ELECTRICAL WORK

Amount

CORTAGE OF STOR ITEMS FROM ESC TRIPULA RAEBARELI TO DUMP SITE AND DUMP SITE TO WORK SITE ALONGWITH LOADING UNLOADING AND PROPER STACKING:-

8.5 Mtr long PCC Pole.

16/25/63/100/160/250 (11/04 KVA) T/F, as required.

Loose line material including ACSR/RABBIT/AB /XLPE CABLE/ weasel Conductor, Earth wire 7/14 SWG, Pin Insulators, Disc Insulatos, Top Channel, Stay Set, Disc Fitting 45/70 KN (T&C), Stay Clamp, 11KV F Clamp, D/P Clamp, V type Cross Arm, Disc Insulators, Stay Wire, SS Base Angle, Earthing Rod, Holding Clamp, T-Off Channel, LTMS Clamp for PCC Poles, G.I. Wire 6 SWG, Dropper Channel, Holding Clamp, F Clmp, LT Shackel Insulators, PVC Armed Cable (2X4mm).I/D & O/D cable Jointing kit. and other remaining items. As per required Estimate.

MET U O/D TYPE CT/PT 11 KV CTR 30/10/5 Amp.& MET.CUB. PILFERPROFF 11 KV CTR 15/5 Amp.

CT FOR 11 KVHT MECUB CTR 30/5 Amp.

ERRECTION & LABOUR CHARGES:-

Errection of PCC Pole including dragging with Fitting of all accessories as per RESPO Norms.

Grouting of PCC Pole with grouting materials including digging of Pole to pit side as per RESPO Norms.

Errection/Re-errection of double pole by 02 No.PCC Pole, then grouting of Pole with grouting materials including fitting of all accessories items, as per RESPO Norms.

Mounting /Installation of 25 KVA Transformer on double Pole with fitting of all required accessories as per RESPO norms, as required.

Mounting /Installation of O/D type CT/PT 11 KV/ CTR 15/5 Amp alongwith fitting of all required accessories. As per RESPO norns.

Mounting /Installation of CT FOR 11 KVHT MECUB CTR 30/5 Amp. alongwith fitting of all required accessories. As per RESPO norns.

Making/Fixing/Installation of Cable Box C/D 11 KV 3X70 by XLPE .

Digging of Pits, fixing nozzling & grouting of Stay Rod inclucing fitting of all accessories with grouting materials as per RESSPO Norms

Laying , stringing & sagging of HT Line by DOG/ACSR weasal / RABBITconductor including all associated work & making clearance of Road with Joint/jumpers & binding on insulators as required.

Laying , stringing & sagging of LT Line (1x16 +1.25 sq.mm) by ABC Conductor including all associated work & making clearance of Road with Joint/jumpers & binding on insulators as required.

Earthing of Pole as per RESPO norms.

Earthing of T/F body & neutral as per RESPO norms.

Fabrication of Line materials like "V" type X-arm/Top Channel/T off Channel/M.S. Channel/ M.S. Angle/Gaurding Angle and other misc work, as required,

Making/Installation of Metering System 11KV Pilfer Proof 11 KV CTR 15/5 Amp., Alongwith fitting of all required accessories.

The work for Earth excavation of new Plinth size 2.50X2.50X1.25 Mtr. for making outer wall of Plinth by 1st class brick work in Cement mortar of ratio1:6 of filling earth in Plinth and providing Ston ballast and fixing 02 No.90 Iballs Rail pieces (6.9 Mtr) of proper distance and then plastering the top and all side of plinth wall with cement Corse and sand in ratio 1:4 and then proper spraying of water alongwith All materials & Labour for Mounting of 250KVA T/Fs on Plinth.

Making/Fixing/Installation of Stay Insulators, Material Provided by Contractor

Making/Fixing/Installation of L.T. Shackel Insulators, Material Provided by Contractor

Making/Fixing/Tightening of Nuts & Bolt, Material Provided by Contractor

Making/Taping of Alluminium Tape, Material Provided by Contractor

Making/Fixing/Installation of PG Clamp, Material Provided by Contractor

Making/ing/Installation of G.I. Barbed Wire, Material Provided by Contractor

Making/Fixing/Installation of G.I. Pipe 6" Dia, Material Provided by Contractor

Making/Fixing of Danger Board, Material Provided by Contractor

Making/Fixing of Stone Pad, Material Provided by Contractor

M/S SUBHASH TRADERS

M/S Shiv Traders