PROVN OF FOOTPATH FROM GEN AREA NEAR BLDG NO P/121 TO GEN AREA, PROVN OF HARDSTANDING IN EXISTING B VEH PARKING SHED AND OTHER CONNECTED WORK AND PROVN OF TURBO EXHAUST FAN IN OTM SHELTERS AT PMS

Amount

Surface excavation n.exc (Not exceeding) 30 cm deep and averging 15 cm deep and getting out soft/loose soil complete all as spd and directed.

Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as spd and directed.

M&L for moorum/red bajri/clinker filling in floor or pavings, laid in layers n.exc 15cm thick ,spread,watering ,ramming and compacted complete all as directed by Engg-in-charge .

M&L for broken stone/boulders hard core gauge n.exc 63mm deposited, spred and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces complete all as spd and directed.

M & L for PCC (1:4:8) Type D2 using 40 mm graded crushed stone aggregate used as in sub base floor/pavings and finishing complete all as specified and as directed.

M&Lfor factory made precast kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified as directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as spd and as directed.

Material and labour for machine pressed precast concrete interlocking paver coloured block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as spd and as directed.

M&L for 100mm thick PCC 1:4:8, type D2 (using 40 mm graded crushed stone aggregate) as in sub base floor complete all as specified and directed.

M&L 100 mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in hardstanding laid in panels with and including use and waste of formwork and to divide the area in panels and finishing the surface fair and even complete all as specified and directed.

M&Lfor forming contraction (Dummy) joints 30mm deep and 10mm wide filled with sealing compound Gde 'A' complete all as specified and directed.

M&L for forming construction joint 100mm deep x 10mm wide filled with sealing compound, Grade 'B' for 100mm thick slab complete all as specified and as directed.

M&L Plain Cement concrete 1:3:6, type C-1(using 20mm graded crushed stone aggregate) in surface channels and drains and Manholes complete all as specified and directed.

M&L for forming 40 cm inner girth fair finished drains or channels i.e. exc 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

M&L for forming 30 cm inner girth fair finished drains or channels i.e. exc 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L, Brickwork with fly ash bricks, old size straight or curved on plan exc 6m mean radius, built in CM 1:6 complete, all as specified and as directed.

M&L for Providing cement concrete type B-0, 1:2:4 (12.5mm grades aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc including frames (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar 1:4 complete with joints to match complete all as spd and directed.

M & L for rendering 20mm thick in CM (1:4) in two layers (8mm thick in CM (1:4) with and including approved water proofing compound as per manufacturing instraction over backing coat of 12mm thick in CM (1:4)) on brick work or concrete surfaces finished fair & even.

M&L, for preparation of concrete kerb stone or plaster surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint overr one coat of priming paints plaster coat complete all as specified and directed.

S&F PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed .

Supplying and laying of Eco drain Hi-tech pipe drainage pipe bearing 160 mm dia minimum thickness of pipe 4mm thick of pressure rating SN 4KN/Sqm laid in tranches and joined with cement solvent including jointing with couplar ,bend tee as per site requirement complete all as specified and directed.

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600mm height duly powder coated and thermo complete all as spd and directed.

S&F Turbo ventilator SS built with vane thickness 0.9mm with ball bearings, turbine dia 760mm with bottom ring dia 600mm, FRP base plate 2mm thick clear 1.02 mtr wide and 1.65m long matching the profile of existing sheet, weight approx 8.0 Kg complete all as per manufacturer instructions and as directed

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts etc using Fe-410-W (Gde-E-250) quality-A complete all as directed

GALSI DEVELOPERS PVT LTD (BID ID -3475431)