REPAIR TO ROOF TREATMENT AND LEAKAGE SEEPAGE IN ZONE A AREA OF AGE BR I UNDER GE WEST LUCKNOW

Amount

Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing including taking down existing GI tubing complete all as specified and directed.

Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing including taking down existing GI tubing complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10 cm girth as in brick wall complete all as specified and directed.

S&F in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and laid in trenches or in floors complete all as specified and directed.

S&F in repair PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and laid in trenches or in floors complete all as specified and directed.

S&F in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and fixed to walls complete all as specified and directed.

S&F in repair PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and fixed to walls complete all as specified and directed.

S&F in repair cast iron sand cast soil, waste and vent pipe 100 mm bore in any length with or with out ears with cement joints fixed to wall complete all as specified

S&F in repair cast iron sand cast soil, waste and vent pipe 75 mm bore in any length with or with out ears with cement joints fixed to wall complete all as specified

S&F in repair cast iron sand cast soil, waste and vent pipe 100 mm bore in any length with or with out ears with cement joints laid in trenches or in floor complete all as specified

S&F in repair cast iron sand cast soil, waste and vent pipe 75 mm bore in any length with or with out ears with cement joints laid in trenches or in floor complete all as specified

S&F PVC (SWR) bend 110 mm dia, any radius complete all as required and as directed.

S&F PVC(SWR) junction 110 mm bore single (single T) equal or unequal complete all as specified and directed.

S&F PVC (SWR) bend 75 mm dia, any radius complete all as required and as directed.

S&F in repair 75 mm dia PVC (SWR) floor trap, with CP grating including jointing to waste pipe with solvent cement and fixed in cement concrete 1:2:4 type B1(using 20 mm graded stone aggregate) complete all as specified and directed.

S&F 100 mm bore CI bend(any radius), diminishing pieces or tapers (large bore measured) complete all as specified and directed.

S&F 100 mm bore CI bend(any radius), diminishing pieces or tapers (large bore measured) with oval access doors complete all as specified and directed.

S&F 75 mm bore CI bend(any radius), diminishing pieces or tapers (large bore measured) complete all as specified and directed.

S&F in repair 75 mm dia cast iron nahani trap, with CP grating including jointing to waste pipe and fixed in cement concrete 1:2:4 type B1(using 20 mm graded stone aggregate) complete all as specified and directed.

S&F in repair 100 mm dia cast iron nahani trap, with CP grating including jointing to waste pipe and fixed in cement concrete 1:2:4 type B1(using 20 mm graded stone aggregate) complete all as specified and directed.

S&F CI cowl 75 mm bore fixed with cement joint complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

S&F Stack clamps for 75 mm bore pipe made out of 50 mm x 5mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F Stack clamps for 100 mm bore pipe made out of 50 mm x 5mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F in repair bib taps, Brass, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in repair pillar taps, brass, with capston heads, fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair stop valve/angle valve 15 mm nominal bore brass, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F in repair stop valves 15 mm nominal bore, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in repir angle/stop cock, two way, 15 mm nominal bore cast copper alloy, chromium plated, fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F in repair Chromium plated shower rose with or without swivel joints 125mm dia with long arm including fixing to steel pipe or union complete all as specified and directed.

S&F in repair 15 mm dia chromium plated brass wall mixture with provision of overhead shower with 115 mm long bend pipe and wall flange screwed down for 15 mm bore GI pipe complete all as specified and directed.

S&F in repair 15 mm dia chromium plated brass central hole wash basin mixer (pillar tap) with accessories in wash basins for mixing hot and cold water, screwed down for 15 mm bore GI pipe complete all as specified and directed.

S&F in repair Viterous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) and including Plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device including CI 'P' or 'S' trap complete all as specified and directed.

S & F in repair fancy type chromium plated Soap dish 100mm size complete all as specified and directed.

S&F in repair toilet paper holder, CP box type fixed to wall with chromium plated brass screws and rawl plugs complete all as specified and directed.

S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed.

S&F in repair PVC low level white flushing cistern valveless syphonic action type 10 lts capacity with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend complete all as specified and directed.

S&F 15mm dia chromium plated brass washing jet fixed to water closet with 15mm dia and 1 m long flexible pipe with chromium plated spring type cover complete with fixing arrangement fancy look complete all as specified and directed.

S&F in repair hand shower (Health faucet) with 1 Mtr flexible tube, wall hook bracket etc, complete set of superior quality Make : Jagur or equivalent of Marc/ ESS-ESS/ Plumber complete all as specified and directed at site.

S&F in repair vitreous china wash hand basin white flat back size 550x400 mm including two Nos bracket, 32 mm dia brass CP waste coupling and waste pipe complete all as specified and directed.

M&L for cleaning the mouth of rain water pipe at terrace and grouting all around the mouth of pipe to get leak proof joint using CM 1:4 mixed with 3% water proofing compound by weight of cement. Note:- (a) Water proofing compound shall be measured and paid separately. (b) Area of grouting n. exc 0.1 sqm.

M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.

S&F in position rotational moulded polyethylene triple layered water storage tanks 500 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position with and including S&F ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) and dismatling of exisitng tank complete all as directed

S&F in position rotational moulded polyethylene triple layered water storage tanks 1000 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position with and including S&F ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) and dismatling of exisitng tank complete all as directed

S&F in repair ball valve 15 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 142 grams) complete all as specified and directed.

S&F in repair ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and directed.

S&F in repair 15 mm bore gun metal gate valve with iron wheel head, screwed both ends for iron pipe including testing complete all as specified and directed.

S&F in repair 20 mm bore gun metal gate valve with iron wheel head, screwed both ends for iron pipe including testing complete all as specified and directed.

S & F in repair PVC tank cover with locking arrangement for 500/1000 ltrs water tank complete all as specified and directed.

Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes exc 250 & n exc 500 ltrs and writing date of cleaning with synthetic enamel paint complete all as specified and directed.

Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes exc 500 & n exc 1000 ltrs and writing date of cleaning with synthetic enamel paint complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square or rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300 x 450 x 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10 mm thick in cement mortar 1:4 finished rough to fix tiles and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for brick work with fly ash bricks, old size, class designation 75, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 including demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for plain cement concrete 1:5:10 type E-2 (using 40mm graded stone aggregate) as in filling in sunken floorcomplete all as specified and directed.

Taking down cement or cement lime plaster on walls any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 using WPC as per manufacturer's instructions finished even and smooth without using extra cement complete all as specified and directed. (Water proofing compound shall be measured and paid for seperately under respective item of Schedule 'A').

Supply only integral water proofing compound(Powder) conforming to IS 2645 complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick on ceiling in cement mortar 1:3 including finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coats of cement base paint over a coat of primer on new surfaces of walls including preparation of surface complete all as specified and directed.

M&L for preparation of old surface of walls and applying one coat of cement base paint complete all as specified and directed.

M&L for complete removal of existing treatment on walls including scraping where ever required and applying a layer of wall putty base minimum 1 mm thick on scraped surfaced and applying two coat of oil bound distemper complete all as specified and directed.

M&L for preparation of new surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of old surface of wall and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for applying three coats of white wash on ceiling including preparation of new surface complete all as specified and directed.

M & L for preperation of surface of wall/chajja and applying a coat of tapecrete P-151/Cemcrete acrylic polymer modified cementitious slurry consisting of one part of TAPECRETE P-151/Cemcrete and two parts of cement by weight complete all as specified and directed.

Removal of vegetation growth n. exc 30cm girth from the bldg, around RCC/PVC tank/mumty, chajjas of any height including removal of its roots, branches and making good the disturbed surface in CM 1:4 complete all as specified and as directed.

M & L cement concrete type B-0 (1:2:4) (12.5mm graded stone aggregate) as in roof padding for levelling / maintaining slope etc complete all as specified and directed.

M & L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in roof kerbs, benching, coping, kneelers complete all as specified and directed.

M & L for providing water proofing treatment to sunken floors after removal of existing fittings, demolition of tiles/PCC and removal of filling from sunken portion all as given below :- (a) Making fillet of size 25mm x 25mm at corner of slab and wall with polymer modified cementitious (PMC) mortar consisting of one part of tapecrete P-151, two parts of cement and 6 parts of fine sand by weight. (b) Sealing of joints of pipe with epoxy putty CICO POXY LC or epoxy mortar CICO POXY 2125. (c) Cleaning the concrete surface by brushing & watering and applying a coat of tapecrete P-151 Acrylic Polymer Modified cementitious slurry consisting of one part of TAPECRETE P-151 and two parts of cement by weight. The coating shall be carried out upto 300mm above FFL and shall be allowed to dry for 4-6 hours. (d) Appying a coat of TAPECRETE brush topping 1.5mm thick consisting of one part of TAPECRETE P-151, two parts of cement and two parts of silica sand by weight and cured to 2 days. (e) Applying 15mm thick plaster in CM 1:4 mixed with CICO super @ 100ml per 50 Kg cement on treated surface.

M & L for provision of roof treatment with polymeric water proofing membrane all as given below :- (a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. (b) Applying a coat of bituminous primer conforming to IS : 3384-1986 @ 0.25 Iitres/sqm on prepared surface and allowed to dry. (c) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) M & L for cement concrete tiles 25 cm x 25 cm x 20-22mm thick, machine pressed, set, jointed and pointed in neat cement slurry as in floors/terraces over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M & L for provision of roof treatment with polymeric water proofing membrane all as given below :- (a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. (b) Applying a coat of bituminous primer conforming to IS : 3384-1986 @ 0.25 Iitres/sqm on prepared surface and allowed to dry. (c) Applying and laying 3mm thick APP membrane having non oven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) M & L for applying two coats of aluminium paint on membrane @ 0.10 Kg/Sqm (each coat) complete all as specified and directed.

M/S Reliance Construction