Construction of Anganwadi building at K.Ayyampalayam H/O K.Ayyampalayam

Amount

Construction of New Anganwadi Building at K.Ayyampalayam H/O K.Ayyampalayam

EARTHWORK EXCAVATION for foundation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick, well rammed and consolidated and depositing the surplus earth within the compound in places shown by the departmental officers with initial lead and lift etc.,including levelling the sites complete complying with standard specifications and as directed. (Hard Soil )

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete

Refilling with Excavated Earth in all etc

Collection and supply of gravel filling in to the basement including cost and conveyance to the siteand all labour charges for filling

Filling in basement with Msand in layers not more than 15cm thick and well rammed, watered and consolidated including all labour charges as per standard specification.

Brick work in following Cement Mortar using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification.BGL

Brick work in following Cement Mortar using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification.ABGL

Supplying and erecting centering for sides & soffits including supports and strutting up to 3.29m height for plane surfaces in all floors with all cross bracing using mild steel sheets of size 90cm x 60cm and 10 gauge stiffened welded with mild steel angles of size 25mm x 25mm x 3mm for boarding laid over country wood poists of size 10cm x 6.5cm dia spaced at about 90cm center to center etc., complete complying with std. Specifications and as directed. For RCC floor slab, roof slab, rectangular, square Tee or Ell beams, lintel, staircase waise slab, landing slab, landing beam,portico beam, etc.,

Supplying and erecting centering for sides & soffits including supports and strutting up to 3.29m height for plane surfaces in all floors with all cross bracing using mild steel sheets of size 90cm x 60cm and 10 gauge stiffened welded with mild steel angles of size 25mm x 25mm x 3mm for boarding laid over country wood poists of size 10cm x 6.5cm dia spaced at about 90cm center to center etc., complete complying with std. Specifications and as directed. For RCC floor slab, roof slab, rectangular, square Tee or Ell beams, lintel, staircase waise slab, landing slab, landing beam,portico beam, etc.,ABGL

Supplying ,fabricating and placing in position of mild steel or ribbed for steel rods and all RCC works as per the design given including cost of steel and binding wire in all floors etc., & conveyance of steel as per std. Specification etc.,complete complying with std. Specifications and as directed.

RCC 1:1 1/2:3 mix using 20 mm ISS HBG metal for RCC items of works excluding cost of reinforcement and fabricating charges and centering and shuttering charges but including curing providing fixtures like fan clamps in the RCC floor or roof level wherever neccessary and bearing surfaces of walls, sides and bottom of slab,beams etc., complete

Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The wall putty shall be got approved by the Executive Engineer before use of work).

Plastering with cement mortar 1:3 mix to 10mm thick including curing, cost and conveyance of all materials & all labour charges etc., complete.

Plastering with cement mortar 1:5 mix to 12mm thick including curing, cost and conveyance of all materials & all labour charges etc., complete.

Paving the FLOORING with scratch proof Printed VERTIFIED TILES of approved quality and colour of size 600*600*8 mm in all floors over 20mm thick cement mortar 1:3 (one cement and three sand) base above the existing bed concrete and pointing with same colour cement added with colouring pigments at 4.00 kg/m2 etc., complete complying with standard specification.

Providing granolithic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick (Using M-Sand) including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete for 10 cum

Paving the Floor with scratch proof ceromic tiles of size 305x305x6mm including cost and conveyance of all materials to site and all labour charges etc complete

Dadooing of walls with Colour glazed tiles of size 15 cm x15cmx6mm laid in CM 1:2, 10mm thick & pointing with white cement using 0.4kg/cm2 -10Sqm.

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone M.Sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Exterior Emulsion painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete

Painting two coats over New iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete

Supplying and fixing in Position European type water Closet of best quality and approved make with 100mm " p" or "s" trap with double flapped rigit P.V.C Seat level flusing etc

Supplying and fixing in Position Ordinary colour glazed indian type water closet quality and approved make with 100mm " p" or "s" trap with double flapped rigit P.V.C Seat level flusing etc

Supply and Fixing of RCC Precast slab for septic tank manhole in position

Supply and Fixing of Cuddapah slab of 20mm thick for Shelf arrangements including cost and conveyace of all materials to site and all labour charges etc complete

Supply and Fixing of Cuddapah Sink and all labour charges etc complete

Fabricating supply and fixing and position MS Door , Windows et

Wiringwith2x1.5sq.mm.(22/0.3)PVCinsulatedSCunsheathedcopperconductorof1100VgradeinsuitablePVCrigidpipeconcealedinwallandceilingwithPVCaccessoiresinflushwithwallwith3mmthickhylumsheetcoverwithTWswitchboxand5AFTswitchandmakinggoodoftheconcealedportionwithsuitable colour for PVC concealed light / fan Point (for electronic regulator) (5 points per coil) SD 25

Wiringwith2x1.5sq.mm.(22/0.3)PVCinsulatedSCunsheathedcopperconductorof1100VgradeinsuitablePVCrigidpipeconcealedinwallandceilingwithPVCaccessoriesinflushwithwallwith150mmx100mmx113mmTWswitchboxwith3mmthickhylemsheetcoverfor5A3pinnoninterlockingwallsocketwith5Aflushtypeswitchwithcontinuousearthwireconnectionof14SWGTCwireandmakinggoodoftheconcealed portion with suitable colour for concealed PVC plug point SD 38

Supplyandrunof4of4sq.mm.(56/0.3)PVCinsulatedSCunsheathedcopperconductorof1100Vgradeon7 / 20 GI bearer wire for service connection mains SD 65

Supplyandrunof2of4sq.mm.(56/0.3)PVCinsulatedSCunsheathedcopperconductorof1100Vgradein25mmdiaGIpipe(Class'B')suitablybentatbothendswithnecessaryangleironuprightandendsupportsformains SD 70

Supplyandfixingofsingleboxtype4'36WfluorescentfittingcompletewithelectronicballastwithTWroundblocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting SD 87

Supplyandfixingof1200mmsweepACceilingfancompletewithsteppedelectronic300Wregulatorwiththeexisting down rod on the existing clamps SD 112

Supplyandfixingof15Aaerialfuseunit(500A)onsuitable100x100mmTWconcealedboxwithhylemsheeton on the tapping pole with necessary clamps SD 130

PVC Water Tank - 500 litres

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

Sathishkumar (BID ID -1324972)