Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.8 LAccepted-AOC | L1 | Accepted-AOC ok | |
| 2 | L2₹7.1 L+₹34,568 (5.12%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹8.9 L+₹2.2 L (32.4%)Rejected-Finance | L3 | Rejected-Finance Rejected |
Tender Value
₹7.5 L
EMD Value
₹15,085
Closing Date
1 Mar 2023, 4:00 pmClosed
Executive Engineer
Himuda Division Parwanoo
Special Repair of Swarn Jayanti Utkrist Vidyalaya in respect of Govt. Sr. Secondary School Chamian, District Solan HP Sub Head Painting, weather proof paint, plaster and tile work etc
2023_HIMUD_69055_2
PD/HIMUDA/CB/tndrntc/6740-50
Open Tender
Civil Works
Item Rate
60 days
Chamian
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,180
₹15,085
9 May 2025
20 Feb 2023
2 Mar 2023
20 Feb 2023
1 Mar 2023
20 Feb 2023
Amount
Excavation
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth upto all leads and lifts., as directed by Engineer-in-charge. All kinds of soil
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains upto all depth & width on plan including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within all leads and lifts. All kinds of soil
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering including carriage of material in all leads & lifts. : - All work up to plinth level 1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing including carriage of material in all leads & lifts. : 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 20 mm nominal size)
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth including carriage of material in all leads & lifts.: in: Cement mortar 1:4 (1 cement : 4 coarse sand Cement mortar 1:4 (1 cement : 4 coarse sand
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes including carriage of material in all leads & lifts.: in : Cement mortar 1:6 (1 cement : 6 coarse sand
15 mm cement plaster on the rough side of single or half brick wall of mix including carriage of material in all leads & lifts.: 1:6 (1 cement: 6 fine sand)
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives including carriage of material in all leads & lifts.: New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer including carriage of material in all leads & lifts.: Using M.S. angels 40x40x6 mm for diagonal braces
Centering and shuttering including strutting, propping etc. and removal of form work for including carriage of material in all leads & lifts.: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets.
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: including carriage of material in all leads & lifts.: 1:1½:3 (1 cement : 1½ coarse sand) : 3 graded stone aggregate 20 mm nominal size).
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. including carriage of material in all leads & lifts.: Finolex / Supreme 110 mm bend
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. including carriage of material in all leads & lifts. :Approved make of Jindal / TATA Confirming to BIS specifications. 15mm dia nominal bore
Providing and fixing brass bib cock of approved quality including carriage of material in all leads & lifts.: ESS-ESS/ CZAR NOVA/ ESSCO 15 mm nominal bore
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including carriage of material in all leads & lifts.: Hind ware / Cera make White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level including carriage of material in all leads & lifts.: SAIL /RINL/TISCOThermo-Mechanically Treated bars of grade Fe-500D or more.
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. including carriage of material in all leads & lifts.: confirming to BIS specifications 0.63 mm thick with zinc coating not less than 275 gm/ m²
Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete including carriage of material in all leads & lifts.: confirming to BIS specifications. 0.63 mm thick with zinc coating not less than 275 gm/m²
Providing and fixing 15 cm wide, 45 cm overall semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete including carriage of material in all leads & lifts.: 0.63 mm thick with zinc coating not less than 275 gm/m
Providing valleys of 90 cm wide overall in plain G.S.sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete including carriage of material in all leads & lifts.: confirming to BIS specifications 1.60 mm thick with zinc coating not less than 350 gm/m²
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of material in all leads & lifts. : Tata Make /RINL/SAIL ( Approved make))
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : including carriage of material in all leads & lifts.:With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of material in all leads & lifts.: Kajaria / Naveen/ Somany/ Bell
Removing dry or oil bound distemper water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. including carriage of material in all leads & lifts.:
Finishing walls with Acrylic Smooth exterior paint of required shade Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface including carriage of material in all leads & lifts.: Approved Make of Asian/ ICI Dulex.
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including carriage of material in all leads & lifts.: Asian/ Nerolac/Berger/ ICI.
Nitish Bramta
Inder Singh Thakur
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .