ADDN/ALTN/IMPROVEMENT TO MESSES, SINGLE LIVING IN ACCN INCLUDING MISC BUILDINGS AND ALLIED WORKS AT AIR FORCE STATION JAISALMER

Amount

Dismantling of existing water proofing treatment,concrete works of any location up to existing Rcc slab by chiesling,drilling,scraping etc.complete all as specified and directed.

Taking down chowkhats or frame n exc 1.50 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exc 1.50 & n.exc. 4 sqm in each complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or any thickness, pointed in any mortor or any height in floors, aprons etc laid bedded & pointed in any mortar complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of reinforced cement concrete in any position/height not exceeding 15cm thickness (below or above ground level) and including removing debris/rubbish from the premises upto 500m from site complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections and fittings, including cleaning for refixing or removal from site complete all as specified and directed.

Taking up or down 20mm dia steel tubing and connections and fittings, including cleaning for refixing or removal from site complete all as specified and directed.

Taking up or down 25mm dia steel tubing and connections and fittings, including cleaning for refixing or removal from site complete all as specified and directed.

Dismantling existing water tanks of capacity upto including 1000 ltrs lowering from its position and removal from site, etc. complete all as specified and directed.

Taking down cement plaster of any description, on brick or stone or PCC block masonry walls/ceiling etc. including raking out joints, hacking for key, scrubbing down with water etc and including removing debris/rubbish from the premises upto 500m from site complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar or cement lime mortar complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for balcony railing, etc complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in any position/height not exceeding 15cm thickness (below or above ground level) and including removing debris/rubbish from the premises upto 500m outside the MoD land complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings sheeting, any gauge, thickness, including similar pattern roof covering, etc. complete all as specified and as directed.

Taking out old serviceable glass of any description, from old wooden or metal frames, or stone, concrete or brick surrounds, any thickness or size; hacking out old putty or removing beads etc, including making good breakages in taking out and handling removing to store or stacking for reuse complete all as specified and as directed.

Dismantling wall and ceiling boards ( fibre, pulp, insulation etc or insulation boards/ slabs/ blankets any thickness including cover filletts, etc. complete all as specified and as directed.

Excavating in trenches for hard dense, n exc 1.5m wide and n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out complete all as specified and directed.

Removing of excavated material n.exc 50 m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed.

Returning filling in including spreading levelling watering &well ramming in layers n.exc 25cm in hard/dence soil complete all as specified and directed.

Excavating in post holes or similar in soft/disintegrated rock each n exc 0.50 Cum getting out,returning filling in and ramming earth or broken rubble mixed with earth around in layer not exc 25cm watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

M&L for plain cemen t concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in Roof padding on roof for correction of slope, levelling coarse, roof kerbs of mud stops or similar works, etc complete all as specified and directed.

M&L for plain cemen t concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in bands, bed blocks, fixing hold fasts, filling of door frames, coping , benching, etc including required necessary formwork complete all as specified and directed.

M&L reinforced Cement concrete in 1:2:4 type B1 using 20mm graded aggregate as in chajjas, balcony, roof pojection, slab supported on wall and similar works, etc. complete all as specified and directed.

M&L for precast cement concrete solid block ( 1:3:6 ) type C-1 (using 20mm graded stone aggregate) exc 10cm in width as in block masonry built in CM 1:6, etc complete all as specified and directed.

M&L for cement concrete 1:3:6 type C2 (40 mm graded stone aggregate) 75mm thick in plinth protection and provided joints 10mm wide and full depth at 3m distance and every change of direction filled with sand and bituminious mix 1:3 complete all as specified and directed.

M&L for Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete all as specified and directed by Engineer-in-Charge.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base of flooring/hard standing finished even and fair surfaces.

M&L for 40 mm thick cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in floors and drain finishing the surface even and smooth with using extra cement complete all as specified and directed.

M&L for Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed in cement mortar 1:3 complete all as specified and directed.

M&L for cutting out cracks to V-section in existing roofs or terracing ,cleaning out ,wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.

M&L for 10mm thick cement screed in cement mortar 1:3, including finishing even and smooth with out using extra cement to receive roof treatment, mixed with liquid water proofing compound mixed as per manufacture instruction by weight of cement over cleaned roof surface, as in grading to RCC roof surface,complete all as specified and directed. Note - Water proofing compound shall be measured and paid separately.

Supply only Liquid water proofing compound, make as approved by GE complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:6 on stone masonry surfaces or other than of fair faces of brick or concrete surfaces, finished even and fair complete all as specified and directed.

M&L for 15mm thick rendering cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) surface finished even and smooth without using extra cement with water proofing compound @ 3% by weight of cement complete all as specified and directed. Note : Water proofing compound shall be measured and paid separately as supply only.

M&L for rendering 10mm thick on uneven faces of concrete surfaces in ceilings in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and directed.

M&L for Raking out joints/pointing to random rubble or polygonal rubble uncoursed or brought up to courses in walls, etc. complete all as specified and directed.

M&L for preparing new plaster surfaces and applying 1mm thick readymixed wall putty on entire surface of wall etc cutting and finishing with appropriate sand paper and applying two coat of oil bound distemper (White or tinted) over one coat of primer after smoothening of surfaces of wall complete all as specified and directed.

M&L for complete removal of old existing treatment, filling up undulation and applying 1 mm thick readymixed wall putty on entire surface of wall etc cutting and finishing with appropriate sand paper and applying two coat of oil bound distemper (White or tinted) over one coat of primer after smoothening of surfaces of wall complete all as specified and directed.

M&L for preparing new plaster surfaces and applying two coats of white wash on ceiling complete all as specified and directed.

M&L for complete removal of existing treatment on old treated ceiling surfaces and applying two coats of white wash on ceiling complete all as specified and directed.

M&L for prepariation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resitant primer on surfaces of walls any colour as approved by GE complete all as specified and directed.

M&L for prepariation of old surfaces by washing, rubbing down and stopping of painted surfaces and applying one coats of cement base paint (tinted) on surfaces of walls any colour as approved by GE complete all as specified and directed.

M&L for preperation of any decorated or unplastered surfaces by brooming down and steel wire brushing, scrapping, down smoke soot, and greasy spot etc, and applying two coats of exterior emulsion paint (Apex) on surfaces of walls any colour as approved by GE complete all as specified and directed.

M&L Two coat of synthetic enamel painting on new wooden surfaces exc 10cm width or girth over a one coat of pink primer including preparation complete all as specified and directed.

M&L for preparation of old painted wooden surface or wood based materials of any description, not otherwise described, over 10cms widths or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for preparation of old painted steel surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for water proofing roof treatment, consists of a five layered Atactic polypropylene modified polymeric membrane of minimum 3 mm thick and minimum weight not less than 3.0 Kg/sqm, reinforced with polyster non woven fabric matt (weight not less than 150 gm/sqm), laid with LPG torch forced application over roof surface, with a side & end overlaps of minimum 100 mm, with and including Bituminious primer @ 0.3 ltr per Sqm confirming to IS 3384-1986 on roof surfaces piror laying APP and a coat of bituminous aluminium primer @ 100 gm/Sqm on top, including sealing all joints by thermo fusion complete all as per manufacturer's instructions and as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over and including 15mm thick cement morter 1:6 screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for machine cut kota stone slabs 20-25mm thick as in skirting/dado over and including 10mm thick cement morter 1:4 rendering laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L Vitrified Ceramic tiles light shade 9 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. over and including 15mm thick screed bedding in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L glazed ceramic non skid joint free coloured tiles (1st quality/premium quality) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exc. 0.38 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm in floors etc over and including 15mm thick screed bedding in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

M&L for (300mm x450mm) x 6 to 7mm thick coloured glazed ceramic tiles as in skirting/dado, etc. over and including 15mm thick bedding layer in CM 1:4 set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including cement screed bed 15mm thick in CM 1:6 laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete necessary cutting, notching etc for WHB complete all as specified and directed.

M&L for Rounding to edges of stone slabs one edge such as in steps,cooking platform, window cill and other similer situations complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends as binding with and including mild steel wire (Annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.

M&L for use and waste of fair finished flat form work to soffits of suspended slabs such as roof slabs, floor slabs, cooking plateform and similar work not exc. 200 mm thick complete all as specified and directed.

M&L for use and waste of rough finished form work to edge of concrete slabs, breaks in floors, etc. exc 5cm but not exc. 20cm wide complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, with glazing bars, dovetailed including one shop coat of zinc chromate primer complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, without glazing bars, dovetailed including one shop coat of zinc chromate primer complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame/shutter work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including roller for sliding window, handle, locking device, necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and complete all as specified and as directed.

S&F expanded metal mesh Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and complete all as specified and as directed.

S&F 5.0mm thick Figured glass and fixed to aluminium Ventilation in square exc 0.5 sqm in each pane complete all as specified and as directed.

S&F Stainless steel (Grade SS-304) wire cloth 0.36mm nominal dia of wire and average width of aperture1.4mm and fixed with stainless steel wire staple fixed with aluminium beading etc complete all as specified and as directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing etc complete all as specified and as directed.

S&F 2nd class hard wood plain, framed , paneled shutters 35mm thick (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (part-I) , kiln seasoned and chemically pressure treated etc complete all as specified and as directed.

S&F 2nd class Hard wood glazed/skeleton shutters 35mm thick (Double leaf) open rebated prepared to receive glass, gauze etc devided in squares with plain, chamfered or rounded, mitred and rebated sash bars any number with plain, chamfered or rounded, mitred and rebated beads for securing glass gauze etc. complete all as specified and as directed.

S&F factory made solid PVC door frame of size 50x47mm made out of 5mm thick rigid PVC foam sheet reinforced with MS square tube complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement and fixing in the frame at side complete all as specified and as directed.

S&F 100mm long Butt hinges, extruded stainless steel hinge pin anodisedand fixed type B-21 complete all as specified and as directed.

S&F 200 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F aluminum anodized handle cast type 150mm size complete all as specified and as directed.

S&F 300MM Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) & fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F 300 mm MS long ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F MS hold fasts and similar small articles conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

S&F in reapir curtain rod /rail with drapery rod stainless steel fancy type 25 mm dia including bracket, etc. complete all as specified and directed.

Relaying/refixing of old steel tubing 20mm bore including connections in new or old position including cleaning, necessary cutting, threading with necessary fittings like tees, elbows, sockets, reducers, bends etc compete all as specified and directed.

Relaying/refixing of old steel tubing 25mm bore including connections in new or old position including cleaning, necessary cutting, threading with necessary fittings like tees, elbows, sockets, reducers, bends etc compete all as specified and directed.

S&F galvanised steel tubing 15mm bore (ISI) marked medium grade with necessary fittings lie tees, elbows, sockets, reducers, bends etc including necessary cutting, threading laid in trenches/floors, fixed to walls(concealed) etc complete all as specified and directed.

S&F galvanised steel tubing 20mm bore (ISI) marked medium grade with necessary fittings lie tees, elbows, sockets, reducers, bends etc including necessary cutting, threading laid in trenches/floors, fixed to walls(concealed) etc complete all as specified and directed.

S&F galvanised steel tubing 25mm bore (ISI) marked medium grade with necessary fittings lie tees, elbows, sockets, reducers, bends etc including necessary cutting, threading laid in trenches/floors, fixed to walls(concealed) etc complete all as specified and directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in Brick/stone wall complete all as specified and directed.

S & F in repair 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed complete all as specified and directed.

S & F 25 in repair mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed complete all as specified and directed.

S&F of 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), Tripple layered, ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including 20mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repair water closet vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rest front/back inlet (excluding flushing cistern and flush pipe) including provision of cement concrete bedding in PCC (1:5:10) type E2 and making good to disturb surface complete all as specified and as directed.

S&F repairs Vitreous china wash down water closet pan (pedestal pattern) with any type of 'P' or 'S' trap excluding flushing cistern and flush pipe, including fixing of water closet complete with plastic water closet seat black/white closed pattern witrh flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repairs Vitreous China wash basin, wliile, flat back, size 580x450mm excluding taps, waste, chain and plug and porcelain stopper but fixing on counter top slab including waste fitting, brass chromium plated 32 mm size with long screwed shucks and fly nuts and including PVC discharge pipe complete all as specified and as directed.

S&F in repairs vitreous china full stall urinal White complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flishing cistern with brackets, flush pipe, grating and union for discharge pipe(exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.

S&F in repair PVC 10 Ltrs valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with flush pipe etc. ISI approved complete all specified and directed.

S&F in repair 15 mm bore fancy type chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repair 15 mm bore Brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed (JAQUAR,Model No CON- 169KNB)or equivalent complete all as specified and as directed.

S&F in repair fancy type chromium plated 15 mm bore angle cock, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repair PVC connections suitable for 15 mm dia pipe with PTMT nut of length 600 mm complete all as specified and as directed.

S&F in Repair hand shower (health faucet) (ABs body) with 8mm dia one meter long flexible tube in chrome finish incl wall hook & wall work incl fixing compl (Make : JAQUAR, Model No ALD-CHR-585)or equivalent complete all as specified and as directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12cm wide with fixing chromium plated bracket, guard and railing 55/56cm long complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail, 20mm dia., D-Type, 60cm long between flanges complete all as specified and as directed.

M&L for cutting holes into or through brick/stone walls built in cement mortar (nexc 400mm thick), superficial area exc 400 Sqcm nexc 0.10 Sqm and making good in cement mortar 1:3 or PCC 1:2:4: type B-1 as required complete all as specified and as directed.

S&F in repair PVC (SWR) floor trap of 75 mm outlet plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repair PVC (SWR) 110 mm dia pipes single socketed in any length with rubber ring joints laid in trenches/floor or fixed to walls including digging and making good as existing complete all as specified and as directed.

S&F in repair 110mm dia PVC (SWR) bend any radius with access door complete all as specified and as directed.

S&F in repair 110 mm PVC (SWR) Junction single (Single T) equal or unequal with access door complete all as specified and as directed.

S&F in repair 110mm dia PVC (SWR) vent cowl complete all as specified and as directed.

S&F in repair PVC (SWR) 75 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to walls including digging and making good as existing complete all as specified and as directed.

S&F in repair 75 mm PVC (SWR) Junction single (Single T) equal or unequal with access door complete all as specified and as directed.

S&F in repair 75mm dia PVC (SWR) bend any radius complete all as specified and as directed.

S&F in repair 75mm dia PVC (SWR) bend any radius with access door complete all as specified and as directed.

S&F in Repair Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays.including bolts and nuts and securing ends of stays to wall or roof in dia 110mm pipe complete all as specified and as directed.

S&F in Repair Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays.including bolts and nuts and securing ends of stays to wall or roof in dia 75 mm pipe complete all as specified and as directed.

M&L for salt glazed stone ware gully trap size 150x150mm, square,type 'P' including setting and jointing to drains with cement mortar 1:1 and CI grating including demolition of existing traps complete all as specified and directed.

M&L for framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290 Gde-E-165 complete all as specified and as directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm fixed to steel windows/wooden doors fixed with GI wire staples all as specified and directed.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed self tapping screws complete all as specified and directed.

S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre. size of grid 605 mm x 605mm complete all as specified and directed.

S&F Providing and fixing Gypsum Board 12mm thick in wall fixed with screw as per manufacturers instructions (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed.

S&F 18 mm thick Rajshree Celuka ply of grade 1 quality of one side pre-laminated and other side plain white colour to make kitchen cabinet/drawer shutters complete all as specified and directed.

S&F in repairs 75 mm long stainless steel hinges type B-12 complete all as specified and directed.

S&F in repairs 50 mm long stainless steel hinges type B-12 complete all as specified and directed.

S&F in repairs Stainless steel 40mm dia decorative knob for kitchen cup board complete all as specified and directed.

S&F in reapirs Brass magnet catcher suitable for CB/cabinet shutter complete all as specified and directed.

S&F in repairs Floor door stopper 150 mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repairs Mortice lock brass, vertical type, size 100mm 4 lever for alluminium door complete all as specified and directed.

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

M&L in reapir12mm thick plain/froasted toughened glass door including stainless steel door handle 300mm long decorative type incl all necessary connected fittings and fixtures for door complete all as specified and directed.

S&F in repairs Urinal spreader of CP for fixing with 15 mm dia pipe ( minimum weight 60 gms) fixed in repair complete all as specified and directed.

S&F of rolled mild steel in roof trusses, (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee,angle,channel or flat sections) including distance pieces, cleats incl dismantling etc conforming to Fe-410-W Gde E-250 quality 'A' complete all as specified and directed.

S&F of Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long (removing old hangers) complete all as specified and directed.

M&L for 6 to 9mm thick 595 x 595 mm eco board classic as in false ceiling complete all as specified and directed.

M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed.

M&L for Stone railing having one side carving of approved design and pattern (Jali pattern) suitable for flat surfaces containing 30-40cm wide, 10cm thick base stone fixed to levelled surface fixed in cement and sand mortar 1:3 after dismantling of existing railing of any description, size and demolition of existing surface for resting base stone and make good surface with neat cement, making suitable size holes in base stone to receive railing posts (post girth upto 40cm) at 0.90-1.20 centre to centre, post shall have cutting to inner sides to take stone railing of 5.0cm thick and required length and height (upto 0.80m) making all holes fixed with coloured cement, chemical to match the colour of railing, washing of complete prepared railing with mixture of water and acid followed by coloured cement polishing to match the natural texture of stone all as specified and directed. Note: (i) Measurement will be taken from top of base stone to bottom of newel cap and gross measurement with post will be taken for all carving areas for payment purpose. (ii) Rates are included base stone, newel post, stone railing with all suitable fixing arrangements in position as directed. (iii) Sketch-'B' for required design enclosed in Appendix 'E' to particular specifications for reference. (iv) Design and colour of stone shown on sketch for reference only. The same shall be approved by GE before execution of work/order by contractor.

M&L for Stone railing approved design and pattern suitable for flat/slant surfaces as in steps/staircase containing 30-40cm wide, including 10cm thick base stone fixed to levelled surface fixed in cement and sand mortar 1:3 after dismantling of existing railing of any description, size and demolition of existing surface for resting base stone and make good surface with neat cement, making suitable size holes in base stone to receive railing posts (post girth upto 40cm) at 25-30cm centre to centre, confined by top hand rails of same stone, hand rail to be fixed with large posts (Newel) at top and bottom (landings) of girth upto 60cm and height upto 1.4m, intermediate posts of hight (upto 1.0m) to be fixed between base stone and hand rail making all holes fixed with coloured cement, chemical to match the colour of railing, washing of complete prepared railing with mixture of water and acid followed by coloured cement polishing to match the natural texture of stone incl demolition of extg stone railing all as specified and directed. Note: (i) Measurement will be taken along sloped length for payment Purpose. (ii) Rates are included base stone, newel post, stone railing with all suitable fixing arrangements in position as directed. (iii) Sketch-'C' for required design enclosed in Appendix 'E' to particular specifications for reference. (iv) Design and colour of stone shown on sketch for reference only. The same shall be approved by GE before execution of work/order by contractor.

M&L for Stone Jharokha (Tibari) having size (2.8mx2.1m) opening of approved design and pattern suitable for fixing in existing stone wall containing three opening of designer arch having 125mm thick x375mm width of posts and 75mm thickness of arch stone including porjection of stone chajjas and all front/side face should be designer carving on stone to be fixed between wall with coloured cement, chemical to match the colour of stone, washing of complete prepared Jhorakha with mixture of water and acid followed by coloured cement polishing to match the natural texture of stone incl demolition of extg alluminium fixed portion all as specified and directed. Note: (i) Measurement will be taken as a whole in each for payment Purpose. (ii) Rates are included base stone (Dasa), Post (Satch), Takia, Margol, Chajjas, Kangra And Chap with all suitable fittings arrangements in position as directed. (iii) Sketch-'A' for required design enclosed in Appendix 'E' to particular specifications for reference. (iv) Design and colour of stone shown on sketch for reference only. The same shall be approved by GE before execution of work/order by contractor.

M&L for Stone border designer (Bajrangi Ghat Pattern) having carving on front face to be fixed all around the main entrance gate at edge of opening width of stone border should be not less than 300mm . Thickness of stone should be minimum 50 mm fixing arranement should cater properly with fastner and adhesive as directed by Engr-in-Charge. All joints to be fixed with CM 1:3 and all holes should be filled with coloured cement/ chemical to match the stone colour washing of complete prepared with mixture of water and acid followed by coloured cement polishing to match the natural texture of stone incl demolition of extg stone fixed portion all as specified and directed. Note: (i) Measurement will be taken as length x width for payment Purpose. (ii) Rates are included designer stone patti Bajrangi Ghat Pattern with all suitable fixing arrangements in position as directed. (iii) Design and colour of stone shall be approved by GE before execution of work/order by contractor.

M&L for Stone wall cladding with jaisalmer yellow stone having minimium 18mm thickness including outer face properly polished and fixed on wall with fastner and adhesive with CM 1:3 and all holes should be filled with coloured cement/ chemical to match the stone colour washing of complete prepared with mixture of water and acid followed by coloured cement polishing to match the natural texture of stone incl demolition of extg stone fixed portion all as specified and directed. Note: (i) Measurement will be taken as length x width for payment Purpose. (ii) Rates are included Stone wall cladding with all suitable fixing arrangements in position as directed. (iii) Design and colour of stone shall be approved by GE before execution of work/order by contractor.

Taking down carefully aluminium point wiring on wooden battens/through conduit (light fan, socket or power) complete with fittings such as switches, wooden batten, ceiling roses, pendants, regulators, box type tube light fittings, removing the materials from site except fittings etc which shall be reused in the work and making good the disturbed surfaces of walls/ceiling/ floors etc complete all as specified and as directed.

Taking down carefully unserviceable MCCB's/MCB's of any type any capacity complete all as specified and as directed.

Taking down carefully unserviceable distribution board any type any capacity complete all as specified and as directed.

Takling down and Hanging/re-fixing only of geysers after collection from MES Store yard including necessary fasteners complete all as specified and directed.

Taking down carefully unserviceable submain wiring any type any rating complete all as specified and as directed.

M&L for point wiring for controlled by one switch with PVC insulated but unsheathed single core FRLSH multistranded copper conductor cable IS-694 marked of size 1.5 Sqmm (nominal area) in and including non metallic rigid PVC conduit 20 mm dia by cutting chases in walls by cutter and making good the surface in CM 1:3 and to the original specification and PVC conduit on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling with including one run of PVC insulated FRLS copper conductor cable of 1.5 Sqmm with green insulation as earth wire and connected to earth dolly including sunken box of size 1.6mm thick and 60 mm depth presse ssteel box factory made for mounting of switch, socket and fan regulator with modular frame covers, complete all as specified and directed.

One light point controlled by one, one way switch

One fan point controlled by one, one way switch

One socket outlet 3 Pin, 6 Amp on independent board

One socket outlet 3 Pin, 6 Amp on same board.

M&L for point wiring for controlled by one switch with PVC unsheathed single core multistranded copper conductor cable of size 4 Sqmm (nominal area) in and including PVC conduit 20 mm dia by cutting chases in walls by cutter and making good the surface in CM 1:3 and to the original specification and PVC conduit on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling including one run of PVC insulated FRLS copper conductor cable of 4 Sqmm with green insulation as earth dolly for 6 pin, 16 Amp socket outlet on Independent board complete all as specified and directed.

S&F switch piano flush type single pole one way 5 Amp (ISI Marked) complete all as specified and directed.

S&F switch piano flush type single pole one way 15 Amp (ISI Marked) complete all as specified and directed.

S&F socket out let 2 in 1, 3 pin 5 Amp flush type (ISI Marked) complete all as specified and directed.

S&F socket out let 2 in 1, 3 pin 15 Amp flush type (ISI Marked ) complete all as specified and directed.

S&F Electronic fan regulator 230 volts , step type,socket type ,hum free 120 watt ISI Marked,including taking down unserviceable complete all as specified and directed.

S&F ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body (ISI Marked) complete all as specified and directed.

S&F Modular switch 6 Amp 250 V AC one way one module Cat part No 573450 of Legrand (Arteor) or equivalent make as approved by GE complete all as specified and directed.

S&F Modular switch 20 Amp 250 V AC one way with indicator one module Cat part No 572063 of Legrand (Arteor) or equivalent make as approved by GE complete all as specified and directed.

S&F Modular Socket, 6A - 2/3 pin combined 2 module cat Part No 573470 of Legrand (Arteor) or equivalent make as approved by GE complete all as specified and directed.

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module cat part No 573471 of Legrand (Arteor) or equivalent make as approved by GE complete all as specified and directed.

S&F modular Fan regulator step type, 120W - 2 module cat part No 573463 of Legrand (Arteor) or equivalent make as approved by GE complete all as specified and directed.

S&F white colour modular blanking plate, one module i complete all as specified and directed.cat part No 573649 of Legrand (Arteor) or equivalent make as approved by GE complete all as specified and directed.

S&F 10 watt LED Bulk head fitting in engineering plastic housing with clear prismatic diffuser including LED 10 watt complete with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 complete all as specified and directed.

M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLSH wire 6.00 Sq mm 1100 volts grade including and 6.00 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in rigid PVC conduit 25mm bore complete all as specified and directed. Note : Two run of 6.0 Sqmm cable and one run of 6.0 Sqmm cable as earth continuity conductor and 25mm rigid PVC conduit shall be measured and paid as one unit.

M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLSH wire 4.00 Sq mm 1100 volts grade including and 4.00 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in rigid PVC conduit 25mm bore complete all as specified and directed. Note : Two run of 4.0 Sqmm cable and one run of 5.0 Sqmm cable as earth continuity conductor and 25mm rigid PVC conduit shall be measured and paid as one unit.

M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLSH wire 2.50 Sq mm 1100 volts grade including and 2.50 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in rigid PVC conduit 25mm bore complete all as specified and directed. Note : Two run of 2.50 Sqmm cable and one run of 2.50 Sqmm cable as earth continuity conductor and 25 mm PVC conduit shall be measured & paid as one unit.

S&F MCB, 6 to 32 Amp, SP, 240 Volt complete all as specified and directed.

S&F MCB, 32 Amp, SPN, 240 Volt complete all as specified and directed.

S&F MCCB 100 Amps FP, 415 Volt 25 KA adjustable thermal & fixed magnetic setting Ics = 100% = 01 No

S&F MCB FP, 63 Amp complete all as specified and directed.

S&F surface and wall mounted LED tube light fittings of cap 10W , Two feet Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver with all as specified and directed.

S&F surface and wall mounted LED tube light fittings of cap 20W , four feet Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver with all as specified and directed.

S&F prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated copper bus bar 240 Volts TPN DB 08 way including taking down of existing complete all as directed.

S&F prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated copper bus bar 240 Volts 12 way (2 + 10 way) single pole and neutral including taking down of existing complete all as directed.

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed.

(i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I. (ii) Quoted rate of Item includes the cost of 7.50m GI pipe for protection of earth wire/strip Any variation in length shall be adjusted through deviation order. (iii) Quoted rate of Item includes cost of 7.50m earth lead wire/strip. Any variation in length shall be adjusted through deviation order. (iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.

S&F exhaust fan, steel body AC single Phase. 230V of size 450 mm sweep heavy duty sweep with, blades, and frame and metal louvers, nuts and bolts, etc. complete as specified and directed.

S&F Sheet Metal enclosure for VTPN DBs, 4 Ways, Double Door(IP-43), built- in bus bars complete suitable for 415 Volts, AC, 50 Hz supply, suitable for incoming MCCB and outgoing MCBs and fixed in recess in brick masonary wall complete all as specified and directed.

Taking down carefully ceiling fan 230 volts single phase 50 Hz from the position after dismantling fan blades of any sweeps and carrying out complete servicing with and including cleaning, greasing, replacing flexible 3 core cable of size 1.5 Sqmm with copper conductor from ceiling rose to fan, replacing rubber reel, split pins, check nuts, PVC connector complete with and including painting with 2 coats of synthetic enamelled paint over a coat of red oxide anticorrosive primer after rubbing entire fan body and blades and fixing back the fan in position complete all as specified and directed.

S&F 08 watt spot light Recess Mounting made out of Thermally conductive engineering plastic finished in white color having inbuilt driver, high transculent frosted optically diffuser, glare free light, IP-20, ( As per Site Requirment ) including connecting up with twin core twisted flexible copper conductor cable with suitable size including disconnecting & taking down old unserviceable light complete all as specified and directed.

S&F 18 Watt LED Downlighter Recess Mounting made out of Thermally conductive engineering plastic finished in white color having inbuilt driver , high transculent frosted optically diffuser, glare free light, IP-20, Square / Round Shape and White/Warm white Color ( As per Site Requirment ) having lumen output of 1800 Lumens ( in CDL/ Cool White Colour ) ) including connecting up with twin core twisted flexible copper conductor cable with suitable size including disconnecting & taking down old unserviceable light complete all as specified and directed.

S&F LED Street Light of Capacity 30 Watt With inbuilt Driver having Pressure die cast Aluminium housing, IP-66 Having Efficiency of ≥ 100 Lumens/Watt, Operating voltage – 120 – 270 Volts, P.F ≥ 0.95, T.H.D < 10 % , Suitable for 30 to 40 mm O.D Mounting Pipe and Suitable for mounting on Wall / Pole With Necessary Mounting arrangements ) including connecting up with three core twisted flexible copper conductor cable with suitable size, Mounting Pipe/Bracket, Nut,Bolts and Accessories including disconnected & taking down old unserviceable light complete all as specified and directed.

S&F exhaust fan, steel body,AC single phase 230V of size 300mm sweep with blades and frames and metal louvers, nuts and bolts including making holes in to the wall as per fan size and making good the disturved surfaces all as directed.

S&F in repair single pole and neutral enclosure 2 module in sheet steel with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 10 KA complete all as specified and directed.

Taking down old unserviceable fitting and Supply and fixing cygnus series Recess mounting LED 40 watt 2' x 2' LED Slim Panel - 595x595 mm cat Part No CCR-126-50-40-SL-NWH of make- CG electric or equivalent as approved by GE, white powder coated aluminium extruded housing with LEDs including LED driver and fixing in recess ceiling suitable size of aluminium strip size as required for fixing of LED fitting complete with all accessories prewired fixed on ceiling and connecting up complete with 3 core flexible cable of size 23/0.0076 complete all as specified and directed.

Paliwal Construction Company