GE/U(N)-58/2023-24 PROVN OF HARDSTANDING AT SHQ CELL WATER STORAGE TANK AT SA/APPCH WAYS CONNECTING TO TOILETS INFRONT SIDE BACK OF BLDG NO P01 P02 P04 P05 P06 P07 NP51 NP52 AT TC INCL 20 CEILING FANS ANIMAL LINE SHED PET CLINIC AT AFVH GE(N)UDH

Amount

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) with old size bricks complete all as specified and directed by Engr-in-Charge.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) with old size bricks complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick in cement mortor 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed by Engr-in-Charge.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or gorged into spikes, framed guard bar, barred iron doors; ladder, framed balusters; railing; frame work for water tanks, cooler stand etc and similar work conforming to Fe 290 or Gde-E-165, complete all as specified and directed by Engr-in-Charge.

M&L for Preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-Charge.

Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed by Engr-in-Charge.

Reinforced cement concrete, 1:11/2:3, type A-1 (using 20 mm graded stone aggregate) as in beams, coloumns and slabs supported on walls, beams and columns in floor, roofs, landings, balconies, canopies, shelves and like complete all as specified and directed by Engr-in-Charge.

M & L for Formwork to sides and soffits of suspended slabs such as roof slabs, floor slabs, beams landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed by Engr-in-Charge.

All as per Srl Item No 08 but edges of slab exc 10cm but not exc. 20cm wide complete all as specified and directed by Engr-in-Charge.

M&L for TMT bars 8mm dia and over cut to length bent to shape required including cranking bending spirally for hopping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia confirming to TMT bars complete all as specified and directed by Engr-in-Charge.

S&F 75 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamps, all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bends 75 mm bore any radius with oval & access door complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bends any radius in 110 mm dia complete all as specified and directed by Engr-in-Charge.

PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed by Engr-in-Charge.

Taking up or down 15 mm bore steel tubing, connections and removal complete all as specified and directed by Engr-in-Charge.

Taking up or down 25 mm bore steel tubing, connections and removal complete all as specified and directed by Engr-in-Charge.

S & F 15 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes etc., laid in trenches/ fixed on walls as specified and directed by Engr-in-Charge.

S & F 25 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes etc., laid in trenches/fixed on walls complete all as specified and directed by Engr-in-Charge.

S & F in repairs for 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed by Engr-in-Charge.

S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed in position complete all as specified and directed by Engr-in-Charge.

S & F GI Unions,20mm dia brass to connect iron to polyethylene and fixed as specified.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends swan necks, etc, including cleaning or re-fixing or removal to store (measured overall as fixed along the centre line over fitting and accessories) as specified and directed by Engr-in-Charge.

S& F 25 mm Gun metal, global or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

Surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in any type soil complete all as specified and directed by Engr-in-Charge.

Excavating in trenches in hard/dense soil, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out hard/dense soil complete all as specified and directed by Engr-in-Charge.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engr-in-Charge.

Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point turning, filling in including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engr-in-Charge.

Broken stone hardcore of gauge exceeding 63mm and not exceeding 100 mm, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and directed by Engr-in-Charge.

100 mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed by Engr-in-Charge.

Machine pressed vibro mechanically floated interlocking cement paver block ISI marked any shape and size conforming to IS 15658-2006 of 100 mm thickness, M-50 Grade, with topping of cement mixed with improted pigment. Laid over & including 50mm thick sand cushioning including well ramming, complete all as specified and directed by Engr-in-Charge. Shape shall be approved by Engr-in-charge.

Providing, Pre cast cement concrete 1:2:4 type B-1 (20mm graded) as in kerb stones and in similar works bedded and jointed in cement morter 1:4, complete all as specified and directed by Engr-in-Charge. (Size : to be approved by Engr-in-charge.)

Surfaces of any description over 10cm girth or width, not otherwise described over 10 cms width or girth and applying two coats of synthetic enamel paint over and including a coat of cement primer complete surface.

Plain cement concrete (1:4;8) type D-2 using 40mm graded agg as in drain, footpath, manholes, foundation and any other work complete all as specified and directed by Engr-in-Charge.

15 mm thick rendering in two layer (10mm + 5mm) on fair faces of brick concrete on wall including facia, chhajja etc. Surfaces in cement mortar 1:4 and finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.

Plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in surface channels incl necessary formwork complete all as specified and directed by Engr-in-Charge.

Providing cement concrete 1:2:4 type B-1 (20mm graded crushed stone aggregate) as in coping incl necessary formwork, complete all as specified and directed by Engr-in-Charge.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl forms, moulds, mi-tred/stopped ends etc. complete all as specified and directed by Engr-in-Charge.

Pre-cast cement concrete 1:2:4 type B-1 (20mm graded aggregate as in cover slabs for man holes etc) chullah hoods chajjas, water troughs, mangers, shelves and similar articles with plain faces incl all moulding but excluding frame and in similar works bedded and jointed in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

S&F Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete GDE Fe410-0 or Fe 310-O

S&F Mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut in any sizes complete all as specified and directed by Engr-in-Charge.

75 mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed by Engr-in-Charge.

Machine pressed vibro mechanically floated interlocking cement paver block ISI marked any shape and size conforming to IS 15658-2006 of 80 mm thickness, M-40 Grade, with topping of cement mixed with improted pigment. Laid over & including 50mm thick sand cushioning including well ramming, complete all as specified and directed by Engr-in-Charge. Shape shall be approved by Engr-in-charge.

M&L 300 mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed by Engr-in-Charge.

M&L for plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in sides of pipes, foundation, filling and mass concrete etc complete all as specified and directed by Engr-in-Charge.

M&L for point wiring with PVC insulated unsheathed, FRLS 1100 volts grade stranded copper conductor cable single core 1.5 Sqmm for one light / fan point controlled by one way switch, and wire to be drawn in and including rigid pvc concealed conduit of dia not less than 20mm of 2mm wall thickness complete with all accessories including GI annealed metal box 1.2 mm thick switch board of suitable size be fixed flush wall, with 3 mm thick ebonite sheet cover and necessary screws, cap washers etc. or to be fixed on wall respectively as directed by EIC and providing earth continuity wire using PVC insulted, un-sheeted single core stranded copper conductor FRLS cable of size 1.5 Sqmm.

Supply and fix ceiling fans , complete with three blade , down, rod, without fan regulator and with all accessories 230v, 1200mm sweep , ISI marked ,min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Make Havells/ Usha/ Crompton

S &F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. As reqd.

S & F switch piano, flush type, One way, single pole, 5 Amps, suitable for 240 v, 50 Hz, AC supply complete all as specified and directed by Engr-in-Charge.

S&F Ceiling rose, 3 terminal, PVC/ polycarbonate, isolated body complete all as specified and directed by Engr-in-Charge.

Dismantling water tank exceeding 250 & not exceeding 500 ltrs and removing from site complete all as specified and directed by Engr-in-Charge.

M/S IMTESH BHAT

JOGINDER SINGH

jyoti parkash sharma