Appx 'A' as approved by GE.

Taking down carefully aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall by plastering disturbed surface smooth by applying two coats of same colour paint as existing, floor etc. complete all as specified and as directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including MCBs any type and capacity making good the disturbed surfaces by plastering disturbed surface smooth by applying two coats of same colour paint as existing to match with the existing finishes all as specified.

Taking down the existing unservicable sub main wiring of any type / description as existing at site including making good the disturbed surfaces by plastering disturbed surface smooth by applying two coats of same colour paint as existing to match with the existing finishes all as specified.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with mild steel sunken boxes 1.6 mm thick, 60 mm deep with earth dolly duly, covered with hylem sheet cover 3 mm thick, ISI marked suitable for fixing of switches, fan regulators and sockets including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth with copper lugs complete and connecting to earth dolly complete all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

- Ditto - all as per item No. 72 above but with multistranded copper conductor 2.5 Sq mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLSH cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth with copper lugs complete and connecting to earth dolly.

S & F for Switch piano flush type, single pole, one way, and 5 Amp complete all as specified.

S & F for Switch socket combination, 2 in 1, 3 pin 5 and 15 amp flush type universal as directed.

S & F for Socket outlet multipurpose having provision for 3 pin, 5 Amp and 2 pin, 5 Amp, piano flush type complete all as specified.

S & F ceiling fan regulator socketed, step type, flush type heavy duty, 120 watts suitable to work on 230 volts Ac supply complete all as specified.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with multistranded copper conductor of size 4.0 Sq mm nominal area and drawn through PVC non metallic rigid PVC heavy duty conduit/casing caping as per site requirement and its accessories including one run of PVC insulated 2.5 Sq mm (nominal area) multistranded copper conductor FRLSH cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed.Note:- Two runs of 4 sqmm cable,one run of 2.5 sqmm cable and one run of heavy duty conduit/casing caping as per site requirement and accessories will be measured as one unit

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLSH cable with multistranded copper conductor of size 6.0 Sq. mm nominal area and drawn through PVC non metallic rigid heavy duty conduit/casing caping as per site requirement and its accessories including one run of PVC insulated with 4.0 Sqmm (nominal area) multistranded copper conductor FRLSH cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed.Note:- four runs of 6 sqmm cable,one run of 4 sqmm cable and one run of heavy duty conduit/casing caping as per site requirement will be measured as one unit

S & F for for wall/ceiling mounted LED batten tube 20 watts light fitting, 230 volts with out put of 2000 lumens with extruded aluminium housing with decorative end caps and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20 watts complete all as specified and as directed. Make :- JAQUAR Cat part No LGLZ01X020XN or Halonix Cat part No LL20-281-XXX065-ALI/ PHILIPS

S&F LED street light fitting 25 Watt 230V energy efficient & environment friendly type. The fitting should have powder coated, pressure die cast Aluminium housing and heat resistant toughened glass with frame having better optics for uniform distribution complete all as per Make JAQUAR Cat No LSRTO4S025XC or equivalent of make Bajaj, Philips, Havells as approved.

S & F for MCB DB VTPN 4 way with provision for FP MCB/Isolator/RCCB etc as incommer and SP/TP MCBs as out going double door IP 43 complete prewired including Bus Bar including MCCB 63 Amps 4 pole for incoming etc suitable for operation on 415 volt 50 Hz AC supply including necessary provision for inserting the DBs double door with locking arrangement in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall with existing paint colour complete all as specified and as directed . Make - Schneider/Legrand/L&T/ABB.

S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall with existing paint colour complete all as specified and as directed. Make - Schneider/Legrand/L&T/ABB.

S & F for MCB tripple pole and neutral rated capacity 100 Amps, 415 volts Ics/Icu 100 % breaking capacity 10 KA complete all as specified and as directed. Make - Schneider/Legrand/L&T/ ABB.

S & F for 'C' curve MCB single pole & neutral 240Volts 32/40 Amps.

S&F 'C' curve MCB SP 240 volt 6 to 32 Amp

S & F for plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep with louvers (as per Cat Part No -698502 of Make Indo Asian or equivalent Make- Bajaj Maxima DX/ Usha Crispair )including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) →, ISI marked including removal of old unsv fan and handed over to store yard of AGE E/M (North) complete all as specified and directed. Note : a) Quoted Rate is deemed to inclusive of Stickering/Marking/writing of MES numbers in bottom of ceiling Fan as directed by Engr-in-Charge. Make:- USHA, Heleous,Bajaj, Orient Electric I-Tome, Atomberg Effico Plus.

Excavation in trenches not exc 1.50 Metre wide and not exc 1.50 Metre depth for laying of UG Cable/Pole/Stays etc getting out in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in including Spreading, Leveling, Watering and Well Ramming in layers not exc. 25 Cm thick in Soils, complete all as specified and as directed.

Removing Surplus soil to a distance not exc 50.00 Metre away and depositing where directed at a level not exc 1.50 Metre above the Starting Point, complete all as specified and as directed.

Supply and laying 50mm outer dia, double walled corrugated (DWC) HDPE duct pipe conforming to IS- 14930 Pt-II with antirodent and non flame propogating properties plete with fittings for cable protection complete all as specified and as directed.

Supply, lay, joint, test and commissioning of LT under ground cable 1100 volt grade , XLPE insulated and PVC sheathed heavy duty armoured with aluminium conductor , IS 7098-I Marked, 16 Sq mm 4 Core Laid in trenches/ducts/fixed on poles/walls/laid under roads/paths/drains/culverts or encased in GI pipe including cable glands, lugs jointing material etc complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode of size 60cm X 60 cm X 6 mm buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5 m below the normal ground level connected to GI earth strip 32 X 6 mm dia GI earth lead as earth lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel, protected by GI pipe light grade 40mm bore all as shown on electrical plate No 3 of SSR Part-I connected to earth test point electrode, PCC pit with RCC cover, funnel with wire mesh, watering pipe 20mm dia protection pipe etc and testing on completion complete all as specified and directed. Note No 1 :- The unit rate shall also include for earth work in hard/dense soil, PCC (1:3:6) type C1 chamber, RCC 1:2:4 type B-1 cover 50 mm thick reinforced with 8 mm dia TMT bar @ 150 mm c/c both ways, funnel with watering pipe 20 mm dia medium grade, GI protection pipe light grade 40 mm dia and wire mesh complete. Note No 2 :- Earthing strip and GI protection pipe beyond 7.5 m will be measured and paid separately if required

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

L.T Associate

J P ASSOCIATES

ANIL CONSTRUCTION CO.

Vijay Construction and Company

AJINKYA VIKRAM GAIKWAD

MANIYA CONSTRUCTION CO

Sai Construction

M/s.BAJRANG CONSTRUCTION