Repair/ Replacement of External Water Supply and Misc works at Mil Stn Sangrur under GE (South) Patiala

Amount

Excavation in trenches in Hard/Dense soil not exceeding 1.50 metre wide & not exceeding 1.50 metre deep for foundation ,for laying of water supply pipe line in trenches and getting out including dressing/trimming sides and levelling, grading and ramming of bottom of excavation complete, all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, excavated soil in trenches after pipes have been laid and tested, complete all as specified and directed.

Removing excavated surplus spoil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Cutting of road /PCC path upto the depth of pipe & making good the disturbed surface with PCC 1:2:4 (20 mm aggregate) using extra cement including earth work complete all as specified and directed.

Taking up or down steel water tubing, 80 mm bore including fitting connections and cleaning tubing, fitting/ cutting threading of serviceable tubing for relaying and removal of unserviceable tubing all as directed by Engr-In- Charge.

Same as serial item no 5 but 50 mm dia

Same as serial item no 5 but 40 mm dia

Same as serial item no 5 but 25 mm dia

Same as serial item no 5 but 20 mm dia

Steel water tubing, 80 mm bore, medium grade, galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

Same as serial item no 10 but 50 mm dia

Same as serial item no 10 but 40 mm dia

Same as serial item no 10 but 25 mm dia

Same as serial item no 10 but 20 mm dia

Fixing/laying only water tubing, 50mm bore, fixed to walls and ceiling or laying in floors , with new fittings & fixtures to make it functional complete all as specified and directed.

Same as serial item no 15 but 40 mm dia

Same as serial item no 15 but 25 mm dia

Same as serial item no 15 but 20 mm dia

Fixing only Gun metal globe or gate valve, 50mm bore (Class-I) ISI marked, with iron wheel head screwed both ends for iron pipe complete fixed as in repair all as specified and directed.

Fixing only Gun metal globe or gate valve, 40mm bore (Class-I) ISI marked, with iron wheel head screwed both ends for iron pipe complete fixed as in repair all as specified and directed.

Fixing Gun metal globe or gate valve, 25 mm bore (Class-I) ISI marked, with iron wheel head screwed both ends for iron pipe complete fixed as in repair all as specified and directed.

S&F Gun metal globe or gate valve, 50 mm bore (Class-I) ISI marked, with iron wheel head screwed both ends for iron pipe complete fixed as in repair all as specified and directed.

S&F Gun metal globe or gate valve, 40 mm bore (Class-I) ISI marked, with iron wheel head screwed both ends for iron pipe complete fixed as in repair all as specified and directed.

S&F Gun metal globe or gate valve, 25 mm bore (Class-I) ISI marked, with iron wheel head screwed both ends for iron pipe complete fixed as in repair all as specified directed.

S&F Gun metal globe or gate valve, 20 mm bore (Class-I) ISI marked, with iron wheel head screwed both ends for iron pipe complete fixed as in repair all as specified and directed.

Taking out cast iron pipes of 150 mm dia incl all fittings complete all as specified and directed.

Supplying, laying,jointing, field testing & commisioning complete at site as per specification of centrifugally cast ductile iron pressure pipe (S& S) "class K-7", 150 mm dia, ISI marked for water conforming to IS 8329/2000 with push on type rubber gasket jointing as per IS 5382 specification. pipe shall be outside zinc coated with finishing layer of bitumen & have factory cement mortar lining as per IS 8329/2000. the rates include cost of material,labour required,transportation,loading/unloading etc. Note:-excavation of trench,earth work, DI fittings,lead joints will be measured & paid separately under respective items however rate of rubber tyton joints shall be included in this item.

Material & labour Ductile Iron fittings upto 150 mm bore class 'A' such as bends (any type, radiius& angle) tapers of any type , duck foot bend, tee pieces, single branch, y junction & collar etc one end flanged & other socket or both end socket as per requirements complete with lead wool joint all as specified and directed. Note:-excavation of trench,earth work ,lead joints will be measured & paid separately under respective items.

Material and labour for Lead joint for water supply spigot&socket CI pipe complete all as specifed and directed by Engr in charge upto 150 mm bore dia pipe complete all as specified & directed, old lead retrieved may be used by contractor. Extra lead shall be arranged by contractor.

Construction of brick masonary valve pit of size 1200x1200x1200mm (Internal dimension) incl necessary earth work and MS sheet 3 mm thick cover with angle iron frame 40 mm x 40 mm x 6mm including provision of suitable hold fasts to hold the frame, locking arrangement and lifting handle, duly painted with two coats of synthetic enamel paint over a coat of red oxide primer all as shown in drg held with GE office complete all as specified directed.

Same as serial item no 30 but pit size900x900x900mm

S&F Cast iron sluice valve, 150 mm dia conformig to IS - 14846, PN 1.6, clockwise dosing with flanged ends and iron wheel including necessary joints by means of bolts, nuts washers and rubber gaskets complete including taking down old unserviceable sluice valve all as specified and directed.

Same as serial item no 32 but of 100 mm dia.

Same as serial item no 32 but of 80 mm dia.

Disamantling joints of flanged pipes in position including removing old rubber fiber board gasket bolts , nuts etc bore of pipes in 150 mm and reassembling of joints of flanged pipes in position with new rubber or fiber board gasket bolts nuts & washers all as directed.

Supply & fixing gland packing fiber board gasket for sluice valve of 150 mm / 100mm /80 mm dia including taking down of old gland packing all as specified & directed

Taking out unserviceable wheel shaft of cast iron sluice valve from pit /column pipe of 150 mm/100 mm/80 mm dia & carrying to the workshop for cutting, threading, grinding etc & refixing the same after repair complete all as specified & directed by Engineer-in-charge.

Drilling of CI/DI water line for connection of 15 mm to 40 mm GI pipe with clamp complete all as specified & directed.

Taking down old unserviceable non return valve of 150 mm dia from existing position and supply & fixing cast Iron non return valve of 150 mm dia conforming to IS 14846 with flanged ends including necessary joints by means of bolts and nuts washers and rubber gasket complete all as specified & directed.

Supply only sodium hypochlorite solution as per the specifications of IS and as directed by the Engineer-in-Charge complete all as specified and directed.

Supply, installation, testing and comissioning of chemical dozing system of capacity 4 Ltr/Hr, 1.5 Mtr head complete with all standard accessories such as connecting pipe, NRV etc including one 100 Ltr chemical storing container.

Dismantling chemical dozing pump, overhauling and repairing to make it fully functional including replacing the worn out parts whatever the parts may be , fixing in original position and testing complete all as specified and directed.

Detecting the leakage from underground CI pipe 150 mm bore and rectifying the leakage by burrning out existing lead and redoing the joint by adding extra lead if required complete all as directed.

Detecting the leakage from underground CI pipe 100 mm bore and rectifying the leakage by burrning out existing lead and redoing the joint by adding extra lead if required complete all as directed.

Detecting the leakage from underground CI pipe 80 mm bore and rectifying the leakage by burrning out existing lead and redoing the joint by adding extra lead if required complete all as directed.

M&L for painting steel or iron surface of any description wih two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for MS sheet pit cover of 3.15 mm thick along with angle iron frame,locking arrangements and necessay civil works including taking up old iron cover complete all as specified and directed.

Supply conecting and testing and comissioning complete electric cable PVC insulated and PVC sheathed water proof 3 phase 3 core AC 1100 volts grade 16 sqmm starnded copper conductor suitable for submersible pump including making connection to pump set as well as to control panel complete including taking out old cable all as directed.

(A) Lifting up submersible pump set of any capacity along with MS column flanged pipe 150 mm /125 mm /100 mm dia bore and submersible cable 3 core of size upto 25 Sqmm from existing bore well at different loaction including dismentelling cable joints etc complete all as specified and directed upto 50 mtr depth Note :- (i) Submersible cable, column pipe to be stacked in suitable place at pump house for ecking/inspection cleaning properly. (ii) All T & P shall be arranged by the contractor. (B) Lowering of submersible pump set of any capacity alongwith MS column pipe 150 mm dia, making flanged joints , cable connection and providing necessary binding dori for binding and dacking the submersible cable complete all as specified and directed depth upto 35 mtr.

(A) Shifting unserviceable pumping set of 30 to 45 HP capacity to work shop for repairs and bringing back to site complete all or directed. (B) Dismantling of pumping set for inspection and identification of serviceable and unserviceable parts by Engineer-in-Charge for repairs and over hauling and re-assembling after replacement of unserviceable serviceable parts complete as specified and directed Make : Colama/KSB/SSI/BS. Note :- (i) Rate quoted for the above item shall include labour for prefixing of serviceable and fixing of new parts under respective items of Schedule 'A', welding (C) Welding , turning and polishing of main pump shaft complete all as directed. (D) Rewinding of 30 to 45 HP motor stator with existing size and gauge of PVC insulated copper winding wire and insulating material complete all as specified and directed Make of winding wire : FINOLEX/CCI. (E) Rubber gasket with 8 Nos holes made out of 6 mm thick superior quality neoprene sheet suitable for 150 mm bore pipe flanged joints . (F)Supply and fixing motor pump coupling with key (G) Supply and fix of G M impeller (H) Supply and fix of GM neck ring (J) Roter welding , turning ,polishing including balancing complete all as specified and directed Note : The quoted rate shall include repair/replacement work covered in (A) to (J) above.

Automatic star delta starter panel moounting type complete3 phase 415 volt upto 45 HP capacity complete fixed as in repair all as specified directed.

Detecting the leakage from UG pipe and rectifying the leakage by means of elbows, Tees, sockets etc for the GI pipe 15 mm to 50 mm bore line including cutting /threading and other alliedd work including earth work and replacement of elbows,Tees , sockets etc complete all as directed.

Detecting the leakage from UG pipe and rectifying the leakage by means of 'D' joints , clamps, sockets etc for CI pipe 150 mm/100 mm/80 mm dia including cutting /threading and other allied work including earth work complete all as directed.

Replacement of Pressure Guage of capacity 0 to 10 Kg/cm2 . ISI marked complete all as specified .

Supply, lowring, jointing testing and commissioning column pipe heavy duty 150 mm dia ERW type (3mtr) long with both ends threaded and fitted with heavy duty MS flanges 25mm thick two Nos groves for submersible cable continuous welded and drilled 6/8Nos hole conplete with and including jointing material such as bolts nuts, washers and rubber gasket etc complete including taking out old unserviceable pipe all as specified and directed.

MCCB, 200 Amps 4 Pole, ,with adjustable thermal magnetic setting,415 volt breaking capacity 36 KA including taking down the old one.

MCCB, 125 Amps 4 Pole,with adjustable thermal magnetic setting, 415 volt breaking capacity 25 KA including taking down the old one.

M&L cleaning of RCC overhead reservoir of capacity 100000 gallons through Mechanical tank cleaning process by involving the following six(6) stages of cleaning process and as directed by Engr-in-charge:- P/H-2 , P/H-3, P/H-4 a) De-watering by high pressure submersible pump all complete b) Total removal of sludges by suction pumps all complete. c) Cleaning of walls,ceiling and floor by high pressure jet of 80-180 bar pressure all complete d) Removal of addl. sludge by industrial vacuum pump all complete. e) Antibacterial treatment of inside of tank to make it complete bacteria free and all complete. f) Treated with ultra violet radiator to make it complete bacteria free all complete. Note:- (1) Entire T&P should be arranged by the contractor at their own.Only electric power & water shall be supplied by MES at stipulated rate. (2) (a) Date of cleaning ,(b) Capacity of tank (c) Height of staging, should be written over the outer surface of tank by synthetic enamel paint with lettering not less than 100 mm height.Cost of the same is deemed inclusive in the quoted unit rate of cleaning of tank.

All as per item 60 above but of capacity 30000 gallons capacity.PH at Children School.

AR CONSTRUCTIONS