REPAIR TO PLASTERING IN SHAFT AREA, , JAFFRI, CHAJJA REPAIR AND PLUMBING, TILING IN ZONE E1 AND E2 AREA UNDER GE(W) MATHURA

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces finished even and fair in CM (1:4) mixed with water proofing compound using 200ml water proofing liquid per bag of 50 Kgs cement complete all as specified and directed. Note :Supply of liquid WPC shall be measured and paid separately.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying a coat of two component elastomeric acrylic polymer modified cementitious water proofing coating, having properties of 80 % elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications and sprinkle sand at 10-15 gram per sqft for better grip with plaster complete all as specified and directed.

M&L for preparing new surfaces of walls and applying two coats of cement base paint , white or tinted including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over chalk whitening preparatory to oil bound distempering complete all as specified and directed.

M&L for rendering 5mm thick on fair faces of brick work or concrete surfaces of ceiling in cement mortar (1:4) complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for rendering dubbing coat over irregular surfaces of chajjas roof projections/ceiling/facia etc average 15mm thick in CM (1:4) over cement slurry coat @ 3Kg/Sqm making the surface even followed by 5mm thick rendering in CM (1:3) furnished even & smooth including making of drip course as required complete including roughening surface of old concrete by picking sweeping clean and washing with water complete all as specified and directed. Note : Rate for form work if required to be included in the quoted rate by the contrator.

Taking down eaves gutters and rain water pipes, soil waste and vent pipe ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning for refixing ( measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.

S&F 100mm sand cast CI pipes soil, waste and vent pipe in any length with or without ears, with cement joints fixed to wall including applying a coat of black japaned paint on outer surface of pipes complete all as specified and directed.

S&F 100mm sand cast CI pipes soil, waste and vent pipe in any length with or without ears, with cement joints laid in floor, trenches complete all as specified and directed.

S&F 100mm CI bends (any radius), diminishing pieces or tapers without oval access door (larger bore measured) complete all as specified and directed.

S&F 100mm CI bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified and directed.

S&F 100mm CI Branch pieces, single T (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F 100mm CI Branch pieces, single T (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed.

M&L for bands, straps, supports or stays for rainwater , Ventilating pipes, including bolts , if required; hooks ( stay), heavy, for large gates; hook and lintle hanges; large hasps and staples ; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters ; knee piece inserts; two way and three ways straps , plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F 75mm CI pipes soil, waste and vent pipe in any length with or without ears, with cement joints fixed to wall including applying a coat of black japaned paint on outer surface of pipes complete all as specified and directed.

S&F 75mm sand cast CI pipes soil, waste and vent pipe in any length with or without ears, with cement joints laid in floor, trenches complete all as specified and directed.

S&F 75mm CI bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 75mm CI bends (any radius), diminishing pieces or tapers (larger bore measured) oval access door complete all as specified and directed.

S&F 75mm CI Branch pieces, single T (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F 75mm CI Branch pieces, single T (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches oval access door complete all as specified and directed.

Cutting holes into or through brick walls built in cement mortar and making good in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required (superficial area n. exc 150 sq cm) complete all as specified and directed.

Taking up or down steel tubing and connections 15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections 20 mm bore complete all as specified and directed.

M&L for 15 mm nominal bore Mild steel galvanised water tubing, medium grade , with all fittings (such as elbow, socket, tee etc) and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L for 20 mm nominal bore Mild steel galvanised water tubing, medium grade , with all fittings (such as elbow, socket, tee etc) and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair 100mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repair 125mm Anodised aluminium anodised barrel tower bolt of extrude section and fixed complete all as specified and directed.

S&F in repair 200mm Anodised aluminium anodised barrel tower bolt of extrude section and fixed complete all as specified and directed.

S&F in repair 250 mm aluminium alloy, anodised sliding door bolts with hasp, staple and fixing clips of sheet, cast or extructed section and fixing bollts and sliding bolts of extruded section or cast aluminium ally and fixed complete all as specified and directed.

S&F in repair anodised aluminium 125mm handles, cast type complete all as specified and directed.

S&F in repair for 15mm bib tap standard of PTMT any colour screwed for iron pipe and fixed, complete all as specified and directed. (minimum weight 90 gm).

S&F in repairs 15 mm size stop cock of PTMT in any colour screwed for iron pipe and weight not less than 90 gram per cock complete all as specified and directed.

S&F float valve of 20 mm dia ball brass valves (minimum weight 350gm), high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair 15mm bore chromium plated bib tap cast copper alloy fancy type (min weight 400 gm) screwed down, screwed for iron pipe or for brass ferrule and fix complete all as specified and directed.

S&F Pillar taps cast copper alloy, fancy type (minimum weight 350gm) with capstan head, CP, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore, supplied and fixed in repairs, complete all as specified and directed.

S&F in repair 2 way 15mm bib cock cast copper alloy fancy type (min weight 350 gm) screwed down, screwed for iron pipe or for brass ferrule and fix complete all as specified and directed.

S&F in repair CP angle / stop cock fancy type chromium plated 15 mm bore (minimum weight 350gm) screwed down, high pressure screwed both ends for iron pipe or for unions complete all as directed. .

S&F in repair CP Jet spary butter fly design fixed on EWC with stanless screw as approve complete all as specified and directed.

S&F in repair CP Health faucet with stand fixed on wall in CP hose pipe 1 mtr length and stainless steel screw as approve complete all as specified and directed.

S&F PVC waste pipe 32mm dia of length 0.8mm to 0.9mm fixed complete all as specified and directed.

S&F in repair stainless steel kitchen sink 1 mm thick kitchen/laboratories with plug washer and waste including bedding in cement mortar and fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repair stainless steel kitchen sink 1 mm thick with drainage board kitchen/laboratories with plug washer and waste including bedding in cement mortar and fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repair vitreous china wash down, water closet pan (pedrestal pattern), white including fixing bolts and connection to flush pipe and drain out going pipe and closet seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in panes n.exc. 0.5 sqm each pane including hacking out old glass panes complete all as specified and directed.

S&F in repair for stainess steel wire cloth 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed complete all as specified and directed.

S&F in repair door closer hydraulically regulated designation No. 3 universal type cast iron body suitable for door shutters of 851 to 1000mm in width of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repair fancy curtain rod mild steel chromium plated 25mm dia with bracket knobs, CP rings @ 10cm c/c etc including end cap for curtain rod complete all as specified and directed.

S&F in repairs towel rail chromium plated 20mm dia ‘D’ type, 600mm long, complete all as specified and directed.

S&F in repair PVC cover for PVC Water tank 500/750/1000ltr capacity with self locking arrangement, complete all as specified and directed.

S&F in repair PVC Syphon kit assembly in existing flushtank, complete all as specified and directed.

S&F in repair PVC mirror cabinet size 300X450mm of standard size fixed to wall with PVC sleeves and steel screws complete all as specified and directed.

S&F in repair Glass shelf 450mm long X 100 mm wide including brackets fixed to wall with sleeves and screws complete all as specified and directed.

S&F in repair Corner Glass shelf assembly of size 300mm x 300mm including bracket fixed to wall with PVC slips and stainless steel screw complete all as specified and directed.

S&F 65mm size brass 4 lever mortice lock, vertical type fixed in repairs, complete all as specified and directed.

S&F 75mm size brass 4 lever mortice lock, vertical type fixed in repairs, complete all as specified and directed.

S&F in replacement looking mirror 700x500mm, 5mm thick glass mirror with double coat of protection and longevity grounded edges for safetya and silvar plating on the back for better reflection, complete all as specified and directed.

S&F stainless steel plate rack of size 750 x 600 x 300mm made out of 0.80mm thick stainless steel of first quality complete all as specified and directed.

S&F in repair PVC valve less syphonic action type flushing cistern low level white 10 liters with inlet ball valve float and handle including CI brackets complete all as specified.

S&F Vitreous china wash basin white flat back size 550 x 400mm size, including cutting for and pinning in ends of brackets or erecting stand but inclusive of fixing of supply and waste fitting & waste pipe 32mm bore complete fixed complete all as specified and directed.

S&F 32mm Waste fittings, brass, chromium plated for basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Demolition of cement concrete ( unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level complete all as specified and directed.

M&L for Plain cement concrete type B1 (1:2:4), using 20 mm graded crushed stone aggregate,40 mm thick , as in floor and finished even and smooth using extra cement laid in alternate bay and joints filled with and including bituminous compound grade 'A' complete all as specified and directed.

Demolition of brick work or stone/boulders masonary, built in cement mortor including all quoins, arches pillars, etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' old size brick straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

M&L for precast RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in manhole cover slab with plain fair faces and set in cement mortar (1:4) and surface embossed the date of casting of slab complete all as specified and directed.

M&L for TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for in repair SGSW gully traps square or round mouthed type P of size 180 x 150mm complete all as specified and directed.

M&L for cutting chases, pining in making good to facing where required and pointed in CM (1:3) to ends or edges of landing , steps cills, sun shade, shelves etc and cutting chases for concealed conduit wiring etc and making good , match with existing surfaces by applying white/colour wash cutting not exc 10cm girth complete all as specified and directed.

M&L for 35mm thick (measured solid) precast cement concrete louvers and jallies type B-0 mix (1:2:4) (using 12.5mm graded stone aggregates) including all mouldings but excluding frame set in CM (1:4) complete all as specified and directed.

Dismantling floor, hearth or wall tiles including cement mortar bedding any size etc complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (Square/Rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.36 sqm in floors etc set and jointed in neat coment slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in cement and sand mortar (1:6) complete all as specified and as directed.

All as per item No 76.00 (here-in-before) abvoe but as in skirting over 10mm thick backing coat in CM (1:3) complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for glazed ceramic tiles 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to the match tiles on vertical surface over and including 10mm thick plaster in CM (1:3) complete all as specified and as directed.

Wornout existing treatment from sunken portion of WC /Bath/Kitchen/Passage including taking down floor tiles, plaster, lime/cement concrete, WC trap complete empty of existing sunk complete all as specified and directed. Note :Taking down of plumbing & sanitary fixing & fixture shall be measured under relevant items

M&L for Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sunken part of slab complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces finished fair and even in CM (1:4) mixed with liquid water proofing compound complete all as specified and directed. Note:- Liquid WPC shall be measured and paid saperately.

M&L for water proofing treatment with APP modified bituminous membrane 3mm thick consisting of the following for RCC roof :- (a) Cleaning palstered roof surfaces and applying a coat of oxidised bitumen based solvented primer a@ 0.3Kg /Sqm of approved make on top of dry surface of RCC roof complete all as specified and directed. (b) M&L for APP modified polymeric water proofing membrance 3mm thick weight not less than 3.0 Kg/Sqm with non woven polyster core of approved make applied by heating one surface of membrane with LPG torch with lap of 100mm and the overlap shall be sealed by flame complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC flush pipe complete including jointing to socket of flushing rim, complete all as specified and directed.

S&F GI tubes medium grade, laid on sunken floor as on spout pipe 50mm bore complete all as specified and directed.

S&F in repair 110mm bore PVC SWR bends of any radius with access door complete all as specified and directed.

S&F in repair 75mm bore PVC SWR bends of any radius with access door complete all as specified and directed.

S&F in repair 110mm bore SWR junction, single T equal or unequal with access door complete all as specified and directed.

S&F in repair 75mm bore SWR junction, single T equal or unequal without access door complete all as specified and directed.

S&F 110mm bore PVC SWR soil waste pipes single socketed in any length with rubber ring joint fixed to walls with clamp including dismantling of any type pipe complete all as specified and directed.

S&F 75mm bore PVC SWR soil waste pipes single socketed in any length with rubber ring joint fixed to walls with clamp including dismantling of any type pipe complete all as specified and directed.

S&F in replacement 18mm thick PVC Celuka Ply plain white colour both side fixed with screws solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per specifications and as directed by the Engineer-in-Charge (Density - 575 to 600 Kg/CBM)

S&F in replacement 18mm thick Celuka Ply of Single Side Prelam/Rigidlam color fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per specifications and as directed by the Engineer-in-Charge (Density - 575 to 600 Kg/CBM)

S&F 12mm thick celuka ply of plain white (Matt finish) color fixed with screw, solvent cement/adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per directed by the Engineer-in-Charge (Density - 575 to 600 Kg/CBM)

S&F auto closing hinges 35mm of 0 crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and directed.

S&F ball bearing runners 45mm telescopic (KTS-20) full extension load capacity 50 Kgs complete all as specified and directed..

Taking down UPVC door/window of size not exc 1.5 Sqm ,any description and refixing in the same opening after tightening , oiling, easing/change the section as required , including fitting such as rubber packing , handles, lock, springs, hinges etc complete all as specified and directed.

Taking down UPVC door/window of size exc 1.5 Sqm but not exc 4.0 Sqm ,any description and refixing in the same opening after tightening , oiling, easing/change the section as required , including fitting such as rubber packing , handles, lock, springs, hinges etc complete all as specified and directed.

M/S MRS BHASKAR

mh enterprises

SHAKSHI ENTERPRISES

M/s Hoti Lal Contractor