Mtc. of Residential Buildings at 400KV S/Stn. BBMB Panipat

Amount

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled.

(a) Doors of area 3 sqm and below.

(b) Windows of area 3 sqm and below

Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge.

(a) Eurpoean/Indian/Orissa W.C.,

(b) PVC / China Ware Cistern

(d) Stainless Steel Sink /Mosaic Sink

Providing & fixing factory made Solid PVC Chowkhat Door frame of the size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm PVC foam sheet, mitre cut at 2 corners & joined with 2Nos of 150mm long brackets of 15 x 15mm M.S square tube. the two vertical doors profiles are to be reinforced with 19 x 19mm M.S square tube of 19 guage, the door framed shall be fixed to the wall using 65/100mm long M.S screws through the frame by using fasteners. a minimum of 4 nos of screws to be provided for each vertical member & minimum 2nos for horizontal member etc. as per manufacturer's specification,conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge.

Providing & fixing 30mm thick Factory Made solid Panel PVC Door shutter (Pannel thickness 5mm) Consisting of frame made out of M.S tubes of 19 guage thickness and size of 19mm x 19mm for styles & 15mm x 15mm for top & bottom rails. M.S frame shall have a coat of steel primers of approved make & manufacture. M.S frame shall be covered with 5mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming styles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panneling of 5mm thick PVC sheet to be fitted in the M.S Frame welded/Sealed to the styles & Rails with 30mm wide x 5mm thick PVC sheet beading on either side and joined together with solvent cement adhesive.an additional 5mm thick PVC strips of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent cement adhesive etc. complete as per manufacturer's specification, conforming to test criteria specified in IS:40201998, Drawings and to the entire satisfaction of engineer-in-charge.

Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete.(c ) Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter.

Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter.

(b) Doors and windows frame of size 113mm x 60mm with 35 mm wide single rebate weighing 3.38 kg per meter

Hollock wood cup board shutter with plywood panels or faced on both side fixed in position (excluding the cost of handles, bolts hasp with staple but including the labour for fixing them)a) 30 mm thick

Wire gauze door shutter with Kail wood without springs housed in chowkats (Single Leaf)a ) 35 mm thick

Kail wood doors shutter and window shutter panelled, glazed or glazed and panelled including hinges screws chokes cleats and cords etc. complete Fixed in position (Single Leaf)(b) 35mm thick

Dismantling brick work tile, masonry or tile lining(b) In cement

Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect.

Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect.

Scraping (c) Cement plaster

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/ Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing and fixing jet spray with 2'-6" long PVC pipe.a) With C.P. Brass nut

Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects.

Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect.

Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.

Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge.

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt)(ii) For shutter area above 0.50 sqm

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

12.5 mm thick cement plaster 1:5

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B?Class including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete.15mm i/d

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge ) complete in all respect.PTMT Tap/Bib cock

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge ) complete in all respect.Brass Bib cock/ Stop cock 15mm x 400gm

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect.(ii) Size 550 mm x 400 mm x 815 mm

Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect

Providing and fixing PVC Cistern 10 Ltr. Capacity ISI marked IS 7231:1994( size 32.5x47.6x15.5 cm) of approved make(to the approval of the Engineer-in-charge) including PVC fittings complete.

SUPPLY AND ERECTION OF WIRING ACCESSORIES:- Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:-

One Way 6amp. Switch Flush Piano type

Single Pole 16/20amp. Switch with indicator Flush Piano type

5pin 6amp. Wall Socket Flush Piano type

16amp. Universal Wall Socket Flush Piano type

Step type Fan Regulator Flush Piano type (Switch size)

Ceiling Rose (Flush Piano type)

Bakelite Batten Holder (Large size)

Dismantling concrete (d) (d) Cement concrete plain1:2:4 mix

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth

Earth work excavation in ordinary soil, exclusive of compensation of earth:-(a) Kassi work undressed involving an average horizontal throw up to 2.0 metres and an average vertical lift up to 0.5 metres including breaking of clods

Providing and laying water proofing treatmentin sunken portion of WCs, bathroom etc., byapplying cement slurry mixed with waterproofing cement compound consisting ofapplying : a) First layer of slurry of cement @0.488 kg /sqm mixed with water proofing cement compound @ 0.253 kg/sqm. Thislayer will be allowed to air cure for 4 hours. b)Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cementcompound @ 0.126 kg/ sqm. This layer will beallowed to air cure for 4 hours followed withwater curing for 48 hours. The rate includespreparation of surface, treatment and sealingof all joints, corners, junctions of pipes andmasonry with polymer mixed slurry.

Providing and fixing in position SWR UPVCspecial for soil waste vent or anti syphonagepipes as per as per IS - 14735 includingcutting and wastage etc. cutting holes in wallsroofs or floors etc. and making good to itsoriginal condition but excluding cost of leadjoining. (B) For 110mm o/d pipes (ix) P Trap/ Floor Trap 110mm x 110mm

Providing and fixing in position SWR UPVCspecial for soil waste vent or anti siphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. (B) For 110mm o/d pipes (x) P Trap/Floor Trap 110mm x 75mm

Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. (a) 110mm o/d pipe

Providing, Laying , fixing & jointing of P.V.C.Pipes as per ISI-4985 (ISI marked with theprior approval of Engineer-in-Charge) alongthe Trenches and laying the same inTrenches to correct alignment and gradients,cutting, jointing and testing complete as perspecifications. (ii) 75mm o/d pipe of 10 Kgf. / sqcm

Providing and fixing in position SWR UPVCspecial for soil waste vent or anti syphonagepipes as per as per IS - 14735 includingcutting and wastage etc. cutting holes in wallsroofs or floors etc. and making good to its original condition but excluding cost of leadjoining. (b) For 110mm o/d pipes (v) Elbow 90 Degree (All side socketed)

Earth filling(a) (i) Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outsidethe building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres

Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) complete in all respect

Cement concrete 1:8:16 (a) With brick ballast 32mm / 40mm gauge (i) mixing by manual means

Cement concrete 1:2:4 (a) With stone ballast or shingle (i) mixing by manual means

Providing and fixing 1st quality ceramic glazedwall tiles Matt/Semi Matt/ Glosy /Highly Gloss finish/ Highlighter/ emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x 200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqmincluding pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing PVC Cistern 10 Ltr. Capacity ISI marked IS 7231:1994 ( size32.5x47.6x15.5 cm) of approved make(to the approval of the Engineer-in-charge) including PVC fittings complete.

Cement rendering on plaster 1mm thick-On back open yard

Repair of main water supply pipe line in 400KV BBMB Complex Panipat up to satisfaction of officer in charge

Removing of door/window shutter's with hinges complete in all respect inclding all lead and lift etc.

The Sheikhpura Coop. L&C Society Ltd.

The Khan Coop. L&C Society Ltd.