Loading
Loading…
Loading…
Tender Value
₹2.0 Cr
EMD Value
₹2.5 L
Closing Date
2 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
S AND T
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N OR 'V' which ever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
The balance sheet and all other financial documents attested/certified by the Chartered Accountant (CA) to substantiate fulfilment of Financial Eligibility Criteria should be with UDIN (Unique Document Identification Number), failing which the offer shall be considered as incomplete and will be summarily rejected without any further reference. Ref: GM (ENGG) HJP letter No- ECR-HQ0ENGG(CONT)0009/2025Dtd 18.11.2025)
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited 1) Three similar works each costing not less than the amount equal to 30% of advertised value of tender,or 2)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or 3)One similar work costing not less than the amount equal to 60% of advertised value of the tender. In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity
Similar nature of work - Any work involving outdoor or Indoor signaling work. Signaling Work- All works which are directly related to the interlocking of the Core Signaling System. OR Any MACLS work involving outdoor & indoor work or alteration in existing indoor/outdoor signaling system OR Any work involving outdoor/indoor signaling works including MACLS/EI/PI/RRI/IBS/IBH/LC Gate/DAC/ELD and ELD for signaling cable , Quad Cable, Fuse Auto Change Over System etc. Ref: (ECR/HJP letter No- ECR-HQ0SnT(SNW)/1/2020 (Computer no- 81849) Dtd 14.10.2025)
26 conditions · 6 needing a document upload
The tenderer whether sole proprietor, a company or a partnership firm / joint venture (JV) / registered society / registered trust etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person specifically authorizing him/them to submit the tender, sign the agreement, receive money, co-ordinate measurements through contractor's authorized engineer, witness measurements, sign measurement books, compromise, settle, relinquish any claim(s) preferred by the firm andThe tenderer whether sole proprietor, a company or a partnership firm / joint venture (JV) / registered society / registered trust etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person specifically authorizing him/them to submit the tender, sign the agreement, receive money, co-ordinate measurements through contractor's authorized engineer, witness measurements, sign measurement books, compromise, settle, relinquish any claim(s) preferred by the firm and sign "No Claim Certificate" and refer all or any disputes to arbitration. sign "No Claim Certificate" and refer all or any disputes to arbitration.
Contractors are allowed to make payments against this tender towards bid security only through only payment modes available on IREPS portal like net banking, debit card, credit card etc. Manual payments through Demand draft, Banker cheque, Deposit receipts, FDR etc. are not allowed. The firm can also submit Bid security in the form of Bank guarantee Bond from a scheduled commercial Bank
If the bidders opt for submission of Bank Guarantee towards Bid security, the original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids (i.e. excluding the last date of submission of bids) (As Per Rly. Bds Letter No. 2022/CE-I/CT/GCC-2022/Policy dated 20.10.203, Advance Correction Slip No. 5).
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / company / Joint Venture (JV) / Registered Society / Registered Trust etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (ii) In case tenderer is other than sole proprietorship firm, following documents shall be submitted by the tenderer: (a) Partnership Firm: The tenderer shall submit (i) a notarized copy of Partnership Deed or a copy of partnership deed registered with the registrar. (ii) a copy of Power of Attorney (duly registered as per prevailing law) in favour of an individual to sign the tender documents and create liability against the Firm. (b) Joint Venture (JV): The tenderer shall submit documents as mentioned in Clause 17 of the Tender Form (Second Sheet). (c) Company registered under Companies Act-2013: The tenderer shall submit (i) the copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company; and (ii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (d) LLP (Limited Liability Partnership) Firm: If the tender is submitted on behalf of a LLP Firm registered under LLP Act-2008, the tenderer shall submit alongwith the tender- (i) a copy of LLP Agreement, (ii) a copy of Certificate of Incorporation; and (iii) a copy of Power of Attorney/Authorisation issued by the LLP Firm in favour of the individual to sign the tender on behalf of the LLP Firm and create liability against the Firm. (e) Registered Society & Registered Trust: The tenderer shall submit (i) a copy of the Certificate of Registration, (ii) Deed of Formation; and (iii) a copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iii) If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender. (iv) After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society etc. shall be neither asked nor considered, if submitted. (v) A tender from JV / Partnership firm etc. shall be considered only where permissible as per the tender conditions. (vi) The Railway will not be bound by any change in the composition of the firm made subsequent to the submission of tender. Railway may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The Tenderers are required to scrutinize carefully all clauses appearing in the Tender documents before uploading their bid
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the Railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the Railway there under
In case of any information submitted by tenderer is found to be false forged or incorrect after the award of contract, the contract shall be terminated. Performance Guarantee and Security Deposit available with the railway shall be forfeited. In addition, other dues of the contractor, if any, under this contract shall be forfeited and agency shall be banned for doing business for a period of up to two years
Railways reserves its right to either cancel the tender or reject any or all the tenders without assigning any reasons thereof
General Conditions of the Contract (GCC), April 2022 with latest amendment/ correction slips is applicable and final authority for this contract in case of any conflict or confusion. The contract shall be governed by the provision of Indian Railways Standard General Conditions of Contract-2022 (Latest) with correction slips up to the date of uploading of tender.
The firm must entry of details of numbers of engaged labours ( skilled or unskilled) , ESIC & PF deduction if applicable) , must be updated on IR- Shramik Kalyan portal at the time of execution of work. Without uploading of these documents running bill of concerned period will not be processed.
Firm must submit details of Graduate/diploma engineers or equivalent employed by the firm against this work with relevant certificate within two weeks of issue of LOA/before making of agreement Other wise any bill will not be process and LD will be imposed as described in tender Document.
No payment will be initiated till all the conditions regarding Payment of Wages act & Minimum Wages act in terms of clause 54 and 55 of Indian Railways General Condition of Contract. It shall be mandatory upon the contractor to ensure correct and prompt uploading of all salient details of engaged contractual labour & real payments made thereof after each wage period on Shramik Kalyan portal.
Item wise inspection clause has been given in the schedule . However, modification may be done at the time of issue of LOA.
The firm must follow the instructions regarding precaution taken during trenching/digging work which is mentioned in the JPO issued dated 21.05.2024. The JPO has been attached in Tender document.
It is mandatory to followed provisions under Make in India policy 2017 issued by Govt. of India, as amended from time to time.
Rehabilitation and restoration of S&T gear for safety in train operation at Fazalchak and Top Sarthua station in JTDM-DHWN section under danapur division.
DNRSnTSig2026-2~ECR
DNRSnTSig2026-2
Open
Works - General
6 Months
Patna, Bihar
₹0
₹2.5 L
2 Mar 2026
7 Feb 2026
16 Feb 2026
68 items across 2 schedules · ₹18,84,261.02 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Excavation of trench in all kinds of soil and refilling of trenches (1.0 Mtr. Depth 300 mm width)- Without bricks | Metre 5000.00 | — | 9 | 45,000 |
| 2 | Excavation, trenching, earth work and reinstatement of track while track crossisng. | Metre 50.00 | — | 35 | 1,750 |
| 3 | Reinstatement of platform and repairing to orginal state after cable laying work. | Metre 100.00 | — | 100 | 10,000 |
| 4 | Laying cable of different sizes as per cable route plan approved by Railway and meggering of all main & tail cables as per technical specification of tender.- 2 core to 12 core signalling cable. | Kilometre 25.00 | — | 2,900 | 72,500 |
| 5 | Laying cable of different sizes as per cable route plan approved by Railway and meggering of all main & tail cables as per technical specification of tender.- Telecom Cable -Quad cable | Kilometre 5.00 | — | 3,000 | 15,000 |
| 6 | Supply and fixing of G.I. Pipe with threaded collars of 100 mm nominal bore specn.No.IS 1239 medium grade. Perforated of required length on bridge/below metalled road/L- Xing/Culvert as per technical specification of tender.- Supply portion for the G.I.Pipe & collars. Inspection Consignee | Metre 100.00 | — | 335 | 33,500 |
| 7 | Supply and fixing of G.I. Pipe with threaded collars of 100 mm nominal bore specn.No.IS 1239 medium grade. Perforated of required length on bridge/below metalled road/L- Xing/Culvert as per technical specification of tender.-Execution with remaining miscelleneous materials | Metre 100.00 | — | 15 | 1,500 |
| 8 | Installation,erection and wiring of CLS including laying out of tail cable from location box and earthing of CLS as per technical specn.In the tender.- 3 Aspect CLS | Numbers 8.00 | — | 850 | 6,800 |
| 9 | Installation,erection and wiring of CLS including laying out of tail cable from location box and earthing of CLS as per technical specn.In the tender.- 2 Aspect CLS | Numbers 16.00 | — | 750 | 12,000 |
| 10 | Installation, Erection and wiring of direction type route indicator.- 2 Way | Numbers 4.00 | — | 500 | 2,000 |
| 11 | Installation, Erection laying out of tail cable from Loc. Box and wiring of Shunt Signal- independent position light shunt signal | Numbers 5.00 | — | 200 | 1,000 |
| 12 | Installation, Erection laying out of tail cable from Loc. Box and wiring of Shunt Signal- On offset bracket | Numbers 10.00 | — | 200 | 2,000 |
| 13 | Installation,Erection & laying out of tail cable from loc.box and wiring of Calling On signal on same post below main signal as per technical specification in the tender. | Numbers 2.00 | — | 200 | 400 |
| 14 | Supply of PBT ARA terminal as per IRS SPECN No. IRS:S-75-91- 6 way Inspection RDSO | Numbers 200.00 | — | 220 | 44,000 |
| 15 | Supply of Bakelite Strip/Sheet of Size (950 x 75 x 12) mm. For fixing 30Nos. ARA terminals/ Fuse base terminals/Fuse base. Inspection Consignee | Numbers 100.00 | — | 160 | 16,000 |
| 16 | Casting,Concreting and Curing of foundation and erection for full apparatus case (GKP-type)as per DRG No.SGW/MGS/L1/91 includong cost of all materials required for fixing holding down bolts, casting, concreting and fixing of "E" type lock.- Note: i)The contractor will provide holding down bolts. ii)Bottom of appratus cases should be filled with sand and the top surface covered with masonry work and neat cementing. | Numbers 10.00 | — | 1,550 | 15,500 |
| 17 | Casting,Concreting and Curing of foundation and erection for Half apparatus case(GKP- type) as per DRG No.SGW/MGS/L1/91 including cost of all materials required for fixing holding down bolts,casting concreting and fixing of E type lock. Note: i)The contractor will provide holding down bolts. ii) Bottom of appratus cases should be filled with sand and the top surface covered with masonry work and neat cementing. | Numbers 5.00 | — | 1,275 | 6,375 |
| 18 | Fixing,wiring of terminal strips,bakelite strip, transformers, relays fuses with base and supply and fixing of shelves for full appratus case. (All materials except transformers,relay,terminal strips, bakelite strip and fuses with base to be spplied by the contractor.). | Job 10.00 | — | 1,450 | 14,500 |
| 19 | Fixing,wiring of terminal strips, bakelite strip, transformers, relays, fuses with base and supply and fixing of shelves for half apparatus case n. (Materials other than transformers,relay,terminal strips, bakelite strip and fuses with base to be supplied by the contractor.) | Job 5.00 | — | 850 | 4,250 |
| 20 | Supply of B-Type choke coil having anneled enamelled copper wire for DC track circuit SPEC .No.IRS-S-65/ 83(Latest) Inspection RDSO | Numbers 50.00 | — | 1,900 | 95,000 |
| 21 | Supply of PBT fuse block with inserts cartridge type, to be mounted inside the location Box/ Relay Rack.- Fuses (2A,IRS:S-78/92) Inspection RDSO | Numbers 200.00 | — | 27 | 5,400 |
| 22 | Supply of PBT fuse block with inserts cartridge type, to be mounted inside the location Box/ Relay Rack.-Fuse Base (DRG No.SA-23748,IRS:S- 75/91) Inspection RDSO | Numbers 200.00 | — | 80 | 16,000 |
| 23 | Supply of PVC/PE insulated (2 mm minimum) stranded flexible galvanised wire of size 7/ 1.63 mm for track jumpers as per Spec.IS - 214C/ 62 and wrapping test as per clause 14 of IRS - S3 (Max. electrical resistance 12 ohm/Km. At 20 degree celcius with electrically insulating PVC extruded jacket 2 mm (Min.) thickness. Inspection Consignee | Kilometre 2.00 | — | 16,000 | 32,000 |
| 24 | Supply of 8 SWG soft drawn GI wire bond pieces (1320x4)mm. Resistance upto 19.5 OHM/MT.To IS-280 & IS - 23. Inspection Consignee | Numbers 500.00 | — | 4 | 2,000 |
| 25 | Supply of channel Pin with single groove 7.2 mm Dia for 4 mm Dia bond wire to DRG.No.S-69/M & IRS Specn.IRS:S-S17. Inspection Consignee | Numbers 5000.00 | — | 1.8 | 9,000 |
| 26 | Installation wiring,testing and commissioning of Single/Double rail DC track circuit as per approved track circuiting plan.The work includes track battery charging and installation,track bonding (double) with 8 SWG soft GI Wire laying of tail cable with track lead junction box,rail connector with Galvanised iron wire track jumpering with supporting arrangement.- Track Circuit (Beyond 200 Mtrs.) | Numbers 4.00 | — | 1,100 | 4,400 |
| 27 | Installation wiring,testing and commissioning of Single/Double rail DC track circuit as per approved track circuiting plan.The work includes track battery charging and installation,track bonding (double) with 8 SWG soft GI Wire laying of tail cable with track lead junction box,rail connector with Galvanised iron wire track jumpering with supporting arrangement.- Short length track circuit upto 200 Mts. | Numbers 10.00 | — | 1,100 | 11,000 |
| 28 | Installation wiring,testing and commissioning of track circuit involving points & crossing as per Track circuiting plan.Track Battery charging and installation including drilling 9/32'' hole on rails. Installation of bonding,double with 8 SWG soft GI Wire insulation of strecher bars (leading &following) ,guage/crossing tie plates involving cutting & rivetting/welding of angle clit,split stracher bars,fixing of track lead junction boxes.Laying of tail cable | Numbers 16.00 | — | 1,100 | 17,600 |
| 29 | Supply of point JB fitted with 18 Nos. 1 way ARA PBT terminal block conforming to IRS - S- 75/91 with 3 Nos. of 40mm Bore. GI pipe 600 mm long as per DRG No.SGW/MGS/PT4/91 fixed on hard wood plank with U-channel (75 x 40 x 1500) mm for fixing. Point JB (Inspection Consignee, ARA- RDSO ) | Numbers 18.00 | — | 1,150 | 20,700 |
| 30 | Dismantling of existing point fitings and installation of already prepared and matched point fitting sets for point machine of IRS 24/90 type with final testing and commissioning from panel as per technical specification including transportation from railway store. - Turn out (Facing point layout) | Numbers 18.00 | — | 3,000 | 54,000 |
| 31 | Supply of lead acid secondary cell to IS-1651 or, Latest.and RDSO letter No.STS/E/Cells/Secondary with intercell connectors,level indicator,porcelain insulator,for mounting and ceramic vent plug.- 80 AH Inspection RDSO | Numbers 160.00 | — | 1,400 | 2,24,000 |
| 32 | Charging of lead acid secondary cells of various capacities as per manufactures instruction/railway engineer's instructions acid & distilled water will be suppled by the contractor.- 80 AH (12 Cell) | Set 14.00 | — | 1,800 | 25,200 |
| 33 | Supply of CT rack (DRG.N0.S&T/C-19/2001/ER) complete with all fittings including 6 way terminals or wago terminal as per Spec.No.IRS- 79/92. Inspection Consignee | Numbers 2.00 | — | 15,000 | 30,000 |
| 34 | Installation of cable termination Rack with scaffolding materials;ladder for supporting outdoor cable;wire guide;complete with other necessary hardwares as per requirements of Rly. & erection materials.(Rate & Staion Wise Qty. to be specified by the tendererer.)- Upto 4 to 5 Line Station | Station 2.00 | — | 1,500 | 3,000 |
| 35 | Supply of earth electrode.Materials to be procured as per E.Rly Sketch No.SGW/T/3/G/8/89. Inspection Consignee | Numbers 100.00 | — | 500 | 50,000 |
| 36 | Supply of electrical key transmitter for crank handle interlocking arrangement siding control, LC Gate control. Inspection RDSO | Numbers 10.00 | — | 2,500 | 25,000 |
| 37 | Installation of electrical key transmitter on suitable bracket as per inspection of site engineer. ,wiring and testing of electrical key transmitter. | Numbers 10.00 | — | 3,880 | 38,800 |
| 38 | Testing & commissioning of station installed as a whole,Testing shall be carried out by the engineer in charge of work with the help of representative of contractor to ensure compliance of SEM,RE manual & Tender Specification.- Up to 5 Line station | Station 2.00 | — | 38,800 | 77,600 |
| Schedule total | ₹10,44,775 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .