Construction of Temporary Site Office, Gurugram University, Haryana

Amount

Providing & fixing of composite factory made dis-continuous prefabricated sandwich panel – LP/HP-80mm thick PUF for wall comprising of two sides facing of colour coated Galvanised steel sheet and sandwiched between them CFC free close cell high Density rigid polyurethane foam 40±2 kg/m3 having a thermal conductivity value of 0.023 w/mk. The outer & inner sheet shall be off white RAL9002 galvanised steel sheet of 0.5mm TCT steel min.240 Mpa having a coating Mass of min.120 gsm zinc coating total of both sides as per IS: 277 and finished with 20 microns colour coating of SMP polyester quality paint coat over a 5 micron primer on exposed side and back coat of 5 microns on inner side over a 5 microns primer. The outer and inner sheet shall have a core of 50mm thick polyurethane foam insulation. The PUF insulation shall have fire retardant and self-extinguishing properties as per IS 12436. The panels should be of required length and in 1190mm width with tongue and groove arrangement on the sides having hidden fastener jointing arrangement. The prefabricated panels shall be fixed to the support structure. The metal sheet shall conform to IS: 277 & 14246. The polyurethane insulation shall conform to IS:12436.The work shall be carried out as per direction of E.I.C. (NS)

Providing & fixing of composite factory made dis-continuous line prefabricated sandwich LP/HP-PUF 50/80mm roofing panel comprising of two sides facing of colour coated galvanised steel sheet and sandwiched between them CFC free close cell high density rigid Polyurethane(PUF) foam insulation of 40±2 kg/m3, having a thermal conductivity value of 0.023 w/mk. The top & bottom sheet shall be off white RAL9002 galvanised steel sheet of 0.5mm TCT steel min.240 Mpa having a coating Mass of min.120 gsm zinc coating total of both sides as per IS: 277 and finished with 20 microns colour coating of SMP polyester quality paint coat over a 5 micron primer on exposed side and back coat of 5 microns on inner side over a 5 microns primer. The top sheet shall have profile depth of 41-44 mm at a pitch distance of 300-333mm.The inner sheet shall be in the form of a liner tray. The outer profile sheet and the inner liner tray shall have core of 50mm thick Polyurethane (PUF) foam insulation. The PUF insulation shall have fire retardant and self- extinguishing properties as per IS 12436. The panels should be of required length and 1Mtr in width. The prefabricated panels shall be fixed through the profiles directly to the purlins using self-drilling fasteners with neoprene washers mechanically with the help of machines. The metal sheet shall conform to IS: 513, AS: 1397 & 2728. The Polyurethane foam (PUF) insulation shall conform to IS: 12436. (NS)

Providing & fixing of flashing, Gutter, Down Take Pipe made out of 0.5mm TCT Galvanized steel sheet

Providing & fixing of Guttermade out of 0.5mm PPGI/PPGL Sheet Including ridge cap

Providing & fixing of Down Take Pipe made out of PPGI/PPGL.

Earth Filling under floors with Tibba sand taken from outside the campus area with all lead & lift, including loading, unloading, laid in 25 cm layers including campactionupto 98% of SPD with sheep foot roller/ soil compactor, watering compensation of earth etc. complete in all respect with entire satisfaction of Engineer in charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete………...Flexible Pipe (a) 32 mm dia (for wash basin)

Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete………...Flexible Pipe..b) 40 mm dia (for sink and urinal)

White Vitreous flat back Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Providing and fixing CP Brass 32mm size Bottle Trap of bapproved quality & make and as per the direction of Engineerin- charge.

Providing & fixing C.P. Brass health faucet for ablution with 1 meter long PVC tube, hand shower, couplings, wall hook and other accessories.

Providing & fixing C.P. Brass Double coat Hooks with CP screws.

Providing and fixing of C. P. brass towel ring complete with C.P. brass brackets

Providing and fixing CP Brass liquid soap dispensor 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket and all fittings of the same material of approved quality and colour.

Providing & fixing of approved coloured verticle type hot water geysers. The inner container shall be made of copper sleeve with PUF insulation between inner and outer container, element pipe and heating element, pressure cum vaccume release, thermostat and thermal cutout arrangements and fusible plug. The outer container shall be of powder coated finish with all other accessories including fixing brackets complete as required.

Wall Mountable Water Purifier With Transparent Cover. Mineral ROTM Technology - Double Purification by RO+UF with TDS Controller - KENT PRIDE

Providing & fixing 15 mm nominal bore 45 cm long unplasticised PVC connection pipe with brass unions…...45 cm length………..15 mm nominal bore

Providing & fixing 15 mm nominal bore C.P brass Angle valve for basin and sink of approved quality conforming to IS 8931……..15 mm nominal bore

Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes CTS-SDR 11, class-1 CPVC Pipes (pressure rating 28 kg/cm2 at 23oC and 7 kg/cm2 at 82oC) confirming to IS : 15778-2007, ASTM D-2846, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge........Concealed work including cutting chase and making good the wall etc........a) 15mm nominal outer dia pipes

Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes CTS-SDR 11, class-1 CPVC Pipes (pressure rating 28 kg/cm2 at 23oC and 7 kg/cm2 at 82oC) confirming to IS : 15778-2007, ASTM D-2846, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge........Concealed work including cutting chase and making good the wall etc........b) 20mm nominal outer dia pipes

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382............The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site.............a) 110 mm dia (Wall Thickness - 3.2 to 3.8 mm)

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6 Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with cement concrete 1:2:4 complete as required.................32 mm dia.

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6 Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with cement concrete 1:2:4 complete as required.................50 mm dia.

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete in all respects. ………...Multi Floor Trap (5" Ht) with height raiser and branch saddle strip of 50/75 mm outlet

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete in all respects. ………..Plain Floor Trap 100X100 outlet and with height raiser

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete in all respects. ………..P-Trap type Floor Trap 110 x 110 mm

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete in all respects. ………..Floor drain size:(100X50)

Hi Wall Split Units :-Supply, installation, testing and commissioning of 5 star rated Air Cooled split type Air-conditioning Unit consisting of Condensing Unit and Indoor Unit with control panel of the unit and all internal electrical power and control wiring accessories and ancilliary items like thermostats/ MS frames,stabilizer etc of below non. cooling capacity Complete in all respect as per drawings,specification,standards. ......(a) 2.0 TR

Hi Wall Split Units :-Supply, installation, testing and commissioning of 5 star rated Air Cooled split type Air-conditioning Unit consisting of Condensing Unit and Indoor Unit with control panel of the unit and all internal electrical power and control wiring accessories and ancilliary items like thermostats/ MS frames,stabilizer etc of below non. cooling capacity Complete in all respect as per drawings,specification,standards. ......(b) 1.5 TR

Supply, installation, testing and commissioning of of copper refrigerant piping between the indoor and the outdoor unit complete with all supports,joints, refrigerant pipe insulation and accessories for the above unit.including insulation………...(a) copper refrigerant piping (2.0 TR)

Supply, installation, testing and commissioning of of copper refrigerant piping between the indoor and the outdoor unit complete with all supports,joints, refrigerant pipe insulation and accessories for the above unit.including insulation………...(b) copper refrigerant piping (1.5 TR)

Propeller Type fans :Supply,installation,testing and commissioning of Propeller type free discharge exhaust fans complete with motor, fan ,exhaust Louvers as per drawings and specifications. …….(a) 200 mm dia

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.DSR-2018-1.21.3………...c) 32mm dia conduit pipe

Supplying and fixing 11/0.4 KV enamel coated danger board size 200x250mm with clamp on existing HT/LT structure / poles. (2.22 DSR-18)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. DSR-2018-9.1.26……(a) 3.5 x 70 sq.mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. ………..(b) 4 x 25 sq.mm DSR-2018-9.1.34

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. ………..(c) 4 x 16 sq.mm DSR-2018-9.1.33

Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.DSR-7.9

Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.......(a) 150 mm width X 50 mm depth X 1.6 mm thickness DSR-2018-4.1.2

Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.......(b)300 mm width X 50 mm depth X 1.6 mm thickness DSR-2018-4.1.4

Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.......(c) 400 mm width X 50 mm depth X 2 mm thickness DSR-2018-4.1.2

Supply and fixing of surface mounting type Led light fixture, LED of 1 to 3 W each assembled on single MCPCB, having color temp 6500K & having 50000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy>80lm/W. LED driver, PF 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70. Housing made of CRCA with glare free diffused polycarbonate cover. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer manadatory. i/c connection wire, testing etc. to complete the job. 2 Yrs Guarantee certificate from manufacturer. (NS) Make-Havells/Wipro/Bajaj...............Led luminiare 2' X 2', 36W , 4-6.5k

Supplying and fixing surface mounting LED down lighter, LED of 1 to 3 W each assembled on single MCPCB, having color temp 6500K & having 50000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy>80lm/W. LED driver PF 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70. Housing made of CRCA powder coated frame with glare free diffused polycarbonate cover. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory. i/c connection wire, testing etc. to complete the job. (NS)Make-Havells/Wipro/Bajaj..............15 W , 180/200mm

Supplying and fixing surface mounting LED down lighter, LED of 1 to 3 W each assembled on single MCPCB, having color temp 6500K & having 50000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy>80lm/W. LED driver PF 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70. Housing made of CRCA powder coated frame with glare free diffused polycarbonate cover. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory. i/c connection wire, testing etc. to complete the job (NS) Make-Havells/Wipro/Bajaj.............7 W/8 W, 100/150mm

Supplying fixing and testing of LED Batten type Tube fitting with epoxy white powder coated CRCA sheet steel complete fixing wall/ceiling on PVC clamp/round plate with necessary materials complete as required. Make-Havells/Wipro/Bajaj………...LED 1 X 20 watt

Supplying, fixing and testing of approved make modular integral step / skirt LED bulk head light suitable for 3 module box and plate including fixing on wall as required, with necessary material complete. Make-Havells/Wipro/Bajaj

Supplying, erection and testing of approved make electric 1200 mm Ceiling fan of double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 volts including connections with all necessary material complete of approved as required confirming to IS :374/1979 with up to date ammendments. Make-Havells/Orient/Bajaj

Supplying, erection and testing of approved make Wall Mounting fan complete with Wall Bracket ,canopy, blades, speed Regulator etc .A.C 230-250 volts with connections and including raw bolt/Anchor hole fastener etc. complete finished of approved as required. Havells/Orient/Bajaj..............a) 400 mm sweep

Supplying, fixing, connecting, testing and commissioning of mirror light luminaire with 1 x 14 watt complete with electronic ballast, lamp including connection etc. complete as required Make- Havells/Orient/Bajaj

Supplying and fixing of Deluxe fresh air fan with louvers ( ventilating fan ) with self closing louvers of decorative PVC blades mounting square frame of approved make complete with all necessary material as required Make- Havells/Orient/Bajaj………….c) 200 mm dia fresh air fan

Supplying and fixing of LT Panel accessories of approved make in existing LT Panel including connections etc.as required as per spececification………….Frequency Meter

Supplying and fixing of LT Panel accessories of approved make in existing LT Panel including connections etc.as required as per spececification………….LED lamp indicator

Providing and fixing 1.6 mm thick steel sheet factory fabricated powder coated floor reccessed raceway of the following sizes including providing removable cover, knock out holes and fixing accessories earthing with 8 SWG earth wire complete as required including floor supports, bends, access boxes, tap off boxes and cross over as per site requirement...............(a) 300mm wide x 40mm deep raceway

Providing and fixing 1.6 mm thick steel sheet factory fabricated powder coated floor reccessed raceway of the following sizes including providing removable cover, knock out holes and fixing accessories earthing with 8 SWG earth wire complete as required including floor supports, bends, access boxes, tap off boxes and cross over as per site requirement...............(b) 100mm wide x 40mm deep raceway

Providing and fixing 1.6 mm thick steel sheet factory fabricated powder coated floor reccessed raceway of the following sizes including providing removable cover, knock out holes and fixing accessories earthing with 8 SWG earth wire complete as required including floor supports, bends, access boxes, tap off boxes and cross over as per site requirement...............(c) 75mm wide x 40mm deep raceway

Providing and fixing 350 x 350 x 50mm deep 1.6mm thick GI sheet junction box including providing 2mm thick stainless steel cover as per specification.

Providing and fixing 150 x 150 x 50mm deep 1.6mm thick GI sheet junction box including providing 2mm thick stainless steel cover as per specification.

Bidder Name

Amount

CACTUS PROFILES PVT LTD

AVNG Infrastructures Pvt Ltd

Sarthak Contracts Private Limited

Sarthak Contracts Private Limited

AVNG Infrastructures Pvt Ltd

CACTUS PROFILES PVT LTD

AVNG Infrastructures Pvt Ltd