Proposed Cafeteria and Souvenir shop at Assam State Museum

Civil Works

Cement Board Barricade: Multi purpose fibre reinforced by organic fibres and/or inorganic synthetic fibres cement board 8 mm thick

ACP Cladding: Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

Partition Wall: 8 mm thick cement fibre board as per IS : 14862

MS Frame: Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Rolling Shutter: 80x0.90 mm M.S. laths with 0.90 mm thick top cover

Providing and fixing ball bearing for rolling shutters.

Tiles for kitchen Slab and damaged tiles: Size of Tile 600 x 600 mm

Drain Pipe: Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

Painting: Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm

Aluminium Work: Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Pre-laminated particle board with decorative lamination on both sides

With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm)

Supplying and Installation of centre pole umbrella (for sheding at canteen block seating) of approved brand and make

Supplying and Installation of plastic chair of approved brand and make

Supplying and Installation of plastic 4 seater table of approved brand and make

Supplying, Installation, Testing and Commissioning of Aluminium Awning of good brand and quality

Supplying and Installation of chair of approved quality

Supplying and Installation of table of approved quality

Showcase 1: Supplying and installation of showcase, as per design, made of 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of desired quality and finished with desired finish complete in all respects with all accessories, to the full satisfaction of the Architect.

Showcase 2: Supplying and installation of showcase, as per design, made of 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of desired quality and finished with desired finish complete in all respects with all accessories, to the full satisfaction of the Architect.

White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap

470x420 mm bowl depth 178 mm

32 mm dia

20 mm nominal dia Pipes

15 mm nominal bore, 90 mm long, weighing not less than 93 gms

2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. Mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

2 way 5/6 A switch

15/16 A switch

3 pin 5/6 socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. As required.: 3 Module (100mm x 75mm)

6 Module (200mm x 75mm)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required : 3 Module

6 Module

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube / lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. : Upto 450 mm sweep

Supplying, Testing and Commissioning of Ceiling Fan (1200 mm) of approved brand and make

Supplying, Testing and Commissioning of Exhaust Fan (300 mm) of approved brand and make

Supplying, Testing and Commissioning of 20 watt LED batten of approved brand and make

Wiring for circuit/ submain wiring alongwith earthwire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 2 way 5/6 A switch

3 pin 5/6 socket outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. As required. 6 Module (200mm x 75mm)

Supplying and fixing following Modular base & cover plate on existingmodular metal boxes etc. as required. :: 6 Module

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube / lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. : Upto 450 mm sweep

Supplying, Testing and Commissioning of Ceiling Fan (1200 mm) of approved brand and make

Supplying, Testing and Commissioning of Exhaust Fan (300 mm) of approved brand and make

Supplying, Testing and Commissioning of 12 watt spot light (warm white) of approved brand and make

Supplying, Installation, Testing and Commissioning of 2 watt spot light (warm white) of approved brand and make

Supplying, Testing and Commissioning of 20 watt LED batten of approved brand and make