Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.7 LAccepted-Finance | L1 | Accepted-Finance Lowest and reasonable bid | |
| 2 | L2₹26.8 L+₹15,201.82 (0.57%)Rejected-Finance | L2 | Rejected-Finance Other than the lowest bid | |
| 3 | L3₹28.7 L+₹2.0 L (7.64%)Rejected-Finance 239 PHASE 2 MODEL TOWN BATHINDA BATHINDA PUNJAB 151001 | BATHINDA | PUNJAB | 151001 | L3 | Rejected-Finance Other than the lowest bid | |
| 4 | L4₹29.3 L+₹2.6 L (9.70%)Rejected-Finance | L4 | Rejected-Finance Other than the lowest bid | |
| 5 | L5₹29.8 L+₹3.1 L (11.6%)Rejected-Finance | L5 | Rejected-Finance Other than the lowest bid |
Tender Value
₹32 L
EMD Value
₹64,000
Closing Date
26 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER (WEST)
KABIR ROAD JALANDHAR CANTT
WELCOME MAINT (B/R AND E/M) IN OFFRS MD ACCN IN A-1 AREA AND COMPREHENSIVE MAINT TO CERTAIN LOCATIONS OF A-2 AREA OF AGE B/R-I UNDER GE (WEST) JRC
2023_MES_619820_1
GE/JAL(W)-58/2023-24
Open Tender
Civil Works
Item Rate
270 days
JALANDHAR CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GARRISON ENGINEER (WEST)
₹64,000
Yes
15 Nov 2023
21 Sept 2023
2 Nov 2023
21 Sept 2023
26 Oct 2023
14 Oct 2023
Amount
Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles incl removing mortor and cleaning serveciable bricks
M&L brickwork with subclass `B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified.
M&L brickwork with subclass `B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except bricks
Taking down cement or cement plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc all as specified
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth w/o using extra cement all as specified and directed.
M&L for preparing new plastered or unplastered wall surfaces and applied two coat of cement base paint over one priming coat complete all as specified and directed by Engr -in-charge.
M&L 15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement all as specified
M&L for preparing new surfaces plastered or unplastered surfaces of walls by applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Engr -in-charge.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off premises complete all as specified and as directed by the Engineer-in-Charge.
M&L for non skid ceramic, coloured, joint free, tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with colour of the tiles over and including screed bed of 15mm thick cement mortar (1:4) complete all as specified and as directed.
M&L for non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in skriting set and jointed in neat cement slurry and pointed in white or colored cement to match over and incl 10mm thick rendering as backing coat of CM 1:4 complete all as specified.
S&F glazed ceramic tiles 350mmx250mm/300mmx200mm, 7mm thick as ion vertical surfaces viz dados, skirtings etcset and jointed in neat cement slurry and pointed in white cement mixed with pigment to match colour of tiles over and including rendering 10mm thick cement mortar (1:4) complete all as specified and as directed
M&L for vitrified ceramic, light shade tiles 10 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 Sqm; as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with colour of the tiles over and including screed bed of 15 thick cement mortar (1:6) complete all as specified and as directed.
M&L for vitrified ceramic, light shade tiles 10 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 Sqm; as in skirtings etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with colour of the tiles as in skriting over and including rendering 10 thick cement mortar (1:4) complete all as specified and as directed.
M&L for vitrified ceramic, Light shade tiles 10 mm thick (square/rectangular) polished, area of each tile exc 0.42 and not exceeding 1.00 Sqm; as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with colour of the tiles over and including screed bed of 15 thick cement mortar (1:6) complete all as specified and as directed.
M&L for vitrified ceramic, light shade tiles 10 mm thick (square/rectangular) polished, area of each tile exc 0.42 and not exceeding 1.00 Sqm; as in skirtings etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with colour of the tiles as in skriting over and including rendering 10 thick cement mortar (1:4) complete all as specified and as directed.
Dismantling of AC corrugated/semi corrugated) sheets as in roof covering all as specified and directed by Engineer-in-Charge.
Material & Labour for 6 mm thick AC sheet corrugated or semi corrugated sheets in roofs fixed with `L' hook or `J' bolt all as specified and directed.
Taking down Chowkat or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed by EIC.
Taking down Chowkat or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed by EIC.
S&F steel window 1.25mm thick box type ERW hollow P section of size 60mmx25mm single rebated comprises gauged skeleton shutter ERW, sec 50mmx20mm and 1mm thick with two operable leaf consisting two Nos sash bars of T-section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion PCC (1:2:4) type B-1 (four Nos for each window) including following fittings welded to frame/shutter:- (a) Hold fast,150mm long of 12mmx3mm made to shape-04 Nos per window (b) Handle of Z section 20mmx25mm 100mm long 01 Nos per leaf (c) MS tower bolt 150mm long-2 Nos per leaf. (d) Z Section 20mmx25mm,100mm long stopper- 01 No per leaf (f) MS pintle hinges of size 75mmx12mm-2 Nos per leaf. (g) Fabrication and fixing arrangement as per Drg No.CEJZ/TD-06/07. Note:- Wire mesh shall be measured and paid separately under appropriate item.
All as per Item No. 21 here-in-before but glazed shutter. Note:- Glass shall be measured and paid separately under appropriate item
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
M&L for preparation of new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F powder coated aluminium frame for doors,windows, partitions ,ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.
S&F powder coated aluminium door shutters ,aluminium section weighing 0.55 kg/m including necessary joining cleats ,glazing clips, rubber neoprene packing, handles 2 Nos in each door, 04 nos butt hinges, 02 Nos Tower bolts , 01nos mortice lock, anodised aluminium snap beading screws etc complete all as specified.
S&Fpowder aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
S&F sheet glass 4.8 mm thick ordinary quality to be fixed in Al frame work in square exc 0.5 sqm in each pane
S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanized wire staples complete all as specified as directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal/wooden surfaces including punching or drilling out old glazing pins/spring clips exceeding 1.5 Sq.m and providing and fixing new pins/clips complete all as specified.
S&F sheet glass 3mm thick ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 Sq.m in each pane complete all as specified and as directed.
Mild steel conforming to Fe 290, Gde E-165 framed work as in door frames, chowkhats including necessary cutting, welding, bending, drilling and cutting holes for holdfast into the jambs etc., complete all as specified and directed.
S&F 35 mm thick plain, framed, panelled shutters factory made of second class hard wood (Hollock/ Bonsum/ Champlas) door shutters with two panels having lock rail and panels of 9mm BWP commercial ply, the size of rail and style as per IS 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified under the circumstance of extreme urgency of the work and operational functions
S&F 35mm thick glazed and skeleton shutters of 2nd class hard wood (Hollock / Bonsum / Champlas) open rebated and prepared to receive glass gauze etc without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I Sec 8 clause 8.23 (a).
S&F 100 mm size butt hinges galvanized mild steel, medium weight, cold rolled complete all as specified.
S&F 250 mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed
S&F 150m mild steel semi barrel tower bolt, riveted or spot welded type with back plates, with bright bolt and open staple, and fixed
S&F125mm mild steel pressed handles, oval type, stove enamelled black
M&L for preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F in replacement aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 Kg complete all as specified as directed.
Taking up or down 15 mm bore steel tubing and connection including cleaning serviceable steel tubing and fittings for refixing and removing unserviceable from site including cutting chases in wall/floor and making good the surfaces complete all as specified.
S&F 15 mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall (including cutting chases), ceiling or laid in floors complete all as specified.
Taking up or down 20 mm bore steel tubing and connection including cleaning serviceable steel tubing and fittings for refixing and removing unserviceable from site including cutting chases in wall/floor and making good the surfaces complete all as specified.
S&F 20 mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall (including cutting chases), ceiling or laid in floors complete all as specified.
S&F in replacement 15 mm bore chromium plated bib tap fancy type cast copper alloy with crutch or butterfly handle screwed down screwed complete all as specified.
S&F in repair 15 mm bore stop valve (or angle valve) fancy type chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends complete all as specified and directed.
S&F in replacement PVC connection 15mm dia and 45cm long with two Nos of brass check nuts and washers complete all as specified and directed.
S&F in replacement 15mm bore brass chromium plated mixer with long spout or mixing hot and cold water for wash basin screwed down for 15 dia iron pipe including braded hose for hot water 15 mm dia complete all as specified and directed.
S&F in replacement 15mm bore brass chromium plated wall mixer for mixing hot and cold water screwed down for dia iron pipe complete all as specified and directed.
S&F in replacement 32 mm bore waste coupling of PTMT (half or full threaded) with minimum weight 45 gms complete all as specified and as directed.
S&F in replacement chromium plated grating 125mm dia circular, fixing with cement mortar 1:3 on Nahani or floor trap complete all as specified and directed.
S&F pillar taps, cast copper alloy with capstan heads chrominm plated fancy type, screwed down high pressure with or without lettered Hot or Cold with long screwed shank and fly nuts, srewed for iron pipe and fixed 15mm bore.
S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including plastic seat cover closed pattern including bolts, flush pipe of polyethylene of low or high density PVC 32mm dia anti-syphonage pipe etc and connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc complete all as specified and as directed.
S&F in repairs vitreous china ware squatting pan ‘Orissa’ pattern size 580x440mm white with integral foot rest including connection to trap and flushing pipe, anti-syphonage pipe etc and making good to floor etc complete all as specified and as directed.
S&F in repair vitreous china wash hand basin, white, flat back size 550mmx400mm including cast iron or mild steel brackets including cutting for and pinning in brackets complete all as specified and as directed.
S&F in replacement; sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx420mm bowl size 410mmx330mmx160mm complete all as specified and as directed by EIC.
Supply, hoist and fix in repairs position; 500 litres capacity rotational moulded polythene water storage tank (cylindrical, vertical with closed top) ISI marked (Name of firm embossed or engraved on the body of tank) conforming to IS 12701, double layered including dismantling the existing tank complete all as specified .
Supply, hoist and fix in position; 1000 litres capacity rotational moulded polythene water storage tank (cylindrical, vertical with closed top) ISI marked (Name of firm embossed or engraved on the body of tank) conforming to IS 12701, double layered including dismantling the existing tank complete all as specified.
S&F solid PVC door frame of size 50x47 mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube complete all as specified
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing
S&F 150 mm long aluminium, anodized, barrel tower bolts of extruded section and ISI marked complete all as specified.
S&F aluminum cast type anodized handles 150mm long. complete all as specified.
M&L for prepration of old decorated surfaces of walls, washing rubbing down and stooping of distempered and painted surfaces and applying one coat of oil bound distemper complete all as specified and directed by Engr -in-charge.
M&L for prepration of old decorated surfaces of walls incl, scraping down smoke soot, moulds, moss & efflorescent salts & trading oil and greesing spots etc & applying two coats of interior emulsion paint as per manufacurers instructions and directed by Engr -in-charge.
M&L for prepration of old decorated surfaces of AC Roof sheets incl, scraping down smoke soot, moulds, moss & efflorescent salts & trading oil and greesing spots etc & applying two coats of exterior emultion paint as per manufacurers instructions and directed by Engr-in-charge.
M&L for prepration of old surfaces of ceiling and applying one coat of white(lime) wash on ceiling complete all as specified and directed by Engr -in-charge.
M&L for preparing of old surfaces of walls and applying one coat of birla white putty and finished smooth complete all as specified and directed by Engr -in-charge.
M&L for prepration of old wooden surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed by Engr -in-charge.
M&L for prepration of old steel surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed by Engr -in-charge.
Material and labour for Granite (of any type) work 20mm thick machine cut (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms, shelves in cupboard, handwash places and like including necessary cutting and grooving to walls and making good including 10mm thick in cement mortar (1:3) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite complete all as specified and directed.
S&F in repairsHealth faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexile tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
Demolition and breaking 100/75 mm dia drain pipe (AC Pipe) set in cement mortar
S & F 110 mm bore PVC (SWR) pipe of pressure rating 6kgf/cm2 single socketed in any length with rubber ring joints jointing with adhesive fixed in repair to wall/laid in trenches complete all as specified and directed.
S&F 110 mm bore PVC (SWR) bends in any radius complete all as specified and directed.
S&F PVC (SWR) junction single (single tee) equal or unequal, dia of pipe 110 mm complete all as specified and directed.
S & F 75 mm bore PVC (SWR) pipe of pressure rating 4kgf/cm2 single socketed in any length with rubber ring joints jointing with adhesive fixed in repair to wall/laid in trenches complete all as specified and directed.
S&F 75 mm bore PVC (SWR) bends in any radius complete all as specified and directed.
S&F PVC (SWR) junction single (single tee) equal or unequal, dia of pipe 75 mm complete all as specified and directed.
S&F 75mm dia PVC (SWR) floor trap with grating including joining to waste pipe fixed in solvent cement incl taking down damaged floor trap in any position complete all as specified and directed.
S&F 110mm dia PVC (SWR) floor trap with grating including joining to waste pipe fixed in solvent cement incl taking down damaged floor trap in any position complete all as specified and directed.
S&F 18-19 mm thick pre-laminated particle board, exterior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified.
S&F continuous (Piano) hinges, mild steel bright finish or electro galvanized (width of flap when open 30mm) ISI marked complete all as specified and as directed.
M&L for 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified .
S&F 40m dia cup board knobs fixed with nut , screw and washer of brass polished
Taking down and refixing shutters of any description not exceeding 1.00 Sqm each complete all as specified and as directed.
Taking down and refixing shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and as directed.
Securing or easing and adjustment without taking down the shutter of any description exc 1 sqm and n exc 2 sqm each complete all as spd and directed
M&L for complete removal of existing treatment preparation of old surfaces of plastered or unplastered surfaces of walls and distempering with one coat of oil bound distemper complete all as specified.
Demolition of cement concrete in ground floor and paving n.exc 15 cm thick (below or above ground level complete .
M&L brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6 M mean radius built in CM 1:6 complete all as specified.
M&L brick work with sub class B bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as spd and directed
M&L Cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring, hard standing,Manhole, drain etc.
M&L 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggr) as in plinth protection/path finishing the surface even and smooth without using extra cement complete all as spd and directed. Note : Plinth protection shall be laid in (1:20) slope. The concrete shall be laid at a stretch not exceeding 3metre in length. Joint gap between adjoining slab, at corners and at junctions of walls shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen 85/ 25 grade mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3 metre interval at corner and as junction of walls.
M&L 10mm thick rendering in CM 1:3 on brick/concrete surface as in ceiling and finishing the surface even and smooth with out using extra cement.
M&L 15mm thick rendering on wall in CM 1:4 on brick/concrete surface and finishing the surface even and smooth with out using extra cement.
M&L 15mm thick rendering on wall in CM 1:4 on brick/concrete surface and finishing the surface even and smooth with out using extra cement using @ 3% WPC as in shaft portion complete all as directed. (Note : WPC shall be measured and paid at connected item of this schedule)
M&L coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over 10 mm thick cement plaster in CM 1:4.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any morter.
M&L Machine cut kota stone slab flooring 20-25mm thick over 20mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing upto mirror finished complete.
M&L Machine cut kota stone slab flooring 20-25mm thick as in skiritng, riser of steps etc laid over 10mm thick cement plaster in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing upto mirror finished complete.
M & L Absolute/Pure black Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm to 20mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-Charge.
Rounding/moulding to edges of Kota stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooking platform , and other similar situations etc
M&L for 15mm thick rendering in 1:3 CM with using @ 3% WPC as in sunken portion complete all as directed.
Supply only integral water proofing compound.
M & L Plain Cement Concrete Type A0 1:1.5:3 (using 12.5 mm graded stone aggregate) fillet at corners as directed by Engr in Charge complete.
M&L for priming surfaces with bituminous primer polymerised primer oil based @ 0.30kg per Sqm.
M&L for applying coat of industrial bituminous 85/25 @ 1.20 Kg per squqre mtr including cleaning surfaces.
M&L APP based polymeric membrance minimum weight not less than 3.0kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/sqm) land on primed surface by forced application( sealed by flame) with over lap of 15 cm complete all as specified and directed complete all as spd and directed.
M & L 25mm thick cement concrete flooring type B-1, 1 :2 : 4, using 20 mm graded stone aggregate finishing cement concrete surface even and smooth without using extra cement.
M& L Cement concrete type E-2, 1:5:10 using 40mm graded aggregate in foundations filling and mass concrete as in sunken floor.
Cutting holes into or through brick walls built, in cement mortar Superficial area n. exc 150 sq. cm upto 23cm of depth of wall for repairing of existing spout pipe complete all as specified.
M & L for 40mm dia GI pipe,med grade beveled cut at both ends by making hole in walls sunken portion aprox above the RCC slab and ceiling finished the hole with cement plaster 1:2 to match with existing surface complete etc. (Measured for cutting holes shall be paid in concerned schedule item)
Taking down shutters any description exc 1 sqm but n.exc 2sqm each and all as specified and directed
S&F pressed steel door frame with one or more rebate including necessary fixing lugs, hinges, lock stricking plate of size 105 x60mm
S&F pressed steel door frame with one or more rebate including necessary fixing lugs, hinges, lock stricking plate of size 125 x60mm
M&L for PCC Type B0-1:2:4 using 12.5mm graded aggregate as in filling of pressed steel frame, hold fasts and similars articles
Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required built in cement motar in brick wall depth of embedded portion of holdfast exc half brick but n exc one brick
S&F 2nd class hardwood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats.
S&F 2nd class hardwood glazed and skelton door shutters 35 mm thick divided into squares open rebated and prepared to receive glass, gauge etc edges of framing plain, chamfered, rounded tfitted with mltred beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.20 (b) supplied and fitted to chowkats with plain, chamfered or rounded mited and rebated bars any numbers.
S&F Extruded aluminium alloy handles fabricated type anodised 150mm size
S&F aluminium alloy anodised sliding door bolts 250 mm long with hasp, staple (bolt type)and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections as specified.
S & F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete.
S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150 mm
Demolition of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets
S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer board E-Board Classic to be fixed GI powder coated grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing at site super heavy hallow PVC wall panelling consisting of 5mm thick colour PVC sheet including PVC accessory of U+L and solvent cement and fixing on wall as per specification.
Refixing 15mm old GI tubing and connections in new or old position (Walls, ceiling, floors, etc.)
Refixing 20 mm old GI tubing and connections in new or old position (Walls, ceiling, floors, etc.)
Cutting chases, pinning in making good to facings where reqd and pointing in cement mortar 1:3 to ends or edges of shelves , for water tubing etc and making good, cutting exc 10cm girth but not exc 20cm girth in stone walls
S&F 20mm Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair
S&F ball float valve PTMT with epoxy coated aluminimum rod for 20 mm bore pipe high pressure with polythelene high density float and complete screwed for iron pipe.
S&F 15mm dia Brass stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, highpressure with crutch or butterfly handle, screwed both ends for iron pipe or for unlori as specified and fixed in repairs.
S&F 15mm dia Brass stop valves chromium plated, fancy type with long shank and cup screwed down, highpressure with crutch or butterfly handle, screwed both ends for iron pipe or for unlori as specified and fixed in repairs.
S&F in repair 15mm dia fancy type pillar taps cast copper alloy with capstan heads chromium plated scewed down high pressure with long scrwed shanks and fly nuts screwed for iron pipes
S&F Vitreous China Water closet (Squatting pattern) "Orissa Pattern" size 580x 440 mm white with 'P' or 'S' trap, front or back inlet and foots rests any pattern (excluding flusing cistern and flush pipe) in repairs completee
S&F 10 Litre PVC valveless syphonic action flushing cistern low level white with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dis for low level cistern in repairs
S&F in replacement CP grating 125mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani Trap or floor trap complete all as specified.
S&F in replacement CP Jet for EWC including flexible pipe complete all as specified.
S&F 15mm PVC connection 450mm long with PTMT nuts of superior quality as specified
S&F in toilet paper holder of brass chromium plated fixed to walls with brass screws
Supply and fixed Soap dish, any type fixed to walls with plugs with chromium plated brass screws
S&F for brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges etc complete all as spd and directed.
S&F brass chromium plated shower rose 125mm size complete all as spd and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)
Dismantling of cast iron or reinforced concrete drain pipes of size 100mm dia, jointed in cement mortar and taking out of trenches, if required.
S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls complete
S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls
S&F110mm PVC (SWR) bends
S&F75 mm PVC (SWR) bends
M & L for applying one coat of synthetic enamelled paint including preparation of old treated wood surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge
M & L for applying two coat of synthetic enamelled paint over one coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge
M & L for applying one coat of synthetic enamelled paint including preparation of old decorated steel surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge
M & L for applying white wash of 3 coats as in ceiling incl preparation newly plastered surfaces as specified and directed.
Taking down carefully aluminium / copper point wiring (light/ fan / socket or power) complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls and floors
Taking down sub main wiring of two single core PVC cable PVC insulated 4/6 sqmm including conduit or wooden batten and remove from the site of work and making good the disturbed surfaces of wall or floor etc. as directed by Engineer-in-Charge.
Taking down main switch / DB as directed by Engineer-In-Charge.
M&L for point wiring with PVC insulated, unsheathed cable single core multistranded copper conductor FRLS cable 1.5 sqmm size, 1100V grade, drawn into and including PVC rigid concealed conduit medium grade (ISI marked) including PVC unsheathed cable single core copper FRLS conductor 1.5 Sqmm as continuous earth wire and including pressed MS sheet sunken box 1.6 mm thick with 3 mm thick laminated bakelite sheet all as specified :- One light / fan / call bell point controlled by one, one way switch.
All as per Ser item No 158.00 above but for 5 amps socket on independent board
All as per Ser item No 158.00 above but for 5 amps socket on same board
All as per Ser item No 158.00 above but with 2.5 sq mm cable for 15 amps switch socket combination outlet on independent board complete all as specified and directed.
Supply and fix in repair Modular switch 6 Amps single pole one way
Supply and fix in repair Modular switch 16 Amps single pole one way
Supply and fix in repair Modular bell bush 5 Amps
Supply and fix Modular multi socket 3 pin and 2 pin 6 Amps round and flat
Supply and fix in repair Modular socket 6A /16 A Twin socket heavy duty
Supply & fixing switch piano flush type single pole one way 5 Amps all as specified.
All as item 167.00 here-in-before but single pole 5 Amps two way all as specified.
Supply & fixing switch piano flush type single pole 15 Amps.
Supply & fixing socket outlet 5 Amp flush button type all as specified.
All as per item 170.00 here-in-before but 6 pin 5/15 Amps multi type.
Supply & fixing ceiling roses surfaces bakelite two three terminals 65 x 50 mm all as specified.
Supply & fixing lamp holder PVC, insulated body with back plate suitable for batten fittings including LED lamp 9W all as specified.
Supply & fixing bell electric (dingdong) 230 volt, SP
Supply and fix in repair modular fan regulator step type 240 V, 120 W, 2 modules
Supply and fix ceiling fan regulator Electronic rotary Step type single phase A/C 230 volts all complete as specified and directed.
Supply & Fixing MCB DP 240 volts 40 Amps to 63 amps in the existing DBs.
Supply & Fixing MCB single pole, 240 volts, 6 to 32 Amps in the existing DBs.
Supply & Fixing MCB, 240 volts, 100 Amps SPN.
Supply & fixing MCB DB SPN with 200 amps rated Bus bar suitable for MCBS 8 way all as specified and directed by Engr-in-Charge.
Supply & fixing decorative wall light fixture made up of polycarbonate, with suitable LED Bulb
S&F LED secuirty light fitting 35 Watt with Electronic driver IP 66 Powder coated pressure die cst aluminum body with heat resistance toughened glass and accessories like GI Bracket, clamps etc
S & F surface mounted LED Battern with LED tube rod 2 feet 10W internal surge protection device of 4 KV with voltage band 140-280V and making electrical connection to ceiling rose all as directed
S & F 6.5 W LED Bulk Head fitting and connecting electricity using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed
S&F in replacement LED lights fitting 1 x 22W, 220V, (lumin should not be less the 120 lumin per watt) Decorative box type with driver, holder including LED tubelight connecting up with electricity to celling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed.
S & F distribution board TPN, double door, 04 way 240 Volts with sheet metal enclosure 200 Amps busbar suitable for isolator
S & F MCB TPN 100 Amps 415 volts.
S & F LED bulb 9 Watt complete all as specified
M&L for submain wiring with two RUNS of single core 6 sqmm for main wire and one run of single core 6 sqmm as earth wire of stranded copper conductor PVC insulated unsheathed cables drawn through and including concealed conduits in wall and necessary cutting and chassing for rigid PVC conduit ISI marked not less than 20 mm dia and all accessories complete all as specified & directed.
Supply & fix bakelite Hylem sheet 3mm thick of size 10"x12" superior quality, including cutting of sheet to fix switch socket & regulator, including unscrewing the existing switch, socket, regulator and fixing the same onnew sheet with new machine screw complete all as specified and directed.
All as per item no 190.00 but size 8"x10" complete all as specified and directed.
All as per item no 190.00 but size 8"x5" complete all as specified and directed.
M/s R.K. CONSTRUCTIONS
SARASWATI CONSTRUCTION CO
AAY KAY ENGINEERS
M/S Vinod Kumar
BHARAT ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .