PROVISION OF UNIT TECHNICAL LIBRARY AND PROVN OF FALSE CEILING AT BAR ROOM OF OFFICER MESS AND MODULAR KITCHEN FOR OFFICERS MESS AT CGRA TUTICORIN UNDER GE (I) (CG) CHENNAI

Amount

B/R ITEMS

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil.

Earth work, excavation in all kind of soils by mechanical means (Hydraulic excavator) in foundation trenches or drains, for laying of under ground cables, pipes/pipe lines, etc. (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, not exceeding 1.50m in depth (lift upto 1.5 m) including getting out the excavated soil and disposal of excavated soil as directed, within a lead of 50 m. etc., complete all as specified and as directed.

Earth work, excavation in all kind of soils by mechanical means (Hydraulic excavator) in foundation trenches or drains, for laying of under ground cables, pipes/pipe lines, etc. (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, exceeding 1.5m and not exceeding 3.0m in depth including getting out the excavated soil and disposal of excavated soil as directed, within a lead of 50 m. etc., complete all as specified and as directed.

Excavating over areas (exceeding 30 cm in depth, 1.50m in width as well as 10Sqm on plan) not exceeding 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed.

Material and labour for Plain Cement Concrete (PCC) 1:4:8, Type D2 using 40mm graded stone aggregate as in foundation, fillings and mass concrete complete all as specified and as directed..

Material and labour for Reinforced Cement Concrete, RCC M-30 Design mix, using 20mm and below graded stone aggregate as in beams, cantilevers, bressumers, lintels and coping over 1.5m span and similar works complete all as specified and as directed.

Material and labour for Reinforced Cement Concrete, RCC M-30 Design mix, using 20mm and below graded stone aggregate as in chajjas.

Material and labour for Reinforced Cement Concrete, RCC M-30 Design mix, using 20mm and below graded stone aggregate as in in foundation incl rafts, footings, foundation, plinth beam underreamed piles and mass concrete complete all as specified and as directed.

Material and labour for Reinforced Cement Concrete, RCC M-30 Design mix, using 20mm and below graded stone aggregate as in Columns, pillars, piers, posts and struts etc., complete all as specified and directed.

M&L RCC M-30 (Design mix) for slab supported on walls, beam and columns in floor, roofs, slabs and in shelves and the like etc., complete all as specified and directed.

Formwork (square, reactangular or polygonal) to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished flat surfaces of concrete complete all as specified and as directed.

Form work to sides of pillars, posts, struts, piers, columns and stanchions for fair finished flat surfaces of concrete complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, coping, shelves including supports, overhangs, etc. also splays between floors and beams complete of flat fair finished surfaces of concrete complete all as specified.

Form work to chajjas and similar work for fair finish surfaces all as specified.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (horizontal or sloping) rough finished surfaces of concrete all as specified..

Material and labour for High Strength Corrosion Resistant Deformed Steel Bars produced by Thermo Mechanical Treatment process [TMT] steel bars of grade Fe-500D in reinforcement, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed.

Material and labour for High Strength Corrosion Resistant Deformed Steel Bars produced by Thermo Mechanical Treatment process [TMT] steel bars of grade Fe-500D in reinforcement, 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for High Strength Corrosion Resistant Deformed Steel Bars produced by Thermo Mechanical Treatment process [TMT] steel bars of grade Fe-500D in reinforcement, 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed.

Material and labour for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 all as specified and as directed.

Material and Labour for walling of random rubble uncoursed, well bonded, bedded,solidly hearted built in CM 1:6 complete all as specified and as directed.

Extra over to stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exc. 20mm and dressing face beds and joints to random rubble walling uncoursed complete all as specified and as directed.

Material and labour for plain cement concrete 1:2:4, type B1 using 20 mm graded stone aggregate in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating complete all as specified and as directed.

Material Labour for keyed pointing in Cement mortar 1:3 to random rubble stone walling uncoursed or brought upto courses in CM (1:3) including raking of joint complete all as specified and as directed.

Material and labour for Plain Cement Concrete 1:5:10, type E2, using 40mm graded stone aggregate as in foundation of external wall of PB, fillings and mass concrete complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type soil complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 Metre and depositing where directed at a level not exceeding 1.50 Metre above the starting point complete all as specified and as directed.

Material and Labour for 20mm thick damp proof course to horizontal or vertical surfaces including necessary formwork in cement mortar 1:2 complete all as specified and as directed.

Material and Labour for Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 Cum per Sqm complete all as specified and as directed.

Material and labour for moorum/ Red Bajri filling in floor or paving, laid in layers not exceeding 15cm thick, spread levelled and rammed including watering as in complete all as specified and as directed.

Material and Labour for Plain cement concrete 1:4:8, 75mm thick, type D2, using 40mm graded stone aggregate as in sub-base/floor complete all as specified and as directed

Material and Labour for 25mm thick PCC,1:2:4, type B-1, using 20mm graded aggregate as in floor finished even and rough to receive top layer complete all as specified and as directed.

Material and labour for Double charged Virified ceramic tiles of grade B-I(a), 9-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, laid in floors of pattern as approved over and including 15mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.

Material and labour for Double charged Virified ceramic tiles of grade B-I(a), 9-10 mm thick (square/ rectangular) polished, of size matching to floor tile as approved, fixed in vertical surfaces such as in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over a backing coat in Cement Mortar 1:4, 10mm thick on fair faces of brick or concrete surfaces all as specified and as directed.

Material and labour for coloured Non Skid ceramic tiles, matt finish of grade B-II(a), 7 to 8 mm thick (square/ rectangular), light coloured group, area of each tile exceeding 0.06Sqm but not exceeding 0.11 sqm, laid in floors of pattern as approved over and including 15mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.

Material and labour for glazed coloured ceramic tiles of grade B-III, 7mm thick of size 350mm x 250mm / 450mm x 350mm or of size matching to floor tile as approved by GE, fixed in vertical surfaces such as in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over and including a backing coat in Cement Mortar 1:4, 10mm thick all as specified and as directed.

Material and Labour for 16-18mm thick coloured marble (Green marble) slab, (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms,verandah including nosing and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble including cutting, polishing (mirror type) over a screed bed/backing coat of 15mm thick cement mortar 1:4 complete all as specified and as directed.

Material and labour for Granite 20mm thick (black galaxy or z black) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms,verandah including nosing and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over a screed bed of 15mm thick cement mortar 1:4 complete all as specified and as directed.

Rounding to edges of stone slabs full bull nose edge,such as in steps, cooking platform, and other similar situations

Material and labour for Rendering 10 mm thick on fair faces of brick wall or concrete surfaces in Cement mortar 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering in Cement Mortar 15mm thick in two coats, i.e, in Cement Mortar 1:4, 5mm thick mixed with water proofing compound as per manufacturers' instructions over in Cement Mortar 1:6, 10mm thick on fair faces of brick/concrete surfaces, finished even and fair externally all as specified and as directed. Note: WPC will be measured and paid separately.

Supply only liquid integral water proofing compound suitable for mix with mortar of external plastering/concrete in coastal area of approved quality.

Material and labour for rendering 5mm thick in cement mortar 1:3 on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and as directed.

Material and Labour for preparation of new plastered surfaces of walls and applying two coats of acrylic distemper oil emulsion over a coat of wall care putty of thickness 1.5mm and alkali resistant primer complete all as specified and as directed.

Material and Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces completed all as specified and directed.

Material and Labour for preparation of new plaster surface of ceiling and applying three coats of white wash complete all as specified and directed

Supply and Fix solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitred out at two corners and joined by inserting two Nos of 150mm long brackets of 15mmx15mm MS square tube inside the drilling 100mm long MS screws using PVC fastener complete all as specified and as directed.

Supply and Fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed.

Supply and Fix 100 mm Butt hinges, extruded aluminium alloy, type B-21 with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed.

Supply and Fix Aluminium anodised, ISI marked barrel tower bolts 200mm of extruded section and fixed complete all as specified and directed.

Supply and Fix extruded aluminium alloy handles fabricated types, anodised, each 150mm long complete all as specified and directed.

Supply and Fix 300 mm long Aluminum alloy anodised, sliding door bolt with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy all complete as specified and as directed.

Material and Labour for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less design finish for asthetic ceiling complete all as specified and as directed. Note: Frame work / snap grid for false ceiling shall be measured and paid separately

Material and Labour for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M & L for 3mm thick wall care putty on false ceiling complete all as specified and as directed.

M & L for preparation of new false ceiling surface and applying two coats of oil bound distemper over a coat of Priming plastered and other surfaces with alkali resistant priming paintcomplete all as specified

Supply and Fix Aluminium powder coated curtain rods of 25mm diameter with wall thickness not less than 1.5mm for windows, doors opening etc. including rings @ 10Nos per RM etc.,complete all as specified and as directed.

Supply and Fix fancy type aluminium powder coated knobs/brackets for fixing curtain rod of 25mm diameter complete all as specified .

Supply and Fix powder coated aluminium sections for frame of doors, windows, partitions etc., having thickness of powder coating not less than 50 micron and colour as approved by GE/ Engineer - in Charge with one or more rebates including necessary joining cleats etc., complete all as specified and directed.

Supply and Fix powder coated aluminium window and ventilator shutters, having thickness of powder coating not less than 50 micron and colour as approved by GE, sliding type without sash bar using aluminium section weighing not less than 0.55 Kg/Rm including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, rollers & interlocking handles for sliding shutters etc., complete all as specified and as directed. Note : Powder coated Aluminium frame for Doors, Partitions, two track/three track sliding windows, Glass panes and wire mesh shall be measured and paid separately.

M&L for Framed work such as grills for windows fixed in brick or concrete surfaces etc ,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including welding, rivetting,fixing grill to brick/concrete wall complete all as specified and as directed.

Supply and Fix Powder coated aluminium grill DG 916 of 10mm dia, square/rectangular/circular or similar type of shape, aperture not exc. 7cm in length or width having thickness of powder coating not less than 50 micron and colour, design/pattern as approved, with approved standard section and fixed to the existing window frame with 'H' or 'F' channel of size 38mm x 12mm x 1.30mm (Scc No.8778) with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles etc., complete all as specified and as directed.

Supply and Fix stainless steel wire mesh with 0.36 mm nominal dia wire and average width of aperture not exc. 1.40 mm dia and fixed with stainless steel staples to aluminium shutters etc., complete all as specified and as directed.

Supply and Fix Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in floor complete all as speciifed and directed.

Supply and Fix 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane complete all as specified and as directed.

Supply and fix 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.

Material and labour for 18/19mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination with lipping fixed with screws to timber frame work complete all as specified and directed.

Supply and fix Brass Mortice lock, 4 levers, vertical type of size 100 mm with stainless steel handle set suitable for right and left, inside or outside opening aluminium / wooden doors complete all as specified and as directed.

Material and labour for 25mm average thick PCC 1:2:4, type B0, using 12.5mm graded stone aggregate mixed with water proofing compound as per manufacturer's instructions as in roof padding and finished the surfaces fair and even complete all as specified and as directed. Note: Liquid WPC will be measured and paid separately.

Material and Labour 10 mm thick screed bed or bedding layer in cement mortar 1:4, mixed with liquid water proofing compound as per manufacturer instructions and finished the surface fair and even including preparation of rendered surfaces of roof and brushing neat cement slurry with 3.0 kg of cement per square metre complete all as specified and as directed. Note: WPC shall be measured and paid separately

Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as specified and as directed..

Supply and fix Vitreous china wash down water closet pan, EWC, pedestal pattern, colour white, closed pattern with flat bottom including fixing bolts, P/S trap and including connections to drain and flush pipe (or outgoing pipe) etc., complete all as specified and as directed.

Supply and fix plastic water closet (EWC) seat cover, white colour, closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device of same make of EWC, fixed complete all as specified and as directed.

Supply and fix PVC low level flushing cistern, white, 10 litre capacity, syphonic action type, white body with inlet, ball valve, float, handle, bracket, 32mm bore steel chromium plated flush pipe etc and connecting to WC and water pipe lines etc., complete all as specified and as directed.

Supply and Fix White Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws fixed complete all as specified and directed.

Supply and Fix PVC connection 15 mm dia, 450 mm long with 2 Nos. of brass CP check nuts with washers etc., complete all as specified and as directed.

Supply and fix Vitreous china counter Wash Hand Basin, white, fancy type, flat back of size 550 x 400mm or next higher size including cantilever brackets (CI/PVC), porcelain stopper, cutting for and pinning ends of brackets including waste fittings of brass chromium plated 32 mm (excluding waste pipe, taps chain and plug) complete all as specified and as directed.

S&F Brass chromium plated bottle traps 32mm for wash basins with inlet and outlet screwed for pipe of connections including necessary packing union and cap and fixedcomplete all as specified and as directed.

S & F PVC (SWR) gully trap 125 / 110 mm including setting and jointing with solvent cement and removing old trap and making good complete all as specified and as directed.

Supply and fix 15mm bore pillar tap fancy type, cast copper alloy with capstan heads, chromium plated screwed down, high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed.

Supply and fix Brass chromium plated shower rose of size 125mm with or without swivel joints fixing to 15mm dia steel pipe or union complete all as specified and as directed.

Supply and Fix 15mm bore Bib tap of cast copper alloy, fancy type, Chromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and Fix 15mm stop cock/angle cock, cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with fancy shank and cup complete all as specified and as directed.

Supply and Fix Soap dish chromium plated of size not less than 100mm, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

Supply and fix Towel Ring of Chromium plated 300mm length/dia fixed with and including Chromium plated brass screws complete all as specified and as directed.

Supply and fix Brass Chromium Plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

Supply and Fix Health faucet (ABS Body) chromium plated suitable for 15 mm dia pipe with 1.5 metre long flexible tube 8mm dia (PVC chromium plated) and ABS wall hook including making connections and fixed in position complete in all respect as specified and as directed.

Supply and Fix 25mm dia three layer PP-R polypropyline random copolymer concealed pipes SDR 7.4 & SDR 11 UV stablised and antimicroblal fusion welded having thermal stablility of hot and cold water supply incl all PP-R plain and brass threaded polypopylene random fittings fixed complete to wall or in ceiling or in floors etc all as specified and as directed.

Supply and Fix 20mm dia three layer PP-R polypropyline random copolymer concealed pipes SDR 7.4 & SDR 11 UV stablised and antimicroblal fusion welded having thermal stablility of hot and cold water supply incl all PP-R plain and brass threaded polypopylene random fittings fixed complete to wall or in ceiling or in floors etc all as specified and as directed.

Supply and Fix Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks,1000 litres capacity, three layered (Cylindrical vertical with closed top) screwed lid type conforming to IS 12701-1996 with manhole lid and suitable locking arrangement, making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) complete all as specified and as directed.

Supply and Fix Gun metal globe or gate valve of size 20mm bore confirming to IS 778-1984 with brass spindle and iron wheel head at the top screwed both ends for GI pipe including all fittings / fixtures like nipple, union etc. complete all as specified and as directed

Supply and fix Ball valve PTMT with epoxy coated aluminimum rod for 20mm bore pipe, high pressure with polyethylene high density float and complete, weight not less than 210 gms/each, screwed for iron pipe or brass ferrule complete all as specified and as directed.

Supply and fix UPVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors/wall including necessary fittings such as bend. Elbow,tee, Y etc all with access door complete all as specified.

Supply and fix UPVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors/wall including necessary fittings such as bend. Elbow,tee, Y etc all with access door complete all as specified.

Material and Labour for PVC (SWR) floor trap 75mm/110mm dia, plain with grating including jointing with solvent cement including necessary fittings such as bend. Elbow,tee, Y etc all with access door complete all as specified.

S & F UPVC (SWR) vent cowl 110mm dia complete all as specified

Material and Labour for Cutting in to existing manholes 100 mm dia for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching complete all as specified.

Material and Labour for treating the top surface of filled earth @ 5 litre of emulsion per sqr metre of surface complete all as specified and as directed.

Material and Labour for treating the soil under plinth protection @ 5 litre of emulsion per sqr metre of surface area complete all as specified and as directed.

Material and labour for Hardcore of gauge not exc. 63mm using Broken stone or boulders, deposited spread and levelled in layers not exceeding 15cm thick, watered and well rammed to a true surface all as specified and as directed.

Material and labour for PCC 1:3:6, type C2, 75mm thick (using 40mm graded stone aggregate) laid to a slope of 1:20 as in plinth protection / foot path pavings etc., finished the surfaces fair and even with out using extra cement including making grooves at junction of wall and in plinth protection at 2.50m c/c complete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles portions ordered to be dismantled complete all as specified and as directed.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition and breaking 200 mm dia., drain pipes (Salt glazed ware, AC or reinforced concrete set in cement mortar, separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M complete as directed by the Engineer in Charge. Note: Excavation earthwotk, Returning filling in and removal of soil if required shall be measured and paid separately.

Removing excavated material (soil) to a distance exceeding 250 m but not exc. 500 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. Note: Removal of soil/excavated material beyond the lead considered in excavation only shall be measured against this item.

Material and labour for Plain Cement Concrete (PCC) 1:3:6, type C2 using 40mm graded stone aggregate as in foundation, fillings and mass concrete complete all as specified and as directed.

Provide precast cement concrete of type B1 1:2:4 in with plain fair faces, but in landings, cover slabs (for man holes etc) chullah hoods, chajjas, water trough, managers, shelves & similar articles with plain faces including chamfers, weathering, throating etc. & setting in mortar complete with joints to match.

Material and labour for Reinforced Cement Concrete, RCC M-30 Design mix, using 20mm and below graded stone aggregate as in wall (200mm thick for sewerage manhole) etc., complete all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar 1:4 on brick masonary / concrete surfaces, finished even and smooth without using extra cement all as specified.

Material and labour for 15mm thick rendering in cement mortar 1:3 on brick masonary / concrete surfaces, finishedeven and smooth without using extra cement all as specified with using WPC.

Supply and lay Double wall corrugated High-density polyethylene (SN 8) pipe of size 250mm dia (295mm OD) conforming to IS 16098 (part 2):2013, laid in trenches/floors over concrete bed with and including necessary fittings such as bends, sockets and other connected accessories etc., complete all as specified and directed

Material and labour Cutting into existing manhole for connecting new drains, making good to pipe and rendring, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finishe, and reinforming benching as required for 150 mm dia pipe complete all as specified.

Material and labour Cutting into existing manhole for connecting new drains, making good to pipe and rendring, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finishe, and reinforming benching as required for 200 mm dia pipe complete all as specified.

Removing demolised building materials etc. (Other than soil obtained from excavation and items catered in schedule of credit) to a distance of not exceeding10KM or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and as directed. Note: 'Load' shall be one metric tonne or the standard load definition as per preamble on Sl.Page No.494 of MES SSR Part II 2020.

Site clearece and Surface dressing not exc 15 cm deep in soft/loose soil including cleaning of bushes and shrubs. Note :Before the work is started, the area shall be cleared of shrubs, vegetation, grass, bush , weed, trees and saplings not exceeding 30 cm in girth, measured at a height of one metre above ground level. Useful material shall be stacked and rubbish/ useless materials disposed off upto outside the periphery of the area. Roots of trees and saplings shall be removed as described under felling of trees and the hollows filled up with earth, levelled and rammed as per SSR Part 1 Clause 3.6

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Soft/loose soil complete all as specified and as directed.

Material and Labour for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Material and labour for laying of machine pressed precast concrete interlocking paver block, 80 mm thickness, M-40 grade with grey cement and no pigments of any shape and size confirming to IS 15658-2006 complete all as specified and as directed.

Material and labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

M & L for 50 mm thick Plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate complete all as specified and as directed.

M & L for preparaion new surfaces and applying two coats of synthetic enamel paint over a coat of priming paints/plaster coat on kerb stone complete all as secified and as directed.

M&L for Plain Cement concrete 1:3:6 , type C1, using 20mm graded stone aggregate as in coping complete all as specified and as directed.

M & L for Plywood water proof grade (grade BWP) 12mm thick , fixed with screws timber frame work in kitchen baskets/frames complete all as specified and as directed.

M & L for Decorative laminate 0.90mm thick of surface finish, colour and pattern as approved by Engineer-in- charge, fixed with approved adhesive as per manufacturer's instructions on water proof (BWP grade) plywoods complete all as specified and as directed.

Supply & fix Cutlary Drawer/basket of size 530 x 505 x 100mm made of stainless steel of Grade 304 complete all as specified and as directed. Make : SLEEK or Equivalent in HETTICH/ HAFALE/ KUTCHINA

Supply & fix Cup and Saucer Drawer/basket of size 530 x 505 x 100mm made of stainless steel of Grade 304 complete all as specified and as directed. Make : SLEEK or Equivalent in HETTICH/ HAFALE/ KUTCHINA

Supply & fix Plain Drawer/basket of size 530 x 505 x 150mm made of stainless steel of Grade 304 complete all as specified and as directed. Make : SLEEK or Equivalent in HETTICH/ HAFALE/ KUTCHINA

Supply & fix Plain Drawer/basket of size 530 x 505 x 200mm made of stainless steel of Grade 304 complete all as specified and as directed. Make : SLEEK or Equivalent in HETTICH/HAFALE / KUTCHINA

Supply & fix Thali/Plate Drawer/basket of size 530 x 505 x 200mm made of stainless steel of Grade 304 complete all as specified and as directed. Make : SLEEK or Equivalent in HETTICH/ HAFALE/ KUTCHINA

Supply & fix Partition Drawer/basket of size 530 x 505 x 150mm made of stainless steel of Grade 304 complete all as specified and as directed. Make : SLEEK or Equivalent in HETTICH/HAFALE / KUTCHINA

Supply and Fix Single pull out Drawer/basket of size 180 x 515 x 485mm made of stainless steel of Grade 304 complete all as specified and as directed. Make : SLEEK or Equivalent in HETTICH/HAFALE / KUTCHINA

Supply and Fix Glass and plate rack/Drawer/basket of size 855 x 255 x 100mm made of stainless steel of Grade 304 complete all as specified and as directed. Make : SLEEK or Equivalent in HETTICH/HAFALE /KUTCHINA

Supply and Fix Stainless Steel ELNORA PREMIUM LARDER UNIT of size 370 x 505 x 1875mm made of stainless steel of Grade 304 complete all as specified and as directed. Make : SLEEK or Equivalent in HETTICH/HAFALE / KUTCHINA

Supply and Fix telescopic channels/drawer slides 500mm long of Zinc coated mild steel for modular kitchen baskets with load carrying capacity of 45Kg complete all as specified and as directed. Make : SLEEK Model No:HICH1034 or Equivalent in HETTICH/HAFALE /KUTCHINA/GODREJ/KAFF/EBCO

Supply and fix Stainless steel soft close hinge with 35mm cup dia, full overlay, 110 degree opening suitable for Modular kitchen/cup board shutters up to 18mm thick complete all as specified and as directed. MAKE: SLEEK / HETTICH / HAFALE / KUTCHINA/ EBCO/ GODREJ / KAFF

S & F aluminium powder coated edge profiles/ G profile handles with suitable length(500mm to 1200mm) and pattern for modular kitchen cabinets/cup boards as approved by Engineer in charge complete all as specified and as directed. MAKE: SLEEK / HETTICH / HAFALE / KUTCHINA/ EBCO/ GODREJ / KAFF

Supply and Fix of Stainless steel body Chimney with 60cm width Noise level upto 60(dBA), electronic soft touch control with auto clean heat oil collector provision of LED lighting arrangements, including provision of wiring with suitable pvc casing, chimney pipe and Modular switch for chimney complete all as specified and as directed. Make : Blue Bel BellH from Sleek or Equivalent in Faber/Elica/Glen

E/M ITEMS

Supply and lay GI Pipe, 'Medium grade' galvanised of size 50mm with all fitting and fixed to walls and ceilings or laid in floors complete all as specified and directed.

Supply and lay GI Pipe, 'Medium grade' galvanised of size 32mm with all fitting and fixed to walls and ceilings or laid in floors complete all as specified and directed.

Supply and lay GI Pipe, 'Medium grade' galvanised of size 25mm with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply and Fix Gun metal globe or gate valve of size 25mm bore confirming to IS 778-1984 with brass spindle and iron wheel head at the top screwed both ends for GI pipe including all fittings / fixtures like nipple, union etc. complete all as specified and as directed

Supply and Fix Gun metal globe or gate valve of size 32mm bore confirming to IS 778-1984 with brass spindle and iron wheel head at the top screwed both ends for GI pipe including all fittings / fixtures like nipple, union etc. complete all as specified and as directed

Supply and Fix Gun metal globe or gate valve of size 50mm bore confirming to IS 778-1984 with brass spindle and iron wheel head at the top screwed both ends for GI pipe including all fittings / fixtures like nipple, union etc. complete all as specified and as directed

Material and Labour for Construction of brick massonry valve pit chamber of inner dimension 100x100x100 cms suitable for sluice valves upto 100mm size, with PCC 1:4:8 type D-2 for foundation, brick work in cm 1:6 rendering 1:4, 15mm plastering, coping in PCC 1:2:4 type B-1, incl necessary earth work, including MS sheet cover of thickness 3.15mm on 50x50x6.0 mm angle iron framework including two coats of synthetic enamelled paint over a coat of red oxide primer with making provision of locking arrangement complete all as specified and directed.

Excavating in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying of under ground cables, pipes/pipe lines, etc. and the like not exc. 10 Sqm on plan and not exc 1.5m in depth and getting out in soft/lose soil complete all as specified and as directed.

Material & Labour for inserting the new GI Pipe 50mm dia to the existing pipe of any size with necessary reducer by cutting the existing pipe line, jointing and testing for leakage and ensure no leakage etc., complete all as specified and directed.

Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply and fix LED Post Top light fittings 27W, 4000K made up of aluminum die cast housing with acrylate reflector material and optical material along with stainless steel fixation material, IP65 protection complete all as specified and as directed. Note : The unit rate quoted shall be deemed to include the cost of material and labour for fixing the base plate of the post top light fittings on the cement concrete surface.

Supply and lay in trenches/drawn through pipes or in road crossings / paths/drains/ducts/ floors/along poles/ equipments etc., of LT cable under ground, XLPE insulated, screened, PVC bedded, galvanised strip or wire armoured, heavy duty electric cable of size 4 core x 16 Sqmm with stranded aluminium conductor, 1100 volts grade confirming to IS-7098 (Part-I) 1988 including connecting up using suitable size aluminium lugs testing and commissioning complete all as specified and directed :- Note : Excavation earth work, sand cushioning and brick protection shall be measured and paid separately.

Material and labour for point wiring complete with two runs of 1.5 Sqmm (for Phase and Neutral) PVC insulated unsheathed multistranded, copper conductor FRLSH cable of 1100V grade conforming to IS - 694 drawn through and including new PVC casing and caping of suitable size with accessories fixed on surfaces of wall / floor and fixed on ceiling/roof etc, including provision of fabricated branded modular metal flush box of suitable module with for housing the switches, sockets, fan regulator etc complete and provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly etc., for one light point controlled by one one modular switches etc, complete all as specified and directed. Note : The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth.

Supply and laying of 50mm bore High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches complete all as specified and as directed.

.Supply and fix MCB Single Pole (MCB SP) of rating 10Amps, 240 volts of rupturing capacity 10kA, C curve type complete all as specified and as directed.

Supply and fix GI tube light grade 40mm dia for fixing of street lights including clamps, nut bolts etc., bend to shape complete all as specified and as directed.

Supply and fix SMC/FRP/Thermoplastic Junction box of size 250 x 200 x 100mm, 3 phase, 4 terminal, IP55, long connector along with MCB fixing channel complete all as specified and as directed. Note : MCB shall be measured and paid separately

Material and labour for preparation of new steel surfaces and applying two coat of Synthetic enamel painting over one coat of red oxide or Zinc chrome primer etc., complete all as specified and as directed.

Supply, fix, connecting and testing MCCB, TPN, 63 Amps, 415Volts with breaking capacity 16kA, with Fixed Thermal setting, conforms to IEC 60947 - II, suitable for isolation, fixed short circuit setting, fixed overload setting complete all as specified and as directed.

Supply, fix, connecting and testing factory made, distribution board, (MCB DB) TPN, 6way, having degree of protection IP 43 with metal double door, 240 Volts, flush type made out of CRCA sheet metal, duly powder coated and conforming to IS 8623 with 200 Amps rated copper bus bar with neutral link etc., complete all as specified and as directed. Note: MCBs will be measured and paid separately.

Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth strip 25 x 4mm means of bolts, nuts washers, check nuts as shown in electrical plate No. 3 connected to earthing test points including excavation and earth work PCC 1:2:4 type B-1(using 20mm graded aggregate) in PCC chamber RCC cover 50mm thick in RCC 1:2:4 type B-1 ( 20mm graded aggregate) with 8 mm TMT bars at 15 cm c/c in both ways with hooks, funnels with 20 mm dia GI watering pipe medium grade, wire mesh and funnel 15 mm dia GI protection pipe light grade and testing on completion including taking out old u/s earthing accessories complete all as specified and as directed.

Supply and lay in trenches/drawn through pipes or in road crossings / paths/drains/ducts/ floors/along poles/ equipments etc., of LT cable under ground, XLPE insulated, screened, PVC bedded, galvanised strip or wire armoured, heavy duty electric cable of size 4 core x 35 Sqmm with stranded aluminium conductor, 1100 volts grade confirming to IS-7098 (Part-I) 1988 including connecting up using suitable size aluminium lugs testing and commissioning complete all as specified and directed :- Note : Excavation earth work, sand cushioning and brick protection shall be measured and paid separately.

All as per Sl. item No. 165 above but for one 3 pin 5/6 Amps socket outlet on independent board complete all as specified and as directed.

All as per item Sl No 165 above but for one 5 Amps socket on same board with other switches regulator etc complete all as specified and as directed.

Supply, fix, connecting and testing factory made, MCB distribution board, (MCB DB), single door, SPN, 4 way, 240 Volts, having degree of protection IP 42, flush type made out of CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 8623 with 200 Amps rated copper bus bar with neutral link, complete concealed and fixed flush to wall and making good the disturbed surfaces complete all as specified and as directed. Note: MCBs will be measured and paid separately.

Supply, fix, connecting and testing MCB Single Pole and Neutral (MCB SPN), 40-63Amps, 240 volts of rupturing capacity 10kA, C curve type complete all as specified and as directed.

Supply, fix, connecting and testing MCB Single Pole (MCB SP), 5 to 32Amps, 240 volts of rupturing capacity 10kA, C curve type including taking down old unserceable MCB complete all as specified and as directed.

Supply and fixing LED security light fitting 20 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply and fix 4 feet 1 x 20 Watts LED light fitting, Basic all purpose surface and wall mounted LED batten with powdered coated aluminum housing & integrated electronic driver all as per Cat No. ENDURALINEAR NEOBS20WLED865SPCWH of Havells or techno-commercially equivalent of other specified makes fixed on surfaces of wall or ceiling with necessary hanging/fixing arrangements and connecting of flexible wire twin core from ceiling rose to fitting drawn through and including flexible conduit etc., complete all as specified and directed. Note: The new fittings shall bear the CA No. and Year written by Black synthetic enamel paint using stencils or by permanent marker pen and the unit quoted shall be deemed to include the cost of writing these details.

Supply and fix 2 feet 1 x 10 Watts LED light fitting, Basic all purpose surface and wall mounted LED batten with powdered coated aluminum housing & integrated electronic driver all as per Cat No. ENDURALINEAR NEOBS10WLED865SPCWH of Havells or techno-commercially equivalent of other specified makes fixed on surfaces of wall or ceiling with necessary hanging/fixing arrangements and connecting of flexible wire twin core from ceiling rose to fitting drawn through and including flexible conduit etc., complete all as specified and directed. Note: The new fittings shall bear the CA No. and Year written by Black synthetic enamel paint using stencils or by permanent marker pen and the unit quoted shall be deemed to include the cost of writing these details.

Supply and fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) fixed to roof/ceiling with suitable clamp including provisioning of flexible copper cord of size 23/0.0076 of required length from ceiling rose or connector to ceiling fan etc., complete all as specified and as directed. complete all as specified and as directed.

Supply, fix, test and commissioning of Exhaust fan, steel body, AC single Phase. 230V of size 300mm sweep with blades, with protection mesh and without shutter to avoid birds entering louvers including provision of flexible copper cord of size 23/0.0076 of required length from ceiling rose or connector to exhaust fan in flexible hose etc., complete all as specified and as directed.

Supply and Fix Modular Switch, single pole, 6 Amps One Way, AC 230V, 50HZ supply complete all as specified and as drected.

Supply and Fix Modular Switch 16 Amps, one way, flush type complete all as specified and as directed.

Supply and fix Ceiling rose, surface mount type, PVC/ Polycarbonate, with face bakelite 65 x 50mm three terminals, 240 Volt, AC Single phasecomplete all as specified and as directed.

Supply and Fix Modular type socket 6A AC 230V, 50HZ complete all as specified and as directed.

Supply and Fix Modular type socket combine 6A/16A multi purpose 2/3 pin 2module AC 230CV, 50Hz complete all as specified and as directed.

Supply and Fix Modular type electronic ceiling fan regulator, 2 module, 240 V complete all as specified and as directed

Supply and Fix modular white cover plate with frame 2 module complete all as specified and as drected.

Supply and Fix modular white cover plate with frame 3 module complete all as specified and as drected.

Supply and Fix modular white cover plate with frame 6 module complete all as specified and as drected.

Supply and Fix modular white cover plate with frame 8 module complete all as specified and as drected

Material and Labour for painting of ceiling fan/ DB panel of any size/ make/ model complete in site with synthetic enamel paint by brush including filling cavities with fillers, one coat of after cleaning dust, removing the grease, carbon dust over the fans and rewriting the fan/MES number with black enamel paint etc complete all as specified and as directed.

Material and Labour for hanging the ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan with changing the down rod/ drop rod of required length as specified by Engineer-in-Charge all as specified and as directed.

Supply and Fix LED 18 watts recess mounting type square (1' x 1') Light fittings suitable for fixing in false ceiling and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and as directed. Note : The rate included with the cost for cutting the false ceiling to match the size of light and making good the surface.

Banyan Engineers and Contractors (BID ID -3421000)