Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.1 LAccepted-AOC 80 G HIMMATGANJ PRAYAGRAJ U P PIN 211016 | PRAYAGRAJ | UTTAR PRADESH | 211016 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹22.2 L+₹1.1 L (5.00%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹22.3 L+₹1.2 L (5.68%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹23.2 L+₹2.1 L (9.91%)Rejected-Finance | L4 | Rejected-Finance Other than L1 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
11 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST PRAYAGRAJ
GE WEST PRAYAGRAJ PIN-211001
REPAIR TO WALL PLASTER, EXTERNAL CHAJJA AND PERIODICAL SERVICES OF MD ACCN UNDER AGE B/R II AT NEW CANTT PRAYAGRAJ.
2023_MES_603667_1
8641/E8
Open Tender
Civil Works
Item Rate
270 days
GE WEST PRAYAGRAJ
As per Tender Documents
8 documents required · 8 mandatory
₹500
GE WEST PRAYAGRAJ
₹70,000
Yes
9 Aug 2023
16 Jun 2023
12 Jul 2023
16 Jun 2023
11 Jul 2023
29 Jun 2023
Amount
M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of white wash on old surface of wall complete all as specified and directed.
M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying two coats of white wash on old surface of wall complete all as specified and directed.
M&L for preparation of old plastered or unplastered surface of ceiling including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of white wash on old surface of ceiling complete all as specified and directed.
M&L for preparation of old plastered or unplastered surface of ceiling including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying two coats of white wash on old surface of ceiling complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of oil bound distemper using airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr,the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint supplier and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower & masking tape Including cleaning of entire surface complete all as specified and directed. Note: Sanding of old decorated surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment, certified by paint manufacturer.
M&L for complete removing of existing treatment by scarping with Asian paints trucare wall sander L-01/H-01 (having mechanical vacuum mechanism ) are equivalent having RPM not less than 1500, sanding pad of 80 grit having dia of 7 inch / 9 inch to make the surface free from dust loose paint etc by skilled labour and applying two coat of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint supplier and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower & masking tape Including cleaning of entire surface complete all as specified and directed.
M&L for complete removing of existing treatment by scarping with Asian paints trucare wall sander L-01/H-01 (having mechanical vacuum mechanism ) are equivalent having RPM not less than 1500, sanding pad of 80 grit having dia of 7 inch / 9 inch to make the surface free from dust loose paint etc by skilled labour and applying 1-2mm thick white putty in one or two coat and applying two coat oil bound distemper over a one coat of exterior water based primer by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed.
M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of Cement Base Paint white or tinted of approved shade complete all as specified and directed. Note: sanding of old decorated surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment, certified by paint manufacturer.
M&L for complete removing of existing treatment by scraping with Asian paints trucare wall sander L-01/H-01 (having mechanical vacuum mechanism ) are equivalent having RPM not less than 1500, sanding pad of 80 grit having dia of 7 inch / 9 inch to make the surface free from dust loose paint etc by skilled labour and applying two coat of of Cement Base Paint white or tinted of approved shade complete all as specified and directed.
M&L for Complete removal of existing treatment of wall and applying white cement based wall care putty(Birla/JK white) on the surfaces with minimum 2 to 3 mm uniform thickness making surface absolutely smooth by grinding with sand paper & applying two coats of Plastic Emulsion Paint white or tinted over one coat of primer complete all as specified and directed .Note: Scraping of old decorated surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment, certified by paint manufacturer.
M&L for preparing old plastered decorated surfaces of wall and applying one coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti algae high performance exterior wall finish with 6 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Note: sanding of old decorated surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment, certified by paint manufacturer.
M&L for complete removing of existing treatment by scraping with Asian paints trucare wall sander L-01/H-01 (having mechanical vacuum mechanism ) are equivalent having RPM not less than 1500, sanding pad of 80 grit having dia of 7 inch / 9 inch to make the surface free from dust loose paint etc by skilled labour and applying two coat of acrylic smooth exterior emulsion of approved colour with silicon additive & colour stay Technology, Excellent Dirt Pick up Resistance of Asian paints Ltd or its equivalent with low VOC less than 50, Anti fungal properties in two coats @ 1.79 Ltrs (undiluted) 10 Sqm diluted with water in 5:2 ratio applied over priming coat with fully automatic airless spray machine of paint application of Asian paints Trucare Graco or equivalent having an electric motor of min 1HP with flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint with 8 years performance warranty from manufacture and instruction complete all as specified & directed.
Taking down plaster from edges of RCC chajja or corners where steel reinforcement coming out and grouting with cement and filling the same with 15mm thick rendering in CM (1:3 ) and as per direction of Engr-in-Charge applying two coats of cement base paint over a coat of primer to match with the existing shade/colour of buildings complete all as specified and directed at site. (Note : The work to be carried upto four storey height. Cost of scaffolding and its removal deemed to be included in quoted rate.
M&L for preparation of old painted surface of wood and wood based materials by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed.
M&L for preparation of old painted surface of wood and wood based materials by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots of any description, not otherwise described, over 10cm in width or girth and applying two coat of synthetic enamel paint, white or tinted complete all as specified and directed.
M&L for preparation of old painted surface of steel and iron by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed.
M&L for preparation of old painted surface of steel and iron by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots of any description, not otherwise described, over 10cm in width or girth and applying two coat of synthetic enamel paint, white or tinted complete all as specified and directed.
M&L for complete removing existing old painted wall surfaces treatment & finishes including cornices etc by , scrapping down smoke soot, moulds, moss and efflorescent salt and treating for removal oil and greasy spots and removal of vegetation any type by vigorously wire brushing, brooming, dusting & finally washing with water to clear the cracks absolutely free from any kind of existing finishes & foreign materials, making good minor surfaces imperfections such as holes, dents cracks etc in cement mortar 1:3 and applying white cement based wall care putty (Birla/JK white) on the surfaces with minimum 2-3mm uniform thickness and making surfaces absolutely smooth and applying two coats of synthetic enamel Paint white or tinted of approved shade over a coat of primer upto four storey height including all necessary arrangements of scaffolding etc complete all as specified and directed. (Note : The work to be carried upto four storey height. Cost of scaffolding and its removal deemed to be included in quoted rate.
M&L for writing lettrs or figures (block. roman, Italic or indian) n.exc 30cm height complete all as specified and directed .
M&L for preparation of old painted brick or concrete surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint white or tinted complete all as specified and directed.
Demolition of reinforced cement concrete of any description complete all as specified and directed
Cutting holes into or through cement concrete slabs chajjas,etc reinforced if reinforcement is cutting through, superficial area not exceeding 100 Sqcm complete all as specified and directed
M&L for Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in Chajjas , landing, balconies, canopies, desk slab and in shelves etc complete all as specified and directed.
Use and waste for form work to chhajjas , racks stabs, lintel or similar work for fair finished surfaces, horizontal etc complete all as specified and directed
S & F mild steel TMT bars 10mm dia & over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends land binding with mild steel wire (annealed) not less than 0.9mm dia, or securing with clips complete all as specified directed
All as per item No 25 above but 6 to 8mm dia complete all as specified and directed
M&L for PCC type B-0 using12.5mm graded aggregate as in kerbs or rounded or chamfered on edge and throating complete all as specified and directed
S&F wire netting of stainless steel wire 0.71 dia and size of mess 25mm (chicken wire mess) complete all as specified and directed
Demolition of brick work or stone masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed
M&L for brick work with fly ash bricks old size , straight or curved on plan exceeding 6M mean radius, built in cement mortar 1:6 complete all as specified and directed
M/L for brick work with fly ash bricks, straight or curved on plan of any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed
All as per Srl item No 30 above but except old size sub class 'B' bricks.(Note:- Old bricks retrieved from demolition shall be re-used)
Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed
M&L for rendering 5mm thick in CM 1:3 finished even and fair without using extra cement complete all as specified and directed
M&L for 10 mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and smooth without using extra cement complete all as specified and directed
M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, concrete surfaces with WPC (liquid form) finished even and fair without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid under respective item.
Supply only integral water proofing compound complete all as specified and directed
M&L for preparing of newly plastered wall surface and applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti algae high performance exterior wall finish with 6 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Note: Sanding of new surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment, certified by paint manufacturer.
M&L for preparation of new plastered surfaces of wall and applying 1-2mm thick white putty and applying two coat oil bound distemper over a one coat of exterior water based primer by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Note: Sanding of new decorated surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment, certified by paint manufacturer.
M&L for preparing of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.
M&L for preparing of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M&L applying two coat of Dr Fixit sure seal damproof chemical on plaster/unplastered surfaces complete as per manufacturer's instructions all as specified & directed.
M/S NAGENDRA AND BROS ENTERPRISES
Anupravesh Enterprises
Channa Brothers and Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .