Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.3 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹34.0 L+₹56,565 (1.69%)Rejected-AOC | L2 | Rejected-AOC OTHER THAN LOWEST BIDDER |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
13 Nov 2021, 6:00 pmClosed
GE North Bikaner
GE North Bikaner
REPAIR TO SOFA SET 4 AND 5 SEATER AND ALL TYPE OF CUSHION CHAIR AND CHARPOY GI PIPE IP FOLDING BED HARD STEEL MAP AND DRDO FURNITURE AT MIL STN BIKANER UNDER GE NORTH BIKANER
2021_MES_482069_1
GE (N) BKN TOKEN NO 58/2021-2022
Open Tender
Miscellaneous Works
Item Rate
330 days
BIKANER
Class D category d i
8 documents required · 8 mandatory
₹500
GE North Bikaner
₹80,000
Yes
4 Jun 2022
16 Oct 2021
15 Nov 2021
16 Oct 2021
13 Nov 2021
30 Oct 2021
Amount
Sofa Set 4/5 Seats FD-373 (a) Replacement of seat and back cushion 100 mm thick made of cool foam (Make : Sleepwell/ kurlon ) of 32 density duly covered with well finished best quality tapestry cloth not less than Rs 250/- meter shade and quality shall be approved by Engr-in- charge/GE.
(b) Replacement of long, front and back rail made of well seasonedsheesham wood duly plained / smoothened after taking out the old unserviceable one of 3 seater chair.
(c) Replacement of long, front and back rail, rest all as per item No. 1(b) here in before but single seater.
(d) Replacement of short stiffeners well seasoned 1st quality sheesham wood all as specified in drawings after taking out the old existing unserviceable one of 3 seater /single seater
(e) Replacement of front legs of well seasoned Sheesham wood all as specified in drawings after taking out the old existing unserviceable of Sofa Chair 4/5 seater.
(f) Replacement of back legs of well seasoned Sheesham wood all as specified in drawings after taking out the old existing unserviceable of Sofa Chair 4/5 seater.
(g) Replacement of Arms well seasoned Sheesham wood all as specified in drawings after taking out the old existing unserviceable of Sofa Chair 4/5 seater.
(h) Polishing all new and old surface with two caots of french polish after preparation of old surface complete all as specified.
Chair dinning Cushioned /long back FD/E6/MAP/ 10 (R) (a) Replacement of seat cushioned 75 mm thick made of cool foam (Make : Sleepwell/ kurlon) of 32 density including ply wood 12mm thick suitable for seat duly covered with well finished best quality tapestry cloth not less than Rs 250/- meter shade and quality shall be approved by Engr-in- charge/GE.
(b) Replacement of front legs made of well seasoned sheesham wood duly plaine/smoothened after taking out the old unserviceable front legs
(c) Replacement of rear legs rest all as per item No. 2 (b) here in before
(d) Replacement of front and back rail well seasoned sheesham wood all as specified in drawings after taking out the old existing unserviceable rails
(e) Replacement of side rail well seasoned Sheesham wood all as specified in drawings after taking out the old existing unserviceable side rails.
(f) Replacement of back rest , side and middle stiffner well seasoned Sheesham wood all as specified in drawings after taking out the old existing unserviceable stiffners.
(g) S&F second class hard wood corner / bracket (L shape) of size 50mm x 50mm x 20mm thick fitted with screw between side rail to legs.
(h) Polishing all new and old surface with two caots of french polish after preparation of old surface complete all as specified.
Chair easy Cushioned FD-358 (a) Replacement of seat cushioned 75 mm thick made of cool foam (Make : Sleepwell/ kurlon ) of 32 density duly covered with well finished best quality tapestry cloth not less than Rs 250/- Per meter shade and quality shall be approved by Engr-in- charge/GE.
(b) Replacement of back cushioned 75 mm thick made of cool foam (Make : Sleepwell/ kurlon ) of 32 density duly covered with well finished best quality tapestry cloth not less than Rs 250/- per meter shade and quality shall be approved by Engr-in- charge/GE.
(c) Replacement of front legs made of well seasoned sheesham wood duly plained/smoothened after taking out the old unserviceablefront legs.
(d) Replacement of rear legs rest all as per item No. 3 (b) here in before
(e) Replacement of front and back rail well seasoned sheesham wood all as specified in drawings after taking out the old existing unserviceable rails.
(f) Replacement of side rail well seasoned Sheesham wood all as specified in drawings after taking out the old existing unserviceable side rails.
(g) Polishing all new and old surface with two caots of french polish after preparation of old surface complete all as specified.
Chair revolving / chair computer FD-E6/MAP/01/ TP (a) M & L Tapestry/Fabric cloth over sythetic foam 25mm thick (as approved) for seat of chair computer/chair revolving including taking out old worn out Tapestry/Fabric Cloth & Foam from chairs and seat 12mm hot pressed plywood complete all as specified and as directed by Engineer-in-Charge.
(b) M & L Tapestry/Fabric cloth over sythetic foam 25mm thick (as approved) for back of chair computer/chair revolving including taking out old worn out Tapestry/Fabric Cloth & Foam from chairs and back 12mm hot pressed plywood complete all as specified.
(c) M& L twin Castor Wheel (as approved) of chair computer/chair revolving including taking out unserviceable or broken Caster Wheel from Chairs, complete all as specified.
(d) M & L bottom base with steelness steel frame including twin castor wheel each chair five Nos (as approved) of chair executive medium back including taking out unserviceable bottom base with twin castor Wheel from Chairs, complete all as specified.
(e) M&L as lifting hydrolic system of chair computer/chair- revolving including taking out unserviceable Gas Lifting Hydrolic System from Chairs, complete all as specified.
(f) M&L handle soft foam of chair computer/chair visitor/chair revolving including taking out unserviceable handle from Chairs including welding of broken joins and painting of steel surface of the chair with one coat of synthetic enamel of black shade complete all as specified.
Chair writing/ chair visitor FD/MAP/E6/12 (a) S & F Tapestry/Fabric cloth over sythetic foam 25mm thick (as approved) for seat of chair writing/ chair visitor including taking out old worn out Tapestry / Fabric Cloth & Foam from chairs and seat 12mm hot pressed plywood complete all as specified and as directed by Engineer-in-Charge.
(b) S & F Tapestry/Fabric cloth over sythetic foam 25 mm thick (as approved) for back of chair writing/ chair visitor including taking out old worn out Tapestry/Fabric Cloth & Foam from chairs and seat 12mm hot pressed plywood complete all as specified.
(c) S & F handle soft foam of chair writing/ chair visitor including taking out unserviceable handle from Chair including welding of broken joints and painting of steel surface of the chair with one coat of synthetic enamel of black shade complete all as specified and as directed by Engineer-in-Charge. Note :- (i) Cost of minor repair like welding to frame if required etc is deemed to be included in the quoted rate. (ii) Cost of all type nut bolts and screws and painting of the chair to be included in the quoted rate.
Replacement of U/S ply top of Bed hard with steel frame FD/E6/MAP-08(R) (i) Removing of unserviceable ply wood from Bed hard with steel frame fixing the 12mm thick ply wood sheet on top suitable for Bed hard with steel frame as shown on drg of size 1980 x 900mm (BWR) as per IS-303 with mild steel galvanized iron nuts & bolts with GI washer (Heavy weight) and including electric welding of loose long rail short rail, legs centre stiffender, Head rest, Foot rest and cleat of MS pipe by continuous welding around the broken joints and also replacement of old unserviceable above parts with new parts where required and also including painting with one coat of synthetic enamel paint (Black) after preparation of old painted surfaces with provding 04 Nos new hard rubber shoes to each Bed hard with steel frame at the bottom of legs after removing of old shoes complete all as specified and as directed by Engineer-in-charge. Note :- (i) Cost of minor repair like welding to frame if required etc is deemed to be included in the quoted rate. (ii) Cost of all type nut bolts and washers, PVC shoes and painting of the Bed hard steel to be included in the quoted rate.
(ii) S & F of new head rest made of pre-laminated particle board 18mm thick both side teak face of exterior grade with 04mm thick teak wood beading shall be provided all-round including screws and welding of cleat all as specified in drawing directed by Eng-in-Charge.
(iii) S&F of new Foot rest made of pre-laminated particle board 18mm thick both side teak face of exterior grade with 04mm thick teak wood beading shall be provided all-round including screws and welding of cleat all as specified in drawing directed by Eng-in-Charge.
Charpoy Folding Steel FD-388 (R ) (a) Removing of old unserviceable plywood from charpoy folding and supply & fixing new 12 mm thick commercial plywood BWR grade in two pieces fixed with four nuts, bolts, washers of suitable size for each piece of plywood and provide support in between long rail of charpoy complete.
(b) S & F in replacement of unserviceable PVC shoe with new PVC shoe of best quality complete all as specified.
(c) Removing of old unserviceable parts of charpoy folding and supply and fixing the new with MS pipe of 25 mm bore with wall thickness 1.6mm by welding and including minor repair/welding complete and items srl No 7(a) to (c) all as specified as approved/directed by the Engineer-in-Charge.
Replacement of U/S ply top of Charpoy IP with new Hard top (Drg FD/MAP-II/01) (i) Removing of unserviceable plywood from Charpoy IP, Supply and fixing the 12 mm thick plywood sheet on top, suitable for Charpoy IP as shown on drg. of size 1980 x 900 mm (BWR) as per IS-303 with mild steel galvanized iron nuts & bolts of size 70mmx6mm with GI washer ( heavy weight) and including electric welding of loose long rail, short rail, legs, centre stiffener 25 x 25 mm square MS tube and cleat tube size of 25 x 60 mm x6 mm of MS pipe by continuous welding around the broken joints and also replacement of old unserviceable above parts with new parts where required and also including painting with one coat of synthetic enamel paint (Black) after preparation of old painted surface with providing four nos new hard rubber shoes to each charpoy IP at the bottom of legs after removing of old shoes complete all as specified and directed by GE/Engineer-in-Charge. Note :- (i) Cost of minor repair like welding to frame if required etc is deemed to be included in the quoted rate. (ii) Cost of all type nut bolts and washers, PVC shoes and painting of the charpoy IP to be included in the quoted rate.
Replacement of U/S ply top/ Nylon Newer of Charpoy GI Pipe with new Plywood top,FD-220 (i) Removing of unserviceable plywood/ Nylon Newar from Charpoy GI Pipe, tightening of loose check nuts, elbows, long rails. Short rails, legs (i.e., complete charpoy) and supply and fixing the 12 mm thick 7 ply, commercial type BWR, exterior grade (water proof), ISI-303 marked of size 1980 x 900 mm fixed on top of GI Charpoy as shown on drawing with mild steel galvanized iron nuts & bolts of size 70mmx6mm with GI washer ( heavy weight) and three stiffner made out of MS flat iron 35 x 5 mm parallel to short rail duly painted black will be welded between the long rail (All as approved by GE and directed by Engr -in- charge.
(ii) Removing of unserviceable long rail of charpoy GI Pipe and supply and fixing new long rail duly threading both side /welding properly made out of GI tubing 32 mm bore medium grade duly painted portion all as per sample available. Threading/welding of new rail as per best trade practice and as approved by GE. Make of GI Pipe :- Jindal/Prakash surya/ Tata/BST. Note :- Unit of measurement of this item is 'Each' which shall comprise of removing, supply and fixing of one long rail and all as specified.
(iii) Removing of unserviceable short rail of charpoy of GI Pipe and fixing of short rail made out of broken long rail obtained from Srl item No 3 (ii) above threading/welding of both ends of short rail as per best trade practice duly painted with aluminum paint of welding portion and directed by Engr-in-charge. Note :- Unit of measurement of this item is 'Each' which shall comprise of removing and fixing of one short rail and all as specified.
(iv) Removing of old unserviceable 3 way elbow 32mm bore and supplied and fixed in position new elbow ISI marked all as per sample available in BSO's Yard complete all as approved by GE and as directed by Engr-in-charge
(v) Removing of old unserviceable check nuts and supplied and fixed in position new check nuts to Charpoy GI Pipe all as per sample available in BSO's Yard complete all as approved by GE and as directed by Engr-in-charge
(vi) Removing of unserviceable leg of charpoy of GI Pipe and fixing of leg made out of broken short rail obtained from Srl item No 3 (iii) above welding of both ends of leg as per best trade practice duly painted with aluminum paint of welding portion and directed by Engr-in-charge. Note :- Unit of measurement of this item is 'Each' which shall comprise of removing and fixing of one leg and all as specified.
(vii) M & L for electric welding of long rails, short rails, legs of 32 mm bore GI tubing by continuous welding around the broken joints duly painted with aluminum paint of welding portion all as directed by Engr-in-charge. Note :- (i) Unit of measurement of this item is 'Each' which shall comprise of welding of each broken joint all as specified above/directed by Engr-in-charge. (ii) Welding rods shall be ISI marked.
Almirah steel Large 1980x910x480mm (a) S & F in replacement of unserviceable lock with new lock of 6 levers and ISI mark lock with double keys made of standard manufactures like Godrej or its equivalent. The cost of steel screws shall be deemed to be included in the quoted rates of this item.
(b) S & F in replacement of unserviceable MS cleat with new MS cleat to support shelf duly painted with two coats of synthetic enamel paint of olive green shade with nuts, bolts of suitable size including welding of broken shutter of almirah complete all as specified.
(c) S & F in replacement of unserviceable CP handle with new CP handle including nut, bolt & washer made of standard manufactures like Godrej or its equivalent. The cost of nut bolts and washers shall be deemed to be included in the quoted rates of this item.
(d) Painting to steel surface of the almirah one coated by spray gun with synthetic enamel paint after preparation of old painted surface complete all as specified and as directed by the Engineer-in-Charge .
Almirah steel Large 1980x910x500mm (a) S & F in replacement of unserviceable lock with new lock of 6 levers and ISI mark lock with double keys made of standard manufactures like Godrej or its equivalent. The cost of steel screws shall be deemed to be included in the quoted rates of this item.
(b) S & F in replacement of unserviceable MS cleat with new MS cleat to support shelf duly painted with two coats of synthetic enamel paint of olive green shade with nuts, bolts of suitable size including welding of broken shutter of almirah complete all as specified.
(c) S & F in replacement of unserviceable CP handle with new CP handle including nut, bolt & washer made of standard manufactures like Godrej or its equivalent. The cost of nut bolts and washers shall be deemed to be included in the quoted rates of this item.
(d) Painting to steel surface of the almirah one coated by spray gun with synthetic enamel paint after preparation of old painted surface complete all as specified and as directed by the Engineer-in-Charge .
Almirah steel 1266 x 760 x 430 mm 1/2 S & 1/2 H (a) S & F in replacement of unserviceable lock with new lock of 6 levers and ISI mark lock with double keys made of standard manufactures like Godrej or its equivalent.
(b) S & F in replacement of unserviceable CP handle with new CP handle including nut, bolt & washer made of standard manufactures like Godrej or its equivalent. The cost of nut bolts and washers shall be deemed to be included in the quoted rates of this item.
(c) Painting to steel surface of the almirah one coated by spray gun with synthetic enamel paint after preparation of old painted surface complete all as specified and as directed by the Engineer-in-Charge .
Chair executive medium back (a) S & F Tapestry/Fabric cloth over sythetic foam 25mm thick (as approved) for seat and back of Chair executive medium back including taking out old worn out Tapestry/Fabric Cloth and Foam from Chairs complete all as specified and as directed.
(b) M & L bottom base with steelness steel frame including twin castor wheel each chair five Nos (as approved) of chair executive medium back including taking out unserviceable bottom base with twin castor Wheel from Chairs, complete all as specified and as directed.
(c) M&L gas lifting hydrolic system of chair executive medium back including taking out unserviceable Gas Lifting Hydrolic System from Chairs, complete all as specified and as directed.
(d) M&L handle of chair executive medium back including taking out unserviceable handle from Chairs, complete all as specified and as directed.
Chair writing wooden (DRDO) S & F the following new parts after removing broken parts of well seasoned sheesham wood including tightening with screw and other members of the chair writing complete and all as specified and shwon on drg. (a) Fancy type rear leg of size as Shown on drg
(b) Fancy type front leg of size as Shown on drg
(c) Fancy type arms of size as Shown on drg
(d) Fancy type back rest of size as Shown on drg
(e) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.
Table Dinging 06 persons (DRDO) S & F the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. (a) Fancy type front and back long rail
(b) Fancy type short rail
(c) Fancy type legs
(d) Table Top new made of prelaminated MDF board with coffee colour both side of size 1800x900x18mm thick with 4 mm thick half round teak wood beading shall be provided all around
(e) S&F second class hard wood corner / bracket (L shape) of size 150 x 150 x 35 mm thick and fitted with screw between long rail to legs short rail to legs.
(f) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.
Table Dinging 04 persons S & F the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. (a) Fancy type front and back long rail
(b) Fancy type short rail
(c) Fancy type legs
(d) Table Top new made of prelaminated MDF board with coffee colour both side of size 1200x900x18mm thick with 4 mm thick half round teak wood beading shall be provided all around
(e) S&F second class hard wood corner / bracket (L shape) of size 150 x 150 x 35 mm thick and fitted with screw between long rail to legs short rail to legs.
(f) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.
Hard Bed 1950x930x325 mm Supply and fixing the following new parts after removing broken parts including tightening with screw other members of bed complete all as specified ans shwon on drg. (a) Top ply 12mm thick of size bed hard complete 1950 x 900 mm. (BWR) as per IS-303 (07 ply) of commercial general purpose.
(b) Long rail of shisham wood of size 100mm x 50mm x 1980mm.
(c) Fixing only shot rail after cutting to required length from old retrieved long rail.
(d) Ply wood 3mm thick teak faced to the direct vision of head rest and ply wood commercial 3 mm thick to other side including 4mm thick shisham wood edging all around.
(e) All as per srl No 17 (d) here-in-before but to foot rest.
(f) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.
Table Peg 450x450x400/450 mm Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. (a) Table Top new made of prelaminated MDF board with coffee colour both side of size 450x300x18mm thick with 4 mm thick half round teak wood beading shall be provided all around
(b) Front and back rail
(c) Short rail
(d) Legs square & round type
(e) Short/long stiffeners
(f) S&F second class hard wood corner / bracket (L shape) of size 50 x 50 x 20 mm thick and fitted with screw between long rail to legs short rail to legs.
(g) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.
Table Centre size of 1050x525x450 mm Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. (a) Table Top new made of prelaminated MDF board with coffee colour both side of size 1050x525x450 mm thick with 4 mm thick half round teak wood beading shall be provided all around
(b) Front and back rail
(c) Short rail
(d) Legs square & round type
(e) Short/long stiffeners
(f) S&F second class hard wood corner / bracket (L shape) of size 50 x 50 x 20 mm thick and fitted with screw between long rail to legs short rail to legs.
(g) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.
Sofa Set 5 Seater (one large peice three seater and two single seater) Removing of old tapestry cloth, hessian cloth from sofa set of three seater and provision of new tapestry cloth, hessian cloth, linning cloth including tightening of spring, replacement of old spring with new spring where required, cords, replacement of seat and back cushion 100 mm thick made of 100% foam 32 density and wooden parts replacement with new legs, rail, arms, stiffener where required and polishing of exposted surface complete all as specified and shown on drawings. Note:- (i) Seat and back cushioned 100 mm thick made of 100% foam. Make-Sleepwell/Kurlon of 32 density (ii) Tapestry cloth best quality not less than Rs 250/- per meter shade and quality shall be approved by Engineer-in-charge. (iii) The cost of steel screw, nails, polishing of wooden frame etc shall be deemed to be included in quoted rate of this item
Sofa Set Single Seater Removing of old tapestry cloth, hessian cloth from sofa set of three seater and provision of new tapestry cloth, hessian cloth, linning cloth including tightening of spring, replacement of old spring with new spring where required, cords, replacement of seat and back cushion 100 mm thick made of 100% foam 32 density and wooden parts replacement with new legs, rail, arms, stiffener where required and polishing of exposted surface complete all as specified and shown on drawings. Note:- (i) Seat and back cushioned 100 mm thick made of 100% foam. Make-Sleepwell/Kurlon of 32 density (ii) Tapestry cloth best quality not less than Rs 250/- per meter shade and quality shall be approved by Engineer-in-charge. (iii) The cost of steel screw, nails, polishing of wooden frame etc shall be deemed to be included in quoted rate of this item
Study Table 3’ x 2 ‘ (900 x 600 x750 mm) with drawer Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. (a) Table Top new made of prelaminated MDF board with coffee colour both side of size 900x600x18mm thick with 4 mm thick half round teak wood beading shall be provided all around
(b) Long rail
(c) Short rail
(d) Legs square & round type
(e) Short/long stiffeners
(f) S&F second class hard wood corner / bracket (L shape) of size 100 x 100 x 25 mm thick and fitted with screw between long rail to legs short rail to legs.
(g) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.
Chair dinning without arms cushioned size of 450x450x 900mm/Chair dining high back with cushioned size of 450x400x 900mm (a) Replacement of seat cushioned 75 mm thick made of cool foam (Make : Sleepwell/ kurlon) of 32 density including ply wood 12mm thick suitable for seat duly covered with well finished best quality tapestry cloth not less than Rs 250/- meter shade and quality shall be approved by Engr-in- charge/GE.
(b) Replacement of front legs made of well seasoned sheesham wood duly plaine/smoothened after taking out the old unserviceable front legs
(c) Replacement of rear legs rest all as per item No. 23 (b) here in before
(d) Replacement of front and back rail well seasoned sheesham wood all as specified in drawings after taking out the old existing unserviceable rails
(e) Replacement of side rail well seasoned Sheesham wood all as specified in drawings after taking out the old existing unserviceable side rails.
(f) Replacement of back rail stiffner , side and middle stiffner well seasoned Sheesham wood all as specified in drawings after taking out the old existing unserviceable stiffners.
(g) S&F second class hard wood corner / bracket (L shape) of size 50mm x 50mm x 20mm thick fitted with screw between side rail to legs.
(h) Polishing all new and old surface with two caots of french polish after preparation of old surface complete all as specified.
shekhar & company
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .