Providing canel Arrangement and supplying Operation materials for animal Birth control at Maruthuvar colony in srivilliputhur Municipality

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum (Data 2024-25, S.No 1)

Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. (Data 2024-25, S.No 2)

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification (Data 2024-25, S.No 5)

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38 (Data 2024-25, S.No 12)

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification (Data 2024-25, S.No 7)

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT (Data 2024-25, S.No 17)

Plastering with cement mortar 1: 5 mix 12mm thick including cost and conveyance all materials etc. complete asper standard specification. (Data 2024-25, S.No 21)

Supply and fixing of 100mm G I PIPES (MEDIUM) AS PER IS 1239/PART I/2004 including cost and conveyance of all materials and labour charges etc complete (TWAD 2024-25,P.NO 27, S.No: WD-M0492)

Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. (Data 2024-25, S.No 58)

supply and fixing of Weld Mesh 10 x 10cm 10 Gauge including cost and conveyance of all materials and labour charges etc complete (PWD 2024-25, P.No:24, S.No: M0193)

supply and fixing of Mild Steel Angles 25 x 25 x 3 mm including cost and conveyance of all materials and labour charges etc complete (PWD 2024-25, P.No:24, S.No: M0187)

Dadooring the walls with glazed square tiles of 150mmx150mmx6mm of the following colour set in cement Mortar 1:2 10mm thick and pointed with white cement @ 0.4Kg/m2 in all floors as directed etc., complete complete complying with standard specification (S.D.261A)

Flooring with Cuddapah slabs of 40mm thick over a base mortar in CM 1:3 (One Cement and Three Plastering Sand (P - Sand)) 20 mm thick and pointed with cement mortar 1:3 ( one cement and three Plastering sand) usimg Black oxide complying with standard specification (P & D data 53) (Data 2024-25, S.No48)

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. (Data2024-25, S.No:27)

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. (Data2024-25, S.No:51)

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.(Data2024-25, S.No:53)

Supplying and fixing in position best quality 110mm P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitary fittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications.(Data2024-25, S.No 84)

Supplying of following pipes and special including cost and conveyance all materials etc. complete 32mm PVC Pipe (Data 2024-25, S.No: 73)

32mm PVC Coupler (PWD 2024-25,P.No 147, S.no M-0883)

32mm PVC Tee (PWD 2024-25,P.No 147, S.no M-0901)

32mm PVC Ellbow (PWD 2024-25,P.No 147, S.no M-0889)

25 mm PVC Pipe (Data 2024-25, S.No: 73)

25 mm PVC Coupler (PWD 2024-25,P.No 147, S.no M-0882)

25mm PVC Tee (PWD 2024-25,P.No 147, S.no M-0900)

25mm PVC Ellbow (PWD 2024-25,P.No 147, S.no M-0888)

25mm G.M GATE VALVES AS PER IS BS 5154 and related IS Specifications (Data 2024-25, S.No:78)

SS Elbow Action Tap of size 15mm (PWD 2024-25,P.No 89, S.no WD-M-0541)

110mm PVC Couplers fabricated 6 KSC (TWAD 2024-25, P.No:10, S.No: WD.M0106)

110mm PVC Equal Tee Fabricated BIS 10124 /1982 PartV 6 KSC (TWAD 2024-25, P.No:10, S.No: WD.M0110)

110mm PVC Equal tee (Mould) BIS 7834/1975 (TWAD 2024-25, P.No:10, S.No: WD.M0113)

PVC Adhesive (Solution) (PWD 2024-25,P.No 87, S.no: M-0519)

Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (4 points per coil). (Ele 2024-25 SD 17)

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp(S D 110)

Supply and fixing of 20W 4 Feet LED Fitting with LED including cost and conveyance of all materials and labour charges etc complete ( Sor 2024-25P.No168,S.No:M1273)

supply and fixing of 30W LED street light fitting with LED (Higher end) with 25 mm dia. GI pipe (class B) with 1 no. 25 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting . (Ele Data 2024-25, P.No:198, SD 445)

Wiring with 2 x 1.5 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113 mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC plug point (Ele Data 2024-25, P.No:21, SD 36)

Supply and fixing of 375 mm (15") sweep (light duty) AC exhaust fan complete with necessary wall opening and making of the wall (Ele Data 2024-25, P.No:53, SD 117)

Supplying and fixing of Surgical Crab Wash basin including all labour charges etc complete as per standard specifications (Quatation)

Supplying of General Table including all labour charges etc complete as per standard specifications (Quatation)

Supplying of Chair including all labour charges etc complete as per standard specifications (Quatation)

Supplying of Incinerator for Ladies Bathroom including all labour charges etc complete as per standard specifications (PWD 2024-25, Page No:117, S.No:M0717)

Supplying of Weighing Machine including all labour charges etc complete as per standard specifications (Quatation)

Supplying of Fridge including all labour charges etc complete as per standard specifications (Quatation)

Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections. (Data-1 2024-25, S.No 103)

SUPPLY & INSTALLATION OF AIR-CONDITIONER WITHCOPPER COIL 1.5 TR Split Type AC Unit - 5 Star Rated inculding all cost etc complete (Sor 2024-25,P.No 247, S.No M-2654)

Basin Large

Basin Small

Dressing Bin ss 11

Mayos Scissor 6'

SS TRAY 12' x 10'

table sheet

Autoclave Alum Ele

Kidney Tray

Alies Forceps 6"

Artery 6" STR

Needle Holder 6"

Spay Hook

Toothed Forceps 6'

instrument trolley

Autoclave Signolog

Dog Catching Butterfly

Dog Catching Grasp

Surgical Hydraulic Table

OT LED Light

BP Handle no 3

BP Handle no 4

Scissor Straight 4 inch

Scissor Curved 4 inch

Mayos Scissor 4 inch

Allis Tissue Forceps 4 inch

Artery Forceps Curved 4 inch

Needle Holder 4 inch

Artery Forceps Stright 4 inch

Mosquito Forceps Curved

Mosquito Forceps Stright

Towel Clips

Spay Hook

Weight Scale Digital

Autoclave Tape

OT Light

SS TRAY 12' x 10'

IV Stand PC

Kidney Tray ss

Scissor 4 inch

instrument tray

UV Lamp

SUPPLY & INSTALLATION OF CCTV Arrangements inculding all cost etc complete (Sor 2024-25,P.No 247, S.No M-2654)

kavitha (BID ID -1390891)