SITC of air-conditioning system.

Amount

Supply, Installation, Testing and Commissioning of Microprocessor based air cooled 16.5 TR Floor mounted ductable type Split Air Conditioner with R407C/R410A/R32 Gas and Run-Time Equalisation of compressor & variable speed condenser fan motor having nominal cooling capacity of 198000 BTU/hr. with multiple Scroll Compressor, Air Flow 6600 CFM @10 mm Static, Condenser make as per OEM standard, Noise Level Highest (IDU) : 35 dBA at ISI condition suitable for operation on 415 V, + 5% - 50 Hz. - 3 Ph AC supply [Make: Hitachi / Carrier / Daikin].

Supplying & laying of Copper refrigeration pipe line (Make: Rajco / Royko / Mandev) for liquid and suction line with hard drawn copper piping complete with fittings, elbows, bends, supporting arrangement on walls as follows:-

28.12 mm dia with minimum thickness 1.15 mm

22.2 mm dia with minimum thickness 0.9 mm

12.5 mm dia with minimum thickness 0.9 mm

Supply & Fixing of 13 mm thick Nitrile Rubber tube insulation on Suction Copper Pipe Line (Make: Armacell / K Flex / Vedio Flex).

Supply, fabrication, installation, testing & commissioning of following gauges for supply/ return Air Duct complete with, supports and turning vanes.

Supply and installation of fusible link fire Damper. (Make:-Systemair/ Dynacraft /Premier/Air enterprise).

Fire redundant Flexible double canvass connections for packaged air conditioners.

Supply and installation of aluminium powder Coated Supply air Diffuser/ Grilles with VCD (Make: Ravi Star / Dynacraft / Caryaire).

Supply and installation of aluminium powder Coated Supply air Diffuser/ Grilles without VCD (Make: Ravi Star / Dynacraft / Caryaire).

Thermal Duct Insulation with 13 mm thickness with fire redundant Al foil faced closed nitrile rubber insulation on duct with necessary pasting (Make - Acoflex / Araflex/ Supreme).

Acoustic lining of duct work with 12mm thick having density 48 Kg /mtr³ rigid board inside with 300 fiber glass RP tissue & 36 G Al perforated sheet with necessary accessories initially fastened, covered. Acoustic lining shall be rigid board.(Make- Twiga)

Supply and installation of following Cable (Make - Finolex / Havells / Polycab / Universal) for Power supply and Control on wall/existing GI Tray as per direction of EIC.

a) 1.1 Kv. Gr. 4 Core 25 Sq. mm Armoured Aluminium cable for 16.5TR Ductable split AC machine.

b) 1.1 Kv. Gr. 3 Core 2.5 Sq. mm Copper Cable for Control.

Supply and Laying of 2 X 8 SWG earthing Wire on wall/existing GI Tray as per direction of EIC.

Supply and installation 32 mm Dia UPVC pipe (Supreme / Oriplast) for Drain with 9 mm thick Class O fire rated nitrile rubber insulation (Make: Armacell / K Flex / Vedio Flex).

Supply installation of VI pad for ODU Unit.

Supplying & fixing of 19 mm thick Aluminium foil faced Thermal insulation class "O" Nitrile rubber with necessary pasting be good qualities adhesive. Proper arrangement to be done for fixing by aluminium clad and other accessories. The work including supplying the above and fixing the same below the ceiling with the help of aluminium clad and nut as per direction of Engineer-in-charge.

Misc. work like cutting of holes of brick wall and mending good the same and any other work related to complete the entire commissioning of Airconditioning system.

Supply, fabrication & fixing of MS structure for all side guarding arrangement of outdoor unit making with 35x35x5 mm angle iron, 35x5 mm flat iron frame, one side hinge type door, one set has bolt for locking arrangement and painting with two coats of aluminium paint over one coat of RO primer. Gap of each member of Angle iron and Flat iron not more than 4 inch and minimum clearance of the structure with the outdoor unit should be 6 inch.

Terms and condition

The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them.

Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/submission of bill.

If any refurbished material is supplied and installed, penal action will be taken as per existing rules

Defect Liability period 1 (One) Year

SKY DECORATIONS PRIVATE LIMITED

Lyric International