8120/SAR-24/E8 PROVN OF DEFICIENT TOILET AND BATHROOM AT SGT BLOCK AT SNCO MESS, RAILING IN SPORTS GROUND AND OBSTACLE TRAINING COURSE AT AF STATION SARSAWA

Amount

Surface excavation in soft/loose soil n exc 30cm depth and averaging 15cm depth including removal of soil n exc 1.5m deep and getting out in soft/loose soil complete all as specified and as directed.

Excavating in trenches,exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed.

M&L for Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and as directed.

M&L Hardcore (for plinth protection) of broken stone or boulders of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for spreading & levelling of earth in layers not exc 15 cm thick including water & well ramming as in floors complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded aggregate) 100mm thick in foundations filling and mass concrete complete all as directed.

M&L for PCC 1:2:4 type B-0 (12.50mm graded aggregate) 25mm thick as in sub floors complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (20mm graded aggregate) 100mm thick as in floors finished even and smooth including sealing joint with sealing compound (POLYURETHANE) complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 100mm thick as in foundations filling and mass concrete,sub base of floors using 40 mm graded aggregate) complete all as directed.

M&L PCC 1:3:6 type C-1 (20mm graded aggregate) 50mm thick as in plinth protection complete all as specified and as directed.

M&L for Brick work using fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 (compressive strength of bricks 100kg/cm^2) complete all as specified and as directed

M&L for 15mm thick cement plastering in cement mortar 1:4 on brick/concrete surface, finished even and even smooth (without using extra cement) complete all as specified.

M&L for 15mm thick cement plaster as in ceiling on fair faces of brick work or concrete surfaces in cement mortar 1:3 finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for 5mm thick cement plaster as in ceiling on fair faces of brick work or concrete surfaces in cement mortar 1:3 finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Mild steel bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed.

M&L for RCC M-25 Design Mix using 20mm graded stone aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves all as directed and specified.

Providing, cement concrete (1:2:4typeB-1) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Providing precast cement concrete louvres and jallies, 25mm thick (measured solid), including all mouldings complete all as specified and directed.

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified.

S&F for 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified.

S&F for 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts (16mm dia) and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

S&F for 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified.

S&F for 100mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified.

S&F for 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

M&L for Framed work as in doors or gates of angle 40x40x6mm or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

&F for 2nd class hardwood Glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified.

M&L for Plywood 12mm thick, grade BWR, type BB, fixed with screws to timber frame work complete all as specified

S&F for Stainless steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.

S&F for ordinary rat tail rod pattern springs (300mm) including roller and roller plate including welding to the chowkhat complete all as specified and as directedted.

M&L for preparation of new or previously untreated surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over one coat of pink primer on wood based surface complete all as specified.

Taking down of cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed

S&F for Galvanised steel tubes (medium grade) of 25mm dia with all fittings and fixed complete to walls and ceilings or laid in floors,complete all as specified and as directed.

All as per Serial Item No. 36 here- in-after above but for 20mm bore pipe –ditto-.complete all as specified and as directed.

All as per Serial Item No. 36 here- in-after above but for 15mm bore pipe –ditto-. complete all as specified and as directed.

S&F for Vitreous China Urinal, Half stall type, white with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.

S&F for PVC valveless, syphonic action type, flushing cistern 5 liter capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

S&F for Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed.

S&F for Vitreous china urinal partition white of size 310x700 mm complete all as specified and as directed.

S&F for Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms) complete all as specified and as directed.

Supply and fixed in repairs 32mm dia Waste fittings, brass, chromium plated for glazed ware basins,urinals etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F for PVC( SWR) pipe 100mm bore pipe any length with rubber ring jointer joint, laid in trenches or in floor complete all as specified and as directed

M&L for 100 mm thick Concrete bed to drain pipes in cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested for 100 mm bore pipe complete all as specified and as directed

S&F PVC( SWR) elbow for 100 mm bore pipe complete all as specified and as directed.

S&F PVC( SWR) socket for 100 mm bore pipe complete all as specified and as directed.

S&F for CI spun pipe 100 mm bore fixed to walls or laid in floors complete including jointing all as specified.

S&F for CI junction for 100mm bore CI pipe including jointing complete all as specified and as directed.

S & F of Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 Ltr hoisted and fixed in position complete all as specified and as directed.

S & F of Stop valves(15mm), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed as specified and directed.

S&F of Ball brass valves(25mm dia), high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F in repair 100 mm Dia Cast iron floor trap,with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specifed and as directed

S&F in repair 100 mm Dia Cast iron Nahani trap,with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specifed and as directed

M&L for glazed ceramic coloured tiles (plain color/printed/designer or combination of all) in vertical surface 300 x 200 x 7mm thick on vertical surface , skirting/dados etc over screed bed or bedding layer of mortor 10 mm thick in cement mortor 1:3 complete all as specified and directed.

S&F Coloured non skid ceramic tiles (plain color/printed/designer tiles, with or without border) 7 to 8mm thick (square/rectanglar) area of each tile exc 0.11 sqm but n exc 0.18 sqm ,in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match,laid over 15mm thick bedding layer of CM 1:4 complete all as specified and directed.

S&F in repair for vitreous china squatting pan 'orissa pattern' size: 580X 440mm white with integral foot rests (excl. flushing cistern & flush pipe) as in repair incl. connection to trap & to flushing pipe anti-syphonage pipe etc incl. maching good to floor complete all as specified and as directed.

S&F in repair vitreous china white wash hand basin flat back of size 550 x 400 mm including CI/MS brackets ,brass CP waste coupling & pipe all as directed .

S&F Pillar taps cast copper alloy (fancy type) with capstan head Chromium Plated screwed down, high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nut screwed for 15 mm bore pipe, complete all as specified and as directed

S&F Bib taps, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fixing of PVC flexible waste pipe , 32mm dia for washbasin and sink complete all as specified and directed.

S&F flexible PVC connection,nylon thread reinforced 15mm dia,450mm long with brass union at both ends for 15mm dia pipe complete all as specified and directed.

S&F PVC low level flushing cistern 10 liter capacity, white, with inlet, ball valve, flot and handle including PVC flush pipe 32 mm bore complete all as specified and as directed.

S&F overhead shower 100mm round (including leg) single flow with air effect (ABS body & face plate chromium plated ) with Rubit cleaning system including CP arm complete all as specified and directed.

Material & Labour for Preparation of new plastered surfaces of wall and applying two coat of cement base paint white or tinted complete all as specified and directed any tint complete all as specified and as directed.

M&L for applying three coats of white wash on walls on new plastered surfaces including preparation surfaces complete all as specified and directed

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and as directed

M&L for mild steel Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. complete all as directed and as specified.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and getting out soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for 2nd class hardwood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

M&L for 16mm dia neck Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 15cm and n exc 22.5cm long complete all as specified and directed.

M&L Band, straps,supports,staysfor rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers etc. have screwed, ends including keys, cotters, wedges, etc. for timber trusses and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Point wiring for light/fan point controlled by one switch using 1.5 Sq mm copper conductor PVC unsheathed cables (multistranded) in and including PVC surface conduit terminating in existing sunken box with all fitting and fixing materials for fixing of switches and sockets including supplying and laying PVC insulated unsheathed 1100 volts grade copper conductor 1.5 Sq mm earth wire stranded and connected to earth dolly all as specified. complete all as specified and as directed.

All as per ser item no 77 above but for 5 amp socket outlet point on the same board with other switches complete all as specified and as directed.

All as per ser item no 77 above but for 5 amp socket outlet point on the on independent board complete all as specified and as directed.

All as per ser item no 77 above but for but with cable of size 2.5 sqmm for one 5 pin 15 amps socket outlet on independent board and multistranded insulated copper earth continuity conductor of size 1.5 sqmm ass as specified and ditected by Engr-in-charge.

M & L for switch piano flush type 5 amps SP one way 230 volts complete all as specified and as directed.

M & L for switch socket combination 2 in 1, 5 amps flush type complete all as specified and as directed.

M & L for switch socket combination 2 in 1, 5 and 16 amps flush type universal complete all as specified and as directed.

M&L ceiling rose three terminals/PVC/polycarbonate,isolated body on PVC board complete all as specified and as directed.

S&F LED batten 20/22 complete watts 1200mm with aluminium extruded industrial fitting and aluminium heat sink, System Lumen Efficacy ≥110 Lm/W operating Voltage between 140-270Vac , Power Factor more than 0.90%, LED Driving Current < 70% of rated maximum forward current,THD less than 20%, CRI more than 80%, Luminaire intergal driver with 2KV surge protection, Over Load Protection, No Load Protection and BIS Marking (R no. for Driver), Driver Certiifcation IEC64347-2-13 IS(15885), Over all electrical efficency more than 90%, Driver electrical efficiency will be > 85% with 2 year warranty all as specified and directed.

S&F LED batten 10/12 watt, 600mm long with with aluminium extruded and aluminium heat sink, System Lumen Efficacy ≥100 Lm/W operating Voltage between 140-270Vac , Power Factor more than 0.90%, LED Driving Current < 70% of rated maximum forward current,THD less than 20%, CRI more than 80%, Luminaire intergal driver with 2KV surge protection, Over Load Protection, No Load Protection and BIS Marking (R no. for Driver), Driver Certiifcation IEC64347-2-13 IS(15885), Over all electrical efficency more than 90%, Driver electrical efficiency will be > 85% with 2 year warranty all as specified and directed. Make : Philips, Wipro, Osram complete all as specified and as directed.

S&F in replacement MCB DB, double door SPN 8 way 240 volts with 200 amps rated bus bar, fixed on PVC board complete all as directed at site complete all as specified and as directed.

S & F in replacement MCB single pole 5 to 32 Amps. Breaking Capicity 10 KA complete all as specified and as directed.

S&F Wiring for circuit/submain wiring alongwith earth wire with the 2x4.0 sq. mm + 1x2.5 sq. mm earth wire sizes of FR PVC insulated copper conductor, single core cable in existing surface/ recessed steel/PVC condu complete all as specified and as directed.

Supply & fix metal body exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and as directed.

Supply and fix Water heater storage type, electric,capacity 25 litres. BEE 5 star ratedincluding grouting the nuts, bolts, washers of adequate size PVC connection and all other accessories reqd at site for the effective functioning of the water heater complete all as specified and as directed.

RAJAN TRADERS

Laxmi Builders

M/s Inderlal

Gupta Enterprises

RAMAPATI ENGINEERING SERVICES