REPAIR/MAINT OF PUMPING MACHINERY, MOTORS, PANEL BOARDS, CLEANING OF UG SUMPS, OH TANKS AND INTERNAL WIRING ETC FOR WATER SUPPLY INSTALLATIONS AT ACC and S AREA UNDER GE SOUTH AHMEDNAGAR

Amount

Repair/ maintainance/ servicing and checking thoroughly, defective centrifugal pump set of capacity 120 HP by dismantling of pump set at site and checking inspection and replacement of unserviceable spares as required or as specified and as directed. Note :- (a) Spares shall be measured and paid separately under relevant items as 'S&F in repairs'. (b) The work involves proper alignment after repairing, testing, recommissioning the pump set to the entire satisfaction of Engineer-in-Charge. (c) Job shall be carried out by the authorised persons of the Manufacturer.

All as per serial item No 1 but pump set of capacity 100/90 HP.

All as per serial item No 1 but pump set of capacity 75 HP.

All as per serial item No 1 but pump set of capacity 60 HP.

All as per serial item No 1 but pump set of capacity 30 HP.

All as per serial item No 1 but pump set of capacity 25 HP.

S&F in repair, air release valve including making hole on pump for re-threading for 30 HP to 120 HP pump set complete all as specified and as directed

S&F in repairs, gland plate, nuts and bolts, both side of pump 04 Nos for 25 HP to 120 HP pump complete all as specified and as directed

S&F in repairs, water retaining (Deflector) ring DE/NDE for 120 HP pump set complete all as specified and as directed

S&F in repairs, spilt linter ring, CI, DE/NDE, for 120 HP pump set complete all as specified and as directed

S&F in repairs, cartridge for bearing, DE/NDE for 120 HP pump set complete all as specified and as directed

S&F in repairs, shaft sleeve, CI, DE/NDE for 120 HP pump set complete all as specified and as directed

S&F in repairs, stuffing box bush (Throat), CI, DE/NDE for 120 HP pump set complete all as specified and as directed

S&F in repairs, gland plate with gland packing, CI, for 120 HP pump set complete all as specified and as directed

S&F in repairs, set of gasket for 120 HP pump set complete all as specified and as directed

S&F in repairs, set of 'O' ring, for 120 HP pump set complete all as specified and as directed

S&F in repairs, wear ring, CI, for 120 HP pump set complete all as specified and as directed

S&F in repairs, impeller CI stage-I for 100/90 HP pump set complete all as specified and as directed

S&F in repairs, impeller CI stage-II for 100/90 HP pump set complete all as specified and as directed

S&F in repairs, pump shaft C-40 including sleeves for 100/90 HP pump set complete all as specified and as directed

S&F in repairs, water retaining (Deflector) ring DE/NDE for 100/90 HP pump set complete all as specified and as directed

S&F in repairs, spilt linter ring CI DE/NDE for 100/90 HP pump set complete all as specified and as directed

S&F in repairs, cartridge for bearing DE/NDE for 100/90 HP pump set complete all as specified and as directed

S&F in repairs, shaft sleeve CI DE/NDE for 100/90 HP pump set complete all as specified and as directed

S&F in repairs, stuffing box bush (Throat) CI DE/NDE for 100/90 HP pump set complete all as specified and as directed

S&F in repairs, gland plate with gland packing CI for 100/90 HP pump set complete all as specified and as directed

S&F in repairs, set of gasket for 100/90 HP pump set complete all as specified and as directed

S&F in repairs, set of 'O' ring for 100/90 HP pump set complete all as specified and as directed

S&F in repairs, wear ring CI for 100/90 HP pump set complete all as specified and as directed

S&F in repairs, impeller CI stage -I for 75 HP pump set complete all as specified and as directed

S&F in repairs, impeller CI stage -II for 75 HP pump set complete all as specified and as directed

S&F in repairs, pump shaft including sleeves for 75 HP pump set complete all as specified and as directed

S&F in repairs, water retaining (Deflector) ring DE/NDE for 75 HP pump set complete all as specified and as directed

S&F in repairs, linter ring CI DE/NDE for 75 HP pump set complete all as specified and as directed

S&F in repairs, Cartridge for bearing DE/NDE for 75 HP Pump set complete all as specified and as directed

S&F in repairs, shaft sleeve CI DE/NDE for 75 HP pump set complete all as specified and as directed

S&F in repairs, stuffing box bush (Throat) CI DE/NDE for 75 HP pump set complete all as specified and as directed

S&F in repairs, gland plate with gland packing CI for 75 HP pump set complete all as specified and as directed

S&F in repairs, set of gasket for 75 HP pump set complete all as specified and as directed

S&F in repairs, set of 'O' ring for 75 HP pump set complete all as specified and as directed

S&F in repairs, wear ring CI for 75 HP pump set complete all as specified and as directed

S&F in repairs, impeller CI stage -I for 60 HP pump set complete all as specified and as directed

S&F in repairs, impeller CI stage -II for 60 HP pump set complete all as specified and as directed

S&F in repairs, pump shaft including sleeves for 60 HP pump set complete all as specified and as directed

S&F in repairs, water retaining (Deflector) ring DE/NDE for 60 HP pump set complete all as specified and as directed

S&F in repairs, linter ring CI DE/NDE for 60 HP pump set complete all as specified and as directed.

S&F in repairs, cartridge for bearing DE/NDE for 60 HP pump set complete all as specified and as directed

S&F in repairs, shaft Sleeve CI DE/NDE for 60 HP pump set complete all as specified and as directed

S&F in repairs, stuffing box bush (Throat) CI DE/NDE for 60 HP pump set complete all as specified and as directed

S&F in repairs, gland plate with gland packing CI for 60 HP pump set complete all as specified and as directed

S&F in repairs, set of gasket for 60 HP pump set complete all as specified and as directed

S&F in repairs, set of 'O' ring for 60 HP pump set complete all as specified and as directed complete all as specified and as directed

S&F in repairs, wear ring CI for 60 HP pump set complete all as specified and as directed

S&F in repairs, impeller CI for 30 HP pump set complete all as specified and as directed

S&F in repairs, pump shaft including sleeves for 30 HP pump set complete all as specified and as directed

S&F in repairs, water retaining (Deflector) ring DE/NDE for 30 HP pump set complete all as specified and as directed

S&F in repairs, linter Ring CI DE/NDE for 30 HP pump set complete all as specified and as directed

S&F in repairs, cartridge for bearing DE/NDE for 30 HP pump set complete all as specified and as directed

S&F in repairs, shaft sleeve CI DE/NDE for 30 HP pump set complete all as specified and as directed

S&F in repairs, stuffing box bush (Throat) CI DE/NDE for 30 HP pump set complete all as specified and as directed

S&F in repairs, gland plate with gland packing CI for 30 HP pump set complete all as specified and as directed

S&F in repairs, set of gasket for 30 HP pump set complete all as specified and as directed

S&F in repairs, set of 'O' ring for 30 HP pump set complete all as specified and as directed

S&F in repairs, wear ring CI for 30 HP pump set complete all as specified and as directed

S&F in repairs, impeller CI for 25 HP pump set complete all as specified and as directed

S&F in repairs, pump shaft including sleeves for 25 HP pump set complete all as specified and as directed

S&F in repairs, water retaining (Deflector) ring DE/NDE for 25 HP pump set complete all as specified and as directed

S&F in repairs, linter Ring CI DE/NDE for 25 HP pump set complete all as specified and as directed

S&F in repairs, cartridge for bearing DE/NDE for 25 HP pump set complete all as specified and as directed

S&F in repairs, shaft sleeve CI DE/NDE for 25 HP pump set complete all as specified and as directed

S&F in repairs, stuffing box bush (Throat) CI DE/NDE for 25 HP pump set complete all as specified and as directed

S&F in repairs, gland plate with gland packing CI for 25 HP pump set complete all as specified and as directed

S&F in repairs, set of gasket for 25 HP pump set complete all as specified and as directed

S&F in repairs, set of 'O' ring for 25 HP pump set complete all as specified and as directed

S&F in repairs, wear ring CI for 25 HP pump set complete all as specified and as directed

Dismantling and taking down unserviceable electric motor of 120 HP capacity of pump set from foundation and transportation to workshop for repairing, opening and rewinding with new super enamelled copper insulated winding wire as per existing gauge of copper wire, winding with insulating material, varnishing, heating etc and reassembling, transporting back to site of work and installing on existing foundation including proper alignment and testing complete all as specified and as directed. Note :- All disturbed surfaces shall be made good to match the eixisting surfaces without any extra cost to the department.

All as per serial item No 76 but electric motor of 100/90 HP capacity of pump set complete all as specified and as directed.

All as per serial item No 76 but electric motor of 75 HP capacity of pump set complete all as specified and as directed complete all as specified and as directed.

All as per serial item No 76 but electric motor of 60 HP capacity of pump set complete all as specified and as directed.

All as per serial item No 76 but electric motor of 30 HP capacity of pump set complete all as specified and as directed.

All as per serial item No 76 but electric motor of 25 HP capacity of pump set complete all as specified and as directed.

S&F ball bearing suitable for 120 HP capacity pump including bearing checknut, press washer, shaft brass nut including taking out old unserviceable bearing all as specified and as directed

S&F ball bearing suitable for 100/90 HP capacity pump including bearing checknut, press washer, shaft brass nut including taking out old unserviceable bearing all as specified and as directed

S&F ball bearing suitable for 75 HP capacity pump including bearing checknut, press washer, shaft brass nut including taking out old unserviceable bearing all as specified and as directed

S&F ball bearing suitable for 60 HP capacity pump including bearing checknut press washer shaft brass nut including taking out old unserviceable bearing all as specified and as directed

S&F ball bearing suitable for 30 HP capacity pump including bearing checknut, press washer, shaft brass nut including taking out old unserviceable bearing all as specified and as directed

S&F ball bearing suitable for 25 HP capacity pump including bearing checknut, press washer, shaft brass nut including taking out old unserviceable bearing all as specified and as directed

S&F ball bearing suitable for 120 HP capacity motor including cir clip including taking out old unserviceable bearing all as specified and as directed

S&F ball bearing suitable for 100/90 HP capacity motor including cir clip including taking out old unserviceable bearing all as specified and as directed

S&F ball bearing suitable for 75 HP capacity motor including cir clip including taking out old unserviceable bearing all as specified and as directed

S&F ball bearing suitable for 60 HP capacity motor including cir clip including taking out old unserviceable bearing all as specified and as directed

S&F ball bearing suitable for 30 HP capacity motor including cir clip including taking out old unserviceable bearing all as specified and as directed

S&F ball bearing suitable for 25 HP capacity motor including cir clip including taking out old unserviceable bearing all as specified and as directed

S&F in repairs, coupling bushes with studs of existing type and size suitable for 25 HP to 120 HP pump set all as specified and as directed.

S&F in repairs, coupling star bush of existing type and size suitable for 25HP to 120 HP Pump set all as specified and as directed.

S&F in repairs, love-joy / flexible type coupling, made out of MS, complete suitable for 25 HP to120HP pump set, including rubber star bush/rubber bush with nut bolts, metal filling existing shaft of motor/ pump and re-grinding, making key slot etc and testing with zero level alignment complete all as specified and as directed.

M&L in repairs for foundation of motor pump set of 100/ 90/ 75/ 60/ 30/ 25 HP by removing and taking out pump motor from foundation by unscrewing the nuts bolts and keeping away, cutting, welding and machining with and including flat iron or channel of 50 x 6 mm flat iron and channel MC 75 to MC 150 size as required for strengthing the foundation plate, cutting and replacing / shifting and welding at proper fixing of motor on foundation including connections, replacement of foundation nut bolts, washers, with accurate realignment of motor with pump to avoid vibration and smooth running of pump on full load, testing and commissioning complete all as directed. Note:- The quoted rate shall be deemed to be inclusive of all civil works including PCC 1:2:4, type B2 as in foundation and grounting work including necessary form work, plaster etc complete.

S&F in repairs, Pressure gauge (complete set etc. GI bend pipe, nipples, operating switch / valve) of capacity 0-100 kg as per sample suitable for 25 to 100 HP pump set complete all as specified and as directed.

S&F in repairs, single phase preventor, suitable for 100/90/75/60/25 HP pump set starter, 415/440 Volt, 50 Hz all as specified and as directed.

S&F in repairs, ML6/ML4/ML2 starter timer, suitable/existing capacity for 100/90/75/60/25 HP pump set starter, 415/440 Volt, 50 Hz all as specified and as directed.

S&F in repairs, 3 pole power contactors, TYPE -MNX-95 conforming to IS/IEC 60947-4-1 and IEC 6947-1 Amp rating 95 Amps (MNX95) along with add on TOP 2 NO+ 2 NC or add on side fixed in existing FASD starter complete all as specified and as directed.

S&F in repairs, 3 pole power contactors, TYPE -MNX -70 conforming to IS/IEC 60947-4-1and IEC 6947-1 Amp rating 70 Amps (MNX70) fixed in existing FASD starter complete all as specified and as directed.

S&F in repairs, spare contact kit and spare coil as per L&T Cat No SS-95311 and SS91258 or equivalent in Siemens/Crompton suitable for ML-4 starter complete all as specified and as directed.

S&F in repairs, spare contact kit and spare coil as per L&T Cat part No SS-95313 and SS91258 or equivalent in Siemens/Crompton suitable for ML-6 starter complete all as specified and as directed.

S&F 3 pole power contactor ML-2 TP 32 Amps capacity suitable for operation on 415 Volts 50 Hz, AC supply complete includng taking out old unserviceable power contactor from panel board all as specified and as directed.

S&F 3 pole power contactor ML-3 TP 40 Amps capacity suitable for operation on 415 Volts 50 Hz, AC supply complete including taking out old unserviceable power contactor from panel board all as specified and as directed.

S&F 3 pole power contactor ML-4 TP 70 Amps capacity suitable for operation on 415 Volts 50 Hz, AC supply complete including taking out old unserviceable pole power contactor from panel board all as specified and as directed.

S&F 3 pole power contactor ML-6 TP 110 Amps capacity suitable for operation on 415 Volts 50 Hz AC supply complete including taking out old unserviceable power contactor from panel board all as specified and as directed.

S&F in repairs, spare contact Kit TYPE -ML 2, fixed in existing FASD starter complete all as specified and as directed.

S&F in repairs, spare contact Kit TYPE -ML 4, fixed in existing FASD starter complete all as specified and as directed.

S&F in repairs, spare contact Kit TYPE -ML 6, fixed in existing FASD starter complete all as specified and as directed.

S&F in repairs, spare coil TYPE -ML 2, fixed in existing FASD starter complete all as specified and as directed.

S&F in repairs, spare coil TYPE -ML 4, fixed in existing FASD starter complete all as specified and as directed.

S&F in repairs, spare coil TYPE -ML 6, fixed in existing FASD starter complete all as specified and as directed.

S&F in repairs, Thermal Overload Relays TYPE -ML 2/3, fixed in existing FASD starter complete all as specified and as directed.

S&F in repairs, on load change over switch 415 Volts in sheet metal enclosures, three phase, four pole, 400 Amps capacity, all as specified and as directed.

S&F in repairs, on load change over switch 415 Volts in sheet metal enclosures, three phase, four pole, 200 Amps capacity, all as specified and as directed.

M&L in replacement, earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to the GI earth strip 32 mm x 6 mm, by means of nut bolts, check nuts and washer of the GI . Earth wire connected upto main earth point/DBs alongwith 40mm dia GI pipe, light grade, including provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick RCC (1:2:4) cover with reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified including testing on completion.

M&L for repairs/refixing of loose GI earthing strip of size 32 mm x 6 mm thick on and including wooden gutties connecting to earthing and the test point of the lightening arrester of the overhead tank all as per existing and as directed. Note : GI strip, if corroded will be replaced by new where directed and the same shall be measured & paid separately as 'Supply only' under respective item

S&F in repairs, 4 Pole, MCCB, 400 Amp, 50 Hz, 415 Volts, adjustable type with rupturing capacity 36 KA all as specified and as directed.

S&F in repairs, 4 Pole, MCCB, 250 Amp, 50 Hz, 415 Volts, adjustable type with rupturing capacity 36 KA all as specified and as directed.

S&F in repairs, 4 Pole, MCCB, 200 Amp, 50 Hz, 415 Volts, adjustable type with rupturing capacity 36 KA all as specified and as directed.

S&F in repairs, 4 Pole, MCCB, 125 Amp, 50 Hz, 415 Volts, adjustable type with rupturing capacity 36 KA all as specified and as directed.

S&F in repairs, 4 Pole, MCCB, 160 Amp, 50 Hz, 415 Volts, adjustable type with rupturing capacity 36 KA all as specified and as directed.

M&L in repair of LT panel wiring with new wiring using new cables of same size as per approved makes given including replacement of lugs, thimbles etc complete all as specified and as directed .

M&L for replacement of LT panel CT coils as per exiting size and make complete all as specified and directed.

M&L for replacement of R Y B phase indicators complete set of make as per existing complete all as specfied and as directed.

S&F 1100 volts grade heavy duty cable, 50 sqmm, single core, PVC insulated, copper conductor, served with inner sheathing of PVC tape and overall PVC sheathed including taking down old unserviceable cable all as specified and as directed.

M&L in repairs for PTFE Teflon Graphite gland packing rope of size 10mm/12mm/14mm all as specified and as directed.

Supply only bearing grease HP/BP type servo Gem Natra-3/Lithon-3 in 5 kg pack all as specified and as directed.

Supply & filling, engine oil 20 W 40 turbo synthetic superior quality engine oil including taking out old oil all as specified and as directed.

Taking up or down choked GI water mains, 80 mm bore including all fittings and proper cleaning by internal brushing, removing chalkings and refixing / relaying in place, jointing, pressure testing and washing out complete all as specified and as directed.

All as per serial item No 132 but 100 mm bore.

Taking up or down choked CI water mains, 150 mm bore including all fittings with spigot and socket ends including burning out joints, removing lead and proper cleaning by internal brushing, removing chalking and refixing / relaying in place, jointing, pressure testing and washing out complete all as specified and as directed. Note : Run lead joints shall be measured and paid seperately.

All as per serial item No 134 here-in-before but for 200 mm bore.

All as per serial item No 134 here-in-before but for 250 mm bore.

M&L for 80mm bore GI tubing, medium grade laid in trenches / floors or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out complete including taking out old pipes and fittings all as specified and as directed.

All as per serial item No 137 here-in-before but for 100 mm bore.

M&L for DN 150 mm bore ductile Iron pipe with spigot and socket ends, centrifugally cast, class DI-K9, with finishing layer of bituminous coating as per annex C of IS 8329, including making threading, cutting, jointing for fixing flange as required at site conforming to IS: 8329 : 2000, ISI marked, in any length, laid in trenches , pressure testing, washing out including taking out old pipes and fittings complete all as specified and as directed.

All as per serial item No 139 here-in-before but for 200 mm bore.

All as per serial item No 139 here-in-before but for 250 mm bore.

M&L for CI / DI fittings and specials such as Bends (any type, radius and angle), Tapers any type (straight, bend, increasing, decreasing or double socket etc.), Tee pieces single branch, "Y" junction, double branch, cross (all sockets or socket and spigot), Collars, Caps, Plugs, Connecting pieces one end flanged and other end socketed or spigot ends or all socketed / spigot ends etc, suitable upto 150 mm bore pipe complete all as specified and as directed.

All as per serial item No 142 here-in-before but for 200 to 600 mm bore pipe.

M&L for run lead joints suitable for 150mm bore dia pipe, spigot and socket ends complete and pressure testing all as specified and as directed.

All as per serial item No 144 but for 200 mm bore pipe.

All as per serial item No 144 here-in-before but for 250 mm bore pipe.

S&F rubber lined non return valve, B-02 (Ball Type) for 80 mm bore size, cast iron body, flanged end, including neophrene ball and by pass arrangement complete including suitable flanges, nuts, bolts, washers and rubbber gaskets including dismantling and taking down old unserviceable non return valve all as specified and as directed.

All as per serial item No 147 but 100 mm bore.

All as per serial item No 147 but 150 mm bore.

M&L for cast iron body, ball type, foot valve, flanged B-05(N) of 80mm bore size, including suitable flanges, nuts, bolts, washers and rubbber gaskets including dismantling and taking down old unserviceable foot valve all as specified & as directed.

All as per serial item No 150 but 100 mm size.

All as per serial item No 150 but 150 mm size.

All as per serial item No 150 but 200 mm size.

Cleaning of area around OH tanks, UG sumps, water supply installations by cutting and dressing of the existing vegetation (i.e. Small trees/ bushes/ plants/ grass, etc) and removing the same from premises all as specified and as directed.

M&L for chamber cover, fabricated out of angle iron of size 40mm x 40mm x 6 mm in framework, 3mm thick MS sheet cover, flat iron 40mm x 6mm all around and diagonally and hinged to the angle iron frame work with locking arragements and handle, duly painted with two coats of anticorrosive bituminous paint over a coat of anticorrosive bituminous primer and fixed in PCC 1:2:4 coping, plaster and white wash etc complete including taking down existing chamber cover all as specified and as directed.

Supply only calcium hypo chlorite, dry free flowing and free from lumps of following generic specification : (a) Aailable Chlorine - Min 65 % (b) Particle size ( passing through 1.70 mm IS sieve) - min 99.5 % (c) water insoluble matter - max 6% (d) calcium hydroxide - max 4% (e) Sodium chloride - 15% complete all as specifed and diected . Make : Any make approved by E-in-Cs Branch .

M&L for dewatering, cleaning of OH reservoir, 1,00,000 gallons capacity, with staging of tank exc 15 m but not exc 24 m at location 'AC Depot pump house with high pressure jet to remove all mosses, algae, dirt, deposits and other sediments, scrubbing of internal surface with steel wire brush and removal of dirty water with sludge machines / industrial vacuum cleaners and disposal of the same to a safe distance including , sterilizing the complete, internal surface of the tank by using ISI mark, Grade-I bleaching powder / Liquid Chlorine, wash with fresh water, drying up and writing the words on external wall at visible place ''Military Engineer Services, Tank Capacity & Date of Cleaning'' using synthetic enamel paint in white colour over black background and letters of height 50 mm height and 40 mm width complete all as specified and as directed.

All as per serial item No 157 but OH reservoir 50,000 gallons capacity with staging of tank exc 15m but n exc 24m at location 'AC Depot Pump House & CQA(V)' .

All as per serial item No 157 but UG Sump of 14,00,000 gallons capacity at location ' Dhobhighat Pump House'

All as per serial item No 157 but UG Sump of 8,00,000 gallons capacity at location ' Bhingar Pump House'

All as per serial item No 157 but UG Sump of 5,00,000 gallons capacity at location ' KLP, Dhobighat'

All as per serial item No 157 but UG Sump of 4,00,000 gallons capacity at location ' Jk Road family qtrs'

All as per serial item No 157 but UG Sump of 2,50,000 gallons capacity at location ' Dhobighat Pump House'

All as per serial item No 157 but UG Sump of 1,50,000 gallons capacity at location ' AC Depot Pump House'

All as per serial item No 157 but UG Sump of 75,000 gallons capacity at location ' AC Depot Pump House'

All as per serial item No 157 but UG Sump of 30,000 gallons capacity at location 'Bhingar Pump House'

M&L for preparation of old steel surfaces of ladder for 20m staging of overhead water tank and applying one coat of synthetic enamel black paint all as specified and as directed.

M&L for PVC netlon jallies with wooden battens of sectional area n exc 13 Sqcm, wooden beads n exc 75 mm girth duly fixed with nails, and fitted on top entry of over head reservoir and specified windows to prevent entry of birds/dirty particals all as specified and as directed.

M&L for taking down carefully, existing unservicable water level Indicator from OH tank/ UG sump and repair with and including replacement of steel wire 4mm dia (8 SWG), MS V shaped pully 3 NOs, PVC Float 01 Nos, MS indicator, scraping, cleaning and painting steel surfaces complete, marking levels with night glow radium paint and fixing in position and testing for proper function complete all as specified and as directed.

M&L for complete removal of old paint by scrapping, cleaning steel surface, preparation and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

M&L for complete removal of old paint by scrapping, cleaning gun metal surface of sluice valves/non return valves of any size, preparation and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

M&L for preparation of old external surfaces of MS ERW pipes exc 10 cm width or girth and applying one coat of black bituminus paint complete all as specified and as directed.

M&L for complete removal existing paint, preparation of old steel and iron surface of any description over 10cm width or girth and applying two coats of synthetic enemel paint over a coat of zink cromate primer complete all as specified and as directed.

M&L for new electric sign board of mild steel sheet, fabric material of size 6 feet X 4 feet, write down MILITRY ENGINEER SERVICES, GARRISON ENGINEER (SOUTH) AHMEDNAGAR and the name of the pump house will be given by department with corps of Engineers logo, fixed at existing site and suitable panel wiring with electric LED tube light fittings of 20 watt - 04 Nos complete including dismantling old board of any size and any type all as specified and directed.

Supply and laying in trenches or fixing or passing through pipe, 1100 Volts grade, armoured, heavy duty LT UG cable of size 120 Sqmm, 3.5 core with XLPE insulated stranded aluminium conductor including cable gland, lugs, testing and commissioning including taking out existing cable alongwith protection covers complete all as specified and as directed.

Supply and laying DWC HDPE pipe (PE 100,SDR-21,6 Kgf/Sqcm), IS 4984-2016)110 mm dia for laying of LT cables etc complete with all accessories all as specified and as directed.

M&L for providing and fixing stainless steel railing made of hollow tubes, channels, plates for ladder / part of ladder for OH reservoirs/ having staging up to 24 mtrs or underground sumps, with stainless steel including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories on wall/floor and taking out old rusted iron ladder complete all as specified and as directed.

Supply, install, testing and commissioning factory made and tested (including CPRI type test certified) LT Panel box Indoor type, floor mounted, compartmantalised and IP-54 suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system, all as specified and directed, having bus bar chamber with insulated Allumanium bus bars of size 25 X 5mm/ 30 X 10mm installed on porcelain insulators. The panel shall be dust and vermin proof, made of 3.15 mm CRCA MS sheet and with base frame of 40x40x6mm angle iron , powder coated, front and rear opening type with aprons for cable entry with double door shutter and locking arrangement comprises of following items including taking down existing panel box with framework 1250mm (W) X 1000mm (H) X 500mm (D) all as specified and as directed. Location : KLP Pump House Main In comer :- (a) MCCB 250 Amps, 3 pole, 36 KA, 415 volts grade,( DN2 200 - 250 A) with thermal magnetic - 01 No (b) Digital Volt meter and Amp meter - 01 Nos ,415 volts, 50 Hz AC supply -01 set. (c) Neon indicating lamps (R, Y & B) -01 Set. (d) 6 A , sp mcb - 04 Nos, (e) CT. 200/5 A - 03 No OUTGOING :- a)MCCB 160 A, TP , 36 KA, with Spreder set DZ1 108-160 - 02 Nos , b) 80 A CONTACTOR - 04 Nos c) 70 A CONTACTOR - 02 Nos d) S-D TIMER - 02 Nos e) Tharmal Overload Relay 45-75 - 02 Nos f) Analouge Ammeter with ASS - 02 Nos , g) C.T. 150/5 A - 06 Nos h) PUSH BUTTON LED - 04 Nos i) TRIP INDICATOR - 02Nos j) Starter 75 HP FASD Fully automatic star delta starter Make - L&T - 01 set Note : Panel design shall be approved by GE.

Supply , Installation ,Testing & Commissioning of factory made cubical feeder piller box ourdoor double door type CPRI approved with front open including door locking arrengement. The panel shall be dust and vermin proof, made of 3.15mm CRCA MS sheet and with base frame of MS flat iron 40mm x 6mm & angle of MS flat iron 40mm x6mm & angle of 40 x40 x6mm frame with legs of 450mm long embedded in PCC (1:2:4) type B2 platform of suitable size including necessary excavation & earth work, and dust & vermin proof painted outside & inside with one coat of Red oxide & two coats of approved make gray enameld paint complete pre wired with suitable size of copper conductor & Aluminium bus bar strip connection for all switchgear including jointing material for UG cables & aluminium lugs & commissioning of the APFC PANEL with metalized Polypropylene heavy duty CAPACITOR and MCCB as INCOMER for 3 phase 440 V 50 HZ system for permissible non liner load 15% of 100 KVAR with 5 steps complete including dismantling old panel rall as specified and directed. (Location : Bhinghar pump House)

Supply , installation ,testing & commissioning of factory made cubical feeder piller Box Ourdoor double Door Type CPRI approved with front open including door locking arrengement. The panel shall be dust and vermin proof, made of 3.15mm CRCA MS sheet and with base frame of MS flat iron 40mm x 6mm & angle of MS flat iron 40mm x6mm & angle of 40 x40 x6mm frame with legs of 450mm long embedded in PCC (1:2:4)b type B2 platform of suitable size including necessary excavation & earth work , and dust & vermin proof painted outside & inside with one coat of Red oxide & two coats of approved make gray enameld paint complete pre wired with suitable size of copper conductor & Aluminium bus bar strip connection for all switchgear including jointing material for UG cables & aluminium lugs & commissioning of the APFC PANEL with Metalized poly propyleneheavy duty CAPACITOR AND MCCB as INCOMER for 3 phase 440 V 50 HZ system for permissible non liner load 15% of 65 KVAR with 4 steps complete including dismantling old panel all as specified and directed. (Location : KLP Pump House)

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, pendants, regulators, sockets etc but excluding DBs, light fittings etc and making good disturbed surfaces of walls, floors etc. and matching with existing surface all as specified and as directed.

M&L for point wiring complete with 1.5 Sqmm single core, multistranded, copper conductor, FRLS, PVC insluated and unsheathed cable 650/1100 volts grade,conforming to IS-694 1990, drawn through and including casing capping 25mm/32 mm width with all accessories as specified with modular cover plate with frame and modular metal flux boxes, blank plate for mounting fittings & fixing like switches sockets and fan regulators etc. including copper earth continuity wire for PVC insulated of size 1.5 Sqmm for one light point controlled by one way switch complete all as specifed and as directed.

All as per serial item No. 182 but for one 5 Amp, 5 pin socket outlet point on same board with other switches including earth wire as specified.

All as per serial item No. 182 above but for one 3 pin socket outlet, 5 Amps on independent board but below the switch board of light points in the same vertical plane/horizontal plane, with cables, 1.5 sq. mm size

All as per serial item No. 182 but for one light point controlled by 2 way switches.

All as per serial item No. 182 but for one bell/buzzer point controlled by one push button on the same board with other switches or independent.

All as per serial item No. 182 but with 2.5 Sqmm on independent board.

All as per serial item No. 182 but for one 3 pin socket outlet, 5 Amps on independent board but below the switch board of light points in the same vertical/ horizental plane, with cables, 2.5 sq. mm size

All as per serial item No. 182 but with 4 Sqmm, PVC copper stranded cable FRLS type for phase, neutral and earth for one 15 Amp, 6 pin socket on independent board.

S&F lamp holder insulated, PVC / polycarbonate / bakelite body complete all as specified and as directed.

S&F ceiling rose surface bakelite 65x50mm, three terminal complete all as specified and as directed.

S&F switch piano, flush button, 5 Amp, single pole, one way, 230 volts, white finish, all as specified & as directed.

S&F bell push, flush type, 5 Amp, single pole, 230 volts, white finish all as specified & as directed.

S&F switch piano, flush button, 5 Amp, single pole, 2 way, 230 volts, white finish all as specified & as directed.

S&F socket outlet, flush type, 5 pin, 5 Amp, multipurpose, 230 volts, single pole, one way suitable for 3 pin/2pin, 5 Amp plug top white/ivory finish all as specified & as directed.

S&F switch socket combination, flush type, 5 pin, 5/6 Amp, multipurpose, 230 volts, single pole, one way, suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & as directed.

S&F switch socket combination, multipurpose, flush type, 2 in 1 type (6 pin ) 5/15 Amps, 230V, AC. all as specified & as directed.

S&F fan regulator, step type, electronic on existing phenolic laminated sheet, 5 step, socket type, 230 volts, 450 watts, suitable for ceiling fan 1200/1400mm sweep all as specified & as directed.

S&F bell, AC, 230 volts, single phase complete all as specified and as directed.

S&F in repairs, single pole & neutral DB, 4 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 100 Amp rating copper bus bar complete all as specified and as directed.

S&F in repairs, single pole & neutral DBs, 8 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 100 Amp rating copper bus bar complete all as specified and as directed.

S&F in repairs, factory made, sheet steel distribution boards, TPN, 4 Way, protection class IP-43 with min 100 Amp rating copper bus bar, provision for FP MCB as incomer and SP MCBs as outgoing complete complete all as specified and as directed .

S&F in repairs, MCCB four pole 63A, Icu 16KA, thermal magnetic, 415v AC complete all as specified and as directed.

S&F in repairs, MCCB four pole 100A, Icu 16KA, thermal magnetic, 415v AC complete all as specified and as directed.

S&F in repairs, MCBs, SP 6 to 32 Amps, 10 KA, IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed.

S&F in repairs, MCB, SPN 32 Amps, 10 KA, 'C' curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed.

S&F in repairs, MCB, SPN 40 to 63 Amps, 10 KA, 'C' curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed.

S&F LED tube light fitting 20 Watt with LED light source 6500k with uniform light output,with all accessories including its connection with 3 core seathed copper conductor cable of size 0.5 sqmm with complete with all as specified and as directed.

S&F LED tube light fitting 10 Watt with LED light source 6500k with uniform light output,with all accessories including its connection with 3 core seathed copper conductor cable of size 0.5 sqmm with complete with all as specified and as directed.

S&F in replacement INVETER LED tube light fitting, 20 Watt with lITHIUM Ion battery with charging time 8 to 10 hrs and back up time upto 4 hrs LED light source 6500k with uniform light output,with all accessories including its connection with 3 core seathed copper conductor cable of size 0.5 sqmm with complete with all as specified and as directed.

S&F in repairs, security light fitting of building with single piece new generation energy savng and environmental friendly, long life, LED 30W, made up of pressure die cast aluminium housing with acrylic covers as diffuser with IP66 protection and impact resistance of IK07 including one bracket made of light grade GI Pipe 25 mm dia, 1.5 mtr long, fixed to wall/ pole with two clamps made out of mild steel flat iron 40 mm x 5 mm and connect to nearest electric supply by two core 1.5 sqmm aluminium cable all as specified and as directed.

M&L in replacement for earthing complete with GI earth plate electrode of size 60cm x 60cm x 6 mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers etc and connected to and including 4mm dia GI wire upto 7.5 m by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 15mm dia GI pipe connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, charcoal,salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 complete all as specified and as directed.

S&F in repairs, LED post top lantern, 20 watt, 230 Volt AC with decorative post top 360 degree indirect light, IP 65 protection with impact and corrosion resistant complete all as specified and as directed.

S&F in repairs, 40 mm bore dia GI pipe, light grade, laid in trenches / fixed to Pole / wall for cable protection complete all as specified and as directed.

S&F in repairs, PVC insulated, sheathed cable with stranded aluminium conductor service cable of size 2.5 sqmm, two core complete all as specified and as directed.

S&F in repairs, PVC insulated, sheathed cable with stranded aluminium conductor service cable of size 4 sqmm, two core complete all as specified and as directed.

S&F in repairs, PVC insulated, sheathed cable with stranded aluminium conductor service cable of size 6 sqmm, two core complete all as specified and as directed.

M & L for sub main wiring with 2 runs of 4 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor FRLS multi stranded drawn in and including 20 mm dia non metallic PVC grey conduit conforming to IS-9537 / suitable size casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduitcomplete all as specified and as directed. Note : Three runs of 4 Sqmm cable and one run of PVC conduit will be measured as one Rm unit.

M&L for sub main wiring with 2 runs of 6 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor FRLS multi stranded drawn in and including 20 mm dia non metallic PVC grey conduit conforming to IS-9537 / suitable size casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit complete all as specified and as directed. Note : Three runs of 6 Sqmm cable and one run of PVC conduit will be measured as one Rm unit.

M&L for sub main wiring with 2 runs of 10 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor FRLS multi stranded drawn in and including 20 mm dia non metallic PVC grey conduit conforming to IS-9537 / suitable size casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 10 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduitcomplete all as specified and as directed. Note : Three runs of 10 Sqmm cable and one run of PVC conduit will be measured as one Rm unit.

Mangesh Murlidhar Darwade

M/S CHHTRAPATI CONSTRUCTION

M/s. Shahabad Enterprises