REPAIR OF GI CHARPOY PLY TOP AND TRADE PATTERN FURNITURE ITEMS UNDER GE W) AGRA

Amount

REPAIR /CONVERSION TO CHARPOY GI PIPE PLYTOP DRG NO FD 220/220 (R)

Dismantling/ taking down existing old unserviceable plywood from GI pipe charpoy plytop and S&F new 12 mm thick BWR commercial plywood confirming to IS-303 of make Century/ Green ply /Archid of size 7' x 3' duly provided with 12mm beading chip type fixed with marine grade fevicol and best quality nails of required size all around the ply of chapory complete as shown on drg or as directed by Engr-in- Charge.

Removing / taking down old unserviceable long rail fromn charpoy GI pipe without damaging the adjoing parts and S &F new long rail of size 1980mm made out of 32mm dia bore of GI pipe medium Grade ISI marked and made to shape by threading both ends upto 22mm for fixing to elbow of Charpay GI Pipe complete all as shown on drg and as directed.

Taking down old u/s short rail and Cutting old broken u/s dismantled long rail obtain from ser Item 1.02 above and convert into short rail including threading ends upto 22 mm for fixing to elbow of charpoy GI pipe complete all as shown on drg and as directed.

Taking down u/s legs and Cutting old unserviceable short rail obtained from ser Item 1.03 above and convert into legs including threading ends upto 22 mm for fixing to Charpoy GI Pipe complete all as shown on drg and as directed.

Taking down old unserviceable elbow from charpoy without damaging the adjoing parts and S&F new 3 way elbow GI medium grade ISI Marked suitable for 32 mm bore GI pipe complete all as shown on drg and as directed.

Taking down old unserviceable Check nut from charpoy without damaging the adjoing parts and S&F new GI Check nut medium grade ISI Marked suitable for 32 mm bore GI pipe complete all as shown on drg and as directed.

S & F in new 2 mm thick iron clamp duly painted with black enamel paint for support of FMN set of required size and shape on new legs installed against item no 04 above complete all as shown on drg and as directed.

Taking down old u/s iron clamps from charpoy GI plytop and S&F in repair new 2 mm thick iron clamp duly painted with black enamel paint for support of FMN set of required size and shape complete all as shown on drg and as directed.

Taking down old unserviceanble broken flat iron & S/F in repair new flat iron of size 35mm x 5mm thick 900mm length on long rail duly painted with black enamel paint complete all as shown on drg and as directed.

S/F new flat iron of size 35mm x 5mm thick 900 mm long duly painted with black enamel paint on new long rail installed against item No 02 above complete all as shown on drg and as directed.

Taking down old unserviceable broken MS Angle & fixing new MS Angle ( 75mm length) of size 35mm x 35mm x 5mm thick with required size of nut and bolt including welding , painting and making holes by drilling complete all as shown on drg and as directed.

S/F new MS Angle ( 75mm length) of size 35mm x 35mm x 5mm thick on new long rail and short rail installed against item No 02 & 03 above with requiired size of nut and bolt including welding , painting and making holes by drilling complete all as shown on drg and as directed.

S&F 1.6 mm thick, 40 mm dia MS Sheet base plate welded on open end of legs of GI charpoy complete all as specified and directed by Engr in charge.

Chair revolving executive

Removing of old unsv cushion seat from chair and supply & fixing new cushion seat as per existing size and shape duly coverd with best quality of approved leatherite complete all as specified and as directed by Engr-in-Charge.

Removing of old unsv cushion back from chair and supply & fixing new cushion back as per existing size and shape aduly coverd with best quality of approved leatherite complete all as specified and as directed by Engr-in-Charge.

Removing of old unsv arms from chair and supply & fixing new arms as per existing size and shape providewith cushion duly covered in best quality approved leatherite complete all as specified and as directed by Engr-in-Charge.

Removing of old unsv castors wheel from chair and supply & fixing new twin wheel castors as per existing size and shape complete all as specified and as directed by Engr-in-Charge.

Removing of old unsv five Pronged base and new 5 pronged base 10.5mm dia forged bright zinc plated MS castor pin is of press fitted into each prong for holding the castors as specified and directed.

Removing and S & F of new hydraulic mechanism /gas lift of 100mm stroke length and gas pressure of 300n force as existing.

M & L for de-rusting, denting, scrapping of all MS portion exposed to view and applying two coat of synthetic enamel paint by spray painting of approved shade as specified and directed.

chair computer

Removing of old unsv cushion seat from chair and supply & fixing new cushion seat as per existing size and shape alongwith approved coloured fabric complete all as specified and as directed by Engr-in-Charge.

Removing of old unsv cushion back from chair and supply & fixing new cushion back as per existing size and shape alongwith approved coloured fabric complete all as specified and as directed by Engr-in-Charge.

Removing of old unsv arms from chair and supply & fixing new arms as per existing size and shape complete all as specified and as directed by Engr-in-Charge.

Removing of old unsv castors wheel from chair and supply & fixing new twin wheel castors as per existing size and shape complete all as specified and as directed by Engr-in-Charge.

Removing of old unsv five Pronged base and new 5 pronged base 10.5mm dia forged bright zinc plated MS castor pin is of press fitted into each prong for holding the castors as specified and directed.

Removing and S & F of new hydraulic mechanism /gas lift of 100mm stroke length and gas pressure of 300n force as existing.

M & L for de-rusting, denting, scrapping of all MS portion exposed to view and applying two coat of synthetic enamel paint by spray painting of approved shade as specified and directed.

CHIAR VISITOR

Taking out old/unserviceable seat and supply and fix new seat of suitable size made of 12mm thick hot pressed ply wood with fabric of good quality and moulded polyurethane foam with PVC tipping all around complete al as shown on drawing

All as per item No 4.02 above but unserviceable back complete.

Taking out old broken/u/s arm rest of chair and supply and fix new arm rest made of plyurethane and rein forced with MS insert and shall be hard scratch and weather resistant.

Preparaton of old painted suraface by scraping & rubbing and applying one coat of synthetic enamel paintof approved shade or as directed to MS tubler frame of chair complete all as specified & directed.

TABLE CENTRE TWO TIER WITH GLASS TOP

Removing of old broken table glass top and supply & fixing new table glass top of suitable size made out of 10mm thick glass made to shape with rouded edges complete al as shown on drawing

Removing old u/s leg and S & F new ss lesg of suitable size

Removing of existing unserviceable lower glass top (2nd Tier) supply & fixing new table glass top of suitable size made out of 10mm thick glass made to shape with rouded edges complete al as shown on drawing.

S & F new buffers on legs as directed by Engr-in-charge.

M & L for denting, scrapping of all SS portion exposed to view all as specified and directed.

M/S DURGA ASSOCIATES (BID ID -3148053)

KHAZAN SINGH SAWHNEY (BID ID -3141402)

sumesh furniture (BID ID -3141082)

GIRENDRA SINGH AND CO (BID ID -3140571)

M/S J J ENTERPRISES (BID ID -3141445)

Afghani Constructions (BID ID -3137279)