COMPREHENSIVE PETTY REPAIRS TO CERTAIN BLDG INCL PLASTERING FLOORING TILES BRICK WORK ROOFING AND OTHER CONNECTED BR WORK AND JOINARY WORKS IN UNDER AGE BR I UNDER GE NORTH AT MIL STN BIKANER

Amount

Demolition of brick work built in cement mortar complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement conc. In ground floor and paving not exc. 15cm thickness (below or above GL) incl any type of floor finishes/topping complete all as specified and as directed by Engineer-in-Charge.

Demolition of reinforced cement conc.as in chhajas, parapets etc. not exc. 15cm thickness complete all as specified and as directed by Engineer-in-Charge.

Dismanting floor, hearth or wall tiling including cement mortar bedding and removal of rubbish out of the premises complete all as specified and as directed by Engineer-in-Charge.

Demolition of lime conc. of any desc.and in any position not other wise specially provided for complete all as specified and as directed by Engineer-in-Charge.

Dismantling Asbestos cement Corrugated sheets in roof covering complete all as specified and as directed by Engineer-in-Charge.

Dismantling plain or corrugated steel / transulecent sheeting any gaugr pattern thickness incl nanital or similar pattern complete all as specified and as directed by Engineer-in-Charge.

Dismantling one way Jaffri including taking as under of battens in trellis all as directded and as specified by Engineer in charge

Taking down cement plaster (any thickness and incl tiles if any) on brick or stone walls incl.raking out joints hacking for key scrubbing down with water complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhats or frames not exc. 1.50sqm each but with shutter (w/o taking of shutter from the frame ) including Windows /ventilators complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhats or frames exc. 1.50sqm and not exc 4 Sqm each but with shutter (w/o taking of shutter from the frame ) complete all as specified and as directed by Engineer-in-Charge.

Taking down door shutter of any desc exc 1 sqm but not exc 2 sqm and refixing in the same opening complete all as specified and as directed by Engineer-in-Charge.

Taking down door shutter of any desc exc 1 sqm but not exc 2 sqm and romoving to store complete all as specified and as directed by Engineer-in-Charge.

Taking down door shutter of any desc exc 2 sqm and romoving to store complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters of any description (Aluminum ) and refixing in same opening after carrying out necessary repairs , securing rails ,tightening scews ,hinges complete all as specified and as directed by Engineer-in-Charge.

Taking down Aluminium door including chowkhat if required and repair the same including repair of rubber bedding , aluminium clip, adjustment of glass repair of floor spring or hydraulic door closer with oiling or greesing etc including adjusment of horizontal or middle style.complete all till the staisfaction of engineer-in-charge

Taking down aluminum windows including frame if required and repair the same including repair of rubber bidding,aluminum clip,adjusment of glasses,repair of floor spring or hydraulic door closer with oiling or greesing etc.ajusment of horizontal, vertical or middle style . complete all as till the satisfaction of Engr-in-charge.

Dismantling of existing false ceiling boards (fiber,pulp,insulation, etc.) complete all as specified and as directed by Engineer-in-Charge.

Demolition of existing false ceiling complete incuding fillets, grid complete all as specified and as directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness size quality or desc.)from wooden frames or stone conc. Or brick surroundsglazed with putty or fixed with beads exc.105sqm complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel water tubing 15mm dia and connection ,incl cleaning for refixing complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel water tubing 20mm dia and connection ,incl cleaning for refixing complete all as specified and as directed by Engineer-in-Charge.

Dismantling Rotational Moulded plyethyelene water strogr tank of capacity exc 250 lit but not exc 500 lit complete all as specified and as directed by Engineer-in-Charge.

Dismantling Rotational Moulded plyethyelene water strogr tank of capacity exc 500 lit but not exc 1000 lit complete all as specified and as directed by Engineer-in-Charge.

Dismantling structural steel work including doors,gates but excluding framed trusses complete.

M&L for RCC pillarrs moulded 100 x 100mm x 75cm long complete all as specified and as directed by Engineer-in-Charge.

Providing cement concrete RCC jalli 35mm thick type B0 1:2:4 using 12.5mm graded aggregate (measured solid) including all mouldings but exc frame complete all as specified and as directed by Engineer-in-Charge.

M & L for Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

M & L Brick work with sub class B bricks straight or curved on plan to any radius in half brick walls built in CM 1:4 parapet complete all as specified and as directed by Engineer-in-Charge.

M&L brick work with fly ash bricks straight or curved on plan to any radius built in CM 1:4 all as specified.

M&L for cutting to existing flooring (Kota/Mosiac/stone flooring ) with and including polishing repaing complete all as specified and as directed by Engineer-in-Charge.

Rendering 15mm thick on fair faces of brick or conc. Surfaces in cement mortar 1:6,even and smooth w/o using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for 15mm thick rendering on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:4. (Note: Plaster shall be carried out in patches and contractor shall have no claim for any height and scaffolding what so ever is the location) complete all as specified and as directed by Engineer-in-Charge.

Rendering 5 mm thick on fair faces of conc. Surfaces in cement mortar 1:3,even and smooth w/o using extra cement as on ceiling complete all as specified and as directed by Engineer-in-Charge.

M&L 15 mm thick rough cast plaster in Cement mortar 1:4 consists of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with course sand and cement in the ratio of 1:1:1 complete all as specified and as directed by Engineer-in-Charge.Note: The rate quoted shall be deemed to include for necessary use and waste of form work if required and nothing extra shall be paid on this account).

Supply only liquid water proofing compound, ISI marked, complete all as specified and as directed by Engineer-in-Charge.

M&L Providing PCC 1:4:8 as in sub base/mass concrete type D-2 using 40mm graded stone agg complete all as specified and as directed .

M&L for 40 mm thick PCC type B-1 ( 1:2:4) 20mm graded aggregate as in pcc flooring as in surface finished with out using extra cement complete all as specified and as directed by Engineer-in-Charge.

Supply only 3mm thick glass 38mm wide glass dividing stripps laid in design as directed by Eng-in-charge

M&L Non skid Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors on 15mm thick screeding in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete. (Note:- Rates for the work as in repair of chowkhats , GI Tubings or in patches area (n.exc. 5 Sqm) deemed to be included in the item contractor shall not claim extra payment for the same)

All as per item no-40 above but on vertical surface over 10 mm thick rendering in CM (1:4) complete all as specified and as directed by Engineer-in-Charge.

M&L Non skid Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors on 15mm thick screeding in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete. (Note:- Rates for the work as in repair of chowkhats , GI Tubings or in patches area (n.exc. 5 Sqm) deemed to be included in the item contractor shall not claim extra payment for the same) complete all as specified and as directed by Engineer-in-Charge.

All as per item no- 42 above but on vertical surface over 10 mm thick rendering in CM (1:4) complete all as specified and as directed by Engineer-in-Charge.

M&L for 10 mm thick Vitrified colored tiles of size n.exc. 0.36 Sqm as in floors over 15 mm hick screed in CM 1:6 jointed in neat cement slurrry and pointed in white cement sluurry to match the shade of existing surfaces.(Note:The contractor shall have no claim on difference what so ever on shade /colour of tile).(Note:- Rates for the work as in repair of chowkhats , GI Tubings or in patches area (n.exc. 5 Sqm) deemed to be included in the item contractor shall not claim extra payment for the same)

Ditto as per Serial item no- 44 above but with 10 mm thick in CM 1:4 as on vertical surface complete all as specified and as directed by Engineer-in-Charge.

M&L for Glazed ceremic tiles white 450X300mmX7mm thick coloured,set and jointed in neat cement slurry and pointed in white cement or coloured to match colour matching with floor tiles as on vertical surfaces laid over 10mm thick cement screed in 1:4.(Note:- Rates for the work as in repair of chowkhats , GI Tubings or in patches area (n.exc. 5 Sqm) deemed to be included in the item contractor shall not claim extra payment for the same) complete all as specified and as directed by Engineer-in-Charge.

M&L for cement concrete rich colored chequered tiles machine pressed with imported pigment finish (mirror/rough cast) of size 300mmx300mmx(25 mm to 40 mm ) thick set and jointed with neat cement slurry laid over 15 mm thick screed bed in CM 1:6 complete.

M&L for Machine cut kota stone slab 18 - 20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl.rubbing and polishing laid over 15 mm thick cement screed base in CM 1:6. The joints shall be 20mm wide filled with cast in situ tarrazo with white marble chips of size up to 6mm.(Note:- Rates for the work as in repair of chowkhats , GI Tubings or in patches area (n.exc. 5 Sqm) deemed to be included in the item contractor shall not claim extra payment for the same)

All as per item No 48 above but in skirtings laid over 10mm thick backing layer in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.

M&L for providing 75 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

Sand stone slab 25-35 mm thick set jointed and pointed self faced punched dressed laid as in plinth protection laid over 15mm thick screed in CM 1:6. complete all as specified and as directed by Engineer-in-Charge.

Sand stone slab 25-35mm thick set jointed and pointed self faced punched dressed laid as in chhajas, sunshade and man holes covers set in cement mortar 1:4 incl.making chases in wall complete all as specified and as directed by Engineer-in-Charge.

M&L Granite 20 mm thick of any type work table rubbed and polised in steps,jambs,pillars,window cill, cooking plateforms and like in cement mortar 1:4 including pointing cement mortar 1:2 using marble dust with admixure of pigments to match with shade of granite over 15 mm thick screed bed of CM 1:6 complete.

Rendering 10 mm thick on fair faces of brick /stone patti or conc. Surfaces in cement mortar 1:4 even and smooth w/o using extra cement as on roof slab mixed with liquid water proofing compound complete all as specified and as directed by Engineer-in-Charge.

Preparing surface and cleaning of concrete slab by wire brushing and aplying evenly a tack coat of industrial bitumen 85/25 @ 1.70 Kg per sqm including cleaning surfaces complete all as specified and as directed by Engr-in-chanrge

150 micron polythylene sheet supplied and fixed complete all as specified and as directed by Engr-incharge

M&L for Lime conc. terracing as specified in roof treatment complete.

Extra over lime conc. Terracing for top surface trowelled smooth incl cement mixture to make homogeneous paste complete all as specified and as directed by Engineer-in-Charge.

M&L for 40 mm thick Brick tiles bedded in 15 mm thick cement and sand mortar (1:6) and joints grouted flush in cement and sand mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and as directed by Engineer-in-Charge.

M&L For PCC type B1(1:2:4) using 20 mm graded cushed stone agg as in bands/coping ,benching and the like incl form work complete all as specified and as directed by Engineer-in-Charge.

M&L for 6mm thick asbestos cement corrugated sheets in roofs, walls fixed with L-type or cranked hook bolts complete all as specified and as directed by Engineer-in-Charge.

M&L for Asbestos cement two piece adjustable ridge 6mm thick fixed with Lor J hooks / coach screws complete all as specified and as directed by Engineer-in-Charge.

M&L for rolled section /tubular section as in main and cross beams , purlins , rafters ,posts where connected to common rafter and running rails etc conforming to Fe- 410-w complete all as specified and as directed by Engineer-in-Charge.

M&L for steel Work in tubular trusses including special sahped washers etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St. 240 complete all as specified and as directed by Engineer-in-Charge.

S&F 2mm thick glass reinforced translucent corrugated sheeting with two corrugation side lap fixe with coach screw and washer in roof, wall etc complete all as specified and as directed by Engineer-in-Charge.

M&L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified. (Note - Color Sand/or as approved By Garrision Engineer)

M&L Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.(Note - Color Sand/or as approved By Garrision Engineer)

S&F in repairs 12 mm mineral fiber insulation board tiles of size 600mmx 600mm fixed in snap grid completeMake:- Armstrong,Bison and equivalent

S&F in repairs anodised aluminium snap grid frame work of size 605xx x 605mm for false ceiling including necessary notching. The snap grid shall consist of anodised aluminium main/cross tee of size 36.5 x 25 x 1.4mm weighing 0.24Kg/RM and 23.5 x 26.4 x 1.4mm weighing 0.191 Kg/RM respectively. The main and cross T section shall be jointed at junction crossing with anodised aluminium angle bracket of size 15 x 15 x 1.5mm weighing 0.12 Kg/RM fixed with suitable MS bolts, nuts and washers. The snap grid shall be supported at ends all along with wall with anodised aluminium angle of size 40 x 25 x 2mm wieghing 0.36Kg/RM fixed to wall with suitable arrangements and providing 12mm thick mineral fiber board in grid and applying two coats of synthetic enamel paint over a coat of pink primer after preparation of surfaces complete all as specified and as directed by Engr-in-Charge

S&F Composite cement ceiling board 4 mm thick in ( 595 mmX595 mm ) pannel (Make-everest or as approved ) designer ceiling conforming to IS 14862 type B cateogory three incl GI frame , grid work,hold fast,suspended with suspender along with holding down bolt complete . (Note: Ceiling board shall confirming to IS-14862 ,shall be fire resistant , Moisture resistant and ceiling shall be suspended with holding down bolts suspenders and adjusters

S & F in repairs stainless steel tubular curtain/drapery rod 25 mm dia ( in length as directed) with & including pair of projecting type fancy stainless steel brackets fixed at both ends with PVC rawl plug & steel screws on wall/beam complete all as specified and as directed .

S&F 1.25 mm thick Pressed steel frames of size 125mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns.

S&F 1.25 mm thick Pressed steel frames of size 105mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns.

S&F 2nd class hard wood 35mm thick plain framed panelled factory made shutter two panels with lock rail and panels of 9mm BWP commercial ply or 12mm veneered partical board with veneered veneering on both side .size of rails as pes IS-1003 kiln seasoned and chemically pressure treated comp all as specified.

IInd class hard wood glazed and skeleton shutters 35mm open rebated and prepared to receive glass, gauze etc, without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part I section 8, clause 8.20 (a) supplied and fixed to chowkats complete all as specified and as directed by Engineer-in-Charge.

S&F 25 mm thick Flush shutters for cupboards solid core construction, with block board core, and ply wood face panels, both faces covered with decorative face veneer with lipping to match complete all as specified and as directed by Engineer-in-Charge.

Prelaminated partical board 19/20mm medium density ,prelaminated with one side with decorative choice laqmination and other side balancing with white lamination , stitched with20 mm thick wooden bead all around fixed with screws as in shelves to kitchen almirah and cub board fixed in repair.

S&F 12 mm thick plywood, 5 ply grade BWE, type BB fixed with screws to timber frame work with 0.9mm decorative laminate type 1 of surface finish, colur and pattern as approved fixed with approved adhesive as per maker,s instructions complete all as specified and as directed by Engineer-in-Charge.

S&F factory made mild steel Window box type with side huge shutters incl pintol hinges,steel handles, steel peg stay and all locking arrangement and one shop coat of red oxide primer complete all specified. Note : i) The window shall be fabricated as per Drg No CEBTZ/TD/888R & 889 ii) MS fillets, glazing, wire gauge shall be measured and paid separately iii) opening incl provn shutter for cooler to be provided

Steel windows with side hung shutter incl box type hinges with steel handle handle of MS flat welded to the frame incl.MS 100dia tower bolt welded to the frame over a piece of MS flat and peg stey with glazing bars . Making good and fixing of windows with P.C.C 1:3:6 Type C-2 included in the item

Steel windows with side hung shutter incl box type hinges with steel handle handle of MS flat welded to the frame incl.MS 100dia tower bolt welded to the frame over a piece of MS flat and peg stey without glazing bars .Making good and fixing of windows with P.C.C 1:3:6 Type C-2 included in the item

Steel ventilators or windows fixed type with glazing bar.Making good and fixing of windows with P.C.C 1:3:6 Type C-2 included in the item

S&F framed work such as grills ,framed guard bars barred iron doors ;ladders framed balusters railings and similar work conforming to Fe290 Gde -E-165 complete all as specified and as directed by Engineer-in-Charge.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified and approved.

S&F factory made solid panel PVC door shutter with MS square tube 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC sheet stirip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top,lock and bottom rail on either side & as gap insert for top rail & bottom rail .panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement S&F in the frame at site as per specification.

S&F anodised aluminum door window frames ,other sections for doors , windows , ventilatorswith one or more rebates , channel for sliding shutters , grills etc including jointing cleats for fixing etc , complete all as specified. .

S & F in repair aluminium channel with rubber gasket of suitable size and thickness as required at site for fixing glass in aluminium door/windows complete all as specified and directed by Engineer-in-Charge.

S&F in repair sheet glass 5.5 mm thick ordinary quality & glazing with rubber gasket in squares exc 0.5sqm in each pane as in aluminium door/window complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium anodised barrel tower bolt of extruded section of 150mm complete all as specified and as directed by Engineer-in-Charge.

S&F mild steel butt hinges medium weight cold rolled mild steel of 100mm complete all as specified and as directed by Engineer-in-Charge.

S & F in Repair Piano Hinges mild steel ,bright finish width of flaps open in 40mm all as specified and directed by engineer in charge

Aluminium handles cast type anodised of 150mm

S&F mild steel sliding door bolt plate type stove enameled black with bright bolt not less than 12mm dia with and incl. A minimum of 6bolts and nuts four on bolt plate and two on staple plate of 250mm long complete all as specified and as directed by Engineer-in-Charge.

S&F mild steel barrel tower bolt ,stove enamelled black with bright bolt of 150mm complete all as specified and as directed by Engineer-in-Charge.

S&F mild steel pressed handles oval type stove enamelled black of 150mm complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 300mm mild rat tail rod pattern springs including roller and, roller plate and welded to chowkhats and taking down old unservicabale spring, complete all as specified and directed by Engineer-in-Charge.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F as in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge.

Sheet glass 3mm thick ordinary quality and glazing with oil putty in square not exc.0.5sqm in each pane complete all as specified and as directed by Engineer-in-Charge.

S&F in repair MS steel window handles (left/right) fixed to steel windows including reveted / welding if required complete all as specified by Engineer- in - Charge.

S&F in repair, MS peg stay for steel window complete all as specified by Engineer- in - Charge.

M&L for welding in repairs n.exc 2.5 cm in length and not exceeding 6mm thick of metal complete all as specified and directed by Engineer-in-Charge.

S&F in repair Hasp and staple 100mm safety type,Aluminium anodised,withmild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified by Engineer- in - Charge.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor; overall length of cover plate 150mm complete.

S&F anodised aluminum American handle cast type 200mm for doors complete all as specified and as directed by Engineer-in-Charge.

S&F anodised aluminum handle cast type 100mm collapsible type complete all as specified and as directed by Engineer-in-Charge.

S&F anodised 75mm size butt hinges , type C21 extruded aluminum alloy ISI marked complete all as specified and as directed by Engineer-in-Charge.

S&F 100 mm long Butt hinges extruded aluminium alloy , with galvanised mild steel hinge pin, anodised, type B-21, ISI marked complete all as specified and as directed by Engineer-in-Charge.

S&F Aluminium anodised, barrel tower bolt of extruded section, size 150 mm, complete all as specified and as directed by Engineer-in-Charge.

S&F anodised aluminum handle cast type 100mm complete all as specified and as directed by Engineer-in-Charge.

S & F in repair pivot of suitable size and thickness as required at site for aluminium door complete all as specified and directed by Engineer-in-Charge.

S & F in repair for door closer hydraulically regulated , designation No 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 KG and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair brass 4 lever mortice lock, vertical type size 100mm suitble for existing aluminium door complete all as specified and directed by Engineer-in-Charge.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover, govering pivot made of brass other parts made of mild steel heavy duty and fixed

Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete

Attending complaints of rolling shutters making functional by providing greasing oiling , welding etc.including taking down rolling shutters or hood if required complete all as specified and as directed.

S&F safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed by Engineer-in-Charge.

S&F Ball bearing for rolling shutters complete all as specified and as directed by Engineer-in-Charge.

S&F Tubes galvanised medium grade with all fittings fixed to walls or laid in floors 15mm dia complete all as specified and as directed by Engineer-in-Charge.

S&F 20mm bore tubes medium grade galvanised with all fittings and fixed to walls or laid in floors including taking down old.

S&F Rotational moulded polythene ISI marked water storage tank (cylindrical vertical with closed top)hoisted and fixed in position of 500 ltrs incl dismantling including dismantling existing.

S&F Rotational moulded polythene ISI Marked water storage tank (cylindrical vertical with closed top)hoisted and fixed in position of 1000 ltrs incl dismantling including dismantling existing.

S&F Ball valve high pressure of PTMT with epoxy coated almn rod and high density plastic ball screwed for iron pipe and fixed fixed in repair.of 20mm Make : Prayag or equivalent.

S&F Ball valve high pressure of PTMT with epoxy coated almn rod and high density plastic ball screwed for iron pipe and fixed fixed in repair.of 15mm Make : Prayag or equivalent.

S&F Stop valve cast copper alloy with crutch or butter fly handle screwed both ends & screwed for iron pipe of 15mm dia fixed in repair.

S&F in repairs stop valves cast copper alloy chromium plated fancy type/concealed type 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F Bib taps cast copper alloy with crutch or butter fly handle screwed for iron pipe for 15mm bore dia of pipe fixed in repair.

S&F in repairs bib taps cast copper alloy chromium plated fancy type 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

Bib taps standard of PTMT any colour high pressure screwed for iron p[ipe and fixed of 15mm fixed in repair Make : Prayag or equivalent.

S&F in repairs pillar taps cast copper alloy with capstan head, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S&F Stop valve cast copper alloy(concealed type) with crutch or butter fly handle screwed both ends & screwed for iron pipe of 15mm dia fixed in repair.

Angle valves, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down high pressure, screwed both ends for 15 mm bore dia iron pipe or for union, ISI marked, supplied and fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F Vitreous china wash down water closet Orissa pattern white padestal pattern of size 550x440mm including integral foot rest excluding flushing cistern and flush pipe) incl. P or S trap comp all as specified and fixed in repairs. Make Parryware/Cera/Hindware

S&F in repairs PVC flushing cisterns 10 ltrs capacity including flushing pipe and connections complete . Make : CERA ( CAT No: B1010108 , or equivalent in Parryware ,Jaquar, Hindware as approved by Eng-in-Charge .

Plastic water closet seat cover white/coloured ,closed pattern with flat bottom pattern and cover and mild steel chromium plated or aluminium hinging device fixed in repair complete all as specified and as directed by Engineer-in-Charge.

S&F wash hand basin vitreous china size 550x400mm white flat back as approved by GE ,waste,chain plug,pvc connection, pvc waste pipe comp all as specified fixed in repair complete all as specified and as directed by Engineer-in-Charge.

S&F viterous China urinal half stall type white including CP spreader, waster pipe etc complete all as specified and as directed by Engineer-in-Charge.

S&F PVC connection of PTMT nuts 15x600mm long fixed in repair complete all as specified and as directed by Engineer-in-Charge.

S&F PVC connection of PTMT nuts 15x450mm long fixed in repair complete all as specified and as directed by Engineer-in-Charge.

S&F kitchen sinks with drainage board made of stainless steel 1mm thick with plugs, washers and waster, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and conneting union to pipe overall size 915mm x 460mm bowl size 410 x 330 x 160mm complete all as specified and as directed by Engineer-in-Charge.

S&F Chromium plated soap dish complete all as specified and directed by Engineer-in-charge.

S&F Vitereous china wash down water closet pan (Pedestal pattern) white including trap bolts etc complete including connections to drain and anti siphonage pipe complete all as specified and as directed by Engineer-in-Charge.

S&F CP Health Faucet fixed type suitable for EWCs with 1,5 mtr stainless steel tube complete all as specified and directed by Engineer-in-charge of MAKE : JAQUAR, PRAYAG

S&F CP toilet paper holder fancy type complete all as specified and directed by Engineer-in-charge.MAKE: JAQUAR OR EQUIVALENT as approved by Eng-in-Charge .

S&F Towel ring of cast copper alloy chromium plated fixed and repair ( CAT PART NO: BA-02 , MAKE: PRAYAG) or equivalent in Jaquar , Parryware as app by Eng-in-Charge.

S&F two way angle cock of cast copper alloy chromium plated fixed and repair ( CAT PART NO: 7211 , MAKE: PRAYAG) or equivalent in Jaquar , Parryware as app by Eng-in-Charge.

S& F Waste pipe 32mm for WHB with coupling fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F Central hole basin mixer for hot and cold water brass chromium plated screwed down with long sunk and fly nuts screwed for 15 mm dia (( CAT PART NO: 7250, MAKE: PRAYAG) or equivalent in Jaquar , Parryware as app by Eng-in-Charge.

S & F Waste pipe 40 mm for SINK with coupling fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

S& F in repair internal fitting of PVC low level cistern as per existing pattern to make the PVC low level cistern fully functional complete all as specified and as directed by Engineer- in - Charge.

S&F in repair PVC (SWR) floor trap plain 75mm dia with PVC grating including jointing with solvent cement complete all as specified and directed by Engineer- in - Charge.

S& laying PVC(SWR)single socketed in any length with rubber ring joint fixed with wall of 110mm as in rain water pipe complete all as specified and as directed by Engineer-in-Charge.

S& laying PVC(SWR)single socketed in any length with rubber ring joint laid in floors of 110mm as in rain water pipe complete all as specified and as directed by Engineer-in-Charge.

S & Laying PVC(SWR)single socketed in any length with rubber ring joint fixed with wall of 75mm complete all as specified and as directed by Engineer-in-Charge.

S & laying PVC(SWR)single socketed in any length with rubber ring joint laid in floors of 75mm complete all as specified and as directed by Engineer-in-Charge.

S &F PVC SWR branch piece single equal or unequal 110mm with owl access complete all as specified and as directed by Engineer-in-Charge.

S&F PVC SWR branch piece single equal or unequal75mm with owl access complete all as specified and as directed by Engineer-in-Charge.

S&F PVC SWR S trap laid and jointed to 110 mm bore PVC pipes complete all as specified and as directed by Engineer-in-Charge.

S&F PVC(SWR) bends any radius 110mm. With owl access complete all as specified and as directed by Engineer-in-Charge.

S& F PVC(SWR) bends any radius 75mm. With owl access complete all as specified and as directed by Engineer-in-Charge.

S&F in repair pvc cowls , 75 mm dia complete all as specified and as directed by Engineer-in-Charge.

Cutting chases,pinning in making good to facing where requried and pointing in cement mortar 1:3 to ends or edge of landings,steps,cills,sunshade,shelves, lintel etc. tubes or concealed conduit etc. and making good, cutting not exc 10 cm girth complete all as specified and as directed by Engineer-in-Charge.

Preparing new decorated surfaces plastered/unplastered by brooming down etc and applying two coat of distemper oil emulsion on walls inner site including cornices pilasters etc complete all as specified and as directed by Engineer-in-Charge.

Preparing old finished surfaces of walls including cornices, pilasters etc and applying one coat of distemper oil emulsion, white or tinted as directed by the Engr in Charge.

Preparing surfaces of plaster or unplaster new and applying two coat of ccement based paint complete all as specified and as directed by Engineer-in-Charge.

Preparing old decorated surfaces treated with cement base paint of walls cornices pilaster etc and applying one coat of cement base paint (Ist quality) in plain pattern on walls complete all as specified.

Preparing surfaces of plaster or unplaster new and applying two coat of white wash on walls.complete all as specified and as directed by Engineer-in-Charge.

Ditto as per item no- 168 but as on ceiling

Preparing surface of wood of any desc over 10cm width ot girth and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Preparing surface of steel of any desc over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.

Preparing surface of steel of any desc over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.

VIJAY KUMAR SHARMA