Procurement of various Scientific Equipments at Gondwana University Gadchiroli (Third Time)

Polarized Optical Microscope with Hot stage: Optical system: CFI60 infinity, Illumination: 12V-50W halogen lamp; 12V-50W DC transformer built-in; Diascopic/episcopic illumination changeover switch; Fly-eye lens; NCB11, ND8 filters built-in; 12V-100W type optional, Focusing: Coaxial coarse/fine focus knob; Focus stroke: 30mm; Coarse: 14mm per rotation; Fine: 0.1mm; Minimum reading: in 1µm increments, Eyepieces (F.O.V., mm): CFI 10X (22), CFI 10X CM (22), CFI 12.5X (16), CFI 15X (14.5), Tubes: P-TT3 Trinocular Tube for polarizing microscopy; P-TB2 Binocular Tube for polarizing microscopy, Analyzer: 360° rotary dial; Minimum reading angle 0.1°, Nosepiece: Centering quintuple nosepiece (detachable); DIN slot, Stages: Top-grade dedicated circular graduated stage Rotatable 360° horizontally; can be fixed at a specific position; Graduated 360° (in 1° increments); Click stops each 45°; Attachable mechanical stage: 35 x 25 mm travel; vernier 0.1mm, Condenser: Dedicated strain-free swing-out type; P Achromat NA 0.9, Polarizers: Fixed to the bottom of the condenser holder; with scale markings, Objectives (Polarizing sets): CFI Achromat P 4X, P 10X, LWD P 20X, P 40X, P 100X Oil CFI TU Plan Fluor EPI P 5X, P 10X, P 20X, P 50X, P 100X, Episcopic illuminator: LV-UEPI-N Universal Epi-illuminator (The LV100N POL accommodates a 12V-50W illuminator transformer), Compensators: P-CL Standard 1/4 λ & tint plate, quartz wedge or Senarmont compensator can be inserted into intermediate tube slot, Power consumption: 1.2A/75W, Hotstage specification: Temperature range < -195°C to 420°C, Sample area of 53.5mm x 43mm, 15mm XY manipulation as standard, Sample holder for standard 76mm x 26mm microscope slides, Quick-release gas valves for atmospheric control, Swing out lid for easy sample loading, Can be used with transmitted or reflected light, Mounts directly to microscope table or substage, Stage body size 166mm x 90mm x 24mm, 100 Ohm platinum sensor, Temperature stability <0.01°C, Inner lid to increase temperature stability, Direct injection of coolant into block, Highly conductive metal for improved heat transfer, Minimum heating rate 0.01°C/min, Maximum heating rate of 50°C/min, Objective lens minimum working distance 6.5mm, Condenser lens minimum working distance 12.5mm