WELCOME MAINT AND MISC WORKS AT BAKLOH CANTT UNDER AGE(I) DALHOUSIE

Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each and all as specified .

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M S square tubes , S&F in opening as per specification & drawing given in SSR-2022. complete all as specified and directed by Engr-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M S tubes for top & bottom rails M S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck in side with solvent cement for stiles and plain colour PVC sheets 5 mm thick for top rail, lock rail & bottom rail on either side & as gap insert for tap rail & bottom rail, paneling of plain colour PVC sheets to be fitted in the MS frame walded/sealed to the stiles & rails with suitable PVC sheet beading and joined to getger with solvent cement supplying & filling in the frame at site as per specification & drawing given in SSR-2009 complete all as specified and directed by Engr-in-Charge.

S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinges pin, anodised and fixed complete all as specified and directed by Engr-in-Charge.

S&F 150 mm long aluminium handle cast type anodized all as specified complete all as specified and directed by Engr-in-Charge.

S&F 200 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed by Engr-in-Charge.

M&L for Brick work with old size burnt fly ash bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and Including demolition of stone, brick masonry built in cement mortar incl quoins, arches, etc but exceeding ashlar facing dressed stone Work complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick (in two layer of 10mm+5mm) on brick or concrete/stone surfaces in cement mortar 1:4 surface finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. Note:- Necessary additional dubbing if required will be done by contractor and nothing extra cost is admissible in this account.

M&L for rendering 15 mm thick (in two layer of 10mm+5mm) on brick or concrete/stone surfaces in cement mortar 1:6 surface finished even and smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge. Note:- Necessary additional dubbing if required will be done by contractor and nothing extra cost is admissible in this account.

M&L for rendering 15mm thick (in two layer of 10mm+5mm) on brick or concrete/stone surfaces in cement mortar 1:4 surface finished even and smooth without using extra cement complete all as specified, including Taking down cement plaster from stone/brick walls, racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge. Note:- Necessary additional dubbing if required will be done by contractor and nothing extra cost is admissible in this account.