8495 ADDITION/ALTERATION TO SAFETY BAY , DMI OFFICE AND ATC STORE AT PARUNDU AND SPECIAL REPAIRS TO TOP BEAM AND GLASS COPING ON DFO BOUNDARY WALL AT 7N DET RAMNAD UNDER GE TIRUNELVELI

Amount

Excavating in post holes (or similar holes) each n exc 0.5cum, getting out, returning, filling in soft soil and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and as directed.

Material and Labour for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation complete all as specified and as directed.

Material and Labour for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in foundation,filling mass concrete complete all as specified and as directed.

Material and labour Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour Rendering 15mm thick cement plaster (1:4) on fair faces of concrete surfaces finished fair and even without using extra lime or cement complete all as specified and directed.

Material and labour Preparation of new plastered surface on wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm in camouflage pattern complete all as specified and as directed.

Supply and fixing for rolled sections as in main and cross beam, hip and jack rafter purlins where connected to common rafter and running rails and guides for sliding door,fixed with angle cleats or other connecting plates etc conforming to Fe 410-W (Gde-E-250) complete all as specified and directed.

Supply and fixing Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel,hollow or flat sections) including distance pieces, cleats with Fe 410 -W (GdeE- 250) qualityA etc complete all as specified and as directed.

Supply and fixing Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment with Fe 410 -W (GdeE- 250) qualityA complete all as specified and as directed.

Material and labour for preparing new or previously untreated surface of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

Supply and fixing bib taps fancy type 15mm dia bore, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fixing pillar taps, fancy type 15mm dia bore, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.

Supply and fixing CP brass chromium plated shower rose 125 mm size fixed to 15mm pipe of revolving type complete all as specified and as directed.

Supply and fixing 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size 32mm dia complete all as specified and directed.

Supply and fixing 15mm dia bore stop cock/angle cock, fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe on for unions complete all as specified and as directed.

Supply and fixing Unplasticised PVC pipes 20 mm bore dia of pressure rating 10 kgf/cm2 with all fitttings fixed complete to walls, ceilings or in floors (concealed) including cutting chases and making good surfaces complete all as specified and directed.

Supply and fixing Unplasticised PVC pipes 15 mm bore dia of pressure rating 10 kgf/cm2 with all fitttings fixed complete to walls, ceilings or in floors (concealed) including cutting chases and making good surfaces complete all as specified and directed.

Supply and fixing Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

Supply and fix 32mm Low density polyethylene pipes (LDPE) waste pipe of pressure rating 6kgf/cm2 fixed complete to walls, or in floors etc.for sinks/basin etc complete all as specified and as directed.

Supply and fixing Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) all as specified and as directed.

Supply and fixing Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

Supply and fixing vitreous China wash basin white, flat back,size 550X400 mm including cutting for pinning in ends of brackets,complete all as specified and as directed.

Supply and fixing vitreous China wash down water closet pan (pedestal pattern) white,incl. P or S Trap trap of 100mm bore dia, connection to drain and flushing pipe including seat cover for pedstal pan complete all as specified and as directed.

Supply and fixing PVC connection 15mm dia and 600mm long with PTMT nuts complete all as directed.

Supply and fixing PVC connection 15mm dia and 450mm long with PTMT nuts complete all as directed.

Supply and fixing in repair 15mm bore fancy type chromium plated bib tap cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed.

Supply and fixing in repair pillar taps, fancy type 15mm dia bore, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

Supply and fixing in repairs CP brass chromium plated shower rose 125 mm size fixed to 15mm pipe of revolving type all as specified.

Supply and fixing in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size 32mm dia complete all as specified and directed.

Supply and fixing in repairs 15mm dia bore stop cock/angle cock, cast fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe on for unions and fixed complete all as specified and as directed.

Supply and Fix in repairs stop valve 15mm dia fancy type chromium plated with long shank and cup (concealed type) all as specified and directed by the Engr-in-charge.

Supply and fixing in repair Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) all as specified and as directed.

Supply and Fix in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

Supply and fixing in repairs vitreous China wash basin white, flat back,size 550X400 mm including cutting for pinning in ends of brackets,complete all as specified and as directed.

Supply and fixing in repair vitreous China wash down water closet pan (pedestal pattern) white, connection to drain and flushing pipe including seat cover for pedstal pan complete all as specified and as directed.

Supply and fixing 110mm dia PVC (SWR) P trap complete all as specified and as directed.

Supply and fixing in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Supply and fixing in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position in repairs complete in all respect as specified.

Supply and fixing 15mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., with all fitttings including taking down old existing steel tubing with connections for taking into credit complete all as specified and as directed.

Supply and fixing 20mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., with all fitttings including taking down old existing steel tubing with connections for taking into credit complete all as specified and as directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not hacking) removing serviceable tiles to stores and rubbish off premises all as specified.

Material and labour chequered Cement concrete tiles 20cm x 20xm x25mm thick, with grey cement and pigment set, jointed and pointed in neat cement slurry in floors, inluding Screed bed or bedding layer of mortar 20 mm thick in CM (1:4) for laying floor finishes complete all as specified and directed.

Material and labour vitrified ceramic tiles with dark shade 10mm thick (Square/rectangular) area of each tile not exceeding 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match inluding Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and directed.

All as per Item No 47 above but in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat of 10mm thick in CM 1:4 on brickwalls for skirting/DADO complete all as specified and as directed.

Material and labour Non Skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 in floors complete all as specified and as directed.

Material and labour for 450x350x7mm thick glazed coloured ceramic tiles in vertical surfaces set and jointed in neat cement slurry pointed in coloured cement to match over rendering 10mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed.

Dismantling boarding, any description, fixed any position with nails including fillets etc complete all as directed.

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) tiles semi perforated 12mm thk with Size 595 x 595 mm of approved texture, design and patterns laid on GI framework complete as per particular specifications and as directed by Engr-in-charge.

Taking down old door or window or cup board Chowkhats or frames n.exc 1.50 sqm each with shutters but without taking off shutters from the frames complete all as specified and directed.

Taking down door or window or cupboard Chowkhats of frames of size exc 1.5 sq.m but n exc 4sqm each with shutters (Without taking of shutters from the frame) complete all as specified and directed.

Dismantling structural steel work including doors, gates, rolling shuuter but excluding framed truss etc. complete all as specified and as directed.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in?Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead double glazing bead of appropriate dimension comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge.

Supply and fixing powder coated aluminium frame for doors, windows, ventilators,partitions with one or more rebates including anodised aluminium snap beading, stainless steel screws joining cleat for fixing etc complete all as specified and as directed.

Supply and fixing anodised aluminium door shutters with aluminium section 0.55kg/m including necessary joining cleats , glazing clips, rubber neoprane packing, handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc with powder coating complete all as specified and directed.

Supply and fixing 4.8mm thick frosted sheet glass ordinary quality fixing with necessary rubber gasket and beedings etc in squares exc 0.50 sqm in each pane complete all as specified and as directed.

Material and labour for 12mm thk prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed

Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixed in the frame at site as per specification & drawing.

Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and as directed

Supply and fixing 100mm mild steel butt hinges medium weight including screws all as spefied and as directed.

Supply and fixing aluminium anodised 150mm barrel tower bolts of extruded section complete all as specified and directed.

Supply and fixing aluminium handle 125 mm cast type anodised complete all as specified and directed.

Supply and fixing 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

Material and labour Machine cut pre polished kota stone slab flooring 20-25mm thick over cement screed base 15mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Material and labour Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed including 10mm thick rendering in CM 1:4 etc complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

Material and labour Mild steel TMT bar 10mm dia and over cut to length, bent to shape required, including cranking, bending with mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour cement concrete with type B1 1:2:4 (20mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material and labour Pre-cast cement concrete block masonry with solid blocks type C1 1:3:6 using 20 mm graded aggregate set in CM 1:6 n exc. 10 cm in width and setting in mortar, complete all as specified and as directed.

Material and labour for rendering 10mm thick in (CM 1:6) on fair faces of brick work or concrete surfaces and to be finished fair and even complete all as specified and as directed.

Material and labour Preparation of newly plastered surfaces on walls and applying two coats of Oil bound distemper over a coat of primer on walls complete all as specified and as directed.

Demolition Concrete in ground floors unreinforced and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for 75mm thick cement concrete type C-2, ( 1:3:6) (20 mm graded aggregate) as in plinth protection finished fair and even without using extra cement etc complete all as specified and as directed.

Material and labour in repair 75mm dia PVC(SWR) floor trap with grating including jointing with solvent cement complete all as specified and directed.

Material and labour in repair 110mm dia PVC(SWR) gully trap setting and hoisting with solvent cement complete all as specified and directed.

Supply and fixing in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and as directed.

Supply and fixing in repairs Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and as directed.

Supply and fixing in repairs Harrison curtain rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.

Supply and fix in repairs door closer hydraulically regulated aluminium extruded section, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed.

Supply and fix aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Taking down cement plaster of any description on bricks walls, glass coping etc, including racking out joints, hacking for keys, scrubbing down with water including existng glass coping etc, complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed.

Material and labour for RCC 1:2:4 type B-1 using 20mm graded stone aggregate Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

Material and labour for rendering 25mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces on top of walls complete all as specified and as directed.

Material and labour broken glass coping embeded at the rate of 10kg/sqm of glass rendered surface on top of walls all as specifeid and as directed.

Demolition of brick work or stone/boulder masonry, built in cement or lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and as directed.

Material and labour for preparation of new plastered wall surface and applying two coat of cement base paint over a coat of primer complete all as specified.

Material and labour for preparation of old plastered wall surface and applying one coat of cement base paint complete all as specified.

Supply , erection, testing of maintainance free chemical earthing by auguring & installation of Carbon Coated M.S Pipe (pipe - in - pipe) with copper plated welded busbar terminal . Carbon Coated M.S Pipe shall have Outer Dia is 101 mm with a wall thickness of 2 mm , Inner Dia is 48 mm with a wall thickness of 2.6 mm, length 3m , Internal Corrosion Protection by corrosion resistant Crystalline Conductive Compound is filled and compacted in the cavity within the pipes to enhance the electrodes performance., and fill with (a) Eco friendly backfill Compound Electrodite (25 kg) with following properties: Resistivity : < 5 ohm-metre (In ideal moist conditions) ; > 5 ohm-metre (Dry Conditions) , Ph Value : 9-13 , High water retention capacity , Hygroscopic , Ionic & Electronic conduction ,Swells when it comes in contact with water thereby engaging constant contact between the electrode surface & soil (b) Eco friendly backfill Compound Conductolite (25 kg) with following properties: Resistivity : < 0.5 ohm-metre (In dry conditions) & Resistivity is not moisture dependant,Ph Value : 8.0 - 9.0, Electronic & Ionic conduction, Less susceptible to shrinkage,with hygroscopic & corrosion resistive properties (c) Eco friendly backfill Compound Conductolite with following properties: Soil Enhancer / Booster, Powered by Neutralising & Diffusing agents , Ph Value : 7.0 - 9.0 , Ionic conduction, Forms an aqueous solution ,Positive water soluble agents , reduces the soil resistivity, forms an aqueous solution that creates conductive roots in the immediate environment of the earthing system which enables dissipation of fault current smoothly and connecting with earth strip & covering with heavy duty polyplastic earth pit chamber cover . Make : M/s Ashlok Safe Earthing Electrode Limited.

Supply and lay earth continuity conductor or main earting lead fixed to wall on batten or recess or burried in ground or drawn in conduit / conduit pipe or fixed to poles or any other indicted situation for loop earthing etc of galvanised steel earth wire 4mm dia including taking down old unserviceable GI earth wire complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc., removing materials to store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors etc.

Material and labour for point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor PVC insulated cable 1100 volts grade single core drawn into and including non-metallic rigid PVC conduit of 20 mm dia/ PVC Casing capping along with 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof with and including 1.6 mm thick MS sheet fabricated terminal boxes flush mounted for mounting the switches, sockets, fan regulator etc as required with 3mm thick laminated hylum sheet top cover all as specified and directed for :-

(a) One light point controlled by one switch

(b) One fan point controlled by one regulator / switch.

(c)One 3 pin socket outlet 5 amps socket on independent board

(d) One 3 pin socket outlet 5 amps socket on Same board

Supply and fix in replacement ceiling rose 3 ways PVC / Polycarbonate, isolated body complete all as specified and as directed.

S/ F in replacement Modular switch 1 way 5A, 1 Module including taking down old unserviceable switch and removing the material for taking credit complete all as specified and as directed.

Supply and fixing in replacement Modular Socket 5A-2/3 pin combined 2 Module including taking down old unserviceable socket and removing the material for taking credit complete all as specified and as directed.

Supply and fixing in replacement Modular fan Regulator Step type , 2 Module including taking down old unserviceable fan regulator and removing the material for taking credit complete all as specified and as directed.

Supply & fix in replacement Modular White cover plate with frame, 3 Module and Modular metal flush box 3 module including taking down old unserviceable and removing the material for taking credit complete all as specified and directed.

Supply & fix in replacement Modular White cover plate with frame, 6 Module and Modular metal flush box 6 module including taking down old unserviceable and removing the material for taking credit complete all as specified and directed.

Supply and fix sheet metal enclosure powder coated double door for Distribution Board, SPN 8 way DB with 200 A bus bar ,240 V with detachable Gland Plate, Box Insertion Marks ,Circuit Identification Label ,Neutral Link ,Earth Link , Tin Plated Copper Bus Bar including , Disconnecting electric connections, dismantling from position unserviceable DBs for taking into credit complete all as specified and as directed.

Supply and fix MCB SP 5 A to 32 A , B curve, 10 kA including disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit complete all as specified and as directed.

Supply and fix MCB SPN 32 Amps , C curve 10 kA including disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit complete all as specified and as directed.

Supply and fixing in replacement of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

Supply and fix in replacement of exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and taking down old U/S fittings for taking into credit complete all as specified and directed

Supply and fixing LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size including taking down old U/S fittings for taking into credit complete all as specified and directed

Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size including taking down old U/S fittings for taking into credit complete all as specified and directed

Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size including taking down old U/S fittings for taking into credit complete all as specified and directed

Material and labour for sub main wiring in replacement with two run single core 4 sqmm multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade and one run of 4 sq mm multi stranded copper conductor cable as earth continuity conductor drawn into and including non-metallic rigid PVC conduit 25 mm dia/PVC casing capping 25 mm including conduit accessories all as specified and directed. Note: Three runs of 4 Sqmm cable and one run of 25mmconduit / casing capping will be measured as one unit length.

Material and labour for Sub main wiring in replacement with two run single core 4 sqmm multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade and one run of 4 sq mm multi stranded copper conductor cable as earth continuity conductor drawn into and including stove enamelled Steel conduit 25 mm dia including conduit accessories all as specified and directed. Note: Three runs of 4 Sqmm cable and one run of 25mmconduit / casing capping will be measured as one unit length.

Material and labour for point wiring with two single core 1100 V grade FRLSH conforming to IS-694 PVC insulated unsheathed cables of size 1.5 Sq mm multi-stranded Copper conductor drawn through and including In stove enamelled steel conduit and conduit accessories fixed on surface including breaking of walls and making good to disturbed surfaces in wall/roof/ceiling where required complete an earth wire of PVC cable 1.5 Sqmm multi stranded copper conductor and connected to all metal boxes and common earth dolly all as specified and directed

Supply and fix Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V for as specified and directed

Supply and fixing LED light fitting 2x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver,holders, connector etc. Complete with all accessories rewired and including connecting up with three core flexible copper conductor cable with suitable size as specified and directed

Supply and fix Flame proof exhaust fan 18" single phase 0.33 HP motor 1440 rpm 4000 cfm and louvers 18" complete all specified and directed

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for laying pipes and getting out in any type of soil, complete all as specified

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified

Removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge.

Spreading of riddled earth obtained from trenches for cable cushioning on top and bottom of cable for cable protection complete all as specified and directed. (Note: Only punned thickness of riddled earth shall be measured)

Supply and lay bricks in trenches , common burnt clay building bricks, subclass `B’ designation 75, old size ,with width equal to the length of the brick; complete all as specified and directed.

Supply and laying 4 core 16 sqmm LT under ground cable 1100 volts grade Crosslinked Polyethylene (XLPE) insulated PVC Sheathed Cables: armoured multistranded heavy duty electric cable with aluminium conductor laid in trenches/ duct / walls including cable gland and lugs on both end termination including laying, connecting to various switches in panel board, testing and commissioning etc including taking out existing unserviceable cables complete all as directed & as specified.

V S KANNAN ENTERPRISES (BID ID -3483084)