Construction work of women toilet in the bonded excise warehouse premises of Excise Department Bulandshahr and office of District Excise Officer Bulandshahr

Excavating, supplying and filling of local earth (including royalty) bym mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.DSR 2.25(a) Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 4.1.8 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below DSR15.12.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm .DSR15.23.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under,including cutting the patch in proper shape,raking out joints preparing & plastering the surface of the walls complete ,including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.As per DSR14.1.2 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST.

Providing & applying white cement based putty of average thickness 1 mm, of approved brand & manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.As Per DSR 13.80. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST.

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over & including priming coat of exterior primer applied @ 2.20 kg/10 sqm.As Per DSR 13.48.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST.

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:Fixing with adjustable lugs with split end tail to each jamb. Profile -B as Per DSR 10.14.1.1Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal bracesAs per DSR 10.5.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST.