Construction of Soft Roof over Main Block Renovation Main and Annex Block of Material Engineering Department at IISc

Amount

Providing 2 legged scaffolding for stone masonry work using 10-15 cms. dia best quality casurina poles of 4m over all length (3m +0.5m projection + 0.5m In to the ground), the distance between two rows being 1.25m and spacing of posts being 2m in both rows with 2 horizontal posts with 0.5 mm overlap on either side and braces at 2 m c to c including longitudinal and transveres middle braces to step up and providing platform with casurina poles, forms tied up using coir rope, scaffolding with all lead and lift complete as per specifications.Renovation:-

Providing 2 legged scaffolding for stone masonry work using 10-15 cms. dia best quality casurina poles of 4m over all length (3m +0.5m projection + 0.5m In to the ground), the distance between two rows being 1.25m and spacing of posts being 2m in both rows with 2 horizontal posts with 0.5 mm overlap on either side and braces at 2 m c to c including longitudinal and transveres middle braces to step up and providing platform with casurina poles, forms tied up using coir rope, scaffolding with all lead and lift complete as per specifications. Lift for Second Floor soft construction over main block:-

Dismantling plastering and remvoing the debris with a lead upto 200m. Renovation:-

Providing cement mortar of mix 1:3 (1 cement : 3 sand) including cost of all materials, labour charges, HOM of machinery complete as per specifications. Renovation for double layer rough Plastering work.

Providing and fixing plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per SQM width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. (length of mesh only be measured for payment).Renovation:-

Providing and fixing plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per SQM width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment ).Second Floor soft construction over main block:-

Providing and fixing welded square mesh 25 X 25 mm size of 14 gauge and fixed to the ceiling and fixing the mesh with 20 X 6mm flat at a distance of 1mtr c/c all along the ceiling at mesh joints and work to be executed as per specification and the directions of Engineer-in-charge.Renovation:-

Providing lime rendering for plastering to ceiling smooth, including cost of materials, labour, curing complete as per specifications.Renovation:-

Providing 20mm thick cement plaster on walls in single coat with cement mortar to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. cement mortar 1:4 for walls.Renovation:-

Providing 20mm thick cement plaster on walls in single coat with cement mortar to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. cement mortar 1:4 for walls.Second Floor soft construction over main block (External walls):-

Providing 20mm thick cement plaster on walls in single coat with cement mortar to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. cement mortar 1:4 for walls. Second Floor soft construction over main block (Internal walls):-

Providing 20mm thick cement plaster on walls in single coat with cement mortar to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. cement mortar 1:4 for walls. Lift for Second Floor soft construction over main block (Ground Floor):-

Providing 20mm thick cement plaster on walls in single coat with cement mortar to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. cement mortar 1:4 for walls. Lift for Second Floor soft construction over main block (First Floor):-

Providing 20mm thick cement plaster on walls in single coat with cement mortar to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. cement mortar 1:4 for walls. Lift for Second Floor soft construction over main block (Second Floor):-

Providing 20mm thick cement plaster on walls in single coat with cement mortar to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. cement mortar 1:4 for walls. Lift for Second Floor soft construction over main block (Terrace):-

Providing lime rendering for plastering to wall smooth, including cost of materials, labour, curing complete as per specifications. Renovation:-

Providing 20mm thick cement plaster on ceiling in single coat with cement mortar, to stone masonry & concrete surface including rounding off corners wherever required smooth rendering, including providing and removing scaffolding, cost of materials, labour, curing etc. complete as per specification. 15.18 cement mortar 1:6 for ceiling. Renovation:-

Providing 20mm thick cement plaster on ceiling in single coat with cement mortar, to stone masonry & concrete surface including rounding off corners wherever required smooth rendering, including providing and removing scaffolding, cost of materials, labour, curing etc. complete as per specification. 15.18 cement mortar 1:6 for ceiling. Lift for Second Floor soft construction over main block:-

Cutting out cracks of roof terrace to V section cleaning out, wetting, grouting with cement and sand slurry 1:3 (1 cement, 3 sand) including cost of materials, labour, complete as per specifications. Renovation:-

Cutting out cracks of roof terrace to V section cleaning out, wetting, grouting with cement and sand slurry 1:3 (1 cement, 3 sand) including cost of materials, labour, complete as per specifications. Annex block:-

For roof Slab & Terraces Providing & applying water proofing to roof slab, terraces, landscape area, podium etc., using modified polyurethane cures (conforming to ASTM C836-84) to give a tough elastomeric waterproof membrane on the surface. The surface shall be cleaned free from dust and other particle before usage. Standards & Methodology : This compound has a medium viscosity grade with 620% of elongation and shall be done either by roller application/brush application/ spray. This will be applied for a thickness of 1.3mm first layer 0.5mm & 2nd layer 0.8mm. After applying the 2nd layer sand sprinkle shall be done to provide mechanical key. Renovation:-

For roof Slab & Terraces Providing & applying water proofing to roof slab, terraces, landscape area, podium etc., using modified polyurethane cures (conforming to ASTM C836-84) to give a tough elastomeric waterproof membrane on the surface. The surface shall be cleaned free from dust and other particle before usage. Standards & Methodology : This compound has a medium viscosity grade with 620% of elongation and shall be done either by roller application/brush application/ spray. This will be applied for a thickness of 1.3mm first layer 0.5mm & 2nd layer 0.8mm. After applying the 2nd layer sand sprinkle shall be done to provide mechanical key. Annex block:-

For roof Slab & Terraces Providing & applying water proofing to roof slab, terraces, landscape area, podium etc., using modified polyurethane cures (conforming to ASTM C836-84) to give a tough elastomeric waterproof membrane on the surface. The surface shall be cleaned free from dust and other particle before usage. Standards & Methodology : This compound has a medium viscosity grade with 620% of elongation and shall be done either by roller application/brush application/ spray. This will be applied for a thickness of 1.3mm first layer 0.5mm & 2nd layer 0.8mm. After applying the 2nd layer sand sprinkle shall be done to provide mechanical key. Lift for Second Floor soft construction over main block:-

Fabricating, supplying & erecting M.S. Angular Truss for all spans as per approved designs and drawing. The entire truss is anchored suitably by using 4 Nos. of M.S. anchor bolts at each support, with base plate and shoe plate. The work includes cutting, straightening, placing in position of M.S angle and welding wherever necessary, and applying one coat of red oxide primer coat to all the members including cost of all materials, labour charges, & hire charges of machineries for cutting, welding, grinding & erection equipments, etc., complete as per specification Renovation:-

Providing and fixing for flooring 20mm thick sadarhalli grey granite in CM 1:4 proportion, cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, groves in joints including cost of including cost of all materials, mortar, labour, curing etc., complete as per specification minimum width of 900mm (gang saw water cut) Renovation:-

Providing and fixing for flooring 20mm thick sadarhalli grey granite in CM 1:4 proportion, cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, groves in joints including cost of including cost of all materials, mortar, labour, curing etc., complete as per specification minimum width of 900mm (gang saw water cut) Second Floor soft construction over main block:-

Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per the specification. Renovation:-

Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per the specification. Second Floor soft construction over main block:-

Providing and applying painting in two coats with plastic emulsion paint of approved brand (including priming coat) on ceiling surface to give an even approved shade after throughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications. Renovation:-

Providing and applying painting in two coats with plastic emulsion paint of approved brand (including priming coat) on wall surface to give an even approved shade after throughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications.Renovation:-

Providing and applying painting in two coats with plastic emulsion paint of approved brand (including priming coat) on wall surface to give an even approved shade after throughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications. Second Floor soft construction over main block:-

Providing and applying painting two coats (excluding priming coat) on new wood surface and / or wood based surface with enamel paint to give an even shade, cleaning the surface of all dirt, dust and foreign matter, sand papering including cost of materials, labour, complete as per specifications.Renovation:-

Providing and finishing external walls in two coats over one coat of 100% acrylic silicon glazed primer with antifungal paint for top coat of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications. Renovation:-

Providing and finishing external walls in two coats over one coat of 100% acrylic silicon glazed primer with antifungal paint for top coat of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications. Second Floor soft construction over main block:-

Providing and finishing external walls in two coats over one coat of 100% acrylic silicon glazed primer with antifungal paint for top coat of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications. Lift for Second Floor soft construction over main block (Ground Floor):-

Providing and finishing external walls in two coats over one coat of 100% acrylic silicon glazed primer with antifungal paint for top coat of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications.Lift for Second Floor soft construction over main block (First Floor):-

Providing and finishing external walls in two coats over one coat of 100% acrylic silicon glazed primer with antifungal paint for top coat of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications.Lift for Second Floor soft construction over main block (Second Floor):-

Providing and finishing external walls in two coats over one coat of 100% acrylic silicon glazed primer with antifungal paint for top coat of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications. Lift for Second Floor soft construction over main block (Terrace):-

Providing and applying enamel metal paint one coat (excluding priming coat) on previously painted steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications. Renovation:-

Providing and applying enamel metal paint one coat (excluding priming coat) on previously painted steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications. Second Floor soft construction over main block:-

Providing and fixing on wall surface pvc 6 KGs / sq.cm rain down water pipes of approved make and brand with necessary specials like shoes, bends and offsets fixed with iron clamps, wall plugs, screws, including cost of materials, labour, curing complete as per specifications 6KGs / sq.cm rain down water pipes 110mm outer dia Renovation:-

Providing and fixing on wall surface pvc 6 KGs / sq.cm rain down water pipes of approved make and brand with necessary specials like shoes, bends and offsets fixed with iron clamps, wall plugs, screws, including cost of materials, labour, curing complete as per specifications 6KGs / sq.cm rain down water pipes 110mm outer dia Lift for Second Floor soft construction over main block:-

Providing melamine polishing of approved shade including removing and refixing of doors shutters, glass, beading and existing polishing, scraping with blade and rubbing with zero size sand paper and applying sealer coat by way of spraying with necessary compressor and applying patty after rubbing with steel wool including two coats of approved shade of melamine polish etc., complete. Renovation:-

Loading and unloading of stone boulder/stone aggregates/sand/debris/kankar/moorum.

Placing tipper/tractor at loading point, loading with front end loader, dumping, turning for return trip, excluding time for haulage, cost of haulage excluding loading and unloading surface road 25kms lead.

Dismantling the tile work in floor and roof laid in cement or surki mortar including stacking the materials with in 50 m lead of tiles thickness 10mm to 25mm. including cost of materials, labour, HOM complete as per specifications. Second Floor soft construction over main block:-

Dismantling weather proof course and removing and conveying the debris to a distance upto 200 m. with all lead and lift , loading and unloading, transportation charges and all other incidental charges etc., completeThe rate inclusive of all taxes lead , lift Transportation etc. complete and the work shall be carried out as per the instructions of Engineer in charge. Second Floor soft construction over main block:-

Providing and constructing non-load bearing wall with cement concrete solid blocks with compressive strength not less than 35 KG/SQM with cement mortar 1:4 ( Jamb, closer blocks) with blocks of size 40x15x20cms. ( lxbxh ) conforming to I.S : 2185/1965 in superstructure including cost of materials, labour charges, scaffolding, curing complete as per Specifications. The rate inclusive of all taxes lead , lift Transportation etc. complete and the work shall be carried out as per the instructions of Engineer in charge. Second Floor soft construction over main block:-

Providing and constructing non-load bearing wall with cement concrete solid blocks with compressive strength not less than 35 KG/SQM with cement mortar 1:4 ( Jamb, closer blocks) with blocks of size 40x20x20cms. ( lxbxh ) conforming to I.S : 2185/1965 in superstructure including cost of materials, labour charges, scaffolding, curing complete as per Specifications. The rate inclusive of all taxes lead , lift Transportation etc. complete and the work shall be carried out as per the instructions of Engineer in charge. Second Floor soft construction over main block:-

Providing and constructing non-load bearing wall with cement concrete solid blocks with compressive strength not less than 35 KG/SQM with cement mortar 1:4 ( Jamb, closer blocks) with blocks of size 40x20x20cms. ( lxbxh ) conforming to I.S : 2185/1965 in superstructure including cost of materials, labour charges, scaffolding, curing complete as per Specifications. The rate inclusive of all taxes lead , lift Transportation etc. complete and the work shall be carried out as per the instructions of Engineer in charge. Lift for Second Floor soft construction over main block (Ground Floor):-

Providing and constructing non-load bearing wall with cement concrete solid blocks with compressive strength not less than 35 KG/SQM with cement mortar 1:4 ( Jamb, closer blocks) with blocks of size 40x20x20cms. ( lxbxh ) conforming to I.S : 2185/1965 in superstructure including cost of materials, labour charges, scaffolding, curing complete as per Specifications. The rate inclusive of all taxes lead , lift Transportation etc. complete and the work shall be carried out as per the instructions of Engineer in charge. Lift for Second Floor soft construction over main block (First Floor):-

Providing and constructing non-load bearing wall with cement concrete solid blocks with compressive strength not less than 35 KG/SQM with cement mortar 1:4 ( Jamb, closer blocks) with blocks of size 40x20x20cms. ( lxbxh ) conforming to I.S : 2185/1965 in superstructure including cost of materials, labour charges, scaffolding, curing complete as per Specifications. The rate inclusive of all taxes lead , lift Transportation etc. complete and the work shall be carried out as per the instructions of Engineer in charge. Lift for Second Floor soft construction over main block (Second Floor):-

Providing and constructing non-load bearing wall with cement concrete solid blocks with compressive strength not less than 35 KG/SQM with cement mortar 1:4 ( Jamb, closer blocks) with blocks of size 40x20x20cms. ( lxbxh ) conforming to I.S : 2185/1965 in superstructure including cost of materials, labour charges, scaffolding, curing complete as per Specifications. The rate inclusive of all taxes lead , lift Transportation etc. complete and the work shall be carried out as per the instructions of Engineer in charge.Lift for Second Floor soft construction over main block (Third Floor):-

Extra for providing throating or drip moulding to R.C.C. chajja with plastering (labour charges only) as per specification. Renovation:-

Extra for providing throating or drip moulding to R.C.C. chajja with plastering (labour charges only) as per specification. Second Floor soft construction over main block:-

Providing and laying in position Reinforced cement concrete of design mix M20 with opc cement @320KGs with 20mm and down size graded granite metal coarse aggregates @0.69 CUM and fine aggegates @ 0.46 CUM with super plastisiser @3lts confirming to IS 9103-1999 reaffirmed -2008, machine mixed, concrete laid in layers not exceeding 15 cms. thick,vibrated for R C C.beams ,coloums of all sizes in foundation plinth and super structurew ground floor level for roof slabs ,stair case,lintles, columns including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Second Floor soft construction over main block:-

Providing and fixing in position anodized aluminium windows and ventilators as per approved drawings with sliding shutters using three track window frame of size 92x31.75mm bottom section 1.3mm thick, weight 1.07KG/m; sides and top sections 1.3 mm, thick, weight 0.933 KG/m.shutter frame section comprising top and bottom section of size 40mmx18mm, wall thickness 1.25mm. weight 0.417 KG./m. shutter side outer 40mmx18mm. wall thickness 1.25mm. Second Floor soft construction over main block:-

Providing Sal wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves ( excluding cost of cement concrete and side clamps ), but including cost of materials, labour, HOM of machineries complete as per specifications. Second Floor soft construction over main block:-

Providing and fixing flush door shutter made out of solid core black board type, well seasoned chemically treated hard wood battens and internal frame with minimum 45 mm wide wooden frame all-round door shutters covered with cross bonded sheets (core veneer) hot pressed and fastened on both sides of the door using liquid phenol formaldehyde resin as per IS specification 2202 (Part-1) 1991. From manufacturer (Factory) complete as per specification. - do - 35 mm thick one side teak and one side commercial. Second Floor soft construction over main block:-

Providing and laying flooring using 60 X 60 cms of approved make, shade and size for flooring laid on bed of 12mm thick cement mortar 1:3 mix flush pointing with white cement using colour pigment including cost of all materials, labour, curing complete as per specifications The rate inclusive of all taxes lead , lift Transportation etc. complete and the work shall be carried out as per the instructions of Engineer in charge.Second Floor soft construction over main block:-

Fabrication supplying and erecting M.S. tubular trusses of all spans as per approved drawing & design with prefabricated steel applications using quality material and are durable, reliable and corrosion and abrasion resistant. Welding shall confirm to latest structural welding code. Quality shall be on various parameters like shape, size, design gauge and polish. The entire trusses is anchored in RCC column by using 4 nos of M.S. anchor bolts at each support with 10mm thick base plate and shoe plate. The work includes cutting, straightening, placing in position of M.S. pipes and welding wherever necessary and applying one coat of redoxide primer coat to all the members including cost of all materials, labour charges, and hire charges of machineries for cutting, welding, grinding and erection equipments, with all lead and lift, transportation, etc., complete as per specification, along with scaffolding upto the specified roof height as per the instructions of the Engineer-in-charge. Second Floor soft construction over main block:-

Providing TMT steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications. - do - TMT bars Fe 550. Second Floor soft construction over main block:-

Providing TMT steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications. - do - TMT bars Fe 550. Lift for Second Floor soft construction over main block:-

Providing and removing centering, shuttering, strutting, propping etc., for chajjas, corbels etc., including edges including cost of all materials, labour complete as per specification. Second Floor soft construction over main block:-

Providing and laying cinder concrete in cement 1:15 (1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. Second Floor soft construction over main block:-

Providing and Fixing pre painted Puffed galvanised Sheets of 0.4 mm thick sheet in bottom and 0.45 mm thick on the top with the 50 mm thick Puff insulation in between the sheets etc. complete in roofimg over the existing tubular frame works with all self screwing anchor bolts, edge profiles etc, complete.Second Floor soft construction over main block:-

Earthwork excavation for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5m in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50m after breaking of clods complete as per specifications. Second Floor soft construction over main block:-

Earthwork excavation for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5m in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50m after breaking of clods complete as per specifications. Lift for Second Floor soft construction over main block:-

Providing and laying in position plain cement concrete of mix M 1:2:4 with OPC cement @ 240 KGs, with 20mm and down size graded granite metal coarse aggregates @ 0.69CUM and fine aggregates @ 0.45CUM machine mixed, concrete laid in layers not exceeding 15cms thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Second Floor soft construction over main block:-

Providing and laying in position plain cement concrete of mix M 1:2:4 with OPC cement @ 240 KGs, with 20mm and down size graded granite metal coarse aggregates @ 0.69CUM and fine aggregates @ 0.45CUM machine mixed, concrete laid in layers not exceeding 15cms thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Lift for Second Floor soft construction over main block:-

Providing and laying in position reinforced cement concrete of design mix M25 with OPC cement @ 340 KGs, with 20mm and down size graded granite metal coarse aggregates @ 0.70CUM and fine aggregates @ 0.47CUM, with superplastisiser @3 lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not excceding 15 cms thick, vibrated for all works in ground floor level for roof slabs, staircase, lintles and beams retaining walls, return walls, walls (any thickness) including attached plasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM of machinery, curing, scaffolding complete as per specifications. Second Floor soft construction over main block:-

Providing and laying in position reinforced cement concrete of design mix M25 with OPC cement @ 340 KGs, with 20mm and down size graded granite metal coarse aggregates @ 0.70CUM and fine aggregates @ 0.47CUM, with superplastisiser @3 lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not excceding 15 cms thick, vibrated for all works in ground floor level for roof slabs, staircase, lintles and beams retaining walls, return walls, walls (any thickness) including attached plasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM of machinery, curing, complete as per specifications. Lift for Second Floor soft construction over main block:-

Door fixtures for doors (stoppers, handles, aldrops, tower bolts & door closers)Second Floor soft construction over main block:-

Earthwork excavation for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in hard soil above 1.5m in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50m after breaking of clods complete as per specifications. Extra for additional lift of 1.5m or part thereof for excavation in hard soil including cost of materials, labour complete as per specifications Second Floor soft construction over main block:-

Earthwork excavation for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in hard soil above 1.5m in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50m after breaking of clods complete as per specifications.Extra for additional lift of 1.5m or part thereof for excavation in hard soil including cost of materials, labour complete as per specifications Lift for Second Floor soft construction over main block:-

Filling available excavated earth (excluding rock) in sides of foundations upto plinth in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with lead upto 50m and lift upto 1.5m including cost of all labour complete as per specifications.

Filling available excavated earth (excluding rock) in sides of foundations upto plinth in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with lead upto 50m and lift upto 1.5m including cost of all labour complete as per specifications. Lift for Second Floor soft construction over main block:-

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mash concrete including cost of all materials, labour complete as per specifications. Lift for Second Floor soft construction over main block

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth and string courses cost of all materials, labour complete as per Specifications. Lift for Second Floor soft construction over main block (for foundation):-

Providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, piers, abutments, pot and struts square/rectangular/polygon in plan including cost of all materials, labour complete as per Specifications. Lift for Second Floor soft construction over main block (Ground Floor):-

Providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, piers, abutments, pot and struts square/rectangular/polygon in plan including cost of all materials, labour complete as per Specifications. Lift for Second Floor soft construction over main block (First Floor):-

Providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, piers, abutments, pot and struts square/rectangular/polygon in plan including cost of all materials, labour complete as per Specifications. Lift for Second Floor soft construction over main block (Second Floor):-

Providing and removing centering, shuttering, strutting, propping etc., for edges of slabs and breaks in floor, cills, plinth including cost of all materials, labour complete as per specification. Lift for Second Floor soft construction over main block (Ground Floor) (For roof):-

Providing and removing centering, shuttering, strutting, propping etc., for edges of slabs and breaks in floor, cills, plinth including cost of all materials, labour complete as per specification. Lift for Second Floor soft construction over main block (First Floor) (For roof):-

Providing and removing centering, shuttering, strutting, propping etc., for edges of slabs and breaks in floor, cills, plinth including cost of all materials, labour complete as per specification. Lift for Second Floor soft construction over main block (Second Floor) (For roof):-

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as suspended floors, roofs, landings, balconies and likes, thickness upto 200mm including cost of all materials, labour complete as per Specifications. for heights more than 3.50 m from ground level Specification for Heights 0-14mts Lift for Second Floor soft construction over main block:-

Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 proportion cut to required shape, pattern with paper joints, finished with cement mortal using white cement and colour pigments to match the colour of slab making through jointing with sealant, making holes 25mmX12mm grooves in joints including curing etc., complete. Lift for Second Floor soft construction over main block:-

Providing and fixing MS grill work for windows and ventilators using MS flats, or MS square rods, or combination of MS flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM of machinery complete as per specifications. Soft construction over second floor of main block:-

Supplying of recess mounting non integral type ........LED ...... W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded fase ceiling clamps, Power LEDs with CCT 6500 degree K, CRI> 70%. efficacy >100 lumen per watt, 120degree beam spread, life> 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF > 0.95, power loss should < 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, , THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/ CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.LED modular down light 2'x2' 34 -36watts

Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V @ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fighting 1 x 4' - 20/22w

Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V @ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fighting 1 x 2' - 9/10w

Supply of LED Streetlight with pressure die cast aluminum housing body with optimal heat sink for better thermal dissipation. Diffuser with Injection moulded & is made of polycarbonate material with high transmission index, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%. CCT > 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminare > IK08. Power Factor >0.9 with mains .25 watts LED street light

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps.On wall / ceiling / Rafter / Girders

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.1.5 sqmm

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments..2.5 sqmm

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.4 sqmm

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.6 sqmm

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 .6-32Amps SP

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32Amps TPN

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 Amps DP

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.6Way SP &N

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.12Way SP &N

Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completel.20mm

Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completel..25mm

Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.20MM,

Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws..25MM,

Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws..32MM,

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete.1-3Way

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete.6 Way

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete.8Way

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete.10-12Way

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 3 Module. 3.5.1

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 3 Module. 6 Module

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 3 Module. 8 Modul

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 3 Module. 10 -12 Module

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.1.5 sqmm

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.2.5 sqmm

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.4 sqmm

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps one way Switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps 3way socket

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.16Amps Stepped fan Regulator

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.16Amps Flush type SP switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16Amps universal socket

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone socket

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. RJ45/ I.O. outlet

Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A.Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch

Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP ALong point above 6Mtr upto 10Mtr from tapping point to out let via switchi

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws.

Supplying and fixing Race Way 100x50mm Make:MK.150x 50 mm

Supply and fixing of External Angle 100x50

Supplying and fixing regular MCCB distribution Panel confirming to IS 8828, on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440Volts 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCCB/MCB's as outgoings confirming to IS8828.12Way

Supplying and drawing UTP-CAT 6E LAN cable.

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable.2Pair

Supplying of RJ45 connector jack

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-3741979 and with double ball bearing system.48" Sweep (1200mm) Regular model

Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.

Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps. ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire.

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.75x75x65mm

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.100x75x65mm

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.135x160x65mm

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.200x200x65mm

Supplying and fixing PVC/metal conduit Deep junction box.. 19/20mm deep junction box

Supplying and fixing PVC/metal conduit Deep junction box.25mm deep junction box.

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50mm conduit in brick wall

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of 300mm …. etc. as required.20mm

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of 300mm …. etc. as required.25mm

Supplying And Fixing "S" Hook made out of 14mm dia M.S.Rod.

Supplying And Fixing M.S. Rafter Clamp Set made out of M.S. Flat & 14mm M.S. rod.

Supplying And Fixing Metal Fan Box with Round Hook.

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.

Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.Copper wire. 8 SWG

Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.Copper wire.600x600x3mm plate

Supplying of 1.1 KV LT UG cable having aluminum conductor PVC insulated, extruded inner sheathed, galvanized, steel strip (except 2CX10Sq.mm wire armoured) confirming to IS-3975:1990 (No. of Strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP-A.3.5 core 50 sqmm

Supplying of 1.1 KV LT UG cable having aluminum conductor PVC insulated, extruded inner sheathed, galvanized, steel strip (except 2CX10Sq.mm wire armoured) confirming to IS-3975:1990 (No. of Strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP-A.3.5 core 150 sqmm

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required.Pg-61,i-7.8 On wall /Structure.25 sqmm to 75 sqmm

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required.Pg-61,i-7.8 On wall /Structure.95 sqmm to 150Sqmm

Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete. 16SWG

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.100Amps 4x30x6mm Aluminium Strips

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete250Amps 4x30x10mm Aluminium Strips

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy.

Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound.

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board.

Supplying and fixing of Shunt trip suitable for MCCB.CBCT.

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C.

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. ( Icu = Ics). FOUR POLE.100Amps 25kA.

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. ( Icu = Ics). FOUR POLE.200Amps 35kA

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.50x50x6mm

VIVIDH CREATIONS

S NINGAPPA

RG INFRAPROJECTS PVT LTD