SPECIAL REPAIRS TO AIRMEN MESS AND BILLETS AT AF STN MUMBAI UNDER GE AF THANE

Amount

Taking down cement plastering on brick walls/stone walls/ ceiling etc incl racking out of joints hacking for key scrubbing down with water and disposal of rubbish out of the MOD land complete all as specified and directed by Engr-in-charge.

M&L for rendering 10mm thick in cm 1:6 on fair faces of brick work or concrete surfaces of wall and finishing the surface with neeru etc complete all as specified and directed by Engr-in-charge.

M&L for preparation of old plastered or unplastered surfaces of walls including complete removal of exsting treatment and apply two coats of distemper oil emulsion including a coat of alkali resistant primercomplete all as specified and directed by Engr-in-charge.

M&L 3mm thick wall care putty on wall complete all as specified and directed by Engr-in-charge

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed by Engr-in-charge

Demolition of Cement Concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-charge

M&L for 90 mm thick cement concrete (1:2:4) type B-1 (20mm graded stone aggregate) as in sub base complete all as specified and directed by Engr-in-charge..

S&F welded steel wire fabric exceeding 4 Kg weight per sqm of 25x25 mm size and dia of wire is 3 mm complete all as specified and directed by Engr-in-charge

M & L for coloured glazed ceramic tiles 300x600x7 mm,350x250x7mm or 450x350x7mm thick, in vertical surface ( dado/ skirting and similar works) , jointed neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-charge

M&L Vitrified tiles 600x600x10mm thick, light shade , polished, in floors etc set and jointed in neat cement slurry and pointed in white or coloured to match over & including 15mm thick screed bed in CM 1:6complete all as specified and directed by Engr-in-charge

M&L (mirror polished ) Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-charge.

M&L for machine cut kota stone slab 20-25mm on risers, skirting,etc thick over cement backing coat and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed by Engr-in-charge.

M&L Granite (of any type) tiles 16 mm thick machine cut, bedded and jointed with grey cement slurry and rounding of edges and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified and directed by Engr-in-charge.

M & L for 20-25 mm thick machine cut , cuddappah stone slabs in shelves, window and door linings, flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl grinding polishing and rounding of edges complete all as specified and directed by Engr-in-charge

M& L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes.for cement mortar (1:6) complete all as specified and directed by Engr-in-charge.

M& L for backing coat rendering 10 mm thick on fair face of brick work or concrete surface, CM (1:4) complete all as specified and directed by Engr-in-charge

Removing excavated material/debris exc. 1.50 km but n exc. 5 km and depositing out side MD land complete all as specified and directed by Engr-in-charge

M & L cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed by Engr-in-charge.

Taking down 15mm bore steel tubing & connection including cleaning for re-fixing or removal from site complete all as specified and directed by Engr-in-charge.

Taking down 20mm bore steel tubing and connection including cleaning for re-fixing or removal from site complete all as specified and directed by Engr-in-charge.

All as per item above but bore of pipe 25 mm complete all as specified and directed by Engr-in-charge.

M&L for 15mm bore medium grade GI tubing with all fittings fixed to walls and ceiling or laid in floors complete all as specified and directed by Engr-in-charge

-Ditto- as above but except pipe 15mm dia complete all as specified and directed by Engr-in-charge.

M&L for 20mm bore medium grade GI tubing with all fittings fixed to walls and ceiling or laid in floors complete all as specified and directed by Engr-in-charge

-Ditto- as above but except pipe 20mm dia complete all as specified and directed by Engr-in-charge.

All as per item above but bore of pipe 25 mm complete all as specified and directed by Engr-in-charge

S&F in repair Gun metal, gate valve with iron wheel head, screwed both ends for iron pipe of 20 mm dia complete all as specified and directed by Engr-in-charge.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position Exc 1000 & n exc 2000 ltrs. (Cleaning repairing etc. measured separately) complete all as specified and directed by Engr-in-charge.

Dismantling water tanks and removing to store of capacity 2000 ltrs complete all as specified and directed by Engr-in-charge

Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc complete all as specified and directed by Engr-in-charge.

S&F PVC water tank for capacity 2000 in litres rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position with and including PVC ball float valve complete all as specified and directed by Engr-in-charge.

M & L for 15 mm bib taps in repair, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-charge.

M & L for 20 mm stop valves in repair, cast copper alloy screwed down, high pressure, with crutch or but - terfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-charge.

M&L in repairs vitreous china urinals, bowl type of 465x355x265 mm. (back or corner wall type ), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1: 2,securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets flush pipe grating and Union for discharge pipe. grating and Union for discharge pipe (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed by Engr-in-charge.

M&L in repairs wash basins, Vitreous China 550x405mm (under counter wash basin type) any size, including cutting for and pinning in ends of brackets or erecting stand inclusive of supply and fixing of heavy duty waste pipe complete. [ Make: Cera New Cat No: S2030105 or equivalent ] complete all as specified and directed by Engr-in-charge.

S&F 15 mm bore (fancy type) pillar tap for wash basin. [ Make: Jaguar Product Code :CON-CHR-021KN or equivalent ] complete all as specified and directed by Engr-in-charge.

M&L black granite (of any type) 25 mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust and rounding of edges with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-charge.

S&F in repair brass chromium plated bottle trap for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete complete all as specified and directed by Engr-in-charge.

S&F in repair wash down water closet (pedestal pattern) including seat cover complete all as specified and as directed complete all as specified and directed by Engr-in-charge.

S&F low level flushing system plastic valveless syphonic action type white with inlet ball valve float chain and ball (of capacity 10 ltrs ISI marked incl 32mm PVC flush pipe as in repairs complete all as specified and directed by Engr-in-charge.

S&F brass chromium plated shower rose 125mm size fixed as in repairs complete all as specified and directed by Engr-in-charge.

S&F in repair Stainless Steel Towel Ring/Hanger For Bathroom 4 inch 1 Bar Towel Rod complete all as specified and directed by Engr-in-charge

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints , laid in trenches / floors or fixed to walls complete all as specified and directed by Engr-in-charge.

Ditto as Items above but 75 mm bore complete all as specified and directed by Engr-in-charge.

S&F in repairs 110 mm bore PVC (SWR) bends complete all as specified and directed by Engr-in-charge .

S&F in repairs 75 mm bore PVC (SWR) bends complete all as specified and directed by Engr-in-charge.

S&F 32mm high density polythylene pipes (HDPE) of pressure rating 6kg/sqcm fixed complete to walls ceiling or in floors etc complete all as specified and directed by Engr-in-charge.

S&F in repairs 110 mm bore PVC (SWR) branch pieces,single (single Y) equal or unequal complete all as specified and directed by Engr-in-charge

S&F in repairs 75 mm bore PVC (SWR) branch pieces,single (single Y) equal or unequal complete all as specified and directed by Engr-in-charge

S&F in repairs 110 mm bore PVC (SWR) junction ,single (single T) equal or unequal complete all as specified and directed by Engr-in-charge

S&F in repairs 75 mm bore PVC (SWR) junction ,single (single T) equal or unequal complete all as specified and directed by Engr-in-charge

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed by Engr-in-charge.

M & L for 100mm cast Iron floor trap, with grating including jointing to waste pipes fixed in concrete type B-1( 1:2:4) complete all as specified and directed by Engr-in-charge.

M & L for PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement with grating including jointing to waste pipes fixed in cm type B-1( 1:2:4) complete all as specified and directed by Engr-in-charge.

M&L 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed by Engr-in-charge.

S&F anodised aluminium snap grid frame work for false ceiling complete all as specified and directed by Engr-in-charge

M&L10 mm thick gypsum boards fixed or laid/inserted to timber/GI/Aluminium/Steel frame work with screws or like in ceiling complete all as specified and directed by Engr-in-charge .

M&L for preparation pf surfaces of gypsum board in ceiling and applying two coats of OBD over a coat of primer over a thin layer of wall care putty complete all as specified and directed by Engr-in-charge.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, holder, bell,bell push,regulators, sockets etc removing materials for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed by Engr-in-charge

Taking down unservicable/partly unservicable light fittings any type, tube light fitting and fixtures, etc, and making good to the disturbed surfaces of walls/floor etc to macth with existing surfaces including white washing/colour washing/distempering to match with existing wall/floor/ceiling finishes.

Dismantling unserviceable main switch/ kitkat DBs/ MCB including wooden board from existing position and making good disturbed surfaces of wall to match with existing surfaces complete all as specified and directed by Engr-in-charge

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces complete all as specified and directed by Engr-in-charge.

Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm stranded for earth continuity wire, to be drawn in and including, PVC medium grade onduit not less then 20 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified Make of cable - FINOLEX / PLAZA / HAVELLS & Make of PVC conduit & conduit accessories - PLAZA /FINOLEX/BERLIA. Note : (1) Making good to match with the adjoining surface shall be included in the unit rate. (2) Rate is inclusive of Cutting/chases of wall/floor/ceiling complete all as specified and directed by Engr-in-charge (a)One light point controlled by one, one way switch

(b) One ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and directed by Engr-in-charge

(c) one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed by Engr-in-charge.

(d) One3 pin 5 amps socket out let point on independent board complete all as specified and directed by Engr-in-charge

All as per same in item No 5(a) above but for one socket outlet 15 Amp on independent board with 2.5 Sq mm cable and 1.5 Sq mm earth wire complete all as specified and directed by Engr-in-charge.

S &F Switch piano flush type single pole one way 5 amps complete all as specified and directed by Engr-in-charge.

S &F Socket out let 2 in one, 5/3 pin 5Amp complete all as specified and directed by Engr-in-charge

S &F Switch socket combination 5 Amps 5 pin flush type complete all as specified and directed by Engr-in-charge

S &F Switch socket combination 5 in 1, 5 pin 5/15 Amps flush type universal complete all as specified and directed by Engr-in-charge.

S &F Ceiling rose, surface bakelite 65x50 mm three terminal complete all as specified and directed by Engr-in-charge

S &F Electronic regulator 100/120 Watt step type complete all as specified and directed by Engr-in-charge

S & F LED light fittings decorative 36/34 Watt surface/recess mounting type extruded metal/aluminium body, and electronic LED driver, connector block ect. with all accessories internal prewired & including connecting up with 2 core flexible cppper conductor cable with suitable size and mounting clamps etc complete all as specified and directed by Engr-in-charge.

S &F LED tube light fittings decorative ultra slim linear fixture with extrudedalluminium heat sink envioromentel friendly Energy efficient ready to use pack ,1x20/18 Watt ,4 feet,surface mounting type extruded pvc, snap on installers and domestic electronic Driver ,connector block ect.with all assoceries intenallt prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75x75mm - 2 nos etc complete all as specified and directed by Engr-in-charge.

S &F earth enclosure with 2 pin earth plug sokcet complete with MCB SP 25 amp,flush mounting type LEGRAND/ABB/L&T cat no-LTMP120N complete all as specified and directed by Engr-in-charge

Taking down ceiling fan/wall fan /EXHAUST FAN of any size or make complete all as specified and directed by Engr-in-charge

Hanging only wall fan/ceiling fan 1200mm Sweep by providing fan hooks in proper manner and making connection withT 3 core copper cable including painting complete all as specified and directed by Engr-in-charge.

Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sqmm, earth continuity conductor of size 2.5 Sqmm to be drawn through in and including PVC conduit on walls/roof/floors all as directed by Engineer in Charge.Notes:- (i)Two wires of 4 sqmm and one wire of 2.5 sqmm shall be measured as one unit complete all as specified and directed by Engr-in-charge.

Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 6 Sqmm, earth continuity conductor of size 4 Sqmm to be drawn through in and including PVC conduit fixed on walls/roof/floors all as directed by Engineer in Charge.Notes:- (i)Two wires of 6 sqmm and one wire of 4 sqmm shall be measured as one unit complete all as specified and directed by Engr-in-charge.

MCCB DB VERTCLE TYPE made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, IP-43-IK09 protection grade , 415Volts TPN with 4 way Double door , L&T CAT NO-DBVTH004DD/ / LEGRAND CAT NO-607913/ equivalent of ABB complete all as specified and directed by Engr-in-charge

MCB DB made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, earth bar and Din rail ,240Volts SPN with 8 way Double door , IP-43-IK09 protection grade,L&T CAT NO-LTSD08GN/ / LEGRAND CAT NO-607711/ equivalent of ABB complete all as specified and directed by Engr-in-charge

MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 6-32Amps complete all as specified and directed by Engr-in-charge

MCB SP 6-32 Amps 'C' series, breaking capacity 10 KA of rating complete all as specified and directed by Engr-in-charge

MCCB TPN 160 Amps , 415Volts, 25KA ,4 POLE L&T CAT NO-CM90634OOMO/ LEGRAND CAT NO-420057 / equivalent of ABB complete all as specified and directed by Engr-in-charge

Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00 mm dia by means of bolts, nuts, check nuts and washers complete up to and including test point made out of 40 x 6 mm alum flat including earthing pit, charcoal common salt, Earthing lead 4.00 mm dia up to 7.5 m, 20 mm dia medium grade GI watering pipe, G.I. protection pipe 15 mm dia up to 7.5 m long, PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate, PCC pit cover including earth work complete all as shown in electrical plate No-5 of SSR-2009 (Part-I) complete all as specified and directed by Engr-in-charge

Atharva Enterprises