GE (N) P/TOKEN- 17 OF 2026-2027 REPAIRS TO JOINERY FLOORING,PLUMBING AND FIXTURES AT GHORPADI OFFRS/JCOS/OR PIONEER UNIT DMSA, SCIB, STN CELL SSTA SWAC (MD/OTM ACCN) OTHER VARIOUS NEAR BY LOCATIONS IN THE AREA OF AGE B/R (E) UNDER GE (N) PUNE

M&L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement including taking down existing plaster with two coats of exterior acrylic emulsion paint over a coat of primer on new surface all as specified.

M & L for Rendering dubbing coat over damaged irregular surface of chajjas roof projections ceiling facia etc average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even& rough including making of drip course as reqd complete including roughening surface of old concrete by picking sweeping clean and washing with water all as specified. Note :Rate for form work shall be deemed to be included in the rate quoted by the contractor.

M&L for rendering or plastering work 10mm thick in CM 1:3 in fascia or edging of Chajjas, ceiling and roof projections etc, including taking out pealed off plaster / concrete and making the line in true shape and finishing the surface without using extra cement including applying two coats of exterior acrylic emulsion paint over a coat of primer for facia, chajja, and roof projection etc all as directed by Engr-in-Charge..

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches,pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

M&L for pre-cast cement concrete block masonry with solid blocks exc. 10 cm in width, type C-1,1:3:6 (using 20mm graded agg) and setting in cement mortar 1:6 complete all as directed

M&L Fly ash brick work using old size bricks, straight or curved on plan exc 6m mean radius built in CM1:6,complete all as specified and directed.

M & L for Providing precast cement concrete, PCC 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate), as in louvres and jallies, 25mm thick (measured solid), including all mouldings, set in CM 1:4 complete all as specified & directed.

M & L for Reinforced cement concrete (nominal mix) 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregates as in coping of walls, canopies, and in the shelves and the like incl form work complete all as specified & directed.

M & L for Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips all as specified & directed.

M&L for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement , with two coats of exterior acrylic emulsion paint over a coat of primer on new surface all as specified.