Loading
Loading…
Loading…
Tender Value
₹14.4 Cr
EMD Value
₹28.8 L
Closing Date
15 Jun 2026, 3:00 pmClosed
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (WMS)
Above/Below/Par
BADNERA WS
13 conditions · 2 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria:(a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. Definition of Similar Nature of work: The firm should be approved source in any production unit of IR for manufacturing of Railway Rolling Stock or its subassemblies/fabricated steel/ stainless steel/ iron components of Railway Rolling stock on Indian Railways AND/ OR The firm should have carried out Fabrication /Overhauling/ Maintenance / Rehabilitation / Rebuilding / Repair / Manufacture & Supply /Modification of fabricated Iron / Steel / Stainless Steel components/ sub-assemblies of Railway Rolling Stock involving metal cutting and metal welding of Railway Rolling stock- Executed in any unit of Indian Railways or in PSUs manufacturing Indian Railway Rolling Stock.
8 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Document attached: Tender Document
If any discrepancy is found out at any stage between NIT and Tender Document, the conditions in the NIT shall prevail.
BODY POH work of 1050 Wagons (BOXN variant and SS wagons) for a period of one year at Wagon Repair Workshop, Badnera.
BD-WRB-41-Welding-26-27-A
BD-WRB-41-Welding-26-27-A
Open
Works - General
12 Months
Mumbai, Maharashtra
₹0
₹28.8 L
15 Jun 2026
23 May 2026
1 Jun 2026
69 items across 1 schedule · ₹9,41,44,750.39 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | 1/2 Inch (12.7 mm) Dia. Zinc plated/Galvanized Lock Bolt with collar (28G) with Grip Range (12.70-19.05 mm). RDSOs Drg. No. WD-11036- S-01, Alt-Nil & WD-11036-S-02, Alt-Nil. | Numbers | 11030.00 | 25.61 | 2,82,478.3 |
| 2 | 1/2(12.7mm) dia lock bolt grip 37.15 with grip range 37-44 mm or ( 1.500-1.750 inch) (Pin+Coller)Confirming to RDSO Drg. No. WD- 11036-S-01 Alt-1 & WD-11036-S-02 Alt nil. | Numbers | 1764.00 | 32.3 | 56,977.2 |
| 3 | ROUND HEAD LOCK BOLT 1/2 DIA OF GRIP RANGE 1.000-1.250 WITH COLLAR DIA 1/2" TO RDSO DRG. NO. WD-11036-S-01,ALT-NIL &WD- 11036-S-02,ALT-NIL | Set | 6048.00 | 21.03 | 1,27,189.44 |
| 4 | ROUND HEAD LOCK BOLT 3/4 DIA OF GRIP RANGE 1.250-1.500 WITH COLLAR DIA 3/4"" TO RDSO DRG. NO. WD-11036-S-01, ALT-1 & WD- 11036-S-02, ALT-NIL.(USED FOR DOOR CHECK SPRING ) | Set | 8400.00 | 127.44 | 10,70,496 |
| 5 | ROUND HEAD LOCK BOLT-7/8 INCH DIA, GRIP RANGE-57.15 TO 63.50 INCH WITH COLLER-7/8 INCH DIA. TO RDSO DRG. NO.-WD-11036-S-01 ALT-NIL AND WD-11036-S-02 ALT-NIL. | Numbers | 3940.00 | 117.41 | 4,62,595.4 |
| 6 | LOCKING BOLT (consisting of three items: 16X240 Long headed pin, washer of 5 mm thickness and 30 mm OD and a sealing run of dia 6x 41 mm long in UNWELDED condition ) to RDSO Drg. No. WD-90007-S-1, ALT-20 or latest Item 15, for modified door arrangement of BOXN wagon | Numbers | 4200.00 | 41.3 | 1,73,460 |
| 7 | Crib Angle ( Inner) Drawing No. WD - 09034 - S - 16, Alt. 8, Item No. 4 Specn. No. : WD - 01 - CRF - 12,Rev. 1 NB:-Supplier should supply only CRF Section. However postforming or fabrication job and processes will be carried out by Railway. | Numbers | 163.00 | 1,062 | 1,73,106 |
| 8 | Crib Angle (Outer) Drawing No. WD - 09034 - S - 16, Alt. 8, Item No. 3. Specn. No. : WD - 01 - CRF - 12,Rev. 1 NB:-Supplier should supply only CRF Section. However post forming or fabrication job and processes will be carried out by Railway. | Numbers | 260.00 | 2,714 | 7,05,640 |
| 9 | End angle fior BOXNHL as per RDSO drg. nio. WD-09034-S-14, Alt.-13, item-4. Matl.&Spec. As per drg. | Numbers | 122.00 | 1,498.6 | 1,82,829.2 |
| 10 | END CRIB ANGLE FOR BOXNR WAGON TO RDSO DRG. NO. WD-07064-S-01 ALT. NO. 08 OR LATEST ITEM NO. 17 (LENGTH=2960MM) | Numbers | 63.00 | 1,296.82 | 81,699.66 |
| 11 | Stringer (End) for BOXNHL Wagon as per RDSOs Drg No.WD-09034-S-22,Item No.7(e), Alt No.10 and confirming to RDSOs Spec. No. WD - 01 - CRF - 12 (Rev.1) | Numbers | 994.00 | 1,307.44 | 12,99,595.36 |
| 12 | Stringer (centre) for BOXNHL Wagon as per RDSOs Drg. No.WD-09034-S-22, Item No.7(f), Alt No.9and conforming to RDSOs Spec. No. WD-01-CRF-12 (Rev.1) of January 2016. | Numbers | 195.00 | 1,427.8 | 2,78,421 |
| 13 | Stringer (outer) for BOXNHL wagons as per RDSO Drg No.WD-09034-S-22,item no-07(d) ,Alt-09 or latest material & specification as per Drg | Numbers | 260.00 | 489.7 | 1,27,322 |
| 14 | Stringer Inner for BOXNHL as per RDSO Drg.no WD-09034-S-15, Alt 4 or latest, item no. 3 | Numbers | 2033.00 | 1,444.32 | 29,36,302.56 |
| 15 | STAINLESS STEEL SHEET 3 MM THICK TO IRS M- 44/97, IN STD. SIZE FOR BOXNR/BOXNHL WAGONS | Kg | 10617.00 | 156.94 | 16,66,231.98 |
| 16 | STAINLESS STEEL PLATE FOR BOXNHL TO IRS: M44-97 TO THICKNESS 4 MM, WIDTH1250 MM, LENGTH 3000MM | Quintal | 1900.50 | 15,401.49 | 2,92,70,531.75 |
| 17 | STAINLESS STEEL PLATE 6 MM THICK AS PER SPECIFICATION IRSM-44-1997 SIZE 1250X2500X6 MM (PLATE SHOULD BE PACKED PROPERLY WITH WOODEN PACKING) | Kg | 2541.00 | 160.8 | 4,08,592.8 |
| 18 | STAINLESS STEEL PLATE 8 MM THICK TO IRS M- 44/97 IN STANDARD SIZEIRS M-44/97 as perSpecn. IRS M-44/97 | Kg | 4638.00 | 156.94 | 7,27,887.72 |
| 19 | Mild Steel Channel ISMC, Size : 100 x 50 x 5 x 12000 to the Specification IS : 2062 : 2011 E250 Grade A Cu. as per Drg.No. ISMC02 SIZE 100X50X5X12000 specn: IS : 2062 : 2011 E250 Grade A Cu | MT | 59.00 | 67,575.06 | 39,86,928.54 |
| 20 | Mild Steel Channel ISMC 250 x 82 x 9 x 12000 to the specification IS:2062:2011 E 250 Grade A Cu. | Kg | 2184.00 | 72.57 | 1,58,492.88 |
| 21 | Mild Steel Sheet 3.15X1250X2500 to the Spec. IS: 1079-2009 Grade HR1 Cu | Kg | 14700.00 | 69.41 | 10,20,327 |
| 22 | Mild Steel Plates 5 x 1250 x 6300 to the Specification IS:2062:2011 Grade E 250 A Cu | MT | 147.00 | 68,429.38 | 1,00,59,118.86 |
| 23 | Mild steel plate 6 X 1000 X 4500 to the specification IS:2062/2011 Grade E 250 A | MT | 70.56 | 74,445.52 | 52,52,875.89 |
| 24 | Mild Steel Plates 8x1250x5000 to the Specification IS:2062:2011 Grade E 250 A Cu | MT | 10.50 | 58,299.72 | 6,12,147.06 |
| 25 | Body side stanchion for BOXNHL (length- 650mm)to Drg.No.SCR/C&W/SK-1238 & provision of outer holes for stanchion from centre line of stanchion as per Drg. No.RYPS/SCR/ C&W/SK-1019 | Numbers | 162.00 | 9,086 | 14,71,932 |
| 26 | Body side stanchion (length-500mm) to Drg. No. SCR/C&W/SK-1239 & provision of outer holes for stanchion from centre line of stanchion as per Drg. No. RYPS/SCR/ C&W/SK- 1019 Drg.No.SCR/C&W/SK-1239 & provision of outer holes for stanchion from centre line of stanchion as per Drg. No.RYPS/SCR/ C&W/SK- 1019. | Numbers | 216.00 | 3,888.1 | 8,39,829.6 |
| 27 | Body side stanchion for BOXNHL (750mm) to Drg.No.RYPS/SCR/C&W/SK-0188 | Numbers | 18.00 | 4,295.2 | 77,313.6 |
| 28 | Corner Stanchion CRF ANGLE 100X100X10MM, LENGTH=2277 MM to IRS M-44 for BOXNR wagon as per RDSO Drawing No.WD-07001-S- 10, Item No.05, Alt.12 | Numbers | 10.00 | 4,897 | 48,970 |
| 29 | END TOP COPING FOR BOXNHL WAGON. as per Drg.No. RDSO DRG.NO. WD-08030-S-01, ALT- 02, ITEM NO. 04 to NCR PL NO 38470032 | Numbers | 35.00 | 4,809.68 | 1,68,338.8 |
| 30 | SIDE TOP COPING FOR BOXNHL WAGON TO RDSO DRG. NO. WD-09034-S-05, ALT. 3, ITEM NO. 3 .ER PL No : 3840N001 | Numbers | 13.00 | 19,316.6 | 2,51,115.8 |
| 31 | FLAP DOOR CHAINLESS COTTER TO IRS DRG.NO.W/DW-297 ALT-1 | Numbers | 4200.00 | 133.39 | 5,60,238 |
| 32 | FLAP DOOR CHAINLESS COTTER RIVET TO RDSO DRG. NO. WD-90007-S-01, ALT. 19, ITEM NO. 2 | Numbers | 8400.00 | 31.51 | 2,64,684 |
| 33 | DOOR HINGE FOOT WITH 4 HOLES OF 17.5 mm DIA & 2 HOLES OF 21.5 mm DIA. TO IRS DRG NO.W/DW - 287 ALT - 5 | Numbers | 1400.00 | 277.3 | 3,88,220 |
| 34 | Flap Door Arrangement BOXNHL (Reduced Height) as per RDSO Drawing No: WD-23018-S- 02, Item no: 3,4,5a,5b,5c,10,12,13,14,16 in Assembled condition. Material and specification as per drawing | Numbers | 1400.00 | 4,012 | 56,16,800 |
| 35 | Modified Flap Door Assembly for BOXN Wagon- -- RDSO drawing no. WD-23018-S-01, item no1,4,5,6,7,9,10 & 19 in assembled condition | Numbers | 700.00 | 4,897 | 34,27,900 |
| 36 | Door way cross bar pressing with back plate and packing piece,for Box-N wagon to RDSO Drg.No.WD-80007-S-05,Alt.- 27, Item No.2,14 and 15 in assembled condition | Numbers | 700.00 | 5,664 | 39,64,800 |
| 37 | DOOR WAY STIFFENING CROSS BAR FOR BOXNHL WAGON. RDSO DRG.NO. WD-05086-S- 05, ALT-06, ITEM NO. 02. Spec | Numbers | 1400.00 | 2,807.79 | 39,30,906 |
| 38 | Door hinge pin to Drg. No.: S.E.C. Rly./SK No.: WRS/R-1352, Alt.-1. Material & Specification as per drg. Material specification : IS:2062 Fe 410 WA. | Numbers | 6300.00 | 23.13 | 1,45,719 |
| 39 | BOGIE CENTRE PIVOT TOP (BOXNHL) FOR CASNUB 22 HS BOGIES TO RDSO DRG. NO. WD-97049-S-3, ALT-9, ITEM-2. MATERIAL AND SPECIFICATION AS PER DRAWING. THIS ITEM IS RESERVED FOR PROCUREMENT FROM RDSO APPROVED SOURCES ONLY | Numbers | 60.00 | 8,258.82 | 4,95,529.2 |
| 40 | TOP SIDE BEARER LINER TO RDSO DRG.NO.WD-80007-S-08, ALT-.8, ITEM-4, MATERIAL AND SPECIFICATION CONFIRMING TO IS:2062-2011(RA:2021) WITH AMENDMENT NO.1 OF NOV.2012, GR. E 250 A INSTEAD OF GR. E250 CU A. | Numbers | 2082.00 | 849.48 | 17,68,617.36 |
| 41 | Tarpaulin cleat for BOXNHL & BOXNHL MBS wagon as per RDSO Drg. No. WD-05086-S-5 Alt. 6 or latest item No.09 | Numbers | 1592.00 | 32.66 | 51,994.72 |
| 42 | Tarpaulin cleat for BOXN as per IRS DRG. No. W/ML-2726, ALT-2 and Material conforming to IS: 2062-2011 | Set | 3115.00 | 23.48 | 73,140.2 |
| 43 | TOWING HOOK TO IRS DRG.NO.W/ML-2724. ALT : NIL | Numbers | 233.00 | 522.74 | 1,21,798.42 |
| 44 | LADDER PIPE FOR BOXN, BOXNHS WAGONS ITEM NO.7 OF WD-80007-S-06,ALT 16 | Numbers | 362.00 | 73.16 | 26,483.92 |
| 45 | BODY SIDE HAND HOLD TO RDSO DRG.NO.WD- 80007-S-05 ITEM:9, ALT.24 | Numbers | 700.00 | 66.08 | 46,256 |
| 46 | Tail Lamp Bracket to IRS Drg No. - C/BF-1113, Alt-nil | Numbers | 467.00 | 95.58 | 44,635.86 |
| 47 | Ladder hand hold for BOXN wagon. RDSO Drg. No. WD-80007-S-06, Item-08. ALT:17 | Numbers | 595.00 | 79.06 | 47,040.7 |
| 48 | PERSHAD LABEL HOLDER TO IRS DRG.NO.W/ML-11, ALT-2 AND MATERIAL CONFORMING TO IS:1079:2009 Amendment NO.1 OF NOV.2012,Gr.-HR2.'.... [Qty: 220 Nos.] | Numbers | 971.00 | 46.02 | 44,685.42 |
| 49 | Door Check Spring for BOXN Wagon to IRS Drg. No. W/DW-305D, Alt. 6 | Numbers | 4200.00 | 529.82 | 22,25,244 |
| 50 | BODY SIDE STANCHION 500 MM TO SCR DRG NO.RYPS/SCRC&WSK-0189 ALT - NIL. | Numbers | 126.00 | 2,614.88 | 3,29,474.88 |
| 51 | BODY SIDE STANCHION (1000 mm). TO SCR DRG NO.RYPS/SCR/C&W/SK-0187 ALT - Nil | Numbers | 126.00 | 4,302.28 | 5,42,087.28 |
| 52 | Body side stanchion (750mm) to Drg.No.RYPS/SCR/C&W/SK-0188 as per Drg.No.RYPS/SCR/C&W/SK-0188 | Numbers | 126.00 | 4,295.2 | 5,41,195.2 |
| 53 | M-20 CSK Head Screw with Nut to RDSOs Drg No- WD-85079/S-1, Item No- 13, Alt No- 11(Eleven) or Latest. Size of CSK HEAD Screw will be M-20 x 100 Long. | Numbers | 1901.00 | 31.82 | 60,489.82 |
| 54 | IS EQUAL ANGLE 100X100X10 MM IN LENGTH 6 Mtrs AND ABOVE TO IS8081989 REAFFIRMED 2004 AND IS 2062:2011 WITH AMENDMENT NO. 1 OF NOV. 2012 GRADE IS 2062:2011 E250 A | Kg | 652.00 | 62.5 | 40,750 |
| 55 | IS EQUAL ANGLES 50 X 50 X 6 MM TO SPECN. NO. IS-2062-2011 E250A GR-A IN STD. LENGTHS. | Kg | 21620.00 | 64.36 | 13,91,463.2 |
| 56 | FOOT STEP FOR BOXN WAGON TO RDSOS DRG. NO. WD-80007-S-10, ALT. NO. 24 [TWENTY FOUR], ITEM NO. 34. MATERIAL AND SPECIFCATION CONFORMING TO IS: 2062-2011 (RE-AFFIRMED 2021), GR E-250 A. | Numbers | 459.00 | 293.82 | 1,34,863.38 |
| 57 | Complete Ladder assembly for BOXN Wagon to RDSO Drg .No. WD-80007-S-06, Alt-18, Item -7, 18,19 & 20. for item No. 18, 19 & 20, Material should be to IS: 2062-2011,.amendment no.1 of Nov.2012, Gr. E 250 A Insteadof Gr. E 250 Cu A. | Numbers | 63.00 | 1,298.59 | 81,811.17 |
| 58 | CORNER CONNECTING PLATE FOR BOXN AS PER DRG. No. WD - 80007-S-06,ALT-20, ITEM NO12 | Numbers | 200.00 | 106.05 | 21,210 |
| 59 | 7/8"(22.2 mm ) Dia Zinc plated/ Galvanised lock bolts with collar (Part No.2832) with grip range 50.80-57.15 mm | Numbers | 2112.00 | 150.89 | 3,18,679.68 |
| 60 | Bracket for locking bolt for BOXN wagon to RDSO Drg. No. WD-90007-S-1, Item 14, Alt. 13. RDSO Drg. No. WD-90007-S-1, Item 14, Alt. 13. Spec:Bracket for locking bolt for BOXN wagon to RDSO Drg. No. WD-90007-S-1, Item 14, Alt. 13 | Numbers | 4200.00 | 22.13 | 92,946 |
| 61 | Cross Bar for Box-N wagon DRG. No. WD- 80007-S-15 Alt.20, or latest Item 6. | Numbers | 94.00 | 1,898.62 | 1,78,470.28 |
| 62 | BOGIE CENTRE PIVOT TOP (BOXN) FOR CASNUB BOGIES TO RDSO DRG. NO. WD-85079-S/2, ALT-27, ITEM NO. 2. OTHER TECHNICAL REQUIREMENT TO STR NO. WD21-CASNUB- 22NLB BOGIE-93, REV. 2 OF JULY 2002. LATEST AMENDMENT 06 OF JULY 2020 FOR BOXN WAGON | Numbers | 224.00 | 5,298.2 | 11,86,796.8 |
| 63 | CSK-HEAD SCREW M-20X120-4.8 to IS 1367:Part 3:2017 & IS 1365:1978 with NUT M- 20-4 to IS 1363:Part 3:2018 | Numbers | 789.00 | 34.18 | 26,968.02 |
| 64 | Side Middle Coping (Doorway) for BOXNHL wagon to RDSO Drg. No WD-08030-S-01, Alt-2 or latest, Item-9 Accepted description: Side Middle Coping (Doorway) for BOXNHL wagon to RDSO Drg No WD-08030-S-01, Alt-2, item-9 | Numbers | 378.00 | 702.1 | 2,65,393.8 |
| 65 | Side Middle Coping for BOXNHL wagon as per RDSO's Drg.No.WD-08030-S-01,item no08,Alt- 02 and conforming to RDSO's Spec. No. WD-01- CRF-12(Rev.- 1) of January 2016 | Numbers | 976.00 | 702.1 | 6,85,249.6 |
| 66 | Compressed Oxygen Gas (Grade 3) in cylinder for industrial use at ambient temperature to IS: 309: 2023(Fifth Revision) | cum | 9240.00 | 51 | 4,71,240 |
| 67 | WASHER FOR CENTRE PIVOT ASSEMBLY TO RDSO DRG NO : WD-85079-S-02 , ITEM - 4, ALT : 27. | Numbers | 1697.00 | 84.96 | 1,44,177.12 |
| 68 | SHACKLE LOCK AND LOCK PIN with Split pin to RDSO'S DRG NO. WD-85079-S/2, ITEM NO. 7 & 8, ALT.NO. 27 | Set | 1641.00 | 100.06 | 1,64,198.46 |
| 69 | 3/4'' dia Lock bolt with Collar required griprange 0.750 to 1.000 (2412)confirming to RDSO DrgNo. WD-11036-S-01, Alt.Nil and WD- 11036-S-02, Alt.Nil | Set | 3886.00 | 62.75 | 2,43,846.5 |
| Schedule total | ₹9,41,44,750.39 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderDocument1050WagonsUpdatedfinal.pdf Tender Document
ATTACHMENT
REQDDRGFOR1050NOSWAGONSPart-A.pdf
ATTACHMENT
REQDDRGFOR1050NOSWAGONSPart-B.pdf
ATTACHMENT
REQDDRGFOR1050NOSWAGONSPart-C.pdf
ATTACHMENT
TenderDocument1050WagonsUpdatedfinal.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .