SITC of GLF system works at Darbhanga Airport

Supply of FAA/ICAO/DGCA-CAR Compliant Inset type LED Uni directional Stop Bar (RED) light fitting suitable for straight section/straight section (off set) / curved section for aviation visual aids requirements complete with shallow base and matching body of the fitting, inner body and outer cover made of die cast aluminium complete with LED lamp with integral driver and electronics suitable for 6.6 amps current with connected heat resistant accessories, prism assembly, optical assembly, "O" ring seal, pressure relief test plug, hardware, red prism / lenses and all standard accessories and ready for site installation complete as required as per sepcifications.

Supply of FAA/ICAO/DGCA-CAR Compliant high intensity Elevated LED Runway guard light with two flashing light fixtures with black independent visors, 6.6A Current driven input power supply, LED lamps/module , flashing rates 45-50 Per Minute, frangible support, high strength base plate for runway guard light to resist wind speed (300 mph) gaskets, SS hardware etc as per sepcifications complete as required as per sepcifications.

Supply of FAA/ICAO/DGCA-CAR Compliant elevated type Omni-directional Blue colour, medium intensity LED type Taxiway Edge Light fitting suitable for Taxiway, Apron Edge Lights, Turning Pad Lights suitable for operation at 6.6 Amps, series circuit supply, complete with Omni-directional, Lens clamping mechanism, breakable coupling, gasket, two pin secondary leads, base plate with SS Hardware and other accessories including integrated encapsulated electronic module complete as required as per sepcifications.

Supply of FAA/ICAO/DGCA-CAR Compliant LED type inset omnidirectional Blue colour light fitting for aviation visual aid at taxiway edge, apron edge, turning pad lights complete with LED and integral driver and electronics suitable for 6.6 Amps, lenses / prism, filters , lense protection ring , shallow base, matching body, single plug, inner & outer cover, two pin secondary leads complete with other accessories, ready for site installation on existing housing boxes etc. in conformity with ICAO/DGCA-CAR, complete as required as per specifications. complete as required as per sepcifications.

Supply of 2C x 2.5 sqmm secondary lead made out of multi stranded copper conductor EPR insulated & PCP sheathed, anti-termite & anti rodent treated 600 V grade AGL cable as specified in particular complete as required as per specifications.

Supply of 1C x 6 sq.mm, 5 KV grade, AFL cable, stranded copper conductor, XLPE insulated PE sheathed, anti-termite & anti rodent treated Airfield Ground Lighting series cable generally confirming to IS 7098 as ammended up to date in conformity with ICAO/DGCA-CAR, complete as required as per specifications.

Supply of 6 sqmm, 5 KV grade plug and receptacle of type I, class 'B' connector suitable for field attachment with 5 KV grade XLPE insulated, PE sheathed, copper conductor cable in conformity with ICAO/DGCA-CAR, complete as required as per specifications.

Supply 2 pin plug and recepetacles suitable for 2 x 2.5 Sq mm copper conductor secondary lead in conformity with ICAO/DGCA-CAR, complete as required as per specifications.

Supply of Indoor type air cooled constant current regulator of micro processor controlled, thyristor type suitable for remote as well as local control operations on input voltage 230/415 volts, 50Hz AC supply with 6.6A output having 5 steps brightness control with variation of current output and able to communicate with PC or PLC controlled system, with suitable rating Microprocessor based release (Ics = Icu = 25kA) incomer 3 Pole 63 Amp. MCCB, digital output ammeter (0-10A), overcurrent, overvoltage, open circuit and earth fault protection and digital earth leakage meter, two stage earth leakage detector, positive back indication equipments, LED/LCD display, suitable for connection and communication with ALCMS for operation of LED type AGL Circuits etc complete as required confirming to technical specifications for the following rating. a) 4 KVA