SMART PERIODICAL SERVICES TO CERTAIN ACCN UNDER GE (NORTH) UDHAMPUR

Amount

Demolition of cement concrete (Un-reinforced) as in ground floor, not exc 15cm in thickness, at any position, complete all as specified and directed.

Dismantling wall and ceiling boards, fibre, pulp, insulation etc.) or insulation boards/ slabs/ blankets of any thickness including cover fillets, complete all as specified and directed.

Demolition of brick work or stone boulder masonry, built in cement mortor including all quoins, arches, pillars etc., complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 mtr mean radius, build in CM 1.6, complete all as specified and directed.

S&F 4mm thick non asbestos fibre cement building board, fixed or inserted to timber/ GI/ Aluminium grid/ frame work with screws, complete all as specified and directed.

S&F anodised aluminium snap grid frame work for false ceiling, complete all as specified and directed.

Dismantling asbestos cement (corrugated or semi corrugated etc.) sheet as in roof covering including ridges, complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of thickness 0.50mm of any colour, having tensile strength of 550 Mpa as in roof covering/ cladding to wall and fixed with self tapping screws, complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based plain steel sheet of thickness 0.50mm of an colour, having tensile strength of 550 Mpa as in roof covering, cladding to wall, ridges, hips, valley gutters etc. and fixed with self tapping screws, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description and in any position, complete all as specified and directed.

M&L for mild steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes, conforming to IS:1161-1998, Grade ST-240, complete all as specified and directed.

M&L for mild steel as in roof trusses (framed), trusses, purlins, crane ganttries, rails and fastering and heavy brackets framing (beam, tee, angle, channel or flat sections) and including distance piecess, cleats etc., conforming Fe-410W (Gde-E-250, Quality - A), complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates), complete all as specified and directed.

M&L for machine pressed cement concrete interlocking paver block, glossy finish, any shape and size, confirming to IS:15658-2006 of 60mm thickness, M-35 grade, laid with grey cement and pigment over and including 25mm thick sand cushioning, complete all as specified and directed.

Taking down cement plaster on brick walls, stone masonry, concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 with using water proofing compound, finished the surface even and smooth without using extra cement, complete all as specified and directed. Note :- WPC shall be measured and paid separately under respective item of BOQ.

Supply only integral water proofing compound.

M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6, finished the surface even and smooth without using extra cement, complete all as specified and directed. Note :- WPC shall be measured and paid separately under respective item of BOQ.

M&L for preparation of new decorated surfaces of wall and applying two coats of oil emulsion paint over and including a coat of 1mm thick wall care putty, complete all as specified and directed.

M&L for preparation of new surfaces of wall and applying two coats of cement base paint over and including a coat of alkali resistant primer, complete all as specified and directed.

M&L for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in floors, leveling course, finished the surface even and smooth without using extra cement, complete all as specified and directed.

Dismantling floor, hearth or wall tiles including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for 7-8mm thick non skid coloured ceramic tiles, area of each tile exc. 0.11 Sqm but not exc 0.18 Sqm, laid in floor over and including 15mm thick screed bed or bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

M&L for 10mm thick vitrified ceramic tiles of any colour (Square or rectangular), polished, area of each tile not exc 0.36 Sqm, laid in floors over and including 15mm thick screed bed or bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 6-7mm thick as on verticle surfaces, fixed on wall or verticle surfaces over and including 10mm thick plaster/ backing coat in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description, exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for preparation of old steel or iron surfaces of any description, exceeding 10cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed.

S&F solid PVC wall lining (wall panelling) consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame, complete all as specified and directed.

M&L for complete removal of existing treatment by scraping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia 7" / 9" to make the surface free from dust, loose paint etc. by skilled labour, complete all as specified and directed.

M&L for water proof cement based putty @ 1.0 Kg (undiluted) per Sqm of average thickness 1.0mm, over the plastered/ old painted wall after, scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps :- Step 1 - Mix the putty powder by adding water as per manufacturer's instructions and mix it with putty mixer with the capacity of min 2.5 KG putty per minute. Step 2 - Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed spray machine of putty application having flow speed of max 6 ltrs per minute with a maximum pressure 3300 PSI. Step 3 - Allow 6-8 hours time dry the putty surface.

M&L for applying two coats of oil bound distemper using airless technology with max working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro paint manufacturer and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface, complete all as specified and directed. Note :- Sanding of surface to be done by mechanical sander with 1500-2700 RPM with internal dust extraction system for clean environment certified by paint manufacturer.

M&L for one coat of acrylic water based exterior grade primer @ 0.80 ltr (undiluted) Per 10 Sqm, diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr Per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting subsequent coats, complete all as specified and directed.

M&L for two coats water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & colour stay technology, excellent Drit pick up resistance with low VOC less than 50 Gram / litre as per LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltrs (undiluted with water as per manufacturer's instructions applied over priming coat with fully automatic airless stray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint, complete all as specified and directed. Notes for Serial item Nos 29.00 to 33.00 :- (a) The work pertaining to periodical services & water proofing shall be executed from authorized applicator through manufacture of which the materials .i.e. paint, distemper, cement base paint, putty etc. is proposed to be used by the contractor and approved by Garrison Engineer before execution of work. (b) Site for application is at various locations and height building(s) upto 15.0 mtr. (c) All scaffolding work and safety measures such as provision of props and supports shall be of steel and extent of provision shall be entire to satisfaction, (d) The quoted rates shall be deemed to include for cleaning of window glass pane, floors.

M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, plasters etc. including brooming with steel wire brushing, scrapping down small soots, moulds, moss, efflorescent, salts, trading oil, greasy spots and applying one coat of white wash, complete all as specified and directed.

M&L for preparation of old surfaces (plastered or unplastered) of ceiling including cornices, plasters etc. including brooming with steel wire brushing, scrapping down small soots, moulds, moss, efflorescent, salts, trading oil, greasy spots and applying one coat of white wash, complete all as specified and directed. Notes for Serial item Nos 34.00 & 35.00 :- (a) Site for application is at various locations and height building(s) upto 15.0 mtr. (b) All scaffolding work and safety measures such as provision of props and supports shall be of steel and extent of provision shall be entire to satisfaction, (c) The quoted rates shall be deemed to include for cleaning of window glass pane, floors.

anil construction co.

M/s LAL DAYAL CONSTRUCTION CO

KUMAR CONSTRUCTION CO