PROVISION OF NEW WASHROOM IN BLDG NO P08 AND RELOCATION OF JUNCTION BOXES IN AIR TECHNICAL HANGER ATH AND AS AND AS TO WASHROOM IN T5 BUILDING AT INS RAJALI ARAKKONAM

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and as directed.

M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

Hardcore of gauge not exc 63mm broken stone or boulders deposited spread and levelled in layers not exc 15cms thick, watered and rammed to a true surface broken stone or boulders complete all as specified and as directed by Engr-in-charge.

Material and labour for cement concrete type D-2, 1:4:8 , (Using 40mm graded stone aggregates) for foundation filling and mas concrete complete all as specified and as directed by Engr-in-charge.

M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 one brick thick complete all as specified and as directed.

M& L for Walling of random rubble, uncoursed, well bounded ,bedded and solidly hearted and built in cm 1:6 complete all as specified and as directed by engr-in-charge.

Material and labour for cement concrete type -2, 1:3:6 (Using 40mm graded stone aggregates) for surface channel or drains complete all as specified and as directed by Engr-in-charge.

M&L for Reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and as directed by engr-in-charge.

Material and labour for cement concrete type D-2, 1:4:8 (Using 40mm graded stone aggregates) for floors finishes complete all as specified and as directed by Engr-in-charge.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise

Material and labour for cement concrete type B-0,1:2:4, 25mm thick (Using 12.5 mm graded stone aggregates) for floors finishes complete all as specified and as directed by Engr-in-charge.

M&L for 15 mm thick screed bed or bedding in cement mortor 1:4 for receiving tile etc complete all as specified and directed by engr-in-charge.

Material and labour for joint free non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.06sqm but not exc 0.11 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement fo match, complete all as specified and as directed by Engr-in-charge.

Material and labour for 10mm thick backing coat in CM 1:3 for vertical surface tiling complete all as specified and as directed by Engr-in-charge.

Material and labour for glazed ceramic tiles in vertical surface 450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engr-in-charge.

Taking down cement plaster on brick walls including raking out joints, hacking for key, scrubbing down with water, etc.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces with cement plaster 1:6, finished even and smooth (without using extra lime or cement).Complete all as specified and as directed by engr-in-charge.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in two layers 10mm thick in CM 1:4 followed by 5mm thick CM 1:4 with approved WPC, finished even and fair.

M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces with cement plaster 1:3, finished even and smooth (without using extra lime or cement) on ceiling.

Material and labour for prepration of newly vertical surface applying three coats of white wash complete all as specified and as directed by Engr-in-charge.

M & L for preparation of newly plastered surfaces of ceiling applying Three coats of White Wash complete all as specifled and directed

M&L for two coat of cement base paint over a coat of primer including preparation of new surface etc complete all as specified by engr-in-charge

Demolition of cement concrete of any description and in any position not otherwise specifically provided for as in sunken floor and removal & rubbish of premises exc 500 m but n exc 1.5 km complete all as specified

M&L precast cement concrete louvres and jallies type B0 1:2:4 (12.5mm graded aggregate), 60mm thick (measured solid), including all mould- ings but excluding frame set in cement mortar 1:4

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removal & rubbish of premises exc 500 m but n exc 1.5 km complete all as specified

Taking down of Chowkhats or frames(any type) exc 1.5 sq. m but n exc 4 sq. m each (without taking off shutters from the frames).

S&F Second class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed.

M&L for plain, framed, panelled shutters (40mm thick) (any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats.

Material and labour for two coats of synthetic enamel paint over one coat of red oxide priming including preparation of new steel surfaces over 10 cm in width or girth, not otherwise described complete all as specified and as directed by Engr-in-charge.

S&F 35mm thick second class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated.

M&L Surfaces of any description, not otherwise descri-bed, over 10cm width, preparation of new wooden surface and two coats of synthetic enamel (ordinary tint) over a coat of pink primer.

M&L 100m Butt hinges,medium weight, cold rolled mild steel, and fixed

M&L 100mm Extruded aluminium alloy handles, fabricated type, anodised

M&L 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed

M&L 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F hold fasts and similar small articles conforming to Fe-290 Gde-E-165

Cutting holes not exc half brick in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube and edges will be painted to match with printed sheet fixing in opending as per specification and drawing etc complete all as specified and as directed by engineer-in-charge.

S&F Factory made solid panel PVC door shutter 30mm (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded wood grain printed PVC sheet used 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90o) used instead of exposed portion of PVC sheet beading panelling of wood grain printed PVC sheets to be fitted in the MS frame welded sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supling & fixing in the frame at the site as per specification and drawing shown in SSR Pt-I all as directed.

Taking down of wooden window frame and venitlator not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)

S&F Anodised aluminium frame with Powder Coating (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F powder coated Anodised aluminium window and ventilator shutters, sliding type, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified complete all as specified.

S&F Sheet glass, 4.0 mm thick ordinary quality and glazing with rubber gasket in square n exc 0.5 sq. m in each pane

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples

S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers

Taking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to store.

Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth

S&F 25mm dia UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe with all fittings complete all as specified and as directed by Engr-in-charge.

S&F 20mm dia UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe with all fittings complete all as specified and as directed by Engr-in-charge.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories).

S&F 110mm PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls.

S&F 75mm PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls.

S&F 110mm PVC (SWR) bends any radius with access door.

S&F 110mm PVC (SWR) branch piece, single (single Y) equal or unequal with access door.

S&F 75mm PVC (SWR) branch piece, single (single Y) equal or unequal with access door.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door.

Supply and fix Repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps waste chain and plug and porcelain stopper but including brackets waste fitting brass chromium plated 32mm dia with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed etc complete all as specified and as directed by Engr-in-charge.

Supply and fix Repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (including flushing cistern and ) including Flush pipe of chromium plated brass tube,32mm dia, for low level cistern Flush pipes to pedestal pan, including all joints

S&F Vitreous China wash down water closet pan (pedestal pattern) with Seat and cover for pedestal pan , including valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polythene of low or high density or pvc 32 mm dia,for low levwl cister Flush pipes to pedestal pan, including all joints complete all as specified and directed by engr-in- charge

S&F in pillar tap(fancy type) cast copper alloy 15mm bore screwed down high pressure chromium plated screwed for iron pipe or for brass ferrule and fixed complete all as specified.

S&F CP Bib tap high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm?125gms). Fixing in 15 mm pipe

S&F in repairs Vitreous China urinals, half self type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe

S&F doom gratings of ptmt 125 mm dia with waste hole minimum weight 40 gm

S&F CP Angle stop valve (fancy type)of pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms)32 mm dia Complete all as specified

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complte all as specified and directed

Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions includind Anodised aluminium snap grid frame work for false ceiling with the help of hangers 6 mm dia (up to 1200 mm length) adjustment level fixed to roof with two coat of oil bound distamper over a coat of primer including applying 2 coat of altek putties complete all as specified and directed.

M & L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Removing building materials etc. to a distance of 1.5Km, beyond the lead included in the rates, including loading, unloading and stacking at the destination

Supply and fix for structural steel works as in tubular roof trusses, purlins, vertical posts, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, tubular pipe, channel or flat sections) including distance pieces, cleats, MS plate, riveting including bending and welding, conforming to Fe–410W Gde E-250 quality A complete all as specified and as directed by Engr-in-charge.

Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe–410W Gde E-250 a quality

Supply and fix for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nuts, not exc 5cm long with diameter of shank of 16 to 20mm complete all as specified and as directed by Engr-in-charge.

S & F wind ties for roof including securing bolts, posts and struts, including cutting tops to shape as directed, drilling holes, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165

S & F wall mounted stainless stell 304 quality hand wash sink rectangle type with silver polished including counter top edge with an offset to guard against drips and over flow and 200 mm backsplask size maximum 2.00x.0.3x0.450 mtr and mounted with four pilar tap. complete all as specified and directed by engr-in-charge

Terrace Waterproofing-Preparation, Provision and applying polyurethane waterproofing membrane coating system comprising the followings : (a) Cleaning mechanically the surface clean and free from any bituminous residue, dirt, oil, grease, undulations, troughs etc.. including surface cracks etc filled with pre-packed cementitious Grout, all surface patchwork, defects etc. to be repaired with high performance rapid setting, high early strength, shrinkage compensated repair concrete, all complete as per the manufacturers specification. (b) Providing & applying PU Primer @ 200 ml per sqm and then applying two coats of two component, moisture cure highly elastomeric & tough polyurethane waterproofing membrane of PU @ 1.5 kg per sqm in two coats to achieve dry film thickness of 1.07 mm having tensile strength >6MPa & elongation of 600% providing unmatched crack bridging abilities and solid content of 98%., complete all as per the manufacturers specification. (c) On completion of waterproofing application, providing and fix 200gsm non woven Polypropylene geo textile membrane with over lap of minimum 50mm as protective medium before screed concrete or landscaping works Make: Nitoproof 650 PU of FOSROC , SIKA, STP, BOSTIK, STP, Asian Paints,...

M&L for cement concrete B-0, 1:2:4 (12.5mm graded aggregate) of 40mm with water proofing liquid on the cured waterproofing membrane to protect the waterproofing coating system from any damage complete all as specified and all as directed (Note: WPC shall be measured and paid separately) Make WPC: Conplast WL Xtra of Fosroc

M&L for RCC (Nominal mix) in type B-0, 1:2:4 (12.5 graded aggregate) as in beams, Vantilever, bresummers, lintels, over apan 1.5 mtr complete all as specified and as directed by Engg-in Charge.

M&L for RCC(nominial mix) in Type B-0,1:2:4 ( 12.5 graded aggregate ) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies , deck slabs and in shelves complete all specifeild and as by Engr-in-charge

M&l for PCC in cover slabs type B-1 1:2:4 using (20 mm graded aggregate) (for man holes etc..) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face complete all as specifeid and directed by Engr-in-charge

Material and labour for TMT steel bars 10mm dia and over, cut to length, bent to shape requoed, including cracking, bending spirally for colunms, slabs hooking ends and binding with and including mild steel wire (annealed) not less than 0.9m all as specifeid and directed by Engr-in-charge

Material and labour fpr TMT stell bars 6 to 8 mm dia and over , cut to length, bent to shape requied, including cracking, bending spirally for hoping for hooping for colunms, slabs hooking ends and binding with and including mild stell wire (annealed)not less than 0.9mm dia or securing with clips and complete all as specifeid and directed by Engr-in-charge

S&Ffor PVC connection 32mm dia 600 mm long of PTMT complete all as specified and as directed for Engr-in-charge

S&F for waste coupling of PTMT (half or full threaded) . (minimum weight 32mm 45gms/40mm-60 complete as specified and as directed by Engr-in-charge

S&F for flood trap(75mm),plain with grating including jointing with solvent cement coplete all specified and as directed by Engr-in-charge

M & L for Brickwork with subclass 'B' bricks, straight or curved on plan to any radius built in half brick thick wall CM 1:3 complete all as specified and as directed by Engr-in-charge

M&L for RCC M-30 Design mix as in foundation including rafts, footings, foundation beam etc and mass concrete.

M&L for providing Reinforced cement concrete M-30 (design mix)(20mm graded aggregates) as in Columns, pillars, piers, posts and struts .

M&L for RCC M-30 Design mix as in Beams, cantilevers, bressummers, lintels over 1.5m span.

M&L for RCC M-30 Design mix as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

M&L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide

M&L 10mm thick plastering on wall concrete surfaces in cm (1:6) even and smooth with out using extra cement .

M&L 15mm thick in two leyer rendering in CM 1:4 on external surface of wall, finished the surface even and fairw ith using wpc. ( wpc shall be measured seperetely)

Material and labour for rendering 5 mm thick in cement mortar 1:3 as in ceiling surfaces, finished fair and evenwithout using extra cement complete all as specified.

M&L for Three coats of White wash over a coat of chalk whitening primer on newly plasterd wall including preparation of surfaces complete all as specified.

M&L for Two coats of White wash over a coat of chalk whitening primer on newly plasterd Ceiling including preparation of surfaces complete all as specified.

M&L preparing new surface on walls and applying 2 coats of cement paint over one coat of primer on external walls.

Supply only Liquid water proofing compound.

Returning/filling in trenches in layer n'exc 15 cm thick including watering well ramming etc.

Removing excavated soil to distance n'exc 50 mtr and deposited as directed by Engr-in-Charge.

S&F powder coated anodised aluminium ventilator with fixed aluminium frame of size 65 x 40 x 1.98 mm thick or equivalent section fixed in vertical position with aluminium vertical members and half portion to be provided with 4 mm thick pinhead glass and remaining portion to be louvered using 4 mm thick pinhead glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm incl necessary channel frame work, including rubber gasket and aluminium beading including taking down old ventilator in any size and makecomplete all as specified Note : rates shall include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading etc

S&F powder coated anodised Aluminium alloy sections 3 tier track sliding windows seires B weight of section frame 1.248Kg/Rm and shutter section weight 0.547Kg/Rm Jindal or equivalent duly fitted with neoprene beading, glazing clips, tinted glass panes 4.80/5.0mm nominal thickness, Aluminium wire cloth 0.45mm dia and average width of aperture 1.4mm, aluminium alloy handles etc. complete all as specified and directed. Note : Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc

M&L for Joint free coloured Non-skid Ceramic tiles 7 to 8 mm thick in floors, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm set & jointed in neat cement slurry and pointed in white or coloured cement and incl 15 mm thick screed bed or bedding layers of cement mortar 1:4 to match Shade, pattern, laying etc of tiles as directed at site to match complete all as specified & directed.

Material and labour Glazed ceramic coloured (Desiner) tiles 450X300X7mm thick,laid in pattern decided by Engr-in-charge, as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendering in cement mortar (1:3) complete all as specified.

S&F Butt hinges, 75mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed 150mm

S&F Aluminium handle cast type anodised 150 mm size

Supply and Laying of 20mm outer dia CPVC pipes SDR 11 and fittings , concealed joint with CPVC adhesive taflon tape complete to walls and ceilings or laid in floors including all connected brass CPVC fittings and cutting grooves , filled with cm 1:6 complete all as specified and directed by Engineer-in-charge

Supply and Laying of 25mm outer dia CPVC pipes SDR 11 and fittings , concealed joint with CPVC adhesive taflon tape complete to walls and ceilings or laid in floors including all connected brass CPVC fittings and cutting grooves , filled with cm 1:6 complete all as specified and directed by Engineer-in-charge

Supplied and fixed water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap 100mm dia front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) .

Supply and fix in coloured vitreous china wash down water closet pan (pedestal pattern) including Vitreous China valveless,syphonic action type, coloured flushing cistern, 10 litre capacity, low level with inlet, ball valve,float and handle including bracket, flush pipe of polyethylene of low or high density of PVC 32 mm dia,for low level cisterns and Plastic water closet seat,black,closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device including jet spray complete all as specified.

S&F Vitreous china urinal half stall type, white with grating and union for discharge pipe incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement ; fixing automatic flushing cistern with brackets, flush pipe, waste pipe, pvc connection grating and union for discharge pipe complete all as specified ad as directed.

S&F urinal spreader of PTMT any colour for fixing with 15 mm bore pipe (minimum weight 60gms) complete all as specified and as directed.

S&F Vitreous china urinal partition white of size 310x700 mm terminating about 40cm above floor line .

S&F PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, low level with inlet, ball valve, float and handle including brackets incl PVC connection with CP brass nuts on both sides complete all as specified .

S&F in 15 mm dia bib tap (fancy type cromium plated) cast copper alloy with crtuch or butter fly handle screwed down for iron pipes or for brass ferrule and fixed complete all as specified.

Supplied and fixed 15mm dia Stop valves/cock concealed type, cast copper alloy fancy type, chromium plated,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for UPVC or for unions complete all as specified.

Supply and fix vitreous china wash hand basin white flat back size 550x400mm excluding taps waste chain and plug and porcelain stopper but including brackets waste fitting brass chromium plated 32mm dia with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed etc complete all as specified and as directed by Engr-in-charge.

S&F 32 brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary picking , union and cap,cutting holes, connecting pipes and fixed all as specified and directed.

S&F in Brass CP towel rail 20mm dia `D' type 60 cm long between flanges including all fitting of screws etc.

S&F PVC connections 15mm size with PTMT nuts of length 450 mm

Supply & fixed rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, ISI marked, triple layered, marked embosed, hoisted and fixed in position including all fitting connecting up pipes complete.

Supply and fix 20 mm dia ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F Salt-glazed stoneware drain pipes 150mm dia laid in trenches and jointed as specified

S&F Concrete bed to drain pipes 150mm dia including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete type C2 1:3:6

Material and labour for cement concrete 1:3:6 type C1(using 20mm graded stone aggregate) as in coping including necessary form work complete all as specified and as directed.

S&F Gun-metal, globe or gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed

S&F 110mm PVC (SWR) WC connector bent type

PVC (SWR) 110mm pipes, single socketed, in any length with rubber ring joints laid in floors or trenches or wall complete all as specified

PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixing of 75 mm bore laided in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) bends 110mm bore any radius

S&F PVC (SWR) bends 75mm bore any radius

Material and labour for providing precast cement concrete as in cover slabs for manholes and similar items with plain faces in cement concrete mix 1:2:4 type B1 (using 20mm aggregate crushed stone aggregate) and setting set in cement mortar 1:4 including necessary form work complete all as specified and as directed.

Material and labour for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as benching of manhole, etc complete all as specified and as directed.

M&L Cement concrete type B-1, 1:2:4 (12.50mm graded aggregate) 25mm thick in flooring and even and to receive tiles

M & L 75 mm thick PCC 1:3:6 type C-2 using 40mm graded aggregate as in plinth protection/footpath finished the surface even and smooth without using extra cement.

Forming Contration (Dummy) joints 30 mm deep x 10 mm wide, filled with sealing compound (1 part of bitument and 3 part of sand)

S&F in Health Faucet with 1.50mtr tube & Hook any description including flexible attachment complete all as specified and directed by Engr-in-charge.

Providing and applying polyurethane waterproofing membrane coating system comprising the followings : (a) Removal of existing bituminous memberan and mechanically cleaning of surface clean and free from any bituminous residue/Plaster , dirt, oil, grease etc.. including all surface cracks etc filled with Bostik Flowfill Grout, all surface patchwork, defects etc. to be repaired with high early strength, fast setting repair mortar using Bostik Patchfix concrete, all complete as per the manufacturers specification. ( b) Providing & applying Bostik Ultraseal PU Primer @ 200 ml per sqm and then applying two coats of single component, moisture cure highly elastomeric & tough polyurethane waterproofing membrane of Bostik Ultraseal PU @ 1.5 kg per sqm in two coats to achieve dry film thickness of 1.07mm having tensile strength > 6MPa & elongation of 600% providing unmatched crack binding abilities and solid content of 98% complete all as per the manufacturers specification.(c) On completion of waterproofing application providing and fixing 200gsm non woven polpropylene geo textile memberane with overlap of minimum 50mm as protective medium before screed bed concrete of land scaping works (make : Nitoproof 650PU of FOSROC ,SIKA, STP, ASIAN PAINTS)

M&L for providing cement concrete B0 1:2:4 (12.5mm graded aggregate) and 50mm thickness admixed with Bostik LW @ 200ml per bag 50Kg cement as per manufacture instruction as the make approved by GE , on the cured waterproofing memberance to protect the waterproofing coating system from any damge . Complete all as specified and directed by Engineer-in-charge.

S&F Wall mounted 500ml Soap dispenser for rubber maid flex refilling type complete all as specified and as directed.

S& F joist,channels,angles , Box section,flat irons, or T section fixed independently ,with out coonecting plates etc including all necessary nut and bolts in Fe 410-w (Gde E-250) Quality A

S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Surface excavation n. exc. (not exceeding 30 cm deep and avg 15 cm deep) and getting out in sof/loose soil complete all as specified and directed.

M&L sand cushing/filling under paver block as specified and directed.

S&F Machine pressed precast Concrete interlocking paver block any shape and size with grey/colour cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 grade all as specified and directed.

Providing, cement concrete in kerbs type B1, 1:2:4 (20mm rounded or chamfered on edges graded aggregate) having rounded or chamfered on edges including,excavation & necessary formwork complete all as specified and directed.

Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm bore drain pipe.

Taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixtures, PVC conduits and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials from wall/ceiling etc to store for keeping in safe custody or for taking credit and making good disturbed surfaces of wall, floors, etc. all as specified and as directed.

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed FRLS multi-stranded copper conductor PVC insulated cable 1100 volts grade single core drawn into and including non metallic rigid PVC conduit of 20 mm dia concealed wiring through Wall/Ceiling/Flore along with FRLS 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly and including 2 mm thick terminal boxes MS sheet flush mounted with 3 mm thick laminated hylem sheet fixed with camium plated iron screws for mountling switches, socket, fan regulators etc complete for One Light/Fan point controlled by one switch. and making good disturbed surfaces matching with existing paint complete all as specified and as directed. Make of PVC copper conductor cable:- Finlex/Poly cab/ Asian. Make of PVC conduit /casing/capping : Avon plast/ Kon seal / Garware.

Supply and fix high efficiency Wall mounted LED light fitting 4 feet white, 20W, integrated LED driver etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old one and taken as credit complete all as specified and as directed. (Make:- Philps Cat Part No. BN021C LED20S PSU CDL GR or or Equivalent in Panasonic, C&S, Havells)

S&F Ceiling rose three terminals/ PVC/ polycarbonate, isolated body complete all as specified and as directed by Engr-in-Charge Make: Anchor/ABB/Leader

S&F for Switch piano, flush type single pole , one way 5 amp as specified and as directed by Engr-in-Charge .Make: Anchor/Cona/Leader

Taking down old unserrviceable Ceiling Fan/ Wall Fan/Exhaust Fan, remove the connected wires,dismantle the blade and deposite to MES store all as directed by Engr-in-Charge

Supply and fix Exhaust fan, steel body AC single Phase. 230V of size 300m sweep heavy duty with, blades, and frame and louvers all as directed Make: Havells turbo force SP or equivalent in Khaitan/Almonard

S&F sheet metal enclosure VTPN MCCB DB 12 way double door with spreader terminals,insulating phase barrier and hardware, having IP 43 and IK 09 protection with neccesary arrangements Including taking down old u/s DB, MCCB and MCB's all as specified and directed Note :- (i) Including taking down old u/s DB and MCCB. Make: Legrand/Siemens/Scheneider/ABB.

Supply and fix for MCCB 4 Pole, 415 V,adjustable Thermal & Fixed Magnetic setting type type 100 Amps with breaking capacity 26 KA complete all as specified and as directed by Engr-in-charge.Make: Siemens/Scheneider/ABB, Note : Including taking down old unserviceable.

Supply and fix for MCB TP 415 V, 25-63 Amps with breaking capacity 10KA C curve complete all as specified and as directed by Engr-in-chargeMake: Siemens/Scheneider/ABB Note : Including taking down old unserviceable.

Supply and fix for MCB SP 230 V, 6-32 Amps with breaking capacity 10KA C curve complete all as specified and as directed by Engr-in-chargeMake: Siemens/Scheneider/ABB Note : Including taking down old unserviceable.

Material and labour for Earthing complete with GI earth plate electrode of size 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below ground level , with top edge of the earth plate at a depth of not less than 1.5 mtr below ground level connected with and incl GI wire earth 4 mm dia including alternate 5 layers of charcoal (250 Kg) & salt crystal (200Kg )and top two inches layers with Back filling compound (100 Kg) including 15 mm dia GI pipe light grade by means of nuts, bolts, washers and necessary earth work upto 7.5 mtr and connecting to test point, LT Switchgear etc as per site requirement including necessary excavation, earth work in any type of soil, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC Cover with 6 mm dia MS bars 10 cm C/C on both ways as reinforcement complete all as shown in elecrical plate No 3 of SSR Pt- I including testing on completion complete all as specified and as directed. Notes:-The rates quoted is inclusive of galvanised earth lead strip 25x4mm conductor upto a length of 7.5m from the earth pit, necessary earth work PCC chamber, RCC cover, reinforcement, removal of surplus soil , site clearance etc. .

M&L Cable jointing kit for 11100 V (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3,5 core XLPE armoured aluminium conductor cable of size 95 sqmm

M&L Cable jointing kit for 11100 V (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3,5 core XLPE armoured aluminium conductor cable of size 35 sqmm

Supply and lay Cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded Aluminium conductor of size 95 sq mm 3.5 core.

Supply and lay Cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded Aluminium conductor of size 35 sq mm 3.5 core.

M&L for shifting wall mounted LT Panel to new location and connect with new cables including two coat of aluminium painting of old disturbed surface

Material and labour for Earthing complete with GI earth plate electrode of size 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below ground level , with top edge of the earth plate at a depth of not less than 1.5 mtr below ground level connected with and incl GI strip earth 25 x 4 mm size including alternate 5 layers of charcoal (250 Kg) & salt crystal (200Kg )and top two inches layers with Back filling compound (100 Kg) including 15 mm dia GI pipe light grade by means of nuts, bolts, washers and necessary earth work upto 7.5 mtr and connecting to test point, LT Switchgear etc as per site requirement including necessary excavation, earth work in any type of soil, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC Cover with 6 mm dia MS bars 10 cm C/C on both ways as reinforcement complete all as shown in elecrical plate No 3 of SSR Pt- I including testing on completion complete all as specified and as directed. Notes:-The rates quoted is inclusive of galvanised earth lead strip 25x4mm conductor upto a length of 7.5m from the earth pit, necessary earth work PCC chamber, RCC cover, reinforcement, removal of surplus soil , site clearance etc. .

SIVA ENTERPRISES (BID ID -3140251)