Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.1 LAccepted-AOC | ₹29.1 L Quoted ₹29.5 L | L1 | Accepted-AOC Lowest |
| 2 | L2₹33.8 LRejected-Finance | ₹33.8 L | L2 | Rejected-Finance Not lowest |
| 3 | L3₹37.2 LRejected-Finance | ₹37.2 L | L3 | Rejected-Finance Not lowest |
| 4 | L4₹39.7 LRejected-Finance | ₹39.7 L | L4 | Rejected-Finance Not lowest |
| 5 | L5₹41.0 LRejected-Finance | ₹41.0 L | L5 | Rejected-Finance Not lowest |
| Sl No | Description | Qty | Unit | M/S J J ENTERPRISES L3 | Anjana corporation L7 | SUN LIGHT HOUSE L4 | M/S DIVIJA BUILDERS L2 | M.R.ENTERPRISES L1 | HARSHA CONSTRUCTIONS L6 | SRI SAI ENTERPRISES L5 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Cleaning of Septic tanks of 150 users capacity by dewatering mechanically all the water, taking out the sludge/night soil, cleaning the chocked inlets, outlets of septic tanks, removing all the sludge outside MoD land, complete all as directed. | 12 | Each | 3,000 ₹36,000 | 10,000 ₹1.2 L | 9,000 ₹1.1 L | 10,050 ₹1.2 L | 7,000 ₹84,000 | 33,500 ₹4.0 L | 9,451 ₹1.1 L |
| 2.00 | M&L for Cleaning of all blockage of any type of sewage line i.e, branch sewer line, main sewer line etc., by rodding and cleaning/disludging of manholes of any section and depth mechanically using super jetting machine or by suitable means as ordered and making the sewage line functional, cleaning the trap,water closet,soil, waste/vent pipe,gully traps upto final drop out let into first manhole/septic tanks and removing the sludge/foreign material and depositing the same outside the MOD land complete all as directed by Engr-in-Charge. | 11 | Each Month | 35,000 ₹3.9 L | 48,000 ₹5.3 L | 45,000 ₹5.0 L | 45,000 ₹5.0 L | 30,000 ₹3.3 L | 22,500 ₹2.5 L | 40,125 ₹4.4 L |
| 2.01Note :- (i) Contractor should deploy 02 members to attend complaints and adequate precautions and safely measures shall be taken while working under foul conditions and cost for the same shall be deemed to be included in the quoted rate. (ii) Contractor or his representative shall collect the complaints from complaint cell in job cards (as per specimen attached as Annex ‘A’) from the concerned JE on all days and the complaint shall be attended & rectified by the contractor on priority depending on the nature & urgency of complaint.The job card shall be returned to JE on completion of the complaint and duly signed by the User/Occupant . If the contractor or his representative fail to collect the complaints from the complaint cell on daily basis, a penal recovery of Rs.2500/day shall be recovered from the RAR/bill due to contractor. | ||||||||||
| 3.00 | Excavation in trenches 1.5 mtr in width and not exc 1.5 mtr in depth for foundations, manholes and getting out in hard dense soil complete all as directed | 100 | Cum | 150 ₹15,000 | 485 ₹48,500 | 450 ₹45,000 | 306 ₹30,600 | 300 ₹30,000 | 150 ₹15,000 | 398 ₹39,800 |
| 4.00 | Cutting into existing manholes for connecting new drains of internal dia of pipe 200 mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) smooth finished and reforming benching as required complete all as directed. | 15 | Each | 1,000 ₹15,000 | 800 ₹12,000 | 750 ₹11,250 | 120 ₹1,800 | 300 ₹4,500 | 3,200 ₹48,000 | 412 ₹6,180 |
| 5.00 | M&L for cement concrete bed 1:3:6 type C2 to drain pipe 200 mm bore including packing under and hunching against the sides of pipes after they laid and tested including demolition of old concrete and removing debris outside of MOD land complete all as directed. | 100 | RM | 700 ₹70,000 | 525 ₹52,500 | 500 ₹50,000 | 102 ₹10,200 | 300 ₹30,000 | 280 ₹28,000 | 487 ₹48,700 |
| 6.00 | M&L for Plain Cement Concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping, benching including necessary form work and demolition of concrete. complete all as directed. | 3 | Cum | 6,000 ₹18,000 | 8,450 ₹25,350 | 8,000 ₹24,000 | 4,500 ₹13,500 | 5,000 ₹15,000 | 2,900 ₹8,700 | 7,312 ₹21,936 |
| 7.00 | M&L for 200mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars including taking out existing old existing pipe complete all as directed | 100 | RM | 1,200 ₹1.2 L | 499 ₹49,900 | 350 ₹35,000 | 625 ₹62,500 | 300 ₹30,000 | 380 ₹38,000 | 444 ₹44,400 |
| 8.00 | M & L for plain cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation including demolition of concrete, complete all as directed. | 3 | Cum | 3,500 ₹10,500 | 6,750 ₹20,250 | 6,200 ₹18,600 | 3,400 ₹10,200 | 4,000 ₹12,000 | 2,850 ₹8,550 | 5,958 ₹17,874 |
| 9.00 | Retuning, filling in, including spreading levelling , watering and wall ramming in laying not exc 25 cm thick complete all as directed. | 45 | Cum | 10 ₹450 | 99 ₹4,455 | 80 ₹3,600 | 60 ₹2,700 | 70 ₹3,150 | 100 ₹4,500 | 124 ₹5,580 |
Updated dates
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
10 Nov 2025, 6:00 pmClosed
GE I R and D Kanchanbagh
GE I R and D Kanchanbagh Kanchanbagh Post Hyderabad 500058
CLEANING OF SEWAGE LINES, SEPTIC TANKS, MANHOLES, CLEAING OF CHAMBERS FOR DMDE AREAS AND SECUNDERABAD RESIDENTIAL AND OTM COMPLEX UNDER AGE B/R -II SECUNDRABAD
2025_MES_735082_1
8122
Open Tender
Civil Works
180 days
GE I R and D Kanchanbagh
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE I R and D Kanchanbagh
₹98,000
Yes
9 Jan 2026
14 Oct 2025
12 Nov 2025
14 Oct 2025
10 Nov 2025
28 Oct 2025
Amount
Cleaning of Septic tanks of 150 users capacity by dewatering mechanically all the water, taking out the sludge/night soil, cleaning the chocked inlets, outlets of septic tanks, removing all the sludge outside MoD land, complete all as directed.
M&L for Cleaning of all blockage of any type of sewage line i.e, branch sewer line, main sewer line etc., by rodding and cleaning/disludging of manholes of any section and depth mechanically using super jetting machine or by suitable means as ordered and making the sewage line functional, cleaning the trap,water closet,soil, waste/vent pipe,gully traps upto final drop out let into first manhole/septic tanks and removing the sludge/foreign material and depositing the same outside the MOD land complete all as directed by Engr-in-Charge.
Excavation in trenches 1.5 mtr in width and not exc 1.5 mtr in depth for foundations, manholes and getting out in hard dense soil complete all as directed
Cutting into existing manholes for connecting new drains of internal dia of pipe 200 mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) smooth finished and reforming benching as required complete all as directed.
M&L for cement concrete bed 1:3:6 type C2 to drain pipe 200 mm bore including packing under and hunching against the sides of pipes after they laid and tested including demolition of old concrete and removing debris outside of MOD land complete all as directed.
M&L for Plain Cement Concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping, benching including necessary form work and demolition of concrete. complete all as directed.
M&L for 200mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars including taking out existing old existing pipe complete all as directed
M & L for plain cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation including demolition of concrete, complete all as directed.
Retuning, filling in, including spreading levelling , watering and wall ramming in laying not exc 25 cm thick complete all as directed.
Removal of surplus soil to a distance exceeding 500 mtrs but not exceeding 1.50 km complete all as directed.
M&L for pre cast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in cover slabs, set in cement mortar (1:4) for manholes including necessary including demolition of old broken RCC cover, slabs and from work complete all as directed.
S&F TMT bars 10 mm dia cut to length, bent to shape required and binding with MS wire (annealed) not less than 0.90 mm dia complete all as directed.
Demolition Brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M & L for Brick work with sub class 'B' old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4). complete all as directed.
M & L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick/Stone or concrete surfaces, finished even and smooth without using extra cement complete all as directed.
M & L for walling of random rubble stone masonry, un-coursed, well bonded, bedded, solidly hearted and built in cement mortar 1:6 complete all as specified and directed.
M & L for walling of random rubble stone masonry but except stones un-coursed, well bonded, bedded, solidly hearted and built in cement mortar 1:6 complete all as specified and directed.
M & L for Raised pointing to random rubble masonry coursed or brought up to courses in cement mortar 1:3.
M&L for cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in surface channels, drains.including demolition of concrete, complete all as directed.
M&L in repairs Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0
M&L in repairs for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as directed
M&L Prepration new steel surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified.
M&L for preparation of Newly plastered surface and applying two coats of exterior antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer complete all as specified and as directed by Eng-in-charge.
S&F Non skid joint less coloured ceramic tiles 7-8mm thick size 300x300 mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over M&L 20 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified incl dismantling of old tiles.
M&L for glazed ceramic coloured tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over 15mm thick rendering or bedding layer of cement mortar 1:4 and incl dismantling of old tiles complete all as specified.
M&L for light coloured vitrified tiles of any design and pattern, 600x600x9 to 10mm thick, as in floor and skirting etc incl 15mm thick screed bed in CM 1:6 Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, tiles shall be free from visible defects including dismantling existing tile work with screed bed.
Ditto item no above but as in skirting and vertical surfaces, set and jointed in neat cement slurry and pointed with white or coloured cement laid over 10 mm thick backing coat of cement mortar 1:4 including dismantling existing tile work with plaster complete all as specified and directed.
S&F Multicolour double layered black out fabric roller zebra blinds Rolling type including hanging mechanism water resistant, UV protection and printed on blinds DMDE crust for window etc fixed complete all as directed .
Supply & fixing of UPVC windows or UPVC framed portion 3 track 3 panel sliding window with two glazed and one SS wire mesh sliding shutters of profile width of from 40 mm to 45 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tensile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile moduels - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature complete all as specified. incl dismantling of old windows any descriptions and any size and make good existing surface.
M&L for preparation of old decorated surface of exterior wall by removing existing treatment and washing with water and applying two coats of exterior antifungal acrylic emulsion paint as per manufacturers instructions over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note:- i) Paint work should be carried out by Authorised applicator with brand waranty. ii) The work carryout upto 4 story bldgs and rates are incl necessory eqpt and Scaffolding.
M&L for complete removal of existing treatment from surfaces of walls/ ceiling, washing with water and applying two coats of OBD paint as per manufacturers instructions one coats of putty 1.5mm thick to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge.
S&F in repairs vitreous China wash down water closet pan (Pedestal Pattern) with P or S trap, white including fixing bolts, plastic water closet seat, White, closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device and flush pipe complete all as directed.
S&F in repair viterous china water closet Orissa pattern of 580 mm x 440 mm white with intergral foot rests including provision of P or S trap including connection to flushing pipe and complete making good to floor all as directed.
S&F in repairs vitreous china WHB white flat back size 550 mm x 400 mm excluding taps and including brackest , waste coupling , waste pipe and PVC connection and including cutting for & pinning in ends of brackets complete all as directed.
S&F in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe.
S&F in repairs pillar taps of 15 mm bore fancy type cast copper alloy with capstan heads, chromium plated,screwed down high pressure with or without lettered hot cold with long screwed shanks and fly nuts screwed for iron pipe complete all as directed
S&F in repairs brass chromium plated health faucet with 1.2m long PVC tube & wall hook. screwed for 15mm dia bore iron pipe complete all as specified. Make: Hindware or equivalent
S&F in repairs brass chromium plated two in one tap screwed for 15mm dia bore iron pipe complete all as specified and directed. ISI marked
S&F in repairs brass chromium plated shower rose with swivel joints 125mm dia incl stainless steel arm, ISI marked incl fixing to steel pipe or union.ISI marked
S&F in repairs stainless steel grating of 100 mm dia CP grating for nahani traps with or without hole for waste pipe complete all as directed
S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm long complete all as directed. ISI marked
S&F in repairs 15 mm dia long nose bib taps, cast copper alloy chromium plated with capstan head , screwed down, screwed for iron pipe complete all as directed. ISI marked
S&F in repairs 15 mm dia Bib taps, cast copper alloy chromium plated with capstan head , screwed down, screwed for iron pipe complete all as directed.ISI marked.
S&F in repair sink made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, incl pvc waste pipe and cp waste fitting.overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.
S&F in repairs 15-mm bore bib taps, cast copper alloy chromium plated fancy type with capstan head, screwed down, and screwed for iron pipe complete all as directed.
Supply and fixing in repairs 15mm & 20mm GI small fittings such as socket, elbow, nipple, tee, union, Double Nipple etc for galvanised iron 15mm & 20 mm bore pipe complete all as specified and as directed. Note:- Taking down and refixing of old GI tubing upto 1.5m included in rates.
M & L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including cutting grooves and nosing laid over 15mm thick screed bed in CM 1:4 including dismantling old work complete all as specified and directed.
S&F in repairs 16 mm bore of CPVC pipes SDR 11 & plain fiitings and fixed complete to wall or laid in floor complete all as directed.
S&F in repairs 20 mm bore of CPVC pipes SDR 11 & plain fiitings and fixed complete to wall or laid in floor complete all as directed.
S&F 12mm thick Toughened frosted/tinted glass doors both sides swing with self locking floor spring suitable for glass door fitted with necessary fixing arrangements with wall and stainless steel pivot complete in all respect and Incl dismantling existing glass door any size as specified & directed. Make : Modiguard/ saint Gobain
S&F 10 mm thick Toughened frosted/tinted glass partition etc complete in all respect and Incl dismantling existing glass partition any size as specified & directed. Make : Modiguard/ saint Gobain
S&F Stainless steel door lock suitable for glass door of thickness 10-12mm fixed in floors complete with necessary arrangements complete all as speicified and directed.. Make : Godrej/Ozone
S&F Stainless steel door handle 450mm long for toughened glass door including necessary holes in glass complete all as specified and directed.
Renewing cement concrete chequered tiles / inter locking tiles in patch, area exc 5 Sqm including removing and cleaning old tiles, preparing bed and laying or setting, jointing and pointing new or old tiles, including replaced damage tiles & providing PCC (1:4:8) sub base where reqd complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in Ground floors and paving n.exe 15cm thickness ( below or above ground level ) including removal of rubbish out side complex (MOD land), complete all as specified and directed.
M&L for Cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in mass concrete of sub base of flooring/ hard standing.
M&L PU coated machine pressed cement concrete tiles 30cm x 30cm x22 mm thick with grey cement and pigment set jointed and pointed in neat cement slurry in floors laid over 20mm thick screed or bedding layer in CM 1:6, including dismantling existing floor tile and screed bed of any description complete all as directed by Engr-in-charge
M/S DIVIJA BUILDERS (BID ID -3466190)
M/S J J ENTERPRISES (BID ID -3464859)
SUN LIGHT HOUSE (BID ID -3465418)
SRI SAI ENTERPRISES (BID ID -3463155)
HARSHA CONSTRUCTIONS (BID ID -3470561)
Anjana corporation (BID ID -3465407)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.61 MB
Tenderdocument.pdf
Tender Documents • 1.32 MB
BOQ_823125.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid