Katwar village providing FHTC

Amount

Supply & Erection of Horizontal spindle split casing type pumping sets of minimum four (4) star rating duties directly coupled to AC squirrel cage induction type motor with 1440 RPM, 3 phase, 50 Hz and accessories as described in Schedule No. II complete in all respects with priming arrangement with complete base frame (A) Clear water pump set 600 LPM 40 Mtr. Head

Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricates from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900mm having following item (a) For clear water Pumpets for 600 LPM x 40 M Head = 2 Nos (a) Main Switch 63 Amp. 2 Nos (L&T Siemens, ABB), (b) Volt meter 100x100mm range 0 to 500 Volt 1 No. (AE/KAPPA/L&T) (c) Amp. Meter 100x100mm range 0 to 100 Amp. 2 Nos (AE/KAPPA//L&T) (d) CT 100/3 = Nos (AE/KAPPA/L&T) (e) VSS = 1 No. & ASS = 2 Nos. of approved make (f) SPP 2 No. of approved make (g) Motor starter, star delta 2 Nos for 600 LPM x 40 M Head Motor (L&T Simens AAB) (h) Capacitor of suitable capacity= 2 Nos (i) Indicating Lamp = One Set (j) Change over switch 63 AMp. 1 No.

Supply erection, testing of light fittings including wire in the pump chamber with material upto 10 points including switch, button, plug, PVC conduit pipe and copper wire etc. as per approved specifications complete in all respects

Supply, erection, testing of ISI marked copper wire for 4 Nos motors with under ground system in PVC and flexible pipes copper wire size 6 sq. mm complete in all respects with accessories like thimble etc. complete in all respects

Supply, erection, testing of ISI marked copper wire for 4 Nos pannel board from main switch to panel and wiring of panel with size 10 sq.mm (copper wire) ISI marked complete in all respects with accessories like thimble etc. complete in all respects

Providing and fixing of ½" mm GI elbow complete in all respect and the entire satisfication of Engineer-in-Charge (make Jindle/ Parkesh/Tata) complete in all respect

Providing and fixing of ½" mm GI socket complete in all respect and the entire satisfication of Engineer-in-Charge (make Jindle/ Parkesh/Tata) complete in all respect

Providing and fixing of 1/2” mm GI nipple complete in all respect and the entire satisfaction of Engineer-in-charge make (Jindal/ Parkesh/ Tata) complete in allrespect

Taking outtop layer and 2nd layer filter media from filter beds & Replacing the top layer filter media in filter beds after washing cleaning screening complete in all respect

Taking out filter media 3rd, 4th & bottom layer from filter beds and replacing the same in filter beds after washing cleaning screening complete in all respect

Taking out filter bed plates from Filter bed and replacing the same after washing cleaing screening complete in all respect

Bidder Name

Amount

MANDEEP SINGH(GSTN-NA)

Suresh Kumar Contractor(GSTN-NA)

RAJESH KUMAR CONT(GSTN-NA)

Kirpal Singh Contractor VPO Suchan Mandi Sirsa(GSTN-NA)

MANDEEP SINGH

RAJESH KUMAR CONT

Suresh Kumar Contractor

RAJESH KUMAR CONT

Kirpal Singh Contractor VPO Suchan Mandi Sirsa

Suresh Kumar Contractor