REPAIRS TO FLOORING, SANITARY FITTINGS, PLUMBING WORKS, JOINERY WORKS AND OTHER ASSOCIATED WORKS IN CERTAIN BUILDINGS IN CERTAIN UNIT UNDER GE KAMPTEE

Amount

Dismantling of floor, hearth or wall tiles including cement mortar bedding, but not backing complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 300x 450x 6-7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10mm thick in cement mortar (1:4) complete all as specified and directed.

M&L for non skid ceramic tiles 7 to 8mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jounted neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layers of cement mortar (1:6) for laying of floor finishes complete all as specified and directed.

All as per item No 3 above but as in skirting with 10mm backing in cement mortar (1:4) complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm cement screed bed in cement mortar (1:6) complete all as specified and directed.

Demolition of cement concrete any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete /sub base complete all as specified and directed.

M&L for 75mm thick cement concrete (1:2:4) type B2 (using 40mm graded stone aggregate) as in PCC path/ hard standing finished fair and even complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and pigment finished with coloured rubber finish on top finished over sand dust cushion of 50mm thick complete all as specified and directed. Note:- Sand cushion will be measured and paid separately.

M&L for sand filling under cushion of paver blocks complete all as specified and directed.

M&L for chequred tiles 300 x 300 x 25mm thick, coloured, rubber finished, set jointed and pointed in neat and cement slurry in floors with grey cement and pigment complete including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for providing cement concrete (1:3:6) type C1 (using 20mm graded stone aggregate) as in copings, plinth courses including weathering, slightly rounded or chamfered angles and throating on edges complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) pipes single socket in any length with rubber joint fixed to wall as waste and rain water pipe in any height complete all as specified and directed.

S&F in repairs 110mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair PVC clamps for 110mm dia PVC pipes of any length with rubber joint fixed to wall for rain pipe of any height fixing with necessary screws bolts etc complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) pipes single socket in any length with rubber joint fixed to wall as waste pipe in any height complete all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair PVC clamps for 75mm dia PVC pipes of any length with rubber joint fixed to wall for rain pipe of any height fixing with necessary screws bolts etc complete all as specified and directed.

S&F in repair pillar taps 15mm dia, cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwd shank and fly nut, screwed for iron pipes complete all as specified and directed.

S&F in repairs stop valve/ angle cock 15mm dia cast copper alloy, chromium plated, fancy type, high pressure with crutch or butter fly handle screwed for iron pipe or union and fixed complete all as specified and directed.

All as per item No 20 above but concealed type complete all as specified and directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern) 'P' or 'S' trap including jointing, including plastic water closet seat, closed pattern with flat bottom, cover and mild steel CP or aluminimised hinging device complete all as specified and directed.

S&F in repairs vitreous china squatting pan 'Orissa' pattern, 580 X 440mm long with integral foot rest, S or P trap including connection to trap and to flushing pipe etc complete including making good to floor complete all as specified and directed.

S&F in repair Vitreous china urinal, half stall pattern, white (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and urinal spreader complete all as specified and directed.

S&F in repairs wash hand basin (flat back or angle back) of size 550 x 400mm, white including, waste coupling, chain and plug, porcelain stopper including for & pinning in ends of brackets including supply & fixing of waste pipe complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specified and directed.

S&F chromium plated shower rose with or without swivel joints of 125mm dia including fixing to 15mm bore of pipe complete all as specified and directed.

S&F in repair health faucet of 15mm bore brass chromium plated including PVC pipe to connection GI tubing 15mm bore complete all as specified and directed.

S&F in repairs towel rail 20mm dia of chromium plated fixed with and including chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed.

S&F in repairs bib tap 15mm dia cast copper alloy, chromium plated, fancy type with crutch or butter fly handle screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15mm bib tap of PTMT any colour high pressure screwed for iron pipe (Minimum weight 15mm - 90 gms) complete all as specified and directed.

S&F in repair 15mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 90gms) complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair corrugated waste pipe of size 40x 800mm for kitchen sink and wash basin etc complete all as specified and directed.

S&F in repairs 20mm dia stainless steel curtain rod of approved quality including cutting and fixing to curtain brackets complete all as specified and directed.

S&F for fancy type curtain brackets approved quality fixed to wall with screws complete all as specified and directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed to wall including taking up or down existing GI tubing complete all as specified and directed.

S&F GI tubing 20mm bore medium grade with all fittings and fixed to wall including taking up or down existing GI tubing complete all as specified and directed.

S&F GI tubing 25mm bore medium grade with all fittings and fixed to wall including taking up or down existing GI tubing complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layered, antibacterial, of 500 ltr capacity, hoisted and fixed in position including top cover including dismantling of existing water tank as specified in SSR part-I complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layered, antibacterial, of 1000 ltr capacity, hoisted and fixed in position including top cover including dismantling of existing water tank as specified in SSR part-I complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layered, antibacterial, of2000 ltr capacity, hoisted and fixed in position including top cover including dismantling of existing water tank as specified in SSR part-I complete all as specified and directed.

S&F 20mm bore ball valves, high pressure PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe and fixed (Minimum weight 20 mm -210 Gms) complete all as specified and directed.

All as per item No 44 above but 25mm bore complete all as specified and directed.

S&F in repairs 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm -210 Gms) complete all as specified and directed.

All as per item No 46 above but 25mm bore complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.18mm as in gauze door /window / ventilators shutters complete all as specified and directed.

M&L for complete removal of existing treatment of old plastered surfaces on wall of any description and applying two coats of oil bound distemper over a coat of wall care putty complete all as specified and directed.

M&L for preperation of old decorated surfaces and applying one coat of cement base paint on wall etc complete all as specified and directed.

M&L for preparation of old decorated surface of wall and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed.

M&L for brooming down surfaces of any description and applying one coat of white wash on old decorated surfaces of walls including preparation of old surfaces & filling cracks and holes etc complete all as specified and directed.

All as per item No 53 above but on ceiling complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description over 10cm in width or girth & applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for complete removal of existing treatment including old plastered surfaces on wall including brooming down or steel wire brushing, scraping down moulds, washing down and applying two coats of acrylic emulsion weather proof paint apex of Asian 1st quality over a coat of acrylic primer complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillar but excluding ashalar facing etc complete all as specified and directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed.

Taking down cement or cement lime plastering including roots of trees and trees of any girth, desription on brick or stone wall etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on brick or concrete surfaces in CM (1:6), finished fair and even complete all as specified and directed.

M&L for rendering 10mm thick on brick or concrete surfaces in CM (1:6), finished fair and even complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of plastered surfaces of wall & applying three coats of white wash complete all as specified and directed.

S&F in repairs grating doom 100mm dia of PTMT (Minimum Weight 25 gms) complete all as specified and directed.

S&F in repais 150mm extruded aluminium handles fabricated type anodised etc complete all as specified and directed.

S&F in repairs 150mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F in repairs 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repairs 300mm mild steel helical door spring ordinary rat tail rod including roller and roller plate complete all as specified and directed.

Taking down door / window frame with shutter (without taking of shutter from the frame) area not exc 1.5 sqm complete all as specified and directed.

Taking down door / window frame with shutter (without taking off shutter from the frame) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and not exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 2 sqm each complete all as specified and directed.

S&F steel window with side hung shutters including projecting or box stype hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer including fixing of hold fast of size 25 x 5mm flat iron etc all complete all as specified and directed.

All as per item No 73 but without glazing bars complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges peg stay to receive glazing or gauzing and one coat of primer including fixing of hold fast size 25 x 5mm of flat iron etc complete all as specified and directed.

S&F framed guard bars with mild steel square bars with ends of bars shouldered and/ or riveted and similar work confirming to Fe 290 Gde-E-165 complete all as specified and directed.

M&L for mild steel angle iron as in framed chowkats for door shutters cut to length including necessary welding and making holes for fixing butt hinges and fixing 10mm dia as tie bar complete confirming to Fe-410 -W (Gde-E-250) quality A etc complete all as specified and directed.

S&F 30mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded PVC sheet on the front face & 4mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F factory made solid PVC panelled door shutter 30 mm thick, but wire gauzed i.e. panel will be of wire gauze in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening complete all as specified and directed.

S&F factory made solid PVC panelled door shutter 30mm thick (Style) consiting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet strip of 20mm width struck inside with solvent cement for styles and plain colour PVC sheet for Top rail : panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the style and rail with suitable PVC sheet beading and jointed together with solvent cement etc fixed with frame at site complete all as specified and directed

S&F 100mm long mild steel medium weight cold rolled butt hinges and fixed with screw/ welded to frames etc complete all as specified and directed.

S&F 150mm extruded aluminium handles fabricated type anodised etc complete all as specified and directed.

S&F 125mm extruded aluminium handles fabricated type anodised etc complete all as specified and directed.

S&F 150mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

Hacking out old broken glass (any thickness size and quality and description) from wooden/ steel frames glazed with putty or fixed with beads etc complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality not exc 0.50 sqm in each pane and fixed with oil putty or with wooden beading in square etc complete all as specified and directed.

All as per item No. 90 above but figured glass complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.18mm as in gauze door /window/ ventilators shutters complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth & applying two coats of synthetic enamel paint complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for in any position complete all as specified and directed.

M&L for rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe-410 W (Gde E-250) quality B complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.45,845.00]

vidhamal&sons

DE PRETTY AND CO

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani

NORTH INDIA PEST CONTROL

M/s DS Khekde

Bidder Name

DE PRETTY AND CO

M/s B S Jain

M/s DS Khekde

vidhamal&sons

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani

NORTH INDIA PEST CONTROL